Guest s_m_b Posted September 24, 2007 Posted September 24, 2007 I'm making my way through http://support.microsoft.com/kb/824643 due to issues with .NET 1.1 installation, and have come to the point of doing a clean boot (Manually remove and then reinstall the .NET Framework 1.1, point 6) Here's the problem: 'When you use Msconfig.exe in diagnostic mode, reenable the Windows Installer Service on the Services tab.' But, when I do this, it tells me that either 'Plug and Play' or another service is unavailable. Anyone know which basic services need to run to get this going?
Guest MowGreen [MVP] Posted September 24, 2007 Posted September 24, 2007 Re: starting Windows Installer Serv under msconfig? > Disable all antivirus programs and all firewall programs that you have installed on your > computer. To do this, use the System Configuration Utility (Msconfig.exe) to perform a > clean start of your computer, and then disable any services that you do not need. The only Services that you need to disable are 'antivirus programs and all firewall programs'. Leave the MS Services alone. Disabling services with MSConfig to work around setup failures http://blogs.msdn.com/astebner/archive/2006/11/25/disabling-services-with-msconfig-to-work-around-setup-failures.aspx Unified .NET Framework Troubleshooting Guide http://blogs.msdn.com/astebner/articles/454956.aspx MowGreen [MVP 2003-2007] =============== *-343-* FDNY Never Forgotten =============== s_m_b wrote: > I'm making my way through > http://support.microsoft.com/kb/824643 > due to issues with .NET 1.1 installation, and have come to the point of > doing a clean boot (Manually remove and then reinstall the .NET Framework > 1.1, point 6) > Here's the problem: > 'When you use Msconfig.exe in diagnostic mode, reenable the Windows > Installer Service on the Services tab.' > But, when I do this, it tells me that either 'Plug and Play' or another > service is unavailable. > > Anyone know which basic services need to run to get this going?
Guest s_m_b Posted September 25, 2007 Posted September 25, 2007 Re: starting Windows Installer Serv under msconfig? "MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in news:#sGzHiu$HHA.5360@TK2MSFTNGP03.phx.gbl: Thanks. That was not made clear in the kb item. However, no matter what I try I still return to the error message I've been getting for some time now. "Error creating process <C:\DOCUME~1\resitsb.CYC.001\Local Settings\Temp \XIP000.TMP\cleanup.exe>. Reason: C:\WINDOWS\system32\advpack.dll" (or some variation on that with the exe file or exact temp path. The advpack.dll is there, its version is 7.0.6000.16512 (vista_gdr.070625-1522) >> Disable all antivirus programs and all firewall programs that you >> have installed on your computer. To do this, use the System >> Configuration Utility (Msconfig.exe) to perform a clean start of your >> computer, and then disable any services that you do not need. > > The only Services that you need to disable are 'antivirus programs and > all firewall programs'. Leave the MS Services alone. > > Disabling services with MSConfig to work around setup failures > http://blogs.msdn.com/astebner/archive/2006/11/25/disabling-services-wi > th-msconfig-to-work-around-setup-failures.aspx > > Unified .NET Framework Troubleshooting Guide > http://blogs.msdn.com/astebner/articles/454956.aspx > > MowGreen [MVP 2003-2007] > =============== > *-343-* FDNY > Never Forgotten > =============== > > > s_m_b wrote: > >> I'm making my way through >> http://support.microsoft.com/kb/824643 >> due to issues with .NET 1.1 installation, and have come to the point >> of doing a clean boot (Manually remove and then reinstall the .NET >> Framework 1.1, point 6) >> Here's the problem: >> 'When you use Msconfig.exe in diagnostic mode, reenable the Windows >> Installer Service on the Services tab.' >> But, when I do this, it tells me that either 'Plug and Play' or >> another service is unavailable. >> >> Anyone know which basic services need to run to get this going? >
