Guest Jean Paul Mertens Posted August 17, 2007 Posted August 17, 2007 Hello to all, I have a problem with a BDC (windows 2000 server) who does not see that the PDC (SBS 2000) is back on-line. I have got my PDC crashed,and for some reason the NT-Mirror had stopped some time ago. I have taken the PDC out of the network, and the BDC took over the security with no problem. I have put my (early stopped) mirror disk as master and restored alle backups so that the PDC is ok. I have put the PDC back in the network and had to disconnect (temporary set them to workgroup) all workstations and servers from the domain and then reconnect them to the domain. So far so good until I tried to do the same with my BDC but he keeps saying that there is no PDC so he can not disconnect and he is not trusted by the domain any more. I cant stop the AD becourse the server is BDC etc.. I'm turning in a round so my BDC in no more reachable by the domain and vise versa. Is there a tool (or a way) to force the BDC server to stop from thinking he has to stay a domain on his own so that I can downgrade the BDC to a simple server, take is 'out of the domain' and reconnect it to the 'new domain' Many tanks in advance Jean Paul
Guest Wallyb132 Posted August 17, 2007 Posted August 17, 2007 RE: PDC - BDC Conflicts you need to remove AD from the BDC using DCPromo, remove it completely from the domain, turning it in to a stand alone server, rejoin it to the domain. run adprep on your SBS, then run DCPromo on your BDC again to install AD and make it a domain controller, once its rejoined as a DC make it a global catalog again. "Jean Paul Mertens" wrote: > Hello to all, > > I have a problem with a BDC (windows 2000 server) who does not see that the > PDC (SBS 2000) is back on-line. I have got my PDC crashed,and for some > reason the NT-Mirror had stopped some time ago. I have taken the PDC out of > the network, and the BDC took over the security with no problem. I have put > my (early stopped) mirror disk as master and restored alle backups so that > the PDC is ok. I have put the PDC back in the network and had to disconnect > (temporary set them to workgroup) all workstations and servers from the > domain and then reconnect them to the domain. So far so good until I tried > to do the same with my BDC but he keeps saying that there is no PDC so he > can not disconnect and he is not trusted by the domain any more. I cant stop > the AD becourse the server is BDC etc.. I'm turning in a round so my BDC in > no more reachable by the domain and vise versa. > > Is there a tool (or a way) to force the BDC server to stop from thinking he > has to stay a domain on his own so that I can downgrade the BDC to a simple > server, take is 'out of the domain' and reconnect it to the 'new domain' > > Many tanks in advance > > Jean Paul > > > >
Guest Phillip Windell Posted August 17, 2007 Posted August 17, 2007 Re: PDC - BDC Conflicts "Jean Paul Mertens" <ON7AMI@newsgroups.nospam> wrote in message news:ewBu1cN4HHA.1204@TK2MSFTNGP03.phx.gbl... > Hello to all, > > I have a problem with a BDC (windows 2000 server) who does not see that > the PDC (SBS 2000) is back on-line. 1. There is no such thing as a PDC and BDC in Windows 2000 or newer. There is a PDC "role" but it is not the same thing. 2. SBS cannot join an existing Domain, so having a second DC in an SBS controlled system is almost [but not quite] totally worthless. a. Rebuilding SBS and giving it the same Domain name as before only creates two *different* domains that just happen to have the same name. b. The other DC can not see the SBS as being back online on the original Domain because the SBS is not back online in the orignal Domain. It is a completely new SBS on a completely new Domain that just happens to use the same name. The proper way to have fault tolerance and recoverability with SBS is by using System-State Backups for the software side and RAID for the hardware side. The RAID itself needs to be done in Hardware and not in Windows. IMO, disaster recovery with SBS is itself a disaster and is why I would never want to run SBS. There have been third-party non-Microsoft solutions "invented" to deal with this. You may have to ask in a SBS Group to find details on that. I don''t have any links or information for that myself. -- Phillip Windell http://www.wandtv.com The views expressed, are my own and not those of my employer, or Microsoft, or anyone else associated with me, including my cats. -----------------------------------------------------
