Microsoft Products Support & Discussions

264,911 topics in this forum

1. 

   How to Enable TLS 1.3 on IIS Web Server with Windows Server 2022 for Enhanced Cloud Service Security?

   October 31 by Guest Himanshi Mahour

   • 0 replies
   • 2 views

   Hello everyone,I’m currently working on improving the security of my web applications hosted on IIS with Windows Server 2022. As we know, using TLS 1.3 can significantly enhance security, especially when dealing with sensitive data in a cloud service environment. I wanted to share my findings and seek any additional advice or tips from the community.First, I’ve verified that my server is up to date with the latest Windows updates. I understand that TLS 1.3 is supported on Windows Server 2022, but enabling it requires a few specific configurations. Here’s the step-by-step process I followed:Reg Continue reading...

   

   Last reply by Guest, October 31
2. 

   AD Password Change- Password does not meet requirements

   October 31 by Guest David Galway

   • 0 replies
   • 2 views

   I am an admin for our domain, which has 13 DC's that replicate constantly. I'm not as familiar with this stuff, but I am unfortunately the person with the most knowledge in this at my company. When users attempt to change their password either due to password expiration or just changing, they are presented with the "Your password does not meet the requirements," regardless of how complex it is. I know it's not user error because I've tried to change their passwords and done incredibly long and complex passwords with the same error. Right now our settings are: -Users are logging onto domain t Continue reading...

   

   Last reply by Guest, October 31
3. 

   windows 2022 unresponsive. we need to get analyzed a full system memory dump.

   October 31 by Guest Gustavo Garcia5

   • 0 replies
   • 2 views

   We have a windows 2022 hosted in Datacenter on-prem in vmware, we collected a full system memory dump. When issue occurs the server is unresponsive.we sent the dump to Citrix Technical support and they recommended to engage Microsoft support team to get the same dump analyzed because they did not find any binary pointing to Citrix as the culprit. What they see is a lot of wait for Terminal service. They mentioned we have to engage Microsoft because they do not have access to private symbols.Citrix provided the full analysis , so we can share it with Microsoft support team at anytime. Continue reading...

   

   Last reply by Guest, October 31
4. 

   How are print servers setup and configured?

   October 31 by Guest MikeWebb6802

   • 0 replies
   • 3 views

   My questions: (a) How are print objects/devices ("printer") added to a print server? (b) How are drivers for each printer stored on the print server, AND associated with one or more printers (when a driver will work for different models)? © What changes are needed when a printer has been upgraded to a newer model but retains the same Host Name? (4) What is the impact, if any, when a printer is replaced with a newer model and is assigned the same host name and the same reserved IP?Background: I'm new to an MSP that provides printers (MFP's) and their lifecycle support and maintenance to a lar Continue reading...

   

   Last reply by Guest, October 31
5. 

   Domain Admins member of Domain Admins

   October 31 by Guest Gregory B. Duenow

   • 0 replies
   • 3 views

   My domain is level Windows Server 2016First DC is:Windows Server 2016 DatacenterSecond DC is:Windows Server 2022 Datacenter Azure EditionDomain Admins is a member of Domain Admins. I remove it, re-add my Domain Admin users, and then the next day it has reverted, wiping out all the users. Continue reading...

   

   Last reply by Guest, October 31
6. 

   Accessing remote MSMQ Queue issue

   October 31 by Guest sushant kora

   • 0 replies
   • 2 views

   I'm working with MSMQ queues and have my client application on one Windows Server VM, trying to access a remote private queue located on another Windows Server VM within the same domain network. When I grant full access to the client system in the remote private queue’s permission settings, I can successfully send and receive messages. However, when I remove these permissions, I expect to receive a "request forbidden" error or some form of exception when attempting to send a message. Instead, no exception is raised, and the call goes through the Send method without error, as shown in the attac Continue reading...

   

   Last reply by Guest, October 31
7. 

   4 DHCP SERVER Failover Configuration | Windows Server 2019

   October 31 by Guest Fer Crz

   • 0 replies
   • 3 views

   Hi,Is it possible to create 4 dhcp servers with failover configuration?example :1. If DHCP (1,2,3) Down DHCP Server 4 is up for backup2. If DHCP (1,4,3) Down DHCP Server 2 is up for backupThank you Continue reading...

