Guest PowerUser Posted July 15, 2007 Posted July 15, 2007 Hi- I just installed new Kingston 2*1GB RAM on my Dell Inspiron 1505 (Intel Calistoga i945PM). The earlier memory was 533MHz, while the new modules are 667 MHz (They are http://www.buy.com/retail/product.asp?sku=204884016). The problem is that these modules are running at 533Mhz. I verified that the 945PM does indeed support 667 (http://www.intel.com/products/chipsets/945pm/index.htm). However, these modules are running at 533 for sure. Everest says the memory speed is really 667, however the Memory bus 'Effective clock' is 533Mhz, with the real clock being 267 (It doubles with dual channel). Before I upgraded my RAM, I had taken benchmarks (Everest cache and memory benchmarks). The new benchmarks are almost completely identical to the old ones. This seems to be something to do with the motherboard (a BIOS setting?). My BIOS is the newest version- A17. Any ideas? Please!
Guest Shenan Stanley Posted July 15, 2007 Posted July 15, 2007 Re: Geek question -RAM speed/ benchmarks PowerUser wrote: > Hi- I just installed new Kingston 2*1GB RAM on my Dell Inspiron > 1505 (Intel Calistoga i945PM). The earlier memory was 533MHz, > while the new modules are 667 MHz (They are > http://www.buy.com/retail/product.asp?sku=204884016). > The problem is that these modules are running at 533Mhz. I > verified that the 945PM does indeed support 667 > (http://www.intel.com/products/chipsets/945pm/index.htm). However, > these modules are running at 533 for sure. Everest says the memory > speed is really 667, however the Memory bus 'Effective clock' is > 533Mhz, with the real clock being 267 (It doubles with dual > channel). > Before I upgraded my RAM, I had taken benchmarks (Everest cache and > memory benchmarks). The new benchmarks are almost completely > identical to the old ones. This seems to be something to do with > the motherboard (a BIOS setting?). My BIOS is the newest version- > A17. > Any ideas? Please! If you notice the difference (even if it was reporting correctly) - you need to get out more. Faster RAM is not going to make a noticable dent in the performance of a machine unless you went from unnaturally slow RAM to unnaturally fast RAM - and then - you would have changed motherbaord/processor as well - possibly even hard disk drive and video - not by choice - but necessity. -- Shenan Stanley MS-MVP -- How To Ask Questions The Smart Way http://www.catb.org/~esr/faqs/smart-questions.html
Guest DRod Posted July 15, 2007 Posted July 15, 2007 RE: Geek question -RAM speed/ benchmarks Just curious, what is the number of CPU? T7xxx? My point is that, as far as I know, the "true" speed you will experience is the minimum between the Front Side Bus (FSB) and the RAM speed, isn't? You can put 1000Ghz RAM modules, but the if the CPU FSB is only 533, nothing will change in actual speed... Just my two cents! "PowerUser" wrote: > Hi- I just installed new Kingston 2*1GB RAM on my Dell Inspiron 1505 (Intel > Calistoga i945PM). The earlier memory was 533MHz, while the new modules are > 667 MHz (They are http://www.buy.com/retail/product.asp?sku=204884016). > > The problem is that these modules are running at 533Mhz. I verified that > the 945PM does indeed support 667 > (http://www.intel.com/products/chipsets/945pm/index.htm). However, these > modules are running at 533 for sure. Everest says the memory speed is > really 667, however the Memory bus 'Effective clock' is 533Mhz, with the > real clock being 267 (It doubles with dual channel). > > Before I upgraded my RAM, I had taken benchmarks (Everest cache and memory > benchmarks). The new benchmarks are almost completely identical to the old > ones. This seems to be something to do with the motherboard (a BIOS > setting?). My BIOS is the newest version- A17. > > Any ideas? Please! > > >
Guest PowerUser Posted July 15, 2007 Posted July 15, 2007 Re: Geek question -RAM speed/ benchmarks Perfect. That's the depressing answer (but correct) I just found out. The FSB of <this piece of junk> processor (It's a Core Duo T2050) is 533 MHz. The Motherboard supports 667 modules, but the RAM can only transmit data as fast as the processor can interact with the rest of the system. To the other poster- You *will* see a difference in benchmarks. If the memory were running at 667, the bandwidth offered would be 10.7GB/s, or 25% more than that achieved with 533MHz. And the question wasn't about a dent in performance. Those were benchmark numbers. You don't argue with numbers. PS: How easy is it to upgrade a laptop processor? lol :-) "DRod" <DRod@discussions.microsoft.com> wrote in message news:57ADBC28-6C5A-425B-B993-0838AD1597CA@microsoft.com... > Just curious, what is the number of CPU? T7xxx? > > My point is that, as far as I know, the "true" speed you will experience > is > the minimum