Guest curmud Posted September 29, 2007 Posted September 29, 2007 I have a Sony vaio which recently died due to motherboard failure. I replaced it with a new motherboard and processor, plugged in the drive and accessories but XP won't come up either from the HD or the recovery disk. I assume this is because the system is no longer recognized as a vaio and Microsoft thinks I am trying to steal a copy of windows. Of course this is a bought and paid for copy which came with the original machine. Is there any way to make this work?
Guest Andrew E. Posted September 29, 2007 Posted September 29, 2007 RE: Revive XP on new motherboard Microsoft hasnt the slightest thing to do with youre problem(s)..... An old hd with xp on it will not run on a diffrent MB,it was configured to run on the 1st board only.Boot to xp cd,reinstall xp,new copy,delete the partition, create one,then let xp format & install. "curmud" wrote: > I have a Sony vaio which recently died due to motherboard failure. I > replaced it with a new motherboard and processor, plugged in the drive and > accessories but XP won't come up either from the HD or the recovery disk. I > assume this is because the system is no longer recognized as a vaio and > Microsoft thinks I am trying to steal a copy of windows. Of course this is a > bought and paid for copy which came with the original machine. Is there any > way to make this work?
Guest Malke Posted September 29, 2007 Posted September 29, 2007 Re: Revive XP on new motherboard curmud wrote: > I have a Sony vaio which recently died due to motherboard failure. I > replaced it with a new motherboard and processor, plugged in the drive and > accessories but XP won't come up either from the HD or the recovery disk. I > assume this is because the system is no longer recognized as a vaio and > Microsoft thinks I am trying to steal a copy of windows. Of course this is a > bought and paid for copy which came with the original machine. Is there any > way to make this work? This has nothing to do with Microsoft and everything to do with what you purchased - an OEM machine from Sony. The XP installed on the Sony is an OEM version and OEM versions are tied to the hardware on which they are first installed. In addition, many OEM versions are BIOS-locked to look for an OEM motherboard. IOW, if your install disk doesn't find a Sony motherboard it won't install. This is not because Microsoft "thinks" you are trying to steal anything. It is because you did not understand what you bought from Sony. What you should have done was either get the replacement board from Sony (and in that case would have been able to use the reinstallation media) or, if that was no longer possible, purchase a generic OEM or retail version of XP. You will still need to download all the drivers and laptop-specific software for your particular model laptop from Sony. Malke -- Elephant Boy Computers http://www.elephantboycomputers.com "Don't Panic!" MS-MVP Windows - Shell/User
Guest Bruce Chambers Posted September 29, 2007 Posted September 29, 2007 Re: Revive XP on new motherboard curmud wrote: > I have a Sony vaio which recently died due to motherboard failure. I > replaced it with a new motherboard and processor, plugged in the drive and > accessories but XP won't come up either from the HD or the recovery disk. I > assume this is because the system is no longer recognized as a vaio and > Microsoft thinks I am trying to steal a copy of windows. No, it's because Sony bound its Recovery media to a specific motherboard to prevent theft. > Of course this is a > bought and paid for copy which came with the original machine. Is there any > way to make this work? Only if you obtain the replacement motherboard from Sony. Normally, and assuming a retail license (many factory-installed OEM installations are BIOS-locked to a specific chipset and therefore are *not* transferable to a new motherboard - check yours before starting), unless the new motherboard is virtually identical (same chipset, same IDE controllers, same BIOS version, etc.) to the one on which the WinXP installation was originally performed, you'll need to perform a repair (a.k.a. in-place upgrade) installation, at the very least: How to Perform an In-Place Upgrade of Windows XP http://support.microsoft.com/directory/article.asp?ID=KB;EN-US;Q315341 Changing a Motherboard or Moving a Hard Drive with WinXP Installed http://www.michaelstevenstech.com/moving_xp.html The "why" is quite simple, really, and has nothing to do with licensing issues, per se; it's a purely technical matter, at this point. You've pulled the proverbial hardware rug out from under the OS. (If you don't like -- or get -- the rug analogy, think of it as picking up a Cape Cod style home and then setting it down onto a Ranch style foundation. It just isn't going to fit.) WinXP, like Win2K before it, is not nearly as "promiscuous" as Win9x when it comes to accepting any old hardware configuration you throw at it. On installation it "tailors" itself to the specific hardware found. This is one of the reasons that the entire WinNT/2K/XP OS family is so much more stable than the Win9x group. As always when undertaking such a significant change, back up any important data before starting. This will also probably require re-activation, unless you have a Volume Licensed version of WinXP Pro installed. If it's been more than 120 days since you last activated that specific Product Key, you'll most likely be able to activate via the Internet without problem. If it's been less, you might have to make a 5 minute phone call. -- Bruce Chambers Help us help you: http://dts-l.org/goodpost.htm http://www.catb.org/~esr/faqs/smart-questions.html They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety. ~Benjamin Franklin Many people would rather die than think; in fact, most do. ~Bertrand Russell The philosopher has never killed any priests, whereas the priest has killed a great many philosophers. ~ Denis Diderot
Recommended Posts