Windows NT Server
Windows NT terminal server help and discussions.
3524 topics in this forum
-
Unable to use Terminal Server CALs purchased
by Guest Tony Rigdon- 5 replies
- 526 views
On a Windows 2003 server, SP2 installed we have the Terminal Licensing Server running, setup using "Per User" CALs. Initially we started out with 25 of these until we purchased an additional 20 to get us to 45 users. Everything works fine until we reach the original 25 limit. Once 25 are in use, users are unable to connect. When going into the "Terminal Server Licensing" screen on the server, it displays three lines (slightly abreviated below): Product Type Total Available Issued ------------------------------------------------------------------------------------------------ Existing Win…
-
Word crashes for one user only
by Guest Colin- 1 reply
- 466 views
Hi, For some reason a single user, on terminal services, has a problem with word crashing, no other user is effected by this. This is the events from the events viewer: Event Type: Error Event Source: Microsoft Office 11 Event Category: None Event ID: 1000 Date: 14/10/2008 Time: 16:08:12 User: N/A Computer: ****** Description: Faulting application winword.exe, version 11.0.8227.0, stamp 486d648f, faulting module ntdll.dll, version 5.2.3790.3959, stamp 45d70ad8, debug? 0, fault address 0x0004afb2. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 41 00 70 00 70 00 6c 00 A.p.p.l. …
-
TS CAL Question
by Guest Calen Slezash- 2 replies
- 451 views
I was told by someone that a retail pack of "Terminal Services Client Access Licenses For Microsoft Windows Server 2008" is able to be installed on a Windows Server 2003 Terminal Server. I was doubtful, but tried installing them anyway. When doing so, I receive an "Invalid Code" error. I bet the guy a case of beer that it couldn't be done. Who gets the beer?
-
Change Temporary Device to Per User License
by Guest Dave- 5 replies
- 581 views
I have a single 2003 TS Licensing Server. This was setup with 25 Per Device Licenses. We started getting the messages re Temp License will expire in x days. I added 25 per user licenses, but people on Temp licenses still get the message and cannot connect at all once it expires. How do I change the people on Temp Device licenses to use the per user licenses? Thanks
-
Issue to launch Reader from IE in TSE 2003
by Guest fox- 2 replies
- 389 views
Hello, I installed my 2003 TSE server, Acrobat Reader 7 (in mode change user /install). Some users couldn't launch the reader from a webapplication under IE6. These users have a pop (the file is not good - SAVE or CANCEL....). For the others users for the same file, the reader work normaly. Didier
-
TS 2008 recycle bin corrupt for users
by Guest Aart Jansen- 1 reply
- 476 views
Hi I have just started seeing 2 users with $recycle.bin folder in their music/video/photos reporting to be corrupt. Is there a way to stop this happening? Is there a way to get rid of all but a single recycle bin folder ? Also is there an easy way to move the users folders ? I have seen the reg change to move new users, but not exisitng ones. Thanks, Aart
-
Cursor issue
by Guest Luther- 1 reply
- 403 views
We have here office2007SP1 installed on citrixservers(CPS4.0 on W2K3SP1) and when a user starts a published version of word or starts word on a published desktop the cursor is not blinking. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\TerminalServer\CursorBlinkEnable From: http://forums.citrix.com/message.jspa?messageID=623603 Is not helping me. Anyone an Idea? the hotfix from http://support.microsoft.com/kb/873418 is not availeble anymore
-
IE security on 2008 TS
by Guest David- 1 reply
- 471 views
Hi, I have 2x 2008 Enterprise TS member servers running. All domain users have problems browsing the web. ActiveX controls cannot be installed (flash, java etc) because they need admin priviliges. Ok I can live with that, but even browsing the web is hard. When they go to a flash based site, they get a yellow message bar at the top "Your security setting do not allow websites to use ActiveX controls installed on your computer. This page may not display correctly. Click here for options". When they click it, they only have a "more information" button, no "enable this content for this site" or something like that. I can't explain to all them that they ha…
-
Re: Sound tansfered to Client after SP1 installed
by Guest Donald M- 7 replies
- 627 views
Re: Sound tansfered to Client after SP1 installed Do you have the hotfix number? I noticed SP2 is out that includes this fix but due to other reasons I can not apply SP2. thanks, Don "Vera Noest [MVP]" wrote: > You can disable audio redirection, but I'm not sure if that applies > to system beeps as well. > > Anyway, I run the hotfix on a number of servers, without any > problems. > But of course, that's no guarantee that it will behave identical on > yours. Like anything else, you'll have to test it. > > _________________________________________________________ > Vera Noest > MCSE, CCEA, Microsoft MVP - Ter…
-
Using Word & Excel 2007 in TS
by Guest Dave Stanway- 4 replies
- 522 views
Hello, We need to run Word & Excel within Terminal Services sessions. I understand I need a volume licensing for this, but does anyone know if we have to purchase the entire Office suite? We only need the two applications. Any help? -- Dave Stanway Corona Network Solutions
-
TS 2000 stuck in Install mode?
by Guest Mike- 3 replies
- 378 views
I recently tried to install printer software on a Win2k Terminal Server. At the end, it asked to reboot, which I did & it looks like the install hasn't finished, as I get a message about it needing to be in install mode when it boots up. How can I fix this? Thanks- -- Mr. Simpson, there are thousands of people like you with no discernable talent. Yeah, they're called Congress.
-
"end a disconnected session" is greyed out ?
by Guest Scott- 1 reply
- 388 views
win 2003 standard 64bit terminal server configuration connections rdp properties sessions override user settings checked "end a disconnected session" is greyed out Is a stand alone server with no AD so no group policy. Anyone know why the "end a disconnected session" is greyed out ? Thank you.
