Windows 2003 Server
Windows 2003 help and discussions.
9221 topics in this forum
-
Random shutdowns on 2003 servers
by Guest George Nussbaum- 4 replies
- 335 views
Hi all, I have noticed that we have had random shutdowns of servers. Some actually still ping, but you cannot get to a console or other interface to see what is wrong and have to reboot them. The only thing that shows up in the Event logs is the "The server shut down unexpectedly...". I checked the power sources that they are connected to and the are fine. Any thoughts as to what it might be? Also, we run virus scanners, so I'm pretty confident that it isn't that. Thanks, George
-
1.1 Net SP1 Install
by Guest CRSTeK- 0 replies
- 186 views
I am getting the following error when trying to apply this update: "The upgrade patch cannot be installed by the windows installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch" ..net 1 is on here as well as I verified the windows installer is correctly installed... Any ideas? Thanks, Lance
-
DHCP Static route
by Guest ¡!Aidemin!¡- 4 replies
- 367 views
Hail! Is there any way to change the subnet mask configuration on a manually added static route on a DHCP server (Windows 2000 ou 2003) to one different than /32 (i.e. /16)? Thanks!!! -- ¡!Aidemin!¡ "MBA é o que dá o direito a uma abóbora de ser chamada de pumpkin"
-
Administrator account not able to connect to IE for critical updat
by Guest mark@ctcommunications.com- 0 replies
- 182 views
This is a strange one. In trying to do updates, connect to the internet for tech support, etc... on my DC I can not get internet access when using the administrator account only. When I use my AD log in or anyone elses with the rights it works just fine but when I try to use the administrator account it times out, DNS error, etc... this is really weird. My SDC does not have the same issue just my primary.
-
Please help, major help needed, thanks, ras issues
by Guest Dave Beanie- 1 reply
- 192 views
ok, long story but please read through I have a windows 2003 server, installed RAS, setup RAS, and I cannot VPN into it, I keep getting error 800. I cannot ping the server when I have RAS running, once I turn it off I can ping the server. I do not have any firewalls running, no anti virus here is what i have done: opened several ports on router, 1723, 47-51, 3389, 500, still no changed the static routes went through manage servers and step by step on the help for setting up ras I have done several other things but cant remember.. I have my laptop plugged into the router and the server is into it also, I can vpn to its ip address and it doesnt give me …
-
iisadmpwd virtual directory under a different website other than default possible? (change password feature)
by Guest markm75c@gmail.com- 1 reply
- 207 views
iisadmpwd virtual directory under a different website other than default possible? (change password feature) Does anyone know how i could follow this article..http:// support.microsoft.com/kb/297121/ and set it up so that the i iisadmpwd folder was in a different web site other than the default one? Or if this is even possible? Thanks
-
NTP Server
by Guest msnews.microsoft.com- 1 reply
- 203 views
I have a 15 server Win2k3 domain. How do I configure NTP service for my Cisco and Nortel devices? Thanks, Troy
-
Shut Users Down
by Guest Wolfie301- 7 replies
- 472 views
Is there a way to force users to shut down? I have set up wsus but not many computers have appeared in my wsus group and I think this is because they never log off or shut down. They also need to re-boot for other updates such as AVT. Any help very much appreciated.
-
- 0 replies
- 170 views
Hi, we defined a group policy rule (on several computers), that specify which groups are allowed to logon through Terminal Services. Even I have disabled (or modified) the GPO, I still cannot connect by through TS with another account not listed in the old GPO. I would like to modify this value directly from registry in the client computer. Someone can tell me wwhere does GPO store this parameter ? Thank you -- Pascal
-
Mapped drives intermittent on VPN
by Guest Lewej- 0 replies
- 171 views
Hi We have about 20 laptops in the field that all work OK - apart from one, whose mapped drives seem intermittently available via a VPN. Some weeks they are seen and availalbe. Other weeks though they appear in Explorer, if the user clicks on them they are empty and have no subdirectories. Clearly this is causing issue. There is nothing amazing about our L2TP VPN. I have asked the user to reboot their broadband router and laptop. Even if they cannot connect to the mapped drives their Outlook and other functions till seem to work OK on the VPN. ANy ideas please! TIA Lewej
-
Password Length
by Guest Peter Labelle- 2 replies
- 256 views
Server 2003 will only let me set the min password length to 14 caracters. How do I increase it to 20? thanks Peter
-
Automated deployment services question
by Guest Mikal Hjortby- 0 replies
- 181 views
Hi, Is there a way to add predefined user variables automatically to all new discovered devices as default? If so how can i do this? Thanks in advance! :)
-
Message before Log on
by Guest Wolfie301- 1 reply
- 214 views
I would like to know where the settings are so that I could type a msg to users, warning them that by logging on to the system that they must abide by the rules. This may have been asked before and if so I apologise but I can not find the solution to my question. Thanks
-
network cable unplugged.
by Guest t.restivo@comlabs.com- 2 replies
- 249 views
I have two Windows 2003 64 bit servers. Both have three NIC's in them. The onboard network card works on both servers. The added cards are Realtek 8139 10/100 PCI cards. One server shows a code 10 error on both added cards. The other server shows network cable unplugged. However there is a link light on both the card and the switch. I have the latest drivers I could find loaded. I removed the two cards from the server with network cable unplugged and replaced with one Trendnet card (apparently it is the same card and the Realtek). I have the same issues. Please help.
