Windows 2000 Server
Windows 2000 server help and discussions.
116 topics in this forum
-
- 11 replies
- 715 views
I have just reinstalled Microsoft Windows 2000 Advanced Server on and HP Kayak XU/300. This is the OS that we had been running fine for years, then a crash and the re-install. The system reinstalled without problem, was able to reinstall some of the applications that were there originally. The problem is, the box can not be seen on the network, if the telnet service is turned on, you can not telnet into the box. Remote desktop does not work, even some VPN software, that work before, now does not. If this was XP, or some other OS that had an included firewall, I would say the firewall was turned on, but that is not the case here. Does anyone have any ideas on…
-
Error after installing July patches on two Advanced Server 2000
by Guest ScottH---- 4 replies
- 614 views
Can you please help with the following? We have just installed the July security patches and are now getting an error. We installed the July Windows security patches on two boxes with: --Windows Advanced Server 2000 sp 4 with IIS 5 --.net version 1.1.4322.573. This following error message is now occurring every few seconds in the Application event viewer. Event ID 1008: The Open Procedure for service "ASP.NET_1.0.3705.6060" in DLL "C:\WINNT\Microsoft.NET\Framework\v1.0.3705\aspnet_isapi.dll" failed. Performance data for this service will not be available. Status code returned is data DWORD 0. What needs to be done to fix either the er…
-
System Crashes with 2G Memory
by Guest Pannadharo- 3 replies
- 564 views
Am looking for information that can lead to fix for W2KAS when installing 2G RAM. Motherboard: Asus A7M266-D Processor(s) (2): AMD Athalon XP 1800+ DIMM: KVR266X64C25/512 I have been running two KVR266X64C25/512 for about three years on this server, but when I install two of the same chip W2KAS crashes with a different STOP message each time, and never in the same stage of bootup. Sometimes it will make it into the OS and allow me to run an application, but the moment the application loads the OS crashes to a reboot. I tried inserting the /PAE switch in boot.ini, but this has not corrected the problem. However, when I remove the two new DIMM's W2KAS b…
-
Printer and Network Drives not mapping w/ Roaming Profile
by Guest Beyuduzz- 2 replies
- 1k views
I am running a mixed NT/2000/2003 Server environment. I got folder reidrection for desktop and my documents, and am testing roaming profiles with select users. They initially had local profiles on their 12 computers, but some users requested roaming profiles. The problem I am having is that after setting up roaming profile path, their network drives, and printers are still different on each machine. Any thoughts on this. There isn't anything out of the ordinary in the event logs. Thanks, Tom
-
Event ID: 1055\1069 Source: ClusSvc
by Guest Dmitry- 2 replies
- 726 views
help, it is my problem, it is the same problem. I have Win2k SP 4 Event ID: 1055 Source: ClusSvc. Category: 2055 Cluster File Share resource 'Office' has failed a status check. The error code is 64. For more information, see Help and Support Center at... ======================================== Event ID: 1069 Source: ClusSvc. Category: Service Cluster resource 'FS Office' failed. For more information, see Help and Support Center at ==================================== How to settle this truble?
-
Event Source:MRxSmb , Event ID:8003
by Guest Santosh K.- 2 replies
- 790 views
Hello Seeking suggestion from expertise... In one of our server we are getting the below error very frequently. Event Type: Error Event Source: MRxSmb Event Category: None Event ID: 8003 Description: The master browser has received a server announcement from the computer .... that believes that it is the master browser for the domain on transport NetBT_Tcpip_{04AE5417-6672-4574-. The master browser is stopping or an election is being forced. any suggestion from experts will help me to address this query. Thanks in advance Santosh K.
