Windows 2003 Server
Windows 2003 help and discussions.
9,221 topics in this forum
-
ntbackup issue using /p flag on Server 03 with an LTO Ultrium 3 drive
by Guest Gareth Howells- 0 replies
- 183 views
I have created some batch scripts which run as scheduled tasks on one of our servers. There are 2 scripts for each day, one of which backs up to a file for the onsite backup, the other of which backs up to the server's tape drive for the offsite backup. The onsite backup script works fine, using the following command: c:\windows\system32\ntbackup.exe backup "@C:\Backup Scripts\onsite.bks" /n "Tuesday morpork onsite set created %morporkdate% at %morporktime%" /d "Tuesday morpork onsite set created %morporkdate% at %morporktime%" /v:yes /r:no /rs:no /hc:off /m normal /j "Tuesday morpork onsite" /l:s /f "M:\Tuesday.bkf" where %morporkdate% and %morpork…
-
Must W2003 BACKUP utility use the Floppy Drive.
by Guest ThomasAJ- 4 replies
- 270 views
It seems the floppy drive A is not working. I get "No ID address mark was found on the floppy disk" whenever I put a floppy in. This problem was discovered when I did a FULL BACKUP using the BACKUP utiliyt in W2003. So, does BACKUP have to use the floppy or can it write its files to CD. OR is there a good backup utility on the market that does not cost $1000 just becasue it's used on a server. (the server is a very simple setup and has 5 users on 1 app thru Terminal Services). I am loath to open the guts of the server and install another floppy - or am I being too cautious? OR Is there a setting on W2003 to tell it to use the floppy or something like…
-
NtBackup: "The backed up data is corrupt or incomplete"
by Guest Simone Meggiato- 5 replies
- 441 views
Every night I was used to perform a scripted backup of the virtual machines (VMware server 1.x) that are on a Windows 2003 host server. The VMs are suspended just before to invoke ntbackup and restored at the end. Since a couple of weeks i get errors like this in the ntbackup log: 'WARNING: Portions of "\Virtual Machines\EureSolver\EureSolver-flat.vmdk" cannot be read. The backed up data is corrupt or incomplete.' It is always related to the large virtual disk .vmdk files. the invoked ntbackup command line is: 'start /wait ntbackup backup "D:\Virtual Machines" /J "%NAME%" /T "%NAMETAPE%" /N "%NAMETAPE%" /D "%NAME%" /V:no /L:f /M normal /HC:on /SNA…
-
Wallpaper for terminal session
by Guest Gaurav- 2 replies
- 201 views
Dear Folks,, We have win 2003 server which is accessed by remotely by other system administrator....I have created one security policy file in JPG to show the remote user. I want to display that as wall paper on desktop ......so whenever any one get the desktop through MSTSC ...that wall paper shows on his desktop.. HOw can i make a wallpaper for each & every terminal session same Thanks in advance gaurav mathur
-
File Server Resource Manger Service not starting
by Guest Sam- 4 replies
- 403 views
Hi I am running Server 2003 R2 x64 and cannot get the File Server Resource Manager service to start. When I try to start it manually it gives me "Could not start File Server Resource Manager service on local computer" Error 193: 0xc1 Any ideas??
-
Robocopy help
by Guest Cyborg- 5 replies
- 302 views
Hi, I'm using robocopy.exe to move old files to another server, I have started copying files that are create from 31/12/2000 and before. Now all the files do get moved across, but it will also create the entire orginal folder structure, so I get folders with nothing in them because no file meet that age, so why does it create the fodlers? eg robocopy.exe G:\marketing F:\Archive\Marketing\2000 /E /copyall /move /minage:20001231
-
backing up questions?
by Guest lenny- 2 replies
- 287 views
Hi, I have a Windows Server with another Terminal Services Server. I have setup a backup on the server to happen every night with a DAT tape. As you might have noticed from earlier posts this is now getting quite full. I have also noticed that there isn't a backup facility on the TS so the main server is backing up C and D on that machine which basically includes all the shared folders that have been setup but nothing is backing up the Database folder on TS or any of the users files under C:\Documents and Settings\User. Each user is using pop3 email through outlook via their TS login so I suppose their emails aren't being backed up either. Any suggesti…
-
Server shuts down randomly
by Guest smallbizguy- 2 replies
- 290 views
Our Windows 2003 server randomly shuts down. It happens approx 3 to 4 times per week usually at night. No helpful messages in the event viewer. One thing that I have found strange is that when you select Restart on the server the server shuts down and when you select Shut Down the server restarts. I have already replaced the memory but that did not help. Any suggestions would be appreciated.
