Guest Jason James Posted June 24, 2008 Posted June 24, 2008 Howdy I found an office supply place who also sold printers/scanner/copiers (allin one). They had spec sheets in frames for each, and I found more than one which could run on win98SE,..no earlier tho. Went to a larger electronics place which sold printers etc and selected an end of run Epsom CX5500 (2007 model). I set it up and tried the next USB port and error message "cant communicate with USBPRNT1). Checked Epsoms copy function and all OK. The thing appears to be working. Tried removing the new KB. reinstate the old one with the 1/4" circle plug/ This left the 2 USBs unused. Plugged Epsom into USB-1 reran the install CD, all OK, but when tried to print it still cant communicate with USB port. Appreciate any ideas on this,....Jason
Guest MEB Posted June 24, 2008 Posted June 24, 2008 Re: Can't take a trick:Epsom CX5500 with win98SE Need specs for computer - make and model You might try this: Make sure the device is NOT connected when installing the software, wait until it prompts you or restarts. Since you have already installed the device, remove and uninstall, and retry using this suggestion. Printer OPERATING SYSTEMS PRINTER DRIVERS Win 98SE/Me/2000/XP/XP x64/Vista, Mac OS 10.2.8 or later with USB / OS 10.5 Bundle available on CD INTERFACE INTERFACE USB 1.1 - Compatible with the USB 2.0 Specification Drivers/Software http://tech.epson.co.nz/downloads/product.asp?sCategory=Multi_Functional&id=styluscx5500&FileType=1&EmailAdd=&MetricIDReturned=124875&platform=w98 -- MEB http://peoplescounsel.orgfree.com -- _________ "Jason James" <at@peace.com> wrote in message news:486062af$0$96064$c30e37c6@pit-reader.telstra.net... | Howdy | | I found an office supply place who also sold printers/scanner/copiers | (allin one). They had spec sheets in frames for each, and I found more than | one which could run on win98SE,..no earlier tho. | | Went to a larger electronics place which sold printers etc and selected an | end of run Epsom CX5500 (2007 model). | | I set it up and tried the next USB port and error message "cant communicate | with USBPRNT1). Checked Epsoms copy function and all OK. The thing appears | to be working. | | Tried removing the new KB. reinstate the old one with the 1/4" circle plug/ | This left the 2 USBs unused. Plugged Epsom into USB-1 reran the install CD, | all OK, but when tried to print it still cant communicate with USB port. | Appreciate any ideas on this,....Jason | |
Guest Franc Zabkar Posted June 24, 2008 Posted June 24, 2008 Re: Can't take a trick:Epsom CX5500 with win98SE On Tue, 24 Jun 2008 12:59:18 +1000, "Jason James" <at@peace.com> put finger to keyboard and composed: >Howdy > > I found an office supply place who also sold printers/scanner/copiers >(allin one). They had spec sheets in frames for each, and I found more than >one which could run on win98SE,..no earlier tho. > >Went to a larger electronics place which sold printers etc and selected an >end of run Epsom CX5500 (2007 model). > >I set it up and tried the next USB port and error message "cant communicate >with USBPRNT1). Checked Epsoms copy function and all OK. The thing appears >to be working. > >Tried removing the new KB. reinstate the old one with the 1/4" circle plug/ >This left the 2 USBs unused. Plugged Epsom into USB-1 reran the install CD, >all OK, but when tried to print it still cant communicate with USB port. >Appreciate any ideas on this,....Jason Try one or other of the following USB device information utilities: http://www.users.on.net/~fzabkar/USB_IDs/UVCView.x86.exe http://www.users.on.net/~fzabkar/USB_IDs/usbview.exe Can they see your printer? - Franc Zabkar -- Please remove one 'i' from my address when replying by email.