   

   Last reply by Guest, October 31
8. 

   RDP licensing problem

   October 31 by Guest johnny -

   • 0 replies
   • 3 views

   Hi,my company has bought RDP license. i didn't know that was open license. when my boss give serial number : XXXXX-XXXXX-XXXXX-XXXXX-XXXXXi thougt that was retail license. but when i activate it worked and the license is for 500 users. but never occupied by connected users. later , i knew that was supposed activate as open license. but i didn't tried yet to activate.what will happen when i activate the right license (open license)?regardsjohnny Continue reading...

   

   Last reply by Guest, October 31
9. 

   About CALL in Windows Server 2022

   October 31 by Guest johnny -

   • 0 replies
   • 3 views

   Hi,I want to know what CAL should i buy when i install windows server 2022 for 5 users. and the server is operate for RDP server too?can more than 1 users to remote to a windows server 2022 without license?regardsjohnny Continue reading...

   

   Last reply by Guest, October 31
10. 

    How do I fix the Kernel Security Check Failure bsod error?

    October 31 by Guest Bacon The Great

    • 0 replies
    • 3 views

    Whenever I play Roblox, sometimes I get a Bsod and it's always the Kernel Security Check Failure bsod.Help me More...

    

    Last reply by Guest, October 31
11. 

    How can I fix the slider not working ? (No sound on the left side of my SteelSeries Arctis Pro +)

    October 31 by Guest Raphael Shakeel

    • 0 replies
    • 4 views

    Hello,I need help, I just bought this new headset (SteelSeries Arctis Pro +) and there is no sound coming out of the left speaker.One of the fixes i found on the internet involves changing the balance in the level's tab.When I thry this the cursor won't move and I can't change it manually.Regards More...

    

    Last reply by Guest, October 31
12. 

    Crashes when I close a game

    October 31 by Guest taber dunn

    • 0 replies
    • 3 views

    My computer has been having a problem for a few months and I've tried everything I've found so far to fix the issue myself from clean booting my PC to reinstalling my drivers and I'm at a stand still so however anyone can help ill take it at this point. The biggest details I've been able to come too is a bug check TDR 116 error in my event manager. Every other major error I've been able to fix but this one and a secure boot update failure that from what I've read is most likely a nothing error but please correct me if I'm wrong.Specs - AMD Ryzen 7 5800X 8-Core ProcessorNVIDIA GeForce RTX 3060M More...

    

    Last reply by Guest, October 31
13. 

    error 7005 (Service Control Manager)

    October 31 by Guest tanweizhi4 tanweizhi4

    • 0 replies
    • 4 views

    Log Name: System Source: Service Control Manager Date: 10/31/2024 10:22:30 AM Event ID: 7005 Task Category: None Level: Error Keywords: Classic User: N/A Computer: DESKTOP-MJI7LNV Description: The LoadUserProfile call failed with the following error: The configuration registry database is corrupt. Event Xml: http://schemas.microsoft.com/win/2004/08/events/event"> 7005 0 2 0 0 0x8080000000000000 660639 System DESKTOP-MJI7LNV LoadUserProfile %%1009 More...

    

    Last reply by Guest, October 31
14. 

    I try to download windows 11 and i get this error

    October 31 by Guest Klajdi Leci

    • 0 replies
    • 3 views

    I have tried everything but nothing seems to work. I am so depressed now becouse my pc is new More...

    

    Last reply by Guest, October 31
15. 

    Random functions on my keys

    October 31 by Guest Aaron James Concepcion

    • 0 replies
    • 5 views

    REDRAGON DRACONIC K530 PRO (keyboard)I'm having this kind of problem where my keyboard is acting weird, there are problems on my number "seven" key, and letters "u", "M", "J" keys. * My number "seven" key becomes the "esc" button (so now i have 2 "esc" buttons),* the letter "u" key becomes the "tab" button (currently just copy and pasting the letter "u" right now to type since i can't use the letter "u"),* my letter "M" key all of the sudden becomes always on caps (opposite if i turn on my capslock),* and lastly my "J" key becomes the "capslock" button (i now have 2 "capslock" button). Hoping More...

    

    Last reply by Guest, October 31