Guest barnegatdx Posted June 22, 2008 Posted June 22, 2008 tried to install XP SP3 last night, after jumping through hoops it indicated it had failed to install. System information says I have SP2 Windows update says I should install SP3 but it's "O" Bytes in size 1:) how do I check the error log on SP3 install, and go on from there ? 2:) ? Thanks BarnegatDx
Guest barnegatdx Posted June 22, 2008 Posted June 22, 2008 Re: SP3 Fails to install FATAL: UH: 0x8024200b: Re: SP3 Fails to install FATAL: UH: 0x8024200b: ERROR LOG FROM SP3 Update Failure REPORT EVENT: {0DD97AF0-0BF0-4584-909B-E0A6 6B58E067} 2008-06-22 01:19:23:437-0400 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Software Synchronization Windows Update Client successfully detected 0 updates. 2008-06-22 01:27:58:953 1860 328 Handler Install completed with 0x80070005. 2008-06-22 01:27:58:968 1860 be8 Handler FATAL: UH: 0x80070005: InstallOrUninstallThread failed in CUHWindowsPatchHandler::HandleSingleUpdate 2008-06-22 01:27:58:968 1860 be8 Handler : WARNING: Install completed: result type = 0x0, installer error = True, error = 0x80070005, disabled until reboot = Yes, reboot required = No 2008-06-22 01:27:58:968 1860 be8 Handler FATAL: UH: 0x8024200b: HandleSingleUpdate failed in CUHWindowsPatchHandler::HandleMultipleUpdates 2008-06-22 01:27:58:968 1860 be8 Handler ::::::::: 2008-06-22 01:27:58:968 1860 be8 Handler :: END :: Handler: Windows Patch Install 2008-06-22 01:27:58:968 1860 be8 Handler ::::::::::::: 2008-06-22 01:28:00:453 1372 748 Agent ********* 2008-06-22 01:28:00:453 1372 748 Agent ** END ** Agent: Installing updates [CallerId = WindowsUpdate] 2008-06-22 01:28:00:453 1372 748 Agent ************* 2008-06-22 01:28:00:453 1372 36c AU AU setting pending client directive to 'Reboot Pending' 2008-06-22 01:28:00:468 2868 db4 COMAPI >>-- RESUMED -- COMAPI: Install [ClientId = WindowsUpdate] 2008-06-22 01:28:00:468 1372 36c AU Triggering Offline detection (non- interactive) 2008-06-22 01:28:00:468 2868 db4 COMAPI - Install call complete (succeeded = 0, succeeded with errors = 0, failed = 1, unaccounted = 0) 2008-06-22 01:28:00:468 2868 db4 COMAPI - Reboot required = Yes 2008-06-22 01:28:00:468 2868 db4 COMAPI - WARNING: Exit code = 0x00000000; Call error code = 0x80240022 2008-06-22 01:28:00:468 2868 db4 COMAPI --------- 2008-06-22 01:28:00:468 2868 db4 COMAPI -- END -- COMAPI: Install [ClientId = WindowsUpdate] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - Any ideas out there as how to proceed . .? On Jun 22, 8:14 am, barnegatdx <barnega...@aol.com> wrote: > tried to install XP SP3 last night, > > after jumping through hoops it indicated it had failed to install. > > System information says I have SP2 > > Windows update says I should install SP3 but it's "O" Bytes in size > > 1:) how do I check the error log on SP3 install, and go on from > there ? > > 2:) ? > > Thanks > > BarnegatD
Guest Still learning Posted June 22, 2008 Posted June 22, 2008 Re: SP3 Fails to install FATAL: UH: 0x8024200b: Re: SP3 Fails to install FATAL: UH: 0x8024200b: I couldn't download from WU, but I did get it from here: http://www.soft32.com/download_123572.html
Guest barnegatdx Posted June 22, 2008 Posted June 22, 2008 Re: SP3 Fails to install FATAL: UH: 0x8024200b: Re: SP3 Fails to install FATAL: UH: 0x8024200b: Well, I put my XP through a series of tests: Notepad - OK 3 types Browsers - OK AOL - OK Folding At Home - OK MS Word - OK Performance test 6.1 - OK CPU & memory tests - OK Probably something broken in there, but will wait a few months to try it again Nice day outside, will take a walk . . :)
