Guest Anton Jansen Posted July 15, 2007 Posted July 15, 2007 Whenever the PC goes on standby or shuts down, then powers up again, the system does not recognise the webcam. I have an Intel board and chipset. I have contacted the manufacturer of the cam on two occassions and they claim that the only way to solve the problem is to change the IRQs. I have 6 USB ports on board and everything works except the cam. Someone else suggested to upgrade the BIOS. I have had the run around on the Intel site, indentified my motherboard and chipset but there is no way I can sort this out. The only way the cam works is to unplug it (after bootup) and re-plug it. It then works. When powering down, the recognition is lost. Can anyone please assist with a positive solution to this problem.
Recommended Posts