Legacy Windows Archive ( Read Only )

What is Full USENET Designation? Need to cross-post a question, which requires the full designation. Can you give an example? We are accessing these forums from the Foxfire browser. Thanks.

I copied virtual disk (.vhd) to another location and crated new Virtual machine and connected it to the copied disk. The vhd had Windows 2003 installed and after the start of new machine I got Local area connection 3. The original vhd had Static IP number and it had local area connection. Hot change it? The settings are exact the same. Another question how to change the SID of the new virtual server 2003? Regards MarcusB

We have 3 file servers running windows 2003 and 2008 on HP proliant servers. We need more disks in arrays. We have been using so far RAID 0+1. Is it possible to add extra disk to RAID 0+1 array and extend the size of the existing logical drive? Or we need to change to RAID 5 level. We have know two RAID 0+1 arrays: One array: 500 GB SATA disk 500 GB SATA disk Second Arrays: 1TB SATA disk 1TB SATA disk Can we add 4 1TB disks (2 to each array) and extend the logical drive size? We have Smart Array controlers P800 on all our servers MarcusB ------------------------------------------------------ Hosted by: http://zmiany.bloog.pl/

I am trying to get rid of this context software, like file grabber et al and there's no uninstaller available anywhere in site to be seen. Their website is poor at best for such information and I really want to get rid of this crap. Any help is greatly appreciated. Thank you.

Hi, we have serious issue with the new feature "Easy Print" in 2008 server. The problem is that the physical margins of the local/client printers are not carried over to the easy print driver on the TS. This is not a big issue with all software that has a proper page setup dialogue with settings for all 4 margins. The problem arises with software that depends on the physical margins set in the print driver to place the print correctly. Is there any settings for this? Like "Use physical margins from printer driver", somewhere in registry perhaps, or in a settings file. I have spent a few days trying to make this work and I'm running out of ideas... Mayb…

"Caveat: Quantity is not necessarily a measure of Quality" Newsgroup.................: microsoft.public.win2000.general Stats Were Taken..........: Mon, 20 Oct 2008 08:00:07 GMT Stats Begin...............: Mon, 13 Oct 2008 08:22:52 GMT Stats End.................: Mon, 20 Oct 2008 06:10:49 GMT Days......................: 7 Total No. of Articles.....: 96 Total No. of Characters...: 239503 Total Volume..............: 233 Messages Per Day..........: 13.7 Characters Per Day........: 34214.7 Average Daily Volume......: 33 kB Total Posters This Week...: 28 Messages with Sigs........: 22.92% Original Content Rating...: 44.99% Top 10 Prolific Po…

Hi I have windows server 2003, the clients are Win XP - all are updated. The disks are mapped using "net use ..." in a bat file. Sometimes the win xp client don't have any driveletters to the mapped disks afther a logon and can't start apps on the shared disks. They doubleclick on an icon pointing to the logonscript - then everything is ok. Can you help mee troubleskoot this case - I have little info and no eventfiles now. Tor-Magne

I am trying to connect from a Windows XP SP3 workstation to a Windows Server 2003 SP2 server using Remote Desktop Connection client. I have version 6.0.6001 on the XP workstation. On connection, I receive the following error: "This computer can't connect to the remote computer. Try connecting again. If the problem continues, contact the owner of the remote computer or your network administrator." After receiving the message, we logon to the server from the console and run a netstat and see that 3389 is not listening. Also, if we run tsadmin and go to sessions, we do not see an RDP-Tcp session listed. I do not always receive this message, sometime…

I don't know why when I brower the web, my ie always popup an error message. If I rely the message, my ie will be closed. ps.The information of ie is 6.0 sp2 Thanks!

Please advise if this issue should be addressed in another newsgroup. My OS: WinXP Pro SP3 (fully patched and updated to current status). My Browser: IE7 (fully updated and patched). <http://*.microsoft.com/> is added to the 'Trusted Sites' zone. Some time ago (I forget when but it was after installing SP3) I downloaded/Installed: Microsoft Silverlight 1.0.21115.0 and a few weeks ago accessed: http://www.microsoft.com/emea/spotlight/sessionh.aspx?videoid=359 and I was able to see the video presentation without any problems. Today I wanted to see this video presentation again but wasn't able to because of this: Silverlight error message ErrorCo…

Just replaced the cmos battery, but still get this message, (and the clock/date still doesn't work properly, I really need it to). "Calendar can't find one or more of the files it needs to run. Run the calendar set up program again to install the missing files..." my problem: I don't have any discs with the laptop (Toshiba Satellite Pro 430CDT (PA1230U-T2C). It runs WIn98 (don't have that disk either). The laptop also doesn't have internet. I would download something on my good laptop to CD, then run it on the TOshiba. But not sure how do to this? and what to download? Any help is GREATLY and gratefully appreciated, you guys are terrific! -Kat…

Hello there, i would like to download and install all avalabile originally desined microsoft windows xp software, which is available for my system with a download manager or something like that. Do someone understand what i am wanting to do and could give me an adress of this kind of tool. I only want all the betas, and the convience software from there site with a free to test and can be run on an windows media cent3er 2005 editon. Any help is very appriciated.

Pc: XP/SP3 4 G. RAM Office 2007- Internet Explorer 7.0 Something is going on with the clipboard on this pc, & I don't have a clue where to look for the problem with it. I use Photobucket to store pictures & images all the time, suddenly the Ctrl/paste will not work. Instead of pasting the url for my image, it is showing text from an old Ctrl/C text sentence, not the url. I CAN use Ctrl/c and Ctrl/V in Word, Wordpad, etc. successfully, but cannot use these fuctions to copy and then paste an image into a Forum I am a member of. I have always been able to do this easily in the recent past. This particular forum, along with Photobucket, uses Dir…

I am getting a DDE Server Window:iexplore.exe - Application Error when I close out Internet Explorer. It reads The instruction at "0x77555d00" referenced memory at "0x0e2646a0". The memory could not be "read". Click on OK to terminate the program. I click on OK and it just goes away. It doesn't seem to be all the time, but often enough that it is annoying. Does anyone have an idea what the problem is?

I have WinXP. I use GOM and Windows Media Player as my two fax/picure/video clips viewer. Neither has volume turned on, when chosen. Other bells and whistle things tell me the sound card is fine What are some things I can check to see if it's something simple?