-
Cluster failed to start
by Guest Suriyana- 2 replies
- 571 views
Hi, We have an active and a passive node clusters. After applying Win2k SP4, the active node is up and running but we can't get the passive node to work. Appreciate your help. Here are the errors in the event log. Event ID :10005 DCOM got error " The service cannot be started, either because it is disabled or because it has no enabled devices associated with it." Attempting to start the service NtmsSvc with arguments "-Service" in order to run the server. Event ID: 7031 The Cluster Service terminated unexpectedly. It has done this 75 times(s). The following corrective action will be taken in 960000 milliseconds: Restart the service. E…
-
Windows 2008 install
by Guest Microsoft- 2 replies
- 576 views
Hi I have win2000 advanced server and would like to know how to get windows 2008 running on the same server. Do I upgrade or simply install and overwrite existing operating system? The server itself has no data so it can be overwritten. Oliver
-
Password file location in windows2003 and 2000 Server
by Guest Ramana- 1 reply
- 1.2k views
Hi, This is Ramana, i have question on windows2000 and 2003 Server, i want know the password file path , Means the location of the password file which is stored. if i forget my administrator password? Thanking you in advance.... Thanks Ramana
-
Clustered Drive corruption
by Guest Jake- 1 reply
- 521 views
I have approx 50 Win2k AS 2-node File and Print clusters connected to IBM FastT200 Fibre Arrays, configured with a Q: quorum drive, D: data drive and 2 spooler drives for Windows and Unix printing. The D data drives continually get MFT corruption, eventually causing drive failure, however there is no corruption on any other drive. The d: Data drive contains user profiles, homedirs, shareddata and shared folders for application data and DHCP and WINS db's. Although a the majority of I/O is on this drive it is well within the limits of the hardware. After running a chkdsk d: /f on the drive a read only chkdsk shows no corruption. However a day later the…
-
Changing SCSI card
by Guest Jesper Lindholt Bach- 1 reply
- 496 views
Hi We have a server runing Win 2000 server. on at SCSI HDD. The SCSI controller went down, so we had to buy a new one. - But our problem is, that when we try to start up the server, WIN 2000 goes down with a "Cant acces boot device". I now it is begause that we need to tell WIN 2000 to use a new driver, but how do we do that ?? Hope that someone can help me. Regards Jesper
-
Types of ports in routers
by Guest Big Sky- 1 reply
- 479 views
I've been interested in getting a switch for my network as I am running out of ports on my wireless router. I even have a Belkin wired router downstream that has the DHCP turned off so it can work as a hub (switch?). I've read about the inherent advantages of a switch versus a hub. But I was wondering, does a wireless router (lower level DLink G) have a built in hub or a switch? I can't find it in my documentation. It just says it has 4 10/100 ports. If its a hub, perhaps it would be better to run all my computers into a switch with a single connection to the router. Then my computers would get better speed for gaming, accessing shared files, etc. Of course…
-
Advanced Server and WINXP PCs
by Guest Big Sky- 1 reply
- 514 views
I have a Shuttle P4 2.2 GHz PC (1GB ram, 200GB HD) that I thought I'd turn into a server for my home network consisting of all WinXP PCs. I intend to use this PC to (a) store photos, videos, and important files for shared use and (b) install a Hauppauge card with Snapstream software to share TV around the house. I don't intend to use it as a backup device because my 100MB/s wired LAN would be slow as would the computer sitting on an 802.11G connection. I'll use internal HDs or external USB HDs for backup. Nor do I intend to use it as an FTP server. It will only be accessed by PCs on my LAN. Does Advanced Server play well with WinXP PCs? I've had …
-
basic to dynamic
by Guest Alberto Brivio- 1 reply
- 545 views
Dear All, I have a cluster configuration with 2000 Advanced Server and on a machine I can't upgrade from basic to dynamic a disk in order to create a mirror set. Anyone of you have an idea? Regards Alberto Brivio
-
Memory.dmp
by Guest Fpgcorreo- 1 reply
- 595 views
Hi, I have two servers Windows 2000 Advance Servers working in cluster and the other day, the primary node make a reboot unexpectly, and after that I only have a MEMORY.DMP file 80mb size, and i dont known how to explore because there are a lot information that seems to be advice and not indicate the problem itself. Please can you give me and advice, I dont know if there are a tool for explore .dmp files. I give you some of the event viewer events loged after the reboot: Event Type: Information Event Source: Save Dump Event Category: None Event ID: 1001 Date: 18/7/07 Time: 18.21.38 User: N/A Computer: CLUSTERA Description: The computer has rebooted …
-
Registry Size for Win2000 Adv Server
by Guest Nate- 1 reply
- 449 views
I'm getting an error message saying "Please increase the registry size." It's a message that pops up randomly. Does anyone know how to go about doing this? Nate
-
Keyboard and mouse not recognized
by Guest BI_Guy- 1 reply
- 630 views
System was working for years I was running SP4 Encountered startup problems, system stalled when booting. Able to recover with recovery console using original install disks. Keyboard recognized at recovery console. System now boots the login screen but keyboard and mouse are not recognized. I have tried PS/2 and USB keyboard/mouse without success. What should I do? Should I reinstall SP3 and SP4 can I do that from the recovery console?