Guest Jason James Posted June 24, 2008 Posted June 24, 2008 Re: Can't take a trick:Epsom CX5500 with win98SE "MEB" <meb@not here@hotmail.com> wrote in message news:eRw6D5b1IHA.4492@TK2MSFTNGP02.phx.gbl... > Need specs for computer - make and model > > You might try this: > Make sure the device is NOT connected when installing the software, wait > until it prompts you or restarts. > Since you have already installed the device, remove and uninstall, and > retry using this suggestion. > > Printer > OPERATING SYSTEMS > PRINTER DRIVERS Win 98SE/Me/2000/XP/XP x64/Vista, Mac OS 10.2.8 or later > with USB / OS 10.5 Bundle available on CD > > INTERFACE > INTERFACE USB 1.1 - Compatible with the USB 2.0 Specification > > Drivers/Software > http://tech.epson.co.nz/downloads/product.asp?sCategory=Multi_Functional&id=styluscx5500&FileType=1&EmailAdd=&MetricIDReturned=124875&platform=w98 > > -- > MEB > http://peoplescounsel.orgfree.com Thanx MEB. I'll get back in a day or so. Ta...Jason
Guest Jason James Posted June 24, 2008 Posted June 24, 2008 Re: Can't take a trick:Epsom CX5500 with win98SE "Franc Zabkar" <fzabkar@iinternode.on.net> wrote in message news:u701649inul53bqn1sdh6ig28rm1vjlbd1@4ax.com... > On Tue, 24 Jun 2008 12:59:18 +1000, "Jason James" <at@peace.com> put > finger to keyboard and composed: > > >Howdy > > > > I found an office supply place who also sold printers/scanner/copiers > >(allin one). They had spec sheets in frames for each, and I found more than > >one which could run on win98SE,..no earlier tho. > > > >Went to a larger electronics place which sold printers etc and selected an > >end of run Epsom CX5500 (2007 model). > > > >I set it up and tried the next USB port and error message "cant communicate > >with USBPRNT1). Checked Epsoms copy function and all OK. The thing appears > >to be working. > > > >Tried removing the new KB. reinstate the old one with the 1/4" circle plug/ > >This left the 2 USBs unused. Plugged Epsom into USB-1 reran the install CD, > >all OK, but when tried to print it still cant communicate with USB port. > >Appreciate any ideas on this,....Jason > > Try one or other of the following USB device information utilities: > http://www.users.on.net/~fzabkar/USB_IDs/UVCView.x86.exe > http://www.users.on.net/~fzabkar/USB_IDs/usbview.exe > > Can they see your printer? Thanx Franc, I'll get back to the group in a day or so,..domestic duties :-) Jason
Guest MEB Posted June 24, 2008 Posted June 24, 2008 Re: Can't take a trick:Epsom CX5500 with win98SE Catchya then... -- MEB http://peoplescounsel.orgfree.com -- _________ "Jason James" <at@peace.com> wrote in message news:486095d6$0$96056$c30e37c6@pit-reader.telstra.net... | | "MEB" <meb@not here@hotmail.com> wrote in message | news:eRw6D5b1IHA.4492@TK2MSFTNGP02.phx.gbl... | > Need specs for computer - make and model | > | > You might try this: | > Make sure the device is NOT connected when installing the software, wait | > until it prompts you or restarts. | > Since you have already installed the device, remove and uninstall, and | > retry using this suggestion. | > | > Printer | > OPERATING SYSTEMS | > PRINTER DRIVERS Win 98SE/Me/2000/XP/XP x64/Vista, Mac OS 10.2.8 or later | > with USB / OS 10.5 Bundle available on CD | > | > INTERFACE | > INTERFACE USB 1.1 - Compatible with the USB 2.0 Specification | > | > Drivers/Software | > | http://tech.epson.co.nz/downloads/product.asp?sCategory=Multi_Functional&id=styluscx5500&FileType=1&EmailAdd=&MetricIDReturned=124875&platform=w98 | > | > -- | > MEB | > http://peoplescounsel.orgfree.com | | Thanx MEB. I'll get back in a day or so. Ta...Jason | |