between the Front Side Bus (FSB) and the RAM speed, isn't? > > You can put 1000Ghz RAM modules, but the if the CPU FSB is only 533, > nothing > will change in actual speed... > > Just my two cents! > > "PowerUser" wrote: > >> Hi- I just installed new Kingston 2*1GB RAM on my Dell Inspiron 1505 >> (Intel >> Calistoga i945PM). The earlier memory was 533MHz, while the new modules >> are >> 667 MHz (They are http://www.buy.com/retail/product.asp?sku=204884016). >> >> The problem is that these modules are running at 533Mhz. I verified that >> the 945PM does indeed support 667 >> (http://www.intel.com/products/chipsets/945pm/index.htm). However, these >> modules are running at 533 for sure. Everest says the memory speed is >> really 667, however the Memory bus 'Effective clock' is 533Mhz, with the >> real clock being 267 (It doubles with dual channel). >> >> Before I upgraded my RAM, I had taken benchmarks (Everest cache and >> memory >> benchmarks). The new benchmarks are almost completely identical to the >> old >> ones. This seems to be something to do with the motherboard (a BIOS >> setting?). My BIOS is the newest version- A17. >> >> Any ideas? Please! >> >> >>
Guest Shenan Stanley Posted July 15, 2007 Posted July 15, 2007 Re: Geek question -RAM speed/ benchmarks PowerUser wrote: <snip> > To the other poster- You *will* see a difference in benchmarks. If > the memory were running at 667, the bandwidth offered would be > 10.7GB/s, or 25% more than that achieved with 533MHz. And the > question wasn't about a dent in performance. Those were benchmark > numbers. You don't argue with numbers. <snip> After years of doing this and comparing the 'benchmarks' with reality - no - you won't *see* the difference in anything but that test - more than likely - especially in the case you gave (the only thing you changed was memory from 533 to 667MHz - your applications are unlikely to load any faster or refresh to the screen any faster because it is very doubtful that in the computer - that was your bottleneck of performance in the first place. ;-) ) You *do* argue with numbers - because they can be played with in so many ways to mean so many things - that the true value of them ends up being in the eyes of the presenter - not the eyes of the beholder (if they don't bother to argue.) *grin* -- Shenan Stanley MS-MVP -- How To Ask Questions The Smart Way http://www.catb.org/~esr/faqs/smart-questions.html
Guest Ken Blake Posted July 15, 2007 Posted July 15, 2007 Re: Geek question -RAM speed/ benchmarks Shenan Stanley wrote: > PowerUser wrote: > <snip> >> To the other poster- You *will* see a difference in benchmarks. If >> the memory were running at 667, the bandwidth offered would be >> 10.7GB/s, or 25% more than that achieved with 533MHz. And the >> question wasn't about a dent in performance. Those were benchmark >> numbers. You don't argue with numbers. > <snip> > > After years of doing this and comparing the 'benchmarks' with reality > - no - you won't *see* the difference in anything but that test - > more than likely - especially in the case you gave (the only thing you > changed > was memory from 533 to 667MHz - your applications are unlikely to > load any faster or refresh to the screen any faster because it is > very doubtful that in the computer - that was your bottleneck of > performance in the first place. ;-) ) > > You *do* argue with numbers - because they can be played with in so > many ways to mean so many things - that the true value of them ends > up being in the eyes of the presenter - not the eyes of the beholder I couldn't agree more with that last paragraph. The numbers may be correct, but deciding what they mean--how to interpret them--is very often nowhere near obvious, *especially* if they were presented by someone who has an axe to grind. -- Ken Blake - Microsoft MVP Windows: Shell/User Please reply to the newsgroup
Guest DRod Posted July 15, 2007 Posted July 15, 2007 Re: Geek question -RAM speed/ benchmarks I do not see the point of this "debate" about the overall role of benchmarks... The reader mentioned a very specific benchmark "Everest cache and memory benchmarks" that to the best of my knowledge (and by its very name!) does not attempt to measure "reality"....the reader is not asking for your wisdom about what real-life applications might benefit from faster memory If we were to talk about real life benchmarks, it seems obvious that the main constraint would be HDD speed in 9 out every 10 cases; but presuming he/she does not use memory intensive applications that might have benefited from faster memory it rather obnoxious if you ask me... Drod "Ken Blake" wrote: > Shenan Stanley wrote: > > > PowerUser wrote: > > <snip> > >> To the other poster- You *will* see a difference in benchmarks. If > >> the memory were running at 667, the