Windows 2003 Server

Task Scheduler job Hangs (rundll32 printui.dll,PrintUIEntry)

October 4, 2007 by Guest Larry Bird

3 replies
251 views

I'm running Windows 2003 Standard Edition with Service Pack 1. My problem is related to a batch job hanging when initiated via Task Scheduler. I have a bat file that when initiated via a double click it runs fine with no problems. However, I take the same batch job and initiate it with the Task Scheduler and it seems to hang. I've already performed the following task to try and make things work: 1. Change all of the drive mappings to UNC. 2. Checked to make sure that access is permitted using the UNC. 3. Checked to make sure that local permission are appropriate on the local machine. 4. Made sure that the "userid" and "pa…

Last reply by Guest, October 5, 2007

name res issues

October 4, 2007 by Guest Justin Rich

2 replies
336 views

i have a server that is having problems resolving names. i have the DNS servers configured correctly (responds fine for other systems) and when i run an nslookup it times out getting the name of the dns server when i first start it and any request i make times out. i tried switching nslookup to the backup server and i get the same thing. I just recently assigned two new ip's to the primary nic and this box is also running VM Server. never had a problem with nslookup not working so i dont really know where to go to start troubleshooting this. Thanks Justin

Last reply by Guest, October 5, 2007

how can i find out whether the regional settings has been changed

October 5, 2007 by Guest Seth

0 replies
175 views

I want to find out whether the regional settings has been chanced by someone in the last 2 or 3 days. Any ideas?

Last reply by Guest, October 5, 2007

SBS 2003 move to new hardware

October 4, 2007 by Guest David S

4 replies
305 views

We have a non-standard "server" (it's actually more of a PC) running SBS 2003 and would like to migrate the installation over to a real server and keep everything the same. Basically just move the installation from one server to another and retire the old server. Is there a good KB article that outlines the necessary procedure? Any help would be greatly appreciated.

Last reply by Guest, October 5, 2007

«æ! ¤â¾÷²M³f5§é°_

October 5, 2007 by Guest DTC

0 replies
121 views

¦UºØ³Ì·s¤â¾÷, ¥N²z§Y±µ²M³f¶}Ü, ¥þ³¡5§é-8§é!

Last reply by Guest, October 5, 2007

replacing mobo in emachines

October 5, 2007 by Guest sm14

1 reply
207 views

I have an emachines model #2245,its about 5 years old. Can I replace the motherboard inexpensively or I've been told that emachines parts are priporitary and must be the same part # or a new OS has to be installed

Last reply by Guest, October 5, 2007

changing drive install letter from d to c

October 4, 2007 by Guest ric926

9 replies
595 views

tried to do an uograde from svr00 to svr03, i have a 3 phys hd (ide) 2 drives on a stripe (sata) and 2 scsi drives striped, now my boot.ini is right 0/0/0/1, but it shows as my d (letter) drive, can i swap c and d? during the upgrade it failed and there was no way to go forward or back so i unplugged the sata and the scsi, i guess thats how the letters got messed up another interesting thing when the system boots, it posts then polls the scsi and drive 1 says its c, and drive 2 says its d, then it polls the sata. but even w/the scsi saying they are c and d it still picked up the master ide on chnnl 0 thanks -- rf

Last reply by Guest, October 5, 2007

video problem

October 4, 2007 by Guest forum.microsoft.com

1 reply
175 views

for windows 2003 standard edition on an Intel server with PCI-express, no AGP, what video card is supported? I looked under the Hardware catalogue, I found ATI with AGP type (Rage XL but not PCIE listed, I looked under NVIDIA but not found. The problem we have is that when physical console is used mixed with Remote Desktop console access, rebooting or shutdown can lead to crashes pointing to video driver problem. The likelihood of such crashes increases substantially after applying updates form Microsoft - almost guaranteed each time we apply Microsoft update we are right now using Sapphire x550 ( ATI chipset) as supplied by the vendor

Last reply by Guest, October 5, 2007

Event ID 566

October 4, 2007 by Guest Eric Crumpton

1 reply
216 views

I get the following Security Event entry every few days. Same user and all every time. Does this indicate corruption in AD or is there some other explaination? Event Type: Failure Audit Event Source: Security Event Category: Directory Service Access Event ID: 566 Date: 10/4/2007 Time: 7:58:47 AM User: mydomain\computer1$ Computer: Domain Controller Description: Object Operation: Object Server: DS Operation Type: Object Access Object Type: dnsNode Object Name: DC=133,DC=10.168.192.in-addr.arpa,CN=MicrosoftDNS,CN=System,DC=mydomain,DC=local Handle ID: - Primary User Name: Domain Controller$ Primary Domain: mydomain Primary Log…

Last reply by Guest, October 5, 2007

Software RAID 5 performance

October 4, 2007 by Guest Miha Markic

1 reply
197 views

Hi guys, What speed perfoormance (read, write) can one expect from 3x250GB SATAI drives bound in software raid 5 array on W2K3x64? I am asking this because write speed looks very poor ~4MB/s while the CPU is only using 10% or something. -- Miha Markic [MVP C#, INETA Country Leader for Slovenia] RightHand .NET consulting & development http://www.rthand.com Blog: http://cs.rthand.com/blogs/blog_with_righthand/

Last reply by Guest, October 5, 2007

win 2003 std vs 2003 r2

October 4, 2007 by Guest jerry C

1 reply
177 views

Is win2003 STD with sp2, the same as win2003 R2? jerry c

Last reply by Guest, October 5, 2007

Synchronize folder

October 4, 2007 by Guest Hugo

4 replies
390 views

Hi ! I want to synchronize (make real time mirror) one folder (and subfolders) to another folder on another server. If a file is modified, deleted or new files created on server a , I want that change to be morrired to the destination server. Any suggestion ! Hugo

Last reply by Guest, October 5, 2007

Unable to telnet to port 139 and 445

October 4, 2007 by Guest Donny

0 replies
166 views

I'm unable to telnet to the filesharing ports 139 and 445 on my windows 2003 server. If I logon locally onto the server and telnet to that port, I'm still unable to. Netstat -an also doesn't show that it's open. I tried to enable Netbios of TCP/IP on the network settings but was still unable to telnet to the ports. Is there a service which I have to start manually or something which I have to install? What needs to be done for these ports to be open on the server?