Guest Jason James Posted July 1, 2008 Posted July 1, 2008 Re: Can't take a trick:Epsom CX5500 with win98SE "Jason James" <at@peace.com> wrote in message news:4860961b$0$96056$c30e37c6@pit-reader.telstra.net... > > "Franc Zabkar" <fzabkar@iinternode.on.net> wrote in message > news:u701649inul53bqn1sdh6ig28rm1vjlbd1@4ax.com... > > On Tue, 24 Jun 2008 12:59:18 +1000, "Jason James" <at@peace.com> put > > finger to keyboard and composed: > > > > >Howdy > > > > > > I found an office supply place who also sold printers/scanner/copiers > > >(allin one). They had spec sheets in frames for each, and I found more > than > > >one which could run on win98SE,..no earlier tho. > > > > > >Went to a larger electronics place which sold printers etc and selected > an > > >end of run Epsom CX5500 (2007 model). > > > > > >I set it up and tried the next USB port and error message "cant > communicate > > >with USBPRNT1). Checked Epsoms copy function and all OK. The thing > appears > > >to be working. > > > > > >Tried removing the new KB. reinstate the old one with the 1/4" circle > plug/ > > >This left the 2 USBs unused. Plugged Epsom into USB-1 reran the install > CD, > > >all OK, but when tried to print it still cant communicate with USB port. > > >Appreciate any ideas on this,....Jason > > > > Try one or other of the following USB device information utilities: > > http://www.users.on.net/~fzabkar/USB_IDs/UVCView.x86.exe > > http://www.users.on.net/~fzabkar/USB_IDs/usbview.exe > > > > Can they see your printer? > > Thanx Franc, I'll get back to the group in a day or so,..domestic duties :-) Frank, I downloaded the first program (UVCView) and it worked well, It identified the USB port number one, was connected to the Epson. No further news on the printer. I tried another cable (A connector to USB), but no change. Jason
Guest Jason James Posted July 1, 2008 Posted July 1, 2008 Re: Can't take a trick:Epsom CX5500 with win98SE "Jason James" <at@peace.com> wrote in message news:486095d6$0$96056$c30e37c6@pit-reader.telstra.net... > > "MEB" <meb@not here@hotmail.com> wrote in message > news:eRw6D5b1IHA.4492@TK2MSFTNGP02.phx.gbl... > > Need specs for computer - make and model > > > > You might try this: > > Make sure the device is NOT connected when installing the software, wait > > until it prompts you or restarts. > > Since you have already installed the device, remove and uninstall, and > > retry using this suggestion. > > > > Printer > > OPERATING SYSTEMS > > PRINTER DRIVERS Win 98SE/Me/2000/XP/XP x64/Vista, Mac OS 10.2.8 or later > > with USB / OS 10.5 Bundle available on CD > > > > INTERFACE > > INTERFACE USB 1.1 - Compatible with the USB 2.0 Specification > > > > Drivers/Software MEB, what do you want me to do with the text above? tks,..Jason > http://tech.epson.co.nz/downloads/product.asp?sCategory=Multi_Functional&id=styluscx5500&FileType=1&EmailAdd=&MetricIDReturned=124875&platform=w98 > > > > -- > > MEB > > http://peoplescounsel.orgfree.com > > Thanx MEB. I'll get back in a day or so. Ta...Jason > >
Guest Franc Zabkar Posted July 1, 2008 Posted July 1, 2008 Re: Can't take a trick:Epsom CX5500 with win98SE On Wed, 2 Jul 2008 06:31:50 +1000, "Jason James" <at@peace.com> put finger to keyboard and composed: >> > Try one or other of the following USB device information utilities: >> > http://www.users.on.net/~fzabkar/USB_IDs/UVCView.x86.exe >> > http://www.users.on.net/~fzabkar/USB_IDs/usbview.exe >> > >> > Can they see your printer? >> >> Thanx Franc, I'll get back to the group in a day or so,..domestic duties >:-) > >Frank, I downloaded the first program (UVCView) and it worked well, It >identified the USB port number one, was connected to the Epson. No further >news on the printer. I tried another cable (A connector to USB), but no >change. > >Jason You've proved that the hardware is communicating OK. UVCView doesn't require any device drivers to be installed, so it looks like a software issue. I'd be trying what MEB suggested. Otherwise go to Start -> Settings -> Printers, r-click your Epson, select Properties -> Details, and look for any problems. - Franc Zabkar -- Please remove one 'i' from my address when replying by email.