Guest Bob Harris Posted June 22, 2008 Posted June 22, 2008 Re: SP3 Fails to install FATAL: UH: 0x8024200b: Re: SP3 Fails to install FATAL: UH: 0x8024200b: That is NOT the final SP3. Get the latest directly from Microsoft. It is also available as a CD ISO image, in addition to the automatic updates. Using the CD image will help eliminate some problems that might occur during the automatic update process. http://www.microsoft.com/downloads/details.aspx?FamilyID=2fcde6ce-b5fb-4488-8c50-fe22559d164e&displaylang=en "Still learning" <notrealaddy@rukidding.com> wrote in message news:OyYoycG1IHA.3680@TK2MSFTNGP05.phx.gbl... >I couldn't download from WU, but I did get it from here: > > http://www.soft32.com/download_123572.html >
Guest Bob Harris Posted June 22, 2008 Posted June 22, 2008 Re: SP3 Fails to install FATAL: UH: 0x8024200b: Re: SP3 Fails to install FATAL: UH: 0x8024200b: A few follow-up notes: 1. The ISO image is 544 Meg. It downloaded for me in about 13 minutes on a cable modem. 2. To get the image onto a CD, do NOT copy&paste or drag&drop or similar. Use software that supports burn-from-image. Both Nero and Easy CD Creator can do this. 3. Before installing, run CHKDSK /F on C: and reboot the PC. Wait until all disk activity has stopped, possibly as much as a minute after you see the XP logo. Turn off all user programs, turn off antivirus, turn off GOBACK (if you have it). Be sure that you have at least 1 Gig of free space on C:; you won't need all of that, but better to have some extra room than not enough. 4. Install SP3. Reboot. Then, run XP update to get post-SP3 patches. 5. Rerun CHKDSK /F on C: and reboot. 6. Run defrag. 7. Share the SP3 CD with friends. That will save them from having to download and burn it. After all, it is offered free to anyone who wants it. "Still learning" <notrealaddy@rukidding.com> wrote in message news:OyYoycG1IHA.3680@TK2MSFTNGP05.phx.gbl... >I couldn't download from WU, but I did get it from here: > > http://www.soft32.com/download_123572.html >
Guest barnegatdx Posted June 22, 2008 Posted June 22, 2008 Re: SP3 Fails to install FATAL: UH: 0x8024200b: Re: SP3 Fails to install FATAL: UH: 0x8024200b: On Jun 22, 10:34 am, "Bob Harris" <rharris270[sPAM]@hotmail.com> wrote: > A few follow-up notes: > > 1. The ISO image is 544 Meg. It downloaded for me in about 13 minutes on a > cable modem. > > 2. To get the image onto a CD, do NOT copy&paste or drag&drop or similar. > Use software that supports burn-from-image. Both Nero and Easy CD Creator > can do this. > > 3. Before installing, run CHKDSK /F on C: and reboot the PC. Wait until > all disk activity has stopped, possibly as much as a minute after you see > the XP logo. Turn off all user programs, turn off antivirus, turn off > GOBACK (if you have it). Be sure that you have at least 1 Gig of free space > on C:; you won't need all of that, but better to have some extra room than > not enough. > > 4. Install SP3. Reboot. Then, run XP update to get post-SP3 patches. > > 5. Rerun CHKDSK /F on C: and reboot. > > 6. Run defrag. > > 7. Share the SP3 CD with friends. That will save them from having to > download and burn it. After all, it is offered free to anyone who wants it. > May do that ( get the CD) thanks!