Guest Steve Posted August 17, 2007 Posted August 17, 2007 Re: PDC - BDC Conflicts Please explain why you say SBS can't join an existing domain? There is a KB that gives the steps to do so: http://support.microsoft.com/kb/884453 "Phillip Windell" <philwindell@hotmail.com> wrote in message news:uQI1JhO4HHA.1184@TK2MSFTNGP04.phx.gbl... > "Jean Paul Mertens" <ON7AMI@newsgroups.nospam> wrote in message > news:ewBu1cN4HHA.1204@TK2MSFTNGP03.phx.gbl... >> Hello to all, >> >> I have a problem with a BDC (windows 2000 server) who does not see that >> the PDC (SBS 2000) is back on-line. > > 1. There is no such thing as a PDC and BDC in Windows 2000 or newer. > There is a PDC "role" but it is not the same thing. > > 2. SBS cannot join an existing Domain, so having a second DC in an SBS > controlled system is almost [but not quite] totally worthless. > a. Rebuilding SBS and giving it the same Domain name as before only > creates two *different* domains that just happen to have the same name. > b. The other DC can not see the SBS as being back online on the > original Domain because the SBS is not back online in the orignal Domain. > It is a completely new SBS on a completely new Domain that just happens to > use the same name. > > The proper way to have fault tolerance and recoverability with SBS is by > using System-State Backups for the software side and RAID for the hardware > side. The RAID itself needs to be done in Hardware and not in Windows. > IMO, disaster recovery with SBS is itself a disaster and is why I would > never want to run SBS. > > There have been third-party non-Microsoft solutions "invented" to deal > with this. You may have to ask in a SBS Group to find details on that. I > don''t have any links or information for that myself. > > -- > Phillip Windell > http://www.wandtv.com > > The views expressed, are my own and not those of my employer, or > Microsoft, or anyone else associated with me, including my cats. > ----------------------------------------------------- > >
Guest Cris Hanna [SBS-MVP] Posted August 17, 2007 Posted August 17, 2007 Re: PDC - BDC Conflicts Phillip Actually with SBS 2003 (and I see no reason why it wouldn't work with 2000, but the document was written for SBS 2003) you can install to an existing Active Directory network -- Cris Hanna [sBS-MVP] ------------------------------------------------- Microsoft MVPs Independent Experts (MVPs do not work for MS) Real World Answers --------------------------------------------------------- Please do not contact me directly regarding issues "Phillip Windell" <philwindell@hotmail.com> wrote in message news:uQI1JhO4HHA.1184@TK2MSFTNGP04.phx.gbl... "Jean Paul Mertens" <ON7AMI@newsgroups.nospam> wrote in message news:ewBu1cN4HHA.1204@TK2MSFTNGP03.phx.gbl... > Hello to all, > > I have a problem with a BDC (windows 2000 server) who does not see that > the PDC (SBS 2000) is back on-line. 1. There is no such thing as a PDC and BDC in Windows 2000 or newer. There is a PDC "role" but it is not the same thing. 2. SBS cannot join an existing Domain, so having a second DC in an SBS controlled system is almost [but not quite] totally worthless. a. Rebuilding SBS and giving it the same Domain name as before only creates two *different* domains that just happen to have the same name. b. The other DC can not see the SBS as being back online on the original Domain because the SBS is not back online in the orignal Domain. It is a completely new SBS on a completely new Domain that just happens to use the same name. The proper way to have fault tolerance and recoverability with SBS is by using System-State Backups for the software side and RAID for the hardware side. The RAID itself needs to be done in Hardware and not in Windows. IMO, disaster recovery with SBS is itself a disaster and is why I would never want to run SBS. There have been third-party non-Microsoft solutions "invented" to deal with this. You may have to ask in a SBS Group to find details on that. I don''t have any links or information for that myself. -- Phillip Windell http://www.wandtv.com The views expressed, are my own and not those of my employer, or Microsoft, or anyone else associated with me, including my cats. -----------------------------------------------------