Guest Jason James Posted July 1, 2008 Posted July 1, 2008 Re: Can't take a trick:Epsom CX5500 with win98SE "Franc Zabkar" <fzabkar@iinternode.on.net> wrote in message news:vf7l64ha0tggekpbovetltmf0vfjik18u3@4ax.com... > On Wed, 2 Jul 2008 06:31:50 +1000, "Jason James" <at@peace.com> put > finger to keyboard and composed: > > >> > Try one or other of the following USB device information utilities: > >> > http://www.users.on.net/~fzabkar/USB_IDs/UVCView.x86.exe > >> > http://www.users.on.net/~fzabkar/USB_IDs/usbview.exe > >> > > >> > Can they see your printer? > >> > >> Thanx Franc, I'll get back to the group in a day or so,..domestic duties > >:-) > > > >Frank, I downloaded the first program (UVCView) and it worked well, It > >identified the USB port number one, was connected to the Epson. No further > >news on the printer. I tried another cable (A connector to USB), but no > >change. > > > >Jason > > You've proved that the hardware is communicating OK. UVCView doesn't > require any device drivers to be installed, so it looks like a > software issue. I'd be trying what MEB suggested. > > Otherwise go to Start -> Settings -> Printers, r-click your Epson, > select Properties -> Details, and look for any problems. Done. The port comment indicates the Epson, but has an in brackets note saying "device is not connected". I'll mess around for a while then if nogo, I'll try MEB's suggestions, Jason
Guest MEB Posted July 1, 2008 Posted July 1, 2008 Re: Can't take a trick:Epsom CX5500 with win98SE In news:486a9427$0$48621$c30e37c6@pit-reader.telstra.net at , Jason James contemplated and posted: | "Jason James" <at@peace.com> wrote in message | news:486095d6$0$96056$c30e37c6@pit-reader.telstra.net... |> |> "MEB" <meb@not here@hotmail.com> wrote in message |> news:eRw6D5b1IHA.4492@TK2MSFTNGP02.phx.gbl... |> > Need specs for computer - make and model |> > |> > You might try this: |> > Make sure the device is NOT connected when installing the |> > software, wait until it prompts you or restarts. |> > Since you have already installed the device, remove and |> > uninstall, and retry using this suggestion. |> > |> > Printer |> > OPERATING SYSTEMS |> > PRINTER DRIVERS Win 98SE/Me/2000/XP/XP x64/Vista, Mac OS 10.2.8 or |> > later with USB / OS 10.5 Bundle available on CD |> > |> > INTERFACE |> > INTERFACE USB 1.1 - Compatible with the USB 2.0 Specification |> > |> > Drivers/Software | | MEB, what do you want me to do with the text above? | | tks,..Jason Hey you made it back,,, The indications are that you must uninstall your prior failed installation(s), cleanup *thoroughly* [check in the INF folder {likely in the INF\OTHER\*.* folder}, re-start in Safe mode and check for "ghosts" and/or old USB or driver leftovers and remove those; then install the software in Normal Mode *without* the printer connected, *until advised to connect the printer*. Doing otherwise appears to cause installation issues, likely related to Windows trying to control the USB (PnP) prior to software installation. This happens more often with Network adapters, though other USB devices may also require this installation order. Some times you may be required to uninstall the USB Hub and secondaries to clear the registry, so if there is still an issue try this using the above but with this Hub removal in the Safe Mode cleanup/check, then try the re-installation. The interface information was crutial, but it shows that regardless of the motherboard or adapter support {1.1 or 2.0} you will be able to use the printer. | |> | http://tech.epson.co.nz/downloads/product.asp?sCategory=Multi_Functional&id=styluscx5500&FileType=1&EmailAdd=&MetricIDReturned=124875&platform=w98 |> > |> > -- |> > MEB |> > http://peoplescounsel.orgfree.com |> |> Thanx MEB. I'll get back in a day or so. Ta...Jason -- MEB http://peoplescounsel.orgfree.com -- _________