-
- 4 replies
- 480 views
I have been looking all around on the internet to find a solution to this problem I’m writing you about. ISSUE: - This is an example: When a user is using Word and then their internet line cuts out for some reason. They logon to the system again. Open word to recover their document. But no recovery information is shown. I think this must be because the recovery info is not saved to the roaming profile. This means that whenever a user have a connection loss or something that happens so that the user is thrown of our system. They cannot get the auto recover info. This is quite annoying. Is there a way to solve this. So that office auto rec…
-
Certain users cant authenticate to ISA 2004 proxy on Terminal W2k3 toget internet????
by Guest vyaw2003@gmail.com- 0 replies
- 367 views
Certain users (not everyone) cant authenticate to ISA 2004 proxy on Terminal W2k3???? They can access intranet, but not internet. When they try to use IE7 to external webpage they get credential box, they put there details (username tried and domain/username tried) in and the get a ISA access denied error: Technical Information (for support personnel) Error Code: 407 Proxy Authentication Required. The ISA Server requires authorization to fulfill the request. Access to the Web Proxy service is denied. (12209) IP Address There accounts work fine from other servers on the same subnet and on their own pc using IE6 and IE7. If I make a brand new user in the sa…
-
Printing via RDP from W2K8 access denied error
by Guest Roger Vicker- 4 replies
- 464 views
Environment: single W2K8 server domain (no other server of any size, function or flavor) and users on XP over a WAN. The users can connect, work and see their local printers redirected in RDP. However whenever they print nothing ever arrives at their local printer. The server's event log shows an 6161 event. The document Test Page, owned by it, failed to print on printer USERSPRT (redirected 3). Try to print the document again, or restart the print spooler. Data type: RAW. Size of the spool file in bytes: 135341. Number of bytes printed: 0. Total number of pages in the document: 1. Number of pages printed: 0. Client computer: \\RDPSERVER01. Win32 err…
-
TS 2003 Window Display Issue
by Guest CLJones- 2 replies
- 341 views
Hello everyone, I'm new here & have found Microsoft forums are the best place to get help with problems that really stump me. Basically, we have a TS set up on server 2003 (sorry, I know this is a 2008 forum), but the principles should generally be the same. Our users, when they log in, have a clock program that sometimes disappears off the screen & is no longer visible, yet is still running. This program is only displayed in the system tray as there is nothing in the task bar. When you right click on the program, you are given no move option (nor when you right click on the system tray icon). My thoughts on solving this problem were to wr…
-
Profiles Migration
by Guest Steven L Chan- 3 replies
- 475 views
I am in the process of replacing our Windows 2000 TS with a new Windows 2003 box. I would like to know besides USMT, what other migration tool(s) would help me ease the transition over to the new server? I have about 50 users that I need to migrate. Thanks, Steven
-
TS 2008 Single Sign On in Windows XP
by Guest Luiz- 4 replies
- 422 views
Hi, It is possible use TS 2008 Single Sign On in Windows XP SP3 client? How can I do that? Thanks. Luiz
-
Profile wont load stops at Applying Your Personal Settings
by Guest srinathhc- 2 replies
- 408 views
HI TP, I am having similar issue now on windows 2003 SP1,i have gone through the steps specified between you and xrbbaker. and checked for the profile duplication but there was no duplicate entries in my server. the issue is frequently, unable to load the profile for all accounts such as for domain/local accounts.if i/some one login to the server after typing username and password,screen shows progress at applying settings screen but never loads the profile.to resolve this issue i have to reboot the server and solves the problem users can login through RDP and even i can login.it works a for a day/2 again same problem appears then i have to reboot the…
-
Server Activation?
by Guest jawdoc- 2 replies
- 378 views
I have purchased a 5 cal license from a vendor and awaiting the certificates. Do I need these in hand to activate a server for a user based terminal server. I didn't know if the certificates are going to have a serial number or something that I will need to activate the server? Thanks in advance.
-
Strange printing issue with redirected printer
by Guest andreas.fonferek@gmail.com- 2 replies
- 360 views
Hello, a few days ago, a strang printing issue occured. An employee working on a WinXP Pro SP2 Workstation, with a HP Color LaserJet 2550 attached via USB. She works connected with mstsc 6.0.6000 in a terminal session on Windows Server 2003. Until the error occured she could print. And suddenly she couldn't print anymore. We reinstalled the driver. But it isn't even possible to print a testing page from within the terminal session. The Dialog only tells, that it is impossible to print the testing page. Who can help me? Thanks, Andreas
-
desktop heaps
by Guest Tiger Boon- 4 replies
- 560 views
SessionViewSize and SessionPoolSize entries is not listed on HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management Is this normal? Can I just add it back manually?
-
Mappoint
by Guest CSorensen- 3 replies
- 390 views
Hi, Does anybody know where to find documentation about installation of Mappoint 2006 on Terminal Services
-
How to remove "unplug or eject hardware" icon in users' system tray?
by Guest Gregg Hill- 2 replies
- 393 views
Hello! I have a 2000 TS locked down via GPO with only one item left to fix. I cannot figure out how to how to remove the "unplug or eject hardware" icon in the restricted users' system tray for all users other than the domain admin. Anyone know how to do it? Thank you! Gregg Hill
-
new domain admin can't remote desktop DCs
by Guest BFH- 4 replies
- 376 views
Just added a new administrator to the domain admins group. Unlike the rest of us, she can't get a remote desktop on our DCs (although she can on our member servers). When she tries to connect, she gets this error window: "To log on to this remote computer, you must have Terminal Server User Access permissions on this computer. By default, members of the Remote Desktop Users group have these permissions. If you are not a member of the Remote Desktop Users group or another group that has these permissions, or if the Remote Desktop User group does not have these permissions, you must be granted these permissions manually." Huh? This is a Win 2003/S…