Guest Phillip Windell Posted August 17, 2007 Posted August 17, 2007 Re: PDC - BDC Conflicts I've always been told by everyone that it wouldn't. I don't run it myself. I didn't know that article existed,...I was under the impression that SBS did not even posses "dcpromo.exe" What about SBS2000? -- Phillip Windell http://www.wandtv.com The views expressed, are my own and not those of my employer, or Microsoft, or anyone else associated with me, including my cats. ----------------------------------------------------- "Steve" <newsgroup@public.lan> wrote in message news:%23DeXz4O4HHA.3916@TK2MSFTNGP02.phx.gbl... > Please explain why you say SBS can't join an existing domain? There is a > KB that gives the steps to do so: > > http://support.microsoft.com/kb/884453 > > "Phillip Windell" <philwindell@hotmail.com> wrote in message > news:uQI1JhO4HHA.1184@TK2MSFTNGP04.phx.gbl... >> "Jean Paul Mertens" <ON7AMI@newsgroups.nospam> wrote in message >> news:ewBu1cN4HHA.1204@TK2MSFTNGP03.phx.gbl... >>> Hello to all, >>> >>> I have a problem with a BDC (windows 2000 server) who does not see that >>> the PDC (SBS 2000) is back on-line. >> >> 1. There is no such thing as a PDC and BDC in Windows 2000 or newer. >> There is a PDC "role" but it is not the same thing. >> >> 2. SBS cannot join an existing Domain, so having a second DC in an SBS >> controlled system is almost [but not quite] totally worthless. >> a. Rebuilding SBS and giving it the same Domain name as before only >> creates two *different* domains that just happen to have the same name. >> b. The other DC can not see the SBS as being back online on the >> original Domain because the SBS is not back online in the orignal Domain. >> It is a completely new SBS on a completely new Domain that just happens >> to use the same name. >> >> The proper way to have fault tolerance and recoverability with SBS is by >> using System-State Backups for the software side and RAID for the >> hardware side. The RAID itself needs to be done in Hardware and not in >> Windows. IMO, disaster recovery with SBS is itself a disaster and is why >> I would never want to run SBS. >> >> There have been third-party non-Microsoft solutions "invented" to deal >> with this. You may have to ask in a SBS Group to find details on that. I >> don''t have any links or information for that myself. >> >> -- >> Phillip Windell >> http://www.wandtv.com >> >> The views expressed, are my own and not those of my employer, or >> Microsoft, or anyone else associated with me, including my cats. >> ----------------------------------------------------- >> >> > >
Guest Phillip Windell Posted August 17, 2007 Posted August 17, 2007 Re: PDC - BDC Conflicts Sorry, Steve posted an article on this. I never knew that was possible. I'd always been told by others that it could not do so. I don't run it myself. Someone came up with some kind of complex third-party thing to deal with this stuff, and now I don't undserstand why all that was needed if SBS can do this so easily and naturally on its own. I'm not disapointed of course, if I ever have to deal with it then it will be easier to deal with than I thought. I guess this a good example why why people should not cross-post their question all over the place and stick to the correct groups. Then they'd get the correct answer from the right people who know best in the first place. -- Phillip Windell http://www.wandtv.com The views expressed, are my own and not those of my employer, or Microsoft, or anyone else associated with me, including my cats. "Cris Hanna [sBS-MVP]" <crisnospamhanna@computingnospampossibilities.net> wrote in message news:%23GmFA6O4HHA.1184@TK2MSFTNGP04.phx.gbl... Phillip Actually with SBS 2003 (and I see no reason why it wouldn't work with 2000, but the document was written for SBS 2003) you can install to an existing Active Directory network -- Cris Hanna [sBS-MVP] ------------------------------------------------- Microsoft MVPs Independent Experts (MVPs do not work for MS) Real World Answers --------------------------------------------------------- Please do not contact me directly regarding issues "Phillip Windell" <philwindell@hotmail.com> wrote in message news:uQI1JhO4HHA.1184@TK2MSFTNGP04.phx.gbl... "Jean Paul Mertens" <ON7AMI@newsgroups.nospam> wrote in message news:ewBu1cN4HHA.1204@TK2MSFTNGP03.phx.gbl... > Hello to all, > > I have a problem with a BDC (windows 2000 server) who does not see that > the PDC (SBS 2000) is back on-line. 1. There is no such thing as a PDC and BDC in Windows 2000 or newer. There is a PDC "role" but it is not the same thing. 