Guest Jason James Posted July 2, 2008 Posted July 2, 2008 Re: Can't take a trick:Epsom CX5500 with win98SE "MEB" <meb@not here@hotmail.com> wrote in message news:%23p5ea6C3IHA.3384@TK2MSFTNGP04.phx.gbl... > In news:486a9427$0$48621$c30e37c6@pit-reader.telstra.net at , > Jason James contemplated and posted: > | "Jason James" <at@peace.com> wrote in message > | news:486095d6$0$96056$c30e37c6@pit-reader.telstra.net... > |> > |> "MEB" <meb@not here@hotmail.com> wrote in message > |> news:eRw6D5b1IHA.4492@TK2MSFTNGP02.phx.gbl... > |> > Need specs for computer - make and model > |> > > |> > You might try this: > |> > Make sure the device is NOT connected when installing the > |> > software, wait until it prompts you or restarts. > |> > Since you have already installed the device, remove and > |> > uninstall, and retry using this suggestion. > |> > > |> > Printer > |> > OPERATING SYSTEMS > |> > PRINTER DRIVERS Win 98SE/Me/2000/XP/XP x64/Vista, Mac OS 10.2.8 or > |> > later with USB / OS 10.5 Bundle available on CD > |> > > |> > INTERFACE > |> > INTERFACE USB 1.1 - Compatible with the USB 2.0 Specification > |> > > |> > Drivers/Software > | > | MEB, what do you want me to do with the text above? > | > | tks,..Jason > > Hey you made it back,,, > The indications are that you must uninstall your prior failed > installation(s), cleanup *thoroughly* [check in the INF folder {likely in > the INF\OTHER\*.* folder}, re-start in Safe mode and check for "ghosts" > and/or old USB or driver leftovers and remove those; then install the > software in Normal Mode *without* the printer connected, *until advised to > connect the printer*. Doing otherwise appears to cause installation issues, > likely related to Windows trying to control the USB (PnP) prior to software > installation. This happens more often with Network adapters, though other > USB devices may also require this installation order. > Some times you may be required to uninstall the USB Hub and secondaries to > clear the registry, so if there is still an issue try this using the above > but with this Hub removal in the Safe Mode cleanup/check, then try the > re-installation. > > The interface information was crutial, but it shows that regardless of the > motherboard or adapter support {1.1 or 2.0} you will be able to use the > printer. > > | > |> > | > http://tech.epson.co.nz/downloads/product.asp?sCategory=Multi_Functional&id=styluscx5500&FileType=1&EmailAdd=&MetricIDReturned=124875&platform=w98 Thanx, this will take sometime. Inertially afflicted as I am with anything these days There's driver files from at least one previous printer on board as well. (HP printer) Jason
Guest MEB Posted July 2, 2008 Posted July 2, 2008 Re: Can't take a trick:Epsom CX5500 with win98SE In news:486b7d63$0$48620$c30e37c6@pit-reader.telstra.net at , Jason James contemplated and posted: | "MEB" <meb@not here@hotmail.com> wrote in message | news:%23p5ea6C3IHA.3384@TK2MSFTNGP04.phx.gbl... |> In news:486a9427$0$48621$c30e37c6@pit-reader.telstra.net at , |> Jason James contemplated and posted: |> | "Jason James" <at@peace.com> wrote in message |> | news:486095d6$0$96056$c30e37c6@pit-reader.telstra.net... |> |> |> |> "MEB" <meb@not here@hotmail.com> wrote in message |> |> news:eRw6D5b1IHA.4492@TK2MSFTNGP02.phx.gbl... |> |> > Need specs for computer - make and model |> |> > |> |> > You might try this: |> |> > Make sure the device is NOT connected when installing the |> |> > software, wait until it prompts you or restarts. |> |> > Since you have already installed the device, remove and |> |> > uninstall, and retry using this suggestion. |> |> > |> |> > Printer |> |> > OPERATING SYSTEMS |> |> > PRINTER DRIVERS Win 98SE/Me/2000/XP/XP x64/Vista, Mac OS 10.2.8 |> |> > or later with USB / OS 10.5 Bundle available on CD |> |> > |> |> > INTERFACE |> |> > INTERFACE USB 1.1 - Compatible with the USB 2.0 Specification |> |> > |> |> > Drivers/Software |> | |> | MEB, what do you want me to do with the text above? |> | |> | tks,..Jason |> |> Hey you made it back,,, |> The indications are that you must uninstall your prior failed |> installation(s), cleanup *thoroughly* [check in the INF folder |> {likely in the INF\OTHER\*.* folder}, re-start in Safe mode and |> check for "ghosts" and/or old USB or driver leftovers and remove |> those; then install the software in Normal Mode *without* the |> printer connected, *until advised to connect the printer*. Doing |> otherwise appears to cause installation issues, likely related to |> Windows trying to control the USB (PnP) prior to software |> installation. This happens more often with Network adapters, though |> other USB devices may also require this installation order. Some |> times you may be required to uninstall the USB Hub and secondaries |> to clear the registry, so if there is still an issue try this using |> the above but with this Hub removal in the Safe Mode cleanup/check, |> then try the re-installation. |> |> The interface information was crutial, but it shows that regardless |> of the motherboard or adapter support {1.1 or 2.0} you will be able |> to use the printer. |> |> | |> |> |> | |> | http://tech.epson.co.nz/downloads/product.asp?sCategory=Multi_Functional&id=styluscx5500&FileType=1&EmailAdd=&MetricIDReturned=124875&platform=w98 | | | Thanx, this will take sometime. Inertially afflicted as I am with | anything these days There's driver files from at least one previous | printer on board as well. (HP printer) | | Jason Okay, as you have now indicated older files from other printers, make sure to clean them up as well. You MAY find them listed in the INF\OTHER folder as well. Any *branded* software [device specific] may need removed also. IF you have difficulties, you can try this: Open the INFs found related to these printers and failed installations in a text editor and look for the files and registry settings which were used/installed for that device. Carefully remove/move those files and registry settings [export prior to removal] to a temporary folder and watch for errors occurring. IF no errors after a few days or a week of regular usage, you can likely delete them. DO NOT remove files related to standard Windows files [like mfc**, com**, odb**, ole**, std**, sti**, etc.], other files should/must be checked by at least using Properties [or preferably File Investigator, FileAlyzer, or some other like tool] *prior* to removal and/or deletion. Any questions or doubts on whether a file or registry setting is safe to delete should be checked on the NET or in here. -- MEB http://peoplescounsel.orgfree.com -- _________
Guest Jason James Posted July 5, 2008 Posted July 5, 2008 Re: Can't take a trick:Epsom CX5500 with win98SE "MEB" <meb@not here@hotmail.com> wrote in message news:ey6hcqH3IHA.1436@TK2MSFTNGP05.phx.gbl... > In news:486b7d63$0$48620$c30e37c6@pit-reader.telstra.net at , > Jason James contemplated and posted: > | "MEB" <meb@not here@hotmail.com> wrote in message > | news:%23p5ea6C3IHA.3384@TK2MSFTNGP04.phx.gbl... > |> In news:486a9427$0$48621$c30e37c6@pit-reader.telstra.net at , > |> Jason James contemplated and posted: > |> | "Jason James" <at@peace.com> wrote in message > |> | news:486095d6$0$96056$c30e37c6@pit-reader.telstra.net... > |> |> > |> |> "MEB" <meb@not here@hotmail.com> wrote in message > |> |> news:eRw6D5b1IHA.4492@TK2MSFTNGP02.phx.gbl... > |> |> > Need