-
MSTSC: Flipping between sessions within a session
by Guest John A. Bailo- 1 reply
- 423 views
Suppose I terminal serve to a server, and from there terminal serve to another server (I have to do this for security reasons - I cannot directly connect from my workstation). Workstation (A) -> Bastion Host (B) -> Target Host © All my sessions are full screen. Now, I want to keep Session C open, but flip back to Session B. How can I do this? Also, I might want to open several full screen sessions from (B) -- (D), (E).... Workstation (A) -> Bastion Host (B) -> Target Host © Bastion Host (B) -> Target Host (D) Bastion Host (B) -> Target Host (E) How can I flip back to (B),…
-
Experience Storage folks
by Guest tstafford35@gmail.com- 1 reply
- 508 views
I work for a clustered storage company here in the Pacific Northwest, and was wondering if anyone had experience with NDMP or Inifiniband or knew of some people with this experience looking for cool new opportunities? Your help is greatly appreciated, thanks.
-
Server 2000 error
by Guest prashantab@dataone.in- 1 reply
- 479 views
I am trying to install MS WINDOWS 2000 server on the desktop PC with Intel D945GCNL M/B. I am getting the error while installing the windows 2000 server for NON compliance ACPI Pl. disable ACPI from BIOS or update bios. I Updated the bios from Intel Web site but the problem is same I check for disabling from BIOS but there is no option to disable it. Pl.help urgently Thanks
-
Empty Folders in BKF files? Windows Backup not working!
by Guest Paul- 1 reply
- 653 views
Hi everyone - I'd be really grateful if you could help please. when I try to restore from my BKF file the folders appear to be empty! The correct directory structure is in place, but why are they all empty? the BKF file is huge, so the data must be in there somewhere?! What am I doing wrong?! Any help would be really appreciated. Thanks!
-
400GB supports for window 2000 advanced server
by Guest Evansmedical- 1 reply
- 585 views
I imaged my IBM server running on window 2000 advanced server with 280GB raid 5 harddisks unto another server with 400GB single seagate drive successfully,but it can not see more tha 128 GB of the 400GB disk?Please i need an assistance. NOTE : I have already installed service pack 4,yet no headway.
-
AD creation error
by Guest Paul Smith- 1 reply
- 550 views
I am trying to create a new AD in windows 2000 server but i am presented with this error: "The operation failed with the following error" "DNS request not supported by name server." help me please!!
-
Patches available for Win 2000 Advanced Server
by Guest Chukwuma Anyiam- 1 reply
- 421 views
Hi!, I would like to know the available patches for Win 2000 advanced Server. I once had a virus on my w2k adv server that periodically shuts down my system.Help pleeeease!!!!
-
Website problems!!
by Guest Paul Smith- 1 reply
- 664 views
hi there i know it might not be the right forum to post such question but i really need some help and quick :S i have a squid proxy installed on a red hat server and i also have dansguardian software (blocks certain sites). now to the problem...i cannot access a particular site which prompts a username and password upon connecting to it...its giving me authentication error just as like i have entered a bad username and password...but i did not it gave it immediately and the dialog did not appear!! i tried connecting directly to the internet without using this proxy server and it worked like a charm so problem is not related with browser or software but rat…