2. SBS cannot join an existing Domain, so having a second DC in an SBS controlled system is almost [but not quite] totally worthless. a. Rebuilding SBS and giving it the same Domain name as before only creates two *different* domains that just happen to have the same name. b. The other DC can not see the SBS as being back online on the original Domain because the SBS is not back online in the orignal Domain. It is a completely new SBS on a completely new Domain that just happens to use the same name. The proper way to have fault tolerance and recoverability with SBS is by using System-State Backups for the software side and RAID for the hardware side. The RAID itself needs to be done in Hardware and not in Windows. IMO, disaster recovery with SBS is itself a disaster and is why I would never want to run SBS. There have been third-party non-Microsoft solutions "invented" to deal with this. You may have to ask in a SBS Group to find details on that. I don''t have any links or information for that myself. -- Phillip Windell http://www.wandtv.com The views expressed, are my own and not those of my employer, or Microsoft, or anyone else associated with me, including my cats. -----------------------------------------------------
Guest Steve Posted August 17, 2007 Posted August 17, 2007 Re: PDC - BDC Conflicts As Cris says I think that SBS 2000 could also join a domain in the same way but I haven't even thought about that version for about 4 years. Steve "Phillip Windell" <philwindell@hotmail.com> wrote in message news:uJ5WhUP4HHA.3400@TK2MSFTNGP03.phx.gbl... > I've always been told by everyone that it wouldn't. I don't run it myself. > I didn't know that article existed,...I was under the impression that SBS > did not even posses "dcpromo.exe" > > What about SBS2000? > > -- > Phillip Windell > http://www.wandtv.com > > The views expressed, are my own and not those of my employer, or > Microsoft, or anyone else associated with me, including my cats. > ----------------------------------------------------- > > > "Steve" <newsgroup@public.lan> wrote in message > news:%23DeXz4O4HHA.3916@TK2MSFTNGP02.phx.gbl... >> Please explain why you say SBS can't join an existing domain? There is a >> KB that gives the steps to do so: >> >> http://support.microsoft.com/kb/884453 >> >> "Phillip Windell" <philwindell@hotmail.com> wrote in message >> news:uQI1JhO4HHA.1184@TK2MSFTNGP04.phx.gbl... >>> "Jean Paul Mertens" <ON7AMI@newsgroups.nospam> wrote in message >>> news:ewBu1cN4HHA.1204@TK2MSFTNGP03.phx.gbl... >>>> Hello to all, >>>> >>>> I have a problem with a BDC (windows 2000 server) who does not see that >>>> the PDC (SBS 2000) is back on-line. >>> >>> 1. There is no such thing as a PDC and BDC in Windows 2000 or newer. >>> There is a PDC "role" but it is not the same thing. >>> >>> 2. SBS cannot join an existing Domain, so having a second DC in an SBS >>> controlled system is almost [but not quite] totally worthless. >>> a. Rebuilding SBS and giving it the same Domain name as before only >>> creates two *different* domains that just happen to have the same name. >>> b. The other DC can not see the SBS as being back online on the >>> original Domain because the SBS is not back online in the orignal >>> Domain. It is a completely new SBS on a completely new Domain that just >>> happens to use the same name. >>> >>> The proper way to have fault tolerance and recoverability with SBS is by >>> using System-State Backups for the software side and RAID for the >>> hardware side. The RAID itself needs to be done in Hardware and not in >>> Windows. IMO, disaster recovery with SBS is itself a disaster and is why >>> I would never want to run SBS. >>> >>> There have been third-party non-Microsoft solutions "invented" to deal >>> with this. You may have to ask in a SBS Group to find details on that. >>> I don''t have any links or information for that myself. >>> >>> -- >>> Phillip Windell >>> http://www.wandtv.com >>> >>> The views expressed, are my own and not those of my employer, or >>> Microsoft, or anyone else associated with me, including my cats. >>> ----------------------------------------------------- >>> >>> >> >> > >
