samuria

If you download and run hijackthis and post the results it may show some of the problems

Its all so part of Photoshop if you want to remove it type "C:\Program Files\Bonjour\mDNSResponder.exe" -remove at the cmd prompt. If you Google it there is a lot of problems having it running

If you partition the drive it means 1 if windows crashes you can have your data safe on the other partition. 2 You can create an image with something like Acronis of windows on the second partition so if it crashes you can get it back in 20 mins or less 3 It can save a lot of defragmenting On your figures the defragmentation isnt doing a very good job I would expect it to be less than 10% when done more like 3% as this may need boot time defraging

Withe very little info to go on I would guess you need to give the printer an IP or set it up to receive dhcp. I dont know what the default is for that printer

If you run the chkdsk option above and it cant gain full control it should ask if you want it to do it on startup as it can then test it. Another option is fit it into a pc and boot from xp cd goto repair consul and enter the chkdsk into there as the disk wont be locked. There is a lot of free ware that may test the drive for you

The ip range seems ok if you have connected to another network did you enter a key. I would suspect it may be sending the wrong key to sky its picking up dhcp ok and getting a ip dns etc so its seeing the network fine. Normally on the sky box is the wep key preset by sky you dont say what O/S etc but there should be an option to enter a code depending on how its setup normally under wireless network connections. The problem often is who is controlling the card some software will turn off windows and take over and you sometime have to get windows to get control back. Normally it windows wireless zero confige inthe services panel which may be stopped

It could be you are swamping the laptop and its having to resend packets what speed does it connect at? The laptop would be better off with cable if you could. You dont give a lot of info like what O/S what router etc. The best way to do it is to set the laptop up with a static ip if you goto start/run type cmd press return and then type ipconfig /all when your connected you will get an ip address say you get 10.0.0.2 subnet 255.255.255.0 gateway 10.0.0.1 Put this in as a static ip on the laptop(if you roam wit hit you may have to revert it back when connecting to other networks) On the xbox set the ip to one above the laptop so you add one to the last number in the above case the xbox would be 10.0.0.3 give it the same subnet and set the gateway to the ip of the laptop. It should all work. You ip may be in the range 192 and on some routers there is a setting that stops 2 wireless station talking together

or you can type C:\SQL2KSP4\MSDE\setup /upgradesp

There is probably water in the HD from the pictures(joke). try a cmd prompt and then run chkdsk f: /r /f If it cant lock the disk It may ask if you want to check on startup. Do not open the drive with explorer or anything as it will lock it so it can do its job This may take some time what does diskmanager say about it?

Have you tried setting it in your browser? if IE tools/ internet options/conections/lansetting and set to automaticly select settings

Any powerline adapter should work with no problem but they must all be the same type to work some like the one you posted only do low speed other like Max Value 200Mbps Home Plug, Double Unit Pack: Amazon.co.uk: Electronics & Photo work at 200 meg Bt recomend sell these Claim A Free Netgear Powerline Adapter - BT Shop

Yes the install disk is the boot disk. Boot from it and select repair and recover consul. Then enter all the commands one after another and report back

Apart from anything else the main problem is 224MB of RAM that is why its so slow and your get the error of low virtual memory as its swoping out to disk all the time. You need ideally 2 gig of ram. I have an old pc with the same specs and has 1 gig of ram is nippy. There may be other issues like what runs at startup but more ram is you first thing to get and its not dear now

I have used it for years and no problems you can normally get the older version FREE on their site or on computer mags cd's

The hard drive is corrupt so Linux carnt mount it. It probably wont be seen if you connect it to another pc. You need a xp boot disk. Boot from the disk and goto command prompt then type fixboot c: then fixmbr \Device\HardDisk0 then chkdsk c: / p You may have to reboot back into the dos window off the cd between commands. When you have run them all try booting as normal if that fail boot from the lunux cd and see if that works