-
windows FAX
by Guest bryanevans1- 0 replies
- 173 views
I'm running a w2k3 enterprise server as an 8 port fax server using a Multitech ISI5634UPCI/8. It receives sever hundreds of fax's a day. However, about one in 5 fails with the following error:” Reception error" "Unknown fatal error" "0x0000000c" MultiTech Systems MT5634SMI-V92" There is no source pattern to these errors and no patter to the receiving line. I've had all of the lines tested. Disabled Compression and I've updated the modems to the latest Windows drivers (it’s on the Windows HCL): Below is a single fax failure log. Any info is welcomed.... [11/13/2007 11:34:21] Device name: MultiTech Systems MT5634SMI-V92 Permanent TAPI line ID: 4B0ECC4 …
-
DHCP Service failure
by Guest Several Login attempt- 2 replies
- 264 views
hi we have installed win 2k3 sp2 as ADS, DNS, DHCP on the same server machine. we found one repeated error is created regularly by DHCP Service in event viewer stated as: Event ID:1059 & the error message as: "The DHCP service failed to see a directory server for authorization." We have noticed the dhcp mmc, the dhcp address lease icon shown as like "system monitor & over on that ink pen tip" mark. but the server is leased addresses normally. need solution to solve without any reinstall any components. help me out. Rajaguru
-
Windows 2003 directory Quotas
by Guest Simon Murray- 0 replies
- 164 views
Hi, I'm currently running Windows 2003 enterprise Edition with SP2 and would like to apply directory quotas. Unfortuantely, it appears that this feature is only available if I upgrade to RC2 ??? Is it straightforward to upgrade to RC2 from Enterprise server (SP2) or is there any other good third party software I should be using instead. Many Thanks.
-
HP2600N Nightmare on Win2k3 server
by Guest Blackberry- 2 replies
- 242 views
Hi All Been installing HP2600N's at schools no problem in a server environment. Installed 2 today (ie configured static ip on each (school rule), installed the driver on the Win2k3 server via the installer cd, restarted the server (mandatory), shared the printers and config'd GPO to 'push' these printers to the user accounts) and had a absolute shocker when I came to log on with any user account. Basically bombs with a exception error when each printer drops in, says that Windows' DE has protected me from the SubSpool something app, stopped the print spooler service and won't let me restart it and lost all of my printers (inc 2 other network ones th…
-
Drive mapping problem
by Guest Pascal Goulet- 9 replies
- 574 views
Hi all, Here is a brief description of my problem. Every once in a while (like once avery 3-4 months) I have a very strange problem. One of my user (I have 900 of them) is unable to map network drive via my login script or map the printer who are host on the same server. The weird thing is that my login script do not only map ressources from this server. And every other map drive are mapped without problems. I do not have any lead on the event log of the client computer, the server who does'nt share his ressources or the DC. I first tought it might be a SID problem cause if I copy the user from the AD and recreate it with the same login and grou…
-
Any thoughts with this?
by Guest David- 0 replies
- 174 views
Hi We have several hundred remote users. It has come to my attention that when they VPN in they don't update their DNS records automatically. This can only it can be done by running the ipconfig /registerdns command. We have a RAS server on the network and two DHCP servers which assign the clients IP addreses. Both DHCP servers are relay agents for the RAS. I have checked DHCP and it is set too "Always dynamically update A records and PTR records" both on the server level and on the scope. I think the problem maybe that a computer only registers its DNS when it starts up, and when they initialise the VPN to the office it doesn't. On the properties of the V…
-
Problem with a roaming profile
by Guest theGerm- 2 replies
- 280 views
I have a user that has a roaming profile. However, she cannot access her My Documents folder or cannot open outlook because of permission problems. When she logs out she cannot copy stuff to the server. Please help
-
Windows Server 2008 Webcasts
by Guest Darrell Gorter[MSFT]- 0 replies
- 184 views
On Demand Virtual Labs: Windows Server 2008 Beta 3 Server Manager: http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=103234357 0&EventCategory=3&culture=en-US&CountryCode=US Windows Server 2008 Beta 3 Server Core: http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=103234728 7&EventCategory=3&culture=en-US&CountryCode=US Using PowerShell in Windows Server 2008 Beta 3: http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=103234491 9&EventCategory=3&culture=en-US&CountryCode=US TechNet Webcast: Better Together: Windows Server 2008 and Microsoft's System Center Family…
-
Shared folders - connection limit
by Guest DeFactoITguy- 4 replies
- 326 views
Hi, Background: the calibration lab I work in is looking to set up a server-type machine where 10+ users will run a non-MS server-side application ifrom a shared folder. We are trying to figure out which version of Windows Server to purchase. The desire is for this machine to be a simple client in a large domain, i.e., not a domain controller, and not running any of the server programs that come with SBS 2003. My question concerns the number of concurrent connections to shared folders in SBS 2003. I know than in XP Home the connection limit is 5 users at a time to a shared folder and 10 for XP Pro. Is there a limit in SBS 2003 (or regular Window…
-
DFS vs Symantec Cont Backup Protection?
by Guest Cwhitmore- 4 replies
- 343 views
I'm currently running Symantec's Continuous Backup Protection server for Windows 2003 to replicate shared documents to a remote location over T1 lines. It's dog slow so I'm thinking of switching to DFS instead. Anyone have suggestions?
-
increasing disk space 1 2
by Guest Greg- 35 replies
- 1.7k views
I have an HP Proliant ML350 server running Windows Server 2003 and have two 34GB hard drives that are mirrored using a Basic (not Dynamic) disk setup. I have run low on disk space (2GB free) and would like to just increase the size of the current logical drive. I have installed two more 34GB drives that are mirrored (I assume because of the RAID controller settings since they show as one 34GB logical drive). When looking at the "Disk Management" profiles of the installed disks under the Computer Management console, it shows the existing disks as "Disk 0" Basic 33.91GB Online Healthy (System) and the newly installed disks as "Disk 1" Basic 33.91GB Online…