Guest SuperGumby [SBS MVP] Posted August 18, 2007 Posted August 18, 2007 Re: PDC - BDC Conflicts looking at the list of crosspost groups, it's reasonable, there is a decent expectation of an answer from each and the list is not overly extensive. Something's been missed in the discussion however. The 'throw the baby away' method of DC recovery is wasteful whether the DC be an SBS or not. Jean Paul needs to reassess/redesign his Disaster Recovery process. The original DC should have been 'recovered' rather than 'replaced'. and all this gaff about 'there is no PDC/BDC in 2000+ AD's' just bores me, the FSMO role holders (though possibly distributed) are distinctly more 'primary' than 'other' DC's, correcting someone referring to 'my PDC' is just muddying the water, it ain't factual but it's a reasonable way of expressing the idea. I have _very_ little to do with LARGE AD's but those several I have encountered (tens to maybe hundreds of DC's) all actually have one server holding both forest and 'first' domain level FSMO roles, if that ain't a PDC I don't know what it is. (I am not responsible for the design of these AD's, so don't bother correcting me :-) "Phillip Windell" <philwindell@hotmail.com> wrote in message news:ObiHFYP4HHA.5212@TK2MSFTNGP04.phx.gbl... > Sorry, > Steve posted an article on this. I never knew that was possible. I'd > always been told by others that it could not do so. I don't run it > myself. Someone came up with some kind of complex third-party thing to > deal with this stuff, and now I don't undserstand why all that was needed > if SBS can do this so easily and naturally on its own. I'm not > disapointed of course, if I ever have to deal with it then it will be > easier to deal with than I thought. > > I guess this a good example why why people should not cross-post their > question all over the place and stick to the correct groups. Then they'd > get the correct answer from the right people who know best in the first > place. > > > -- > Phillip Windell > http://www.wandtv.com > > The views expressed, are my own and not those of my employer, or > Microsoft, or anyone else associated with me, including my cats. > > "Cris Hanna [sBS-MVP]" <crisnospamhanna@computingnospampossibilities.net> > wrote in message news:%23GmFA6O4HHA.1184@TK2MSFTNGP04.phx.gbl... > Phillip > Actually with SBS 2003 (and I see no reason why it wouldn't work with > 2000, but the document was written for SBS 2003) you can install to an > existing Active Directory network > > -- > Cris Hanna [sBS-MVP] > ------------------------------------------------- > Microsoft MVPs > Independent Experts (MVPs do not work for MS) > Real World Answers > --------------------------------------------------------- > Please do not contact me directly regarding issues > > "Phillip Windell" <philwindell@hotmail.com> wrote in message > news:uQI1JhO4HHA.1184@TK2MSFTNGP04.phx.gbl... > "Jean Paul Mertens" <ON7AMI@newsgroups.nospam> wrote in message > news:ewBu1cN4HHA.1204@TK2MSFTNGP03.phx.gbl... >> Hello to all, >> >> I have a problem with a BDC (windows 2000 server) who does not see that >> the PDC (SBS 2000) is back on-line. > > 1. There is no such thing as a PDC and BDC in Windows 2000 or newer. > There > is a PDC "role" but it is not the same thing. > > 2. SBS cannot join an existing Domain, so having a second DC in an SBS > controlled system is almost [but not quite] totally worthless. > a. Rebuilding SBS and giving it the same Domain name as before only > creates two *different* domains that just happen to have the same name. > b. The other DC can not see the SBS as being back online on the > original > Domain because the SBS is not back online in the orignal Domain. It is a > completely new SBS on a completely new Domain that just happens to use the > same name. > > The proper way to have fault tolerance and