bandwidth offered would be > >> 10.7GB/s, or 25% more than that achieved with 533MHz. And the > >> question wasn't about a dent in performance. Those were benchmark > >> numbers. You don't argue with numbers. > > <snip> > > > > After years of doing this and comparing the 'benchmarks' with reality > > - no - you won't *see* the difference in anything but that test - > > more than likely - especially in the case you gave (the only thing you > > changed > > was memory from 533 to 667MHz - your applications are unlikely to > > load any faster or refresh to the screen any faster because it is > > very doubtful that in the computer - that was your bottleneck of > > performance in the first place. ;-) ) > > > > You *do* argue with numbers - because they can be played with in so > > many ways to mean so many things - that the true value of them ends > > up being in the eyes of the presenter - not the eyes of the beholder > > > I couldn't agree more with that last paragraph. The numbers may be correct, > but deciding what they mean--how to interpret them--is very often nowhere > near obvious, *especially* if they were presented by someone who has an axe > to grind. > > -- > Ken Blake - Microsoft MVP Windows: Shell/User > Please reply to the newsgroup > > >
Guest PowerUser Posted July 16, 2007 Posted July 16, 2007 Re: Geek question -RAM speed/ benchmarks Unfortunately you've completely missed the point of this post as DRod rightly pointed out. It was about theoretical maximums not being what they should be. Nothing to do with application or overall real world system performance - It was about the benchmark numbers. "Shenan Stanley" <newshelper@gmail.com> wrote in message news:unQYSMwxHHA.484@TK2MSFTNGP06.phx.gbl... > PowerUser wrote: > <snip> >> To the other poster- You *will* see a difference in benchmarks. If >> the memory were running at 667, the bandwidth offered would be >> 10.7GB/s, or 25% more than that achieved with 533MHz. And the >> question wasn't about a dent in performance. Those were benchmark >> numbers. You don't argue with numbers. > <snip> > > After years of doing this and comparing the 'benchmarks' with reality - > no - you won't *see* the difference in anything but that test - more than > likely - especially in the case you gave (the only thing you changed was > memory from 533 to 667MHz - your applications are unlikely to load any > faster or refresh to the screen any faster because it is very doubtful > that in the computer - that was your bottleneck of performance in the > first place. ;-) ) > > You *do* argue with numbers - because they can be played with in so many > ways to mean so many things - that the true value of them ends up being in > the eyes of the presenter - not the eyes of the beholder (if they don't > bother to argue.) *grin* > > -- > Shenan Stanley > MS-MVP > -- > How To Ask Questions The Smart Way > http://www.catb.org/~esr/faqs/smart-questions.html >
Guest Bob I Posted July 16, 2007 Posted July 16, 2007 Re: Geek question -RAM speed/ benchmarks The theoretical maximum is exactly what it should be. The memory system runs at 533. The problem is the user neglected to correctly determine the theoretical maximum. PowerUser wrote: > Unfortunately you've completely missed the point of this post as DRod > rightly pointed out. It was about theoretical maximums not being what they > should be. Nothing to do with application or overall real world system > performance - It was about the benchmark numbers. > > "Shenan Stanley" <newshelper@gmail.com> wrote in message > news:unQYSMwxHHA.484@TK2MSFTNGP06.phx.gbl... > >>PowerUser wrote: >><snip> >> >>>To the other poster- You *will* see a difference in benchmarks. If >>>the memory were running at 667, the bandwidth offered would be >>>10.7GB/s, or 25% more than that achieved with 533MHz. And the >>>question wasn't about a dent in performance. Those were benchmark >>>numbers. You don't argue with numbers. >> >><snip> >> >>After years of doing this and comparing the 'benchmarks' with reality - >>no - you won't *see* the difference in anything but that test - more than >>likely - especially in the case you gave (the only thing you changed was >>memory from 533 to 667MHz - your applications are unlikely to load any >>faster or refresh to the screen any faster because it is very doubtful >>that in the computer - that was your bottleneck of performance in the >>first place. ;-) ) >> >>You *do* argue with numbers - because they can be played with in so many >>ways to mean so many things - that the true value of them ends up being in >>the eyes of the presenter - not the eyes of the beholder (if they don't >>bother to argue.) *grin* >> >>-- >>Shenan Stanley >> MS-MVP >>-- >>How To Ask Questions The Smart Way >>http://www.catb.org/~esr/faqs/smart-questions.html >> > > > >
Recommended Posts