specs for computer - make and model > |> |> > > |> |> > You might try this: > |> |> > Make sure the device is NOT connected when installing the > |> |> > software, wait until it prompts you or restarts. > |> |> > Since you have already installed the device, remove and > |> |> > uninstall, and retry using this suggestion. > |> |> > > |> |> > Printer > |> |> > OPERATING SYSTEMS > |> |> > PRINTER DRIVERS Win 98SE/Me/2000/XP/XP x64/Vista, Mac OS 10.2.8 > |> |> > or later with USB / OS 10.5 Bundle available on CD > |> |> > > |> |> > INTERFACE > |> |> > INTERFACE USB 1.1 - Compatible with the USB 2.0 Specification > |> |> > > |> |> > Drivers/Software > |> | > |> | MEB, what do you want me to do with the text above? > |> | > |> | tks,..Jason > |> > |> Hey you made it back,,, > |> The indications are that you must uninstall your prior failed > |> installation(s), cleanup *thoroughly* [check in the INF folder > |> {likely in the INF\OTHER\*.* folder}, re-start in Safe mode and > |> check for "ghosts" and/or old USB or driver leftovers and remove > |> those; then install the software in Normal Mode *without* the > |> printer connected, *until advised to connect the printer*. Doing > |> otherwise appears to cause installation issues, likely related to > |> Windows trying to control the USB (PnP) prior to software > |> installation. This happens more often with Network adapters, though > |> other USB devices may also require this installation order. Some > |> times you may be required to uninstall the USB Hub and secondaries > |> to clear the registry, so if there is still an issue try this using > |> the above but with this Hub removal in the Safe Mode cleanup/check, > |> then try the re-installation. > |> > |> The interface information was crutial, but it shows that regardless > |> of the motherboard or adapter support {1.1 or 2.0} you will be able > |> to use the printer. > |> > |> | > |> |> > |> | > |> > | > http://tech.epson.co.nz/downloads/product.asp?sCategory=Multi_Functional&id=styluscx5500&FileType=1&EmailAdd=&MetricIDReturned=124875&platform=w98 > | > | > | Thanx, this will take sometime. Inertially afflicted as I am with > | anything these days There's driver files from at least one previous > | printer on board as well. (HP printer) > | > | Jason > > Okay, as you have now indicated older files from other printers, make sure > to clean them up as well. You MAY find them listed in the INF\OTHER folder > as well. > Any *branded* software [device specific] may need removed also. > > IF you have difficulties, you can try this: > > Open the INFs found related to these printers and failed installations in a > text editor and look for the files and registry settings which were > used/installed for that device. Carefully remove/move those files and > registry settings [export prior to removal] to a temporary folder and watch > for errors occurring. IF no errors after a few days or a week of regular > usage, you can likely delete them. DO NOT remove files related to standard > Windows files [like mfc**, com**, odb**, ole**, std**, sti**, etc.], other > files should/must be checked by at least using Properties [or preferably > File Investigator, FileAlyzer, or some other like tool] *prior* to removal > and/or deletion. > > Any questions or doubts on whether a file or registry setting is safe to > delete should be checked on the NET or in here. > > -- > MEB > http://peoplescounsel.orgfree.com Thanx for that MEB. ATM the printer is workingm and I did do a thorough search for all named files and deleted them after checking them "property-wise" I note that even this may not be sufficient. I wait in hope the printer keeps working :-). Thanx again. Jason
Recommended Posts