recoverability with SBS is by > using System-State Backups for the software side and RAID for the hardware > side. The RAID itself needs to be done in Hardware and not in Windows. > IMO, > disaster recovery with SBS is itself a disaster and is why I would never > want to run SBS. > > There have been third-party non-Microsoft solutions "invented" to deal > with > this. You may have to ask in a SBS Group to find details on that. I > don''t > have any links or information for that myself. > > -- > Phillip Windell > http://www.wandtv.com > > The views expressed, are my own and not those of my employer, or > Microsoft, > or anyone else associated with me, including my cats. > ----------------------------------------------------- > >
Guest Jean Paul Mertens Posted August 18, 2007 Posted August 18, 2007 Re: PDC - BDC Conflicts Wally, That is the problem, if I run DCPromo I got the answer that a domain controller could not be contacted for the domain so he would not continue. The message window says that I have to take out the server out of the domain by making him member of a workgroup and then rejoin the domain. Bus as long as AD is running on the machine I can not leave the domain (In the system properties I can not change the identification of the computer becourse he aims to be a domaincontroller... and so we are back to start. Any further ID's Greets Jean Paul "Wallyb132" <Wallyb132@discussions.microsoft.com> schreef in bericht news:89F6566F-4C04-4409-AECC-E7C819DE1D53@microsoft.com... > you need to remove AD from the BDC using DCPromo, remove it completely > from > the domain, turning it in to a stand alone server, rejoin it to the > domain. > run adprep on your SBS, then run DCPromo on your BDC again to install AD > and > make it a domain controller, once its rejoined as a DC make it a global > catalog again. > > "Jean Paul Mertens" wrote: > >> Hello to all, >> >> I have a problem with a BDC (windows 2000 server) who does not see that >> the >> PDC (SBS 2000) is back on-line. I have got my PDC crashed,and for some >> reason the NT-Mirror had stopped some time ago. I have taken the PDC out >> of >> the network, and the BDC took over the security with no problem. I have >> put >> my (early stopped) mirror disk as master and restored alle backups so >> that >> the PDC is ok. I have put the PDC back in the network and had to >> disconnect >> (temporary set them to workgroup) all workstations and servers from the >> domain and then reconnect them to the domain. So far so good until I >> tried >> to do the same with my BDC but he keeps saying that there is no PDC so he >> can not disconnect and he is not trusted by the domain any more. I cant >> stop >> the AD becourse the server is BDC etc.. I'm turning in a round so my BDC >> in >> no more reachable by the domain and vise versa. >> >> Is there a tool (or a way) to force the BDC server to stop from thinking >> he >> has to stay a domain on his own so that I can downgrade the BDC to a >> simple >> server, take is 'out of the domain' and reconnect it to the 'new domain' >> >> Many tanks in advance >> >> Jean Paul >> >> >> >>
Guest Jean Paul Mertens Posted August 20, 2007 Posted August 20, 2007 Re: PDC - BDC Conflicts Hello all, I was able to remove on the BDC the name of the PDC using ntdsutil, whereafter it was posible to take the BDC out of the domain using DCPromo saying that this was the last domain controller and then he did it. Overnoon I will restart the servers and hopefully it will all work as before. To bee continued :-) ... Jean Paul
Guest SuperGumby [SBS MVP] Posted August 20, 2007 Posted August 20, 2007 Re: PDC - BDC Conflicts it won't. "Jean Paul Mertens" <ON7AMI@newsgroups.nospam> wrote in message news:%23e$BZRw4HHA.1204@TK2MSFTNGP03.phx.gbl... > Hello all, > > I was able to remove on the BDC the name of the PDC using ntdsutil, > whereafter it was posible to take the BDC out of the domain using DCPromo > saying that this was the last domain controller and then he did it. > Overnoon I will restart the servers and hopefully it will all work as > before. > > To bee continued :-) ... > > Jean Paul >