-
Backup errors
by Guest boba- 1 reply
- 227 views
I am getting backup report with following errors: UsrClass.dat.LOG error: "the Process cannot access the file because it is being used by another process" pointing to c:\docs & settings\administrator\local settings\application Data\Microsoft\Windows\UsrClass.dat.LOG NTUSER.DAT error with the same message pointing to C:\Docs & settings\administrator\NTUSER.DAT any idea how to fix it or does it matter? Thanks!
-
Mac laptop connect to 2K3 SBS
by Guest Tony Phan- 1 reply
- 230 views
Hi, I have a Mac laptop and I have trouble to connect to a share drive on the 2K3 SBS domain. I am sorry if my question is not in this discussion board. Please help to show me where I can post my question. Regards.
-
unable to backup system state
by Guest BPW- 0 replies
- 218 views
Windows Server 2003. Domain controller. Fully sp'd and patched. NTBackup reports this when trying to back up the system state: Volume shadow copy creation: Attempt 1. Error returned while creating the volume shadow copy:0x8004230c. Error returned while creating the volume shadow copy:8004230c Aborting Backup. ---------------------- The operation did not successfully complete. ---------------------- I can't find much on this that isn't supposed to be for Vista. We've checked the knowledgebase, Google'd it (sorry Microsoft!), etc. Nothing useful. No-one seems to know what the code means. We've applied the 940252 and 940349 hotfixes. We normall…
-
Roaming profiles not created- TEMP profile only
by Guest IT@C- 8 replies
- 587 views
Hello, A recent problem has surfaced: - When a new user logs onto a workstation in the BNE site (using the BNE DC) - the user does not receive a roaming profile and errors are displayed. - The Home directory is created successfully. Our network: Windows 2003 Server SP1 Clients = Windows XP Pro SP2 Active Directory network Four DC's in the network- MEL1, MEL2, SYD, BNE, across four sites We create a user in the following way: 1. Open Active Directory 2. right click on Organizational Unit BNE and select new user 3. Enter user details 4. Set Password 5. Select exchange server 6. Once created right click on user and go to properties and select …
-
Windows 2008 & Win XP Client blues - Network name cannot be found
by Guest Ziga Jakhel- 6 replies
- 480 views
Hi, everyone! I've just installed Windows 2008 Enterprise in a Virtual PC 2007 virtual machine. The server is set up as a PDC with it's own domain forrest, and has a DNS server. DNS resolves Ok, but I have 2 major issues. 1) If connecting to/from WinXP / Windows 2003 computer, the network share is visible, but I cannot copy files. The operation fails after a few seconds, with the "Network name cannot be found" (or "is not available") error. This works OK, if the client is Vista, so I presume it's a SMB 2.0 issue. Any hints on how to force the w2k8 box to use SMB 1.0? 2) From the w2k8 box, I cannot browse to http://www.microsoft.com, http://ww…
-
Windws Update scheduled install through GP
by Guest Jim A.- 2 replies
- 213 views
I have clients setup, through group policy, to download updates from my WSUS server and install them on Thursday at 6pm. My question is, do these computers need to remain connected to the network in order to install the updates? Because I have users who want to take their laptops home with them on Thursday night, but I am unsure as to whether the update will install if the computers are not on the network at 6pm.
-
Netlogon Share-access denied
by Guest Steve- 1 reply
- 202 views
One of our remote administrators uses a folder under the Netlogon (\\domaincontroller\netlogon\gposhare) for GPO batch files/logon scripts. Since I put in the new domain controllers, he gets 'access denied' when trying to edit the GPO batch files or post new ones. I am the domain admin, and it works fine. He is in the AD security group that has full control of this share. Any help is appreciated. steve