Guest PA Bear [MS MVP] Posted June 22, 2008 Posted June 22, 2008 Re: SP3 Fails to install FATAL: UH: 0x8024200b: Re: SP3 Fails to install FATAL: UH: 0x8024200b: [Crossposted to WU newsgroup] Error message when you try to install Windows XP Service Pack 3: "Access is denied" or "Service Pack installation did not complete" http://support.microsoft.com/kb/949377 ======================== WinXP SP3 - Read all prerequisites for a successful installation http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/windows-xp-sp3-read-all-prerequisites-for-a-successful-installation.aspx Steps to take before you install WinXP SP3 http://support.microsoft.com/kb/950717 ======================== Free unlimited installation and compatibility support is available for Windows XP, but only for Service Pack 3 (SP3), until 14 Apr-09. Chat and e-mail support is available only in the United States and Canada. .. US: http://support.microsoft.com/oas/default.aspx?ln=en-us&prid=11273&gprid=522131 .. CA: http://support.microsoft.com/oas/default.aspx?ln=en-ca&prid=11273&gprid=522131 .. UK: http://support.microsoft.com/oas/default.aspx?ln=en-gb&prid=11273&gprid=522131 .. AU: http://support.microsoft.com/oas/default.aspx?ln=en-au&prid=11273&gprid=522131 .. Other: http://support.microsoft.com/oas/default.aspx?gprid=1173 | select Windows XP | select Windows XP Service Pack 3 -- ~Robear Dyer (PA Bear) MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002 AumHa VSOP & Admin http://aumha.net DTS-L http://dts-l.net/ barnegatdx wrote: > ERROR LOG FROM SP3 Update Failure > > > REPORT EVENT: {0DD97AF0-0BF0-4584-909B-E0A6 > 6B58E067} 2008-06-22 01:19:23:437-0400 1 147 101 > {00000000-0000-0000-0000-000000000000} 0 0 > > AutomaticUpdates Success Software Synchronization > Windows Update Client successfully detected 0 updates. > > 2008-06-22 01:27:58:953 1860 328 Handler Install completed with > 0x80070005. > > 2008-06-22 01:27:58:968 1860 be8 Handler FATAL: UH: 0x80070005: > InstallOrUninstallThread failed in > CUHWindowsPatchHandler::HandleSingleUpdate > 2008-06-22 01:27:58:968 1860 be8 Handler : WARNING: Install > completed: result type = 0x0, installer error = True, error = > 0x80070005, disabled until reboot = Yes, reboot required = No > 2008-06-22 01:27:58:968 1860 be8 Handler FATAL: UH: 0x8024200b: > HandleSingleUpdate failed in > CUHWindowsPatchHandler::HandleMultipleUpdates > 2008-06-22 01:27:58:968 1860 be8 Handler ::::::::: > 2008-06-22 01:27:58:968 1860 be8 Handler :: END :: Handler: Windows > Patch Install > 2008-06-22 01:27:58:968 1860 be8 Handler ::::::::::::: > 2008-06-22 01:28:00:453 1372 748 Agent ********* > 2008-06-22 01:28:00:453 1372 748 Agent ** END ** Agent: Installing > updates [CallerId = WindowsUpdate] > 2008-06-22 01:28:00:453 1372 748 Agent ************* > 2008-06-22 01:28:00:453 1372 36c AU AU setting pending client > directive to 'Reboot Pending' > 2008-06-22 01:28:00:468 2868 db4 COMAPI >>-- RESUMED -- COMAPI: > Install [ClientId = WindowsUpdate] > 2008-06-22 01:28:00:468 1372 36c AU Triggering Offline detection (non- > interactive) > 2008-06-22 01:28:00:468 2868 db4 COMAPI - Install call complete > (succeeded = 0, succeeded with errors = 0, failed = 1, unaccounted = > 0) > 2008-06-22 01:28:00:468 2868 db4 COMAPI - Reboot required = Yes > 2008-06-22 01:28:00:468 2868 db4 COMAPI - WARNING: Exit code = > 0x00000000; Call error code = 0x80240022 > 2008-06-22 01:28:00:468 2868 db4 COMAPI --------- > 2008-06-22 01:28:00:468 2868 db4 COMAPI -- END -- COMAPI: Install > [ClientId = WindowsUpdate] > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > - Any ideas out there as how to proceed . .? > > > > > > > On Jun 22, 8:14 am, barnegatdx <barnega...@aol.com> wrote: >> tried to install XP SP3 last night, >> >> after jumping through hoops it indicated it had failed to install. >> >> System information says I have SP2 >> >> Windows update says I should install SP3 but it's "O" Bytes in size >> >> 1:) how do I check the error log on SP3 install, and go on from >> there ? >> >> 2:) ? >> >> Thanks >> >> BarnegatD
Guest Thee Chicago Wolf Posted June 22, 2008 Posted June 22, 2008 Re: SP3 Fails to install >tried to install XP SP3 last night, > > after jumping through hoops it indicated it had failed to install. > >System information says I have SP2 > >Windows update says I should install SP3 but it's "O" Bytes in size > > 1:) how do I check the error log on SP3 install, and go on from >there ? > >2:) ? > > Thanks > >BarnegatDx Did you read the following KB article for tips? http://support.microsoft.com/kb/949377 - Thee Chicago Wolf
Guest Plato Posted June 24, 2008 Posted June 24, 2008 Re: SP3 Fails to install barnegatdx wrote: > > tried to install XP SP3 last night, Why do you need to upgrade to XP3? -- http://www.bootdisk.com/
Recommended Posts