Guest Jean Paul Mertens Posted August 20, 2007 Posted August 20, 2007 Re: PDC - BDC Conflicts I could downgrade the BDC to a standalone server in a workgroup. when I try toe meet the domain again, I got an error saying that the user already exists in the domain. When I try to remove the name of the BDC in the current domain, I get the message that the DSA-object could not be removed Is there a way to do so Greets Jean Paul "SuperGumby [sBS MVP]" <not@your.nellie> schreef in bericht news:uXuISqw4HHA.748@TK2MSFTNGP04.phx.gbl... > it won't. > > "Jean Paul Mertens" <ON7AMI@newsgroups.nospam> wrote in message > news:%23e$BZRw4HHA.1204@TK2MSFTNGP03.phx.gbl... >> Hello all, >> >> I was able to remove on the BDC the name of the PDC using ntdsutil, >> whereafter it was posible to take the BDC out of the domain using DCPromo >> saying that this was the last domain controller and then he did it. >> Overnoon I will restart the servers and hopefully it will all work as >> before. >> >> To bee continued :-) ... >> >> Jean Paul >> > >
Guest Phillip Windell Posted August 20, 2007 Posted August 20, 2007 Re: PDC - BDC Conflicts "SuperGumby [sBS MVP]" <not@your.nellie> wrote in message news:eLHU60S4HHA.2108@TK2MSFTNGP02.phx.gbl... > looking at the list of crosspost groups, it's reasonable, there is a > decent expectation of an answer from each and the list is not overly > extensive. Ok, but if it is reasonable then it is borderline reasonable. > Something's been missed in the discussion however. The 'throw the baby > away' method of DC recovery is wasteful whether the DC be an SBS or not. > Jean Paul needs to reassess/redesign his Disaster Recovery process. The > original DC should have been 'recovered' rather than 'replaced'. Agreed, most definately I also like the comment made in another post that he needs to stop "doing things" and work through the problem methodically. > and all this gaff about 'there is no PDC/BDC in 2000+ AD's' just bores me, > the FSMO role holders (though possibly distributed) are distinctly more It doesn't bore me,...but having people use the PDB/BDC terms is like "fingernails on a chalkboard" to me. I apparently hasn't been pointed out enough if people are still using the terms. It's been over 7 years since Windows 2000 came out,..it's time people figure it out. If poeple want to distingush the PDC Role or the Global Catalog holder because it is relevant to the context, that is fine. -- Phillip Windell http://www.wandtv.com The views expressed, are my own and not those of my employer, or Microsoft, or anyone else associated with me, including my cats. -----------------------------------------------------
Guest Jean Paul Mertens Posted August 21, 2007 Posted August 21, 2007 Re: PDC - BDC Conflicts it did' it After 35 years of experience in Micro computing and Software I know one thing, say never never. The whole thing is nothing more than shuffling with bits and bytes and every bit in every machine is accessible. Never forget that those machines are made to work for us and not visa versa, and no matter what it is, windows, unix, cp/m or whatever, it is always man-made, no magic, and if you really want it to do something it will do it. What my disaster recovery method concerns, It worked several times before without any problem on this and other machines. I'm still convinced that a raid mirror is the best and the quickest way to be in business again. The only problem I had now was that for an unknown reason the mirroring stopped in last April and I never got an error of it. So instead off reinstalling the whole thing I have taken the mirror disk and putted my daily backup on it, and in less than two hours 85% of the network was back up, the only problem was this one server 'with the BDC role' who was not playing the game and my first question was just if someone had a tool to force the server to a stand-alone role, but apparently no one had such a thing. I did not ask for a discussion how good or bad SBS is nor if PDC and BDC are the correct terms of what everybody know what they are. My problem was a server problem with influence on the security, on network and on SBS so I thought to find in those groups what I was looking for. It is the first time, and I use BBS's long before internet exists, that I've got such reactions.. No matter, for who is ever interested in how I fixed my problem I will put it one of the days to come on my website