Guest MowGreen [MVP] Posted September 25, 2007 Posted September 25, 2007 Re: starting Windows Installer Serv under msconfig? > The advpack.dll is there, its version is 7.0.6000.16512 > (vista_gdr.070625-1522) So this is a Vista issue, correct ? Being that this is an XP newsgroup, perhaps you should post this issue to a Vista NG. If you want to consult "the" source for .NET Framework installation issues please see: Unified .NET Framework Troubleshooting Guide http://blogs.msdn.com/astebner/articles/454956.aspx Contact Aaron from the link on his blog. MowGreen [MVP 2003-2007] =============== *-343-* FDNY Never Forgotten =============== s_m_b wrote: > "MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in > news:#sGzHiu$HHA.5360@TK2MSFTNGP03.phx.gbl: > > Thanks. That was not made clear in the kb item. > > However, no matter what I try I still return to the error message I've > been getting for some time now. > > "Error creating process <C:\DOCUME~1\resitsb.CYC.001\Local Settings\Temp > \XIP000.TMP\cleanup.exe>. Reason: C:\WINDOWS\system32\advpack.dll" > (or some variation on that with the exe file or exact temp path. > > The advpack.dll is there, its version is 7.0.6000.16512 > (vista_gdr.070625-1522) > > > > > >>>Disable all antivirus programs and all firewall programs that you >>>have installed on your computer. To do this, use the System >>>Configuration Utility (Msconfig.exe) to perform a clean start of your >>>computer, and then disable any services that you do not need. >> >>The only Services that you need to disable are 'antivirus programs and >>all firewall programs'. Leave the MS Services alone. >> >>Disabling services with MSConfig to work around setup failures >>http://blogs.msdn.com/astebner/archive/2006/11/25/disabling-services-wi >>th-msconfig-to-work-around-setup-failures.aspx >> >>Unified .NET Framework Troubleshooting Guide >>http://blogs.msdn.com/astebner/articles/454956.aspx >> >>MowGreen [MVP 2003-2007] >>=============== >> *-343-* FDNY >>Never Forgotten >>=============== >> >> >>s_m_b wrote: >> >> >>>I'm making my way through >>>http://support.microsoft.com/kb/824643 >>>due to issues with .NET 1.1 installation, and have come to the point >>>of doing a clean boot (Manually remove and then reinstall the .NET >>>Framework 1.1, point 6) >>>Here's the problem: >>>'When you use Msconfig.exe in diagnostic mode, reenable the Windows >>>Installer Service on the Services tab.' >>>But, when I do this, it tells me that either 'Plug and Play' or >>>another service is unavailable. >>> >>>Anyone know which basic services need to run to get this going? >> >
Guest s_m_b Posted September 27, 2007 Posted September 27, 2007 Re: starting Windows Installer Serv under msconfig? "MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in news:enuz7v7$HHA.1184 @TK2MSFTNGP04.phx.gbl: No - XP. I thought that odd too. Anyway, I'll follow up the .NET link. THanks. >> The advpack.dll is there, its version is 7.0.6000.16512 >> (vista_gdr.070625-1522) > > So this is a Vista issue, correct ? Being that this is an XP newsgroup, > perhaps you should post this issue to a Vista NG. > If you want to consult "the" source for .NET Framework installation > issues please see: > > Unified .NET Framework Troubleshooting Guide > http://blogs.msdn.com/astebner/articles/454956.aspx > > Contact Aaron from the link on his blog. > > MowGreen [MVP 2003-2007] > =============== > *-343-* FDNY > Never Forgotten > =============== > > > > s_m_b wrote: > >> "MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in >> news:#sGzHiu$HHA.5360@TK2MSFTNGP03.phx.gbl: >> >> Thanks. That was not made clear in the kb item. >> >> However, no matter what I try I still return to the error message I've >> been getting for some time now. >> >> "Error creating process <C:\DOCUME~1\resitsb.CYC.001\Local Settings \Temp >> \XIP000.TMP\cleanup.exe>. Reason: C:\WINDOWS\system32\advpack.dll" >> (or some variation on that with the exe file or exact temp path. >> >> The advpack.dll is there, its version is 7.0.6000.16512 >> (vista_gdr.070625-1522) >> >> >> >> >> >>>>Disable all antivirus programs and all firewall programs that you >>>>have installed on your computer. To do this, use the System >>>>Configuration Utility (Msconfig.exe) to perform a clean start of your >>>>computer, and then disable any services that you do not need. >>> >>>The only Services that you need to disable are 'antivirus programs and >>>all firewall programs'. Leave the MS Services alone. >>> >>>Disabling services with MSConfig