http://www.on7ami.be Greets to all, From a growing old IT'er Jean Paul "SuperGumby [sBS MVP]" <not@your.nellie> schreef in bericht news:uXuISqw4HHA.748@TK2MSFTNGP04.phx.gbl... > it won't. > > "Jean Paul Mertens" <ON7AMI@newsgroups.nospam> wrote in message > news:%23e$BZRw4HHA.1204@TK2MSFTNGP03.phx.gbl... >> Hello all, >> >> I was able to remove on the BDC the name of the PDC using ntdsutil, >> whereafter it was posible to take the BDC out of the domain using DCPromo >> saying that this was the last domain controller and then he did it. >> Overnoon I will restart the servers and hopefully it will all work as >> before. >> >> To bee continued :-) ... >> >> Jean Paul >> > >
Guest SuperGumby [SBS MVP] Posted August 21, 2007 Posted August 21, 2007 Re: PDC - BDC Conflicts Jean Paul, you ripped the heart out of AD and had to remove and reinvite every workstation to the AD. For a period of time the state of your DC's and communication between them was indeterminate and you were not particularly forthcoming with error status about them (you told us a lot about what you had done, but not much about what was happening, ie. details, error messages). I'm glad to hear it's all sorted. I probably would have gone to the (too long offline) mirror and restored a recent 'system state', while in a disconnected state, possibly have had issues but _probably_ not as many as you experienced. However, I can theorise about the process till hades turns cold, fact is, you have a functioning system. I'm sorry I was of no benefit in the process but I still suggest you need to look at your DR procedure, or maybe the approach to DR, make it easier should it happen again. "Jean Paul Mertens" <ON7AMI@newsgroups.nospam> wrote in message news:%23j8IrY%234HHA.4712@TK2MSFTNGP04.phx.gbl... > it did' it > > > > After 35 years of experience in Micro computing and Software I know one > thing, say never never. > > > > The whole thing is nothing more than shuffling with bits and bytes and > every bit in every machine is accessible. Never forget that those machines > are made to work for us and not visa versa, and no matter what it is, > windows, unix, cp/m or whatever, it is always man-made, no magic, and if > you really want it to do something it will do it. > > > > What my disaster recovery method concerns, It worked several times before > without any problem on this and other machines. I'm still convinced that a > raid mirror is the best and the quickest way to be in business again. The > only problem I had now was that for an unknown reason the mirroring > stopped in last April and I never got an error of it. So instead off > reinstalling the whole thing I have taken the mirror disk and putted my > daily backup on it, and in less than two hours 85% of the network was back > up, the only problem was this one server 'with the BDC role' who was not > playing the game and my first question was just if someone had a tool to > force the server to a stand-alone role, but apparently no one had such a > thing. > > > > I did not ask for a discussion how good or bad SBS is nor if PDC and BDC > are the correct terms of what everybody know what they are. My problem was > a server problem with influence on the security, on network and on SBS so > I thought to find in those groups what I was looking for. It is the first > time, and I use BBS's long before internet exists, that I've got such > reactions.. > > > > No matter, for who is ever interested in how I fixed my problem I will put > it one of the days to come on my website http://www.on7ami.be > > > > Greets to all, > > > > From a growing old IT'er > > > > Jean Paul > > > > "SuperGumby [sBS MVP]" <not@your.nellie> schreef in bericht > news:uXuISqw4HHA.748@TK2MSFTNGP04.phx.gbl... >> it won't. >> >> "Jean Paul Mertens" <ON7AMI@newsgroups.nospam> wrote in message >> news:%23e$BZRw4HHA.1204@TK2MSFTNGP03.phx.gbl... >>> Hello all, >>> >>> I was able to remove on the BDC the name of the PDC using ntdsutil, >>> whereafter it was posible to take the BDC out of the domain using >>> DCPromo saying that this was the last domain controller and then he did >>> it. Overnoon I will restart the servers and hopefully it will all work >>> as before. >>> >>> To bee continued :-) ... >>> >>> Jean Paul >>> >> >> > >
Recommended Posts