to work around setup failures >>>http://blogs.msdn.com/astebner/archive/2006/11/25/disabling-services- wi >>>th-msconfig-to-work-around-setup-failures.aspx >>> >>>Unified .NET Framework Troubleshooting Guide >>>http://blogs.msdn.com/astebner/articles/454956.aspx >>> >>>MowGreen [MVP 2003-2007] >>>=============== >>> *-343-* FDNY >>>Never Forgotten >>>=============== >>> >>> >>>s_m_b wrote: >>> >>> >>>>I'm making my way through >>>>http://support.microsoft.com/kb/824643 >>>>due to issues with .NET 1.1 installation, and have come to the point >>>>of doing a clean boot (Manually remove and then reinstall the .NET >>>>Framework 1.1, point 6) >>>>Here's the problem: >>>>'When you use Msconfig.exe in diagnostic mode, reenable the Windows >>>>Installer Service on the Services tab.' >>>>But, when I do this, it tells me that either 'Plug and Play' or >>>>another service is unavailable. >>>> >>>>Anyone know which basic services need to run to get this going? >>> >> >
Guest MowGreen [MVP] Posted September 27, 2007 Posted September 27, 2007 Re: starting Windows Installer Serv under msconfig? advpack.dll should be at V. 6.0.2900.2180 in XP Suggest you check in WINDOWS\system32\dllcache and see if that Version exists there If so, replace the one in system32 with the proper Version MowGreen [MVP 2003-2007] =============== *-343-* FDNY Never Forgotten =============== s_m_b wrote: > "MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in news:enuz7v7$HHA.1184 > @TK2MSFTNGP04.phx.gbl: > > No - XP. I thought that odd too. > Anyway, I'll follow up the .NET link. THanks. > > >>>The advpack.dll is there, its version is 7.0.6000.16512 >>>(vista_gdr.070625-1522) >> >>So this is a Vista issue, correct ? Being that this is an XP newsgroup, >>perhaps you should post this issue to a Vista NG. >>If you want to consult "the" source for .NET Framework installation >>issues please see: >> >>Unified .NET Framework Troubleshooting Guide >>http://blogs.msdn.com/astebner/articles/454956.aspx >> >>Contact Aaron from the link on his blog. >> >>MowGreen [MVP 2003-2007] >>=============== >> *-343-* FDNY >>Never Forgotten >>=============== >> >> >> >>s_m_b wrote: >> >> >>>"MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in >>>news:#sGzHiu$HHA.5360@TK2MSFTNGP03.phx.gbl: >>> >>>Thanks. That was not made clear in the kb item. >>> >>>However, no matter what I try I still return to the error message I've >>>been getting for some time now. >>> >>>"Error creating process <C:\DOCUME~1\resitsb.CYC.001\Local Settings > > \Temp > >>>\XIP000.TMP\cleanup.exe>. Reason: C:\WINDOWS\system32\advpack.dll" >>>(or some variation on that with the exe file or exact temp path. >>> >>>The advpack.dll is there, its version is 7.0.6000.16512 >>>(vista_gdr.070625-1522) >>> >>> >>> >>> >>> >>> >>>>>Disable all antivirus programs and all firewall programs that you >>>>>have installed on your computer. To do this, use the System >>>>>Configuration Utility (Msconfig.exe) to perform a clean start of your >>>>>computer, and then disable any services that you do not need. >>>> >>>>The only Services that you need to disable are 'antivirus programs and >>>>all firewall programs'. Leave the MS Services alone. >>>> >>>>Disabling services with MSConfig to work around setup failures >>>>http://blogs.msdn.com/astebner/archive/2006/11/25/disabling-services- > > wi > >>>>th-msconfig-to-work-around-setup-failures.aspx >>>> >>>>Unified .NET Framework Troubleshooting Guide >>>>http://blogs.msdn.com/astebner/articles/454956.aspx >>>> >>>>MowGreen [MVP 2003-2007] >>>>=============== >>>> *-343-* FDNY >>>>Never Forgotten >>>>=============== >>>> >>>> >>>>s_m_b wrote: >>>> >>>> >>>> >>>>>I'm making my way through >>>>>http://support.microsoft.com/kb/824643 >>>>>due to issues with .NET 1.1 installation, and have come to the point >>>>>of doing a clean boot (Manually remove and then reinstall the .NET >>>>>Framework 1.1, point 6) >>>>>Here's the problem: >>>>>'When you use Msconfig.exe in diagnostic mode, reenable the Windows >>>>>Installer Service on the Services tab.' >>>>>But, when I do this, it tells me that either 'Plug and Play' or >>>>>another service is unavailable. >>>>> >>>>>Anyone know which basic services need to run to get this going? >>>> >
Recommended Posts