Guest Euro Posted June 25, 2008 Posted June 25, 2008 Hi friends, I need to install a new server as Replica DC but on our LAN we use a Linksys Router as DNS, I mean, we don't have a DNS server under windows platform, when I execute dcpromo and select to install the new server in an existing domain it show me an error telling: Cannot consult DNS to find DC (something related to _SRV) my question... Can I install a replica DC without a DNS server? If not, Can I install DNS server first on my new server, then execute dcpromo to convert it as replica DC (with DNS server already running) ?? HB
Guest Euro Posted June 25, 2008 Posted June 25, 2008 Re: install Replica DC without DNS server Hi Mr Weber, right now we have a DC running without a DNS under windows, our Router act as DHCP and use DNS of our ISP, and now I need to install a new server as Replica DC but I found this problem (explained before) ..... "Meinolf Weber" <meiweb(nospam)@gmx.de> escribió en el mensaje news:ff16fb66a208c8caa523f54af9a4@msnews.microsoft.com... > Hello Euro, > > If you talk about a replica DC means that you have one DC running? So how > is DNS handled there? Please describe more in detail what you have. Active > directory relies on a well ggod configured DNS. > I can strongly recommend to use the windows DNS server and disable the > router dns, this will create a lot of unneeded problems. > > Best regards > > Meinolf Weber > Disclaimer: This posting is provided "AS IS" with no warranties, and > confers no rights. > ** Please do NOT email, only reply to Newsgroups > ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm > >> Hi friends, I need to install a new server as Replica DC but on our >> LAN we use a Linksys Router as DNS, I mean, we don't have a DNS server >> under windows platform, when I execute dcpromo and select to install >> the new server in an existing domain it show me an error telling: >> Cannot consult DNS to find DC (something related to _SRV) >> >> my question... >> >> Can I install a replica DC without a DNS server? >> >> If not, Can I install DNS server first on my new server, then execute >> dcpromo to convert it as replica DC (with DNS server already running) >> ?? >> >> HB >> > >
Guest Meinolf Weber Posted June 25, 2008 Posted June 25, 2008 Re: install Replica DC without DNS server Hello Euro, If you talk about a replica DC means that you have one DC running? So how is DNS handled there? Please describe more in detail what you have. Active directory relies on a well ggod configured DNS. I can strongly recommend to use the windows DNS server and disable the router dns, this will create a lot of unneeded problems. Best regards Meinolf Weber Disclaimer: This posting is provided "AS IS" with no warranties, and confers no rights. ** Please do NOT email, only reply to Newsgroups ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm > Hi friends, I need to install a new server as Replica DC but on our > LAN we use a Linksys Router as DNS, I mean, we don't have a DNS server > under windows platform, when I execute dcpromo and select to install > the new server in an existing domain it show me an error telling: > Cannot consult DNS to find DC (something related to _SRV) > > my question... > > Can I install a replica DC without a DNS server? > > If not, Can I install DNS server first on my new server, then execute > dcpromo to convert it as replica DC (with DNS server already running) > ?? > > HB >
Guest Phillip Windell Posted June 25, 2008 Posted June 25, 2008 Re: install Replica DC without DNS server "Euro" <euro@euro> wrote in message news:OTtC9ov1IHA.2208@TK2MSFTNGP04.phx.gbl... > Hi friends, I need to install a new server as Replica DC but on our LAN we > use a Linksys Router as DNS, I mean, we don't have a DNS server under > windows platform, when I execute dcpromo and select to install the new > server in an existing domain it show me an error telling: Cannot consult > DNS to find DC (something related to _SRV) > > my question... > > Can I install a replica DC without a DNS server? > > If not, Can I install DNS server first on my new server, then execute > dcpromo to convert it as replica DC (with DNS server already running) ?? 1. Stop using the DNS on the NAT Box. 2. Install DNS on the Server,...but leave it unconfigured 3. "Replica DC" to me implies that their is another DC somewhere that this one is supposed to "replicate"??? Point the TCP/IP Config DNS to the same DNS IP# that the existing Domain Controller is using. If their is no other DC then there is no "Domain",..then do Step #5 next,..and then step #4 and create a new Domain. 4. Run DC Promo to make it a Domain Controller 5. Change the TCP/IP Config DNS to point to itself 6. In the configuration of the DNS Service add the ISP's DNS to the Forwarders List. Make sure the Linksys box allows the DC to make outbound DNS queries,..by default it already should be. Now on the original Domain Controller,..you're gonna have to straighten that mess out....But if there was no other Domain Controller then you are already done and skip the rest of this post. 1. Wait till the new DC above has fully replicated and has a complete copy of AD and the Local DNS on that server has fully replicated it entries 2. Run DCPromo on the original DC to demote it to a member server. 3. Install DNS on the machine but leave it unconfigured. I am assuming it was using something else for DNS before that??? But if DNS was already installed on it and being used, *uninstall* DNS, and then reinstall it and leave it unconfigured. 4. Set the TCP/IP Config DNS to point to the other DC you built earlier 5. Run DCPromo to make it a Domain Controller. 6. Reset the TCP/IP Config DNS to point to itself, and second to the other DC. Follow this pattern on both DCs 7. In the configuration of the DNS Service add the ISP's DNS to the Forwarders List. Make sure the Linksys box allows the DC to make outbound DNS queries,..by default it already should be. 8. Manually make sure that at least one of them is a Global Catalog Server. 9. Adjust the FSMO Roles if you feel you need to. Use this article to guide you: How to view and transfer FSMO roles in the graphical user interface http://support.microsoft.com/kb/255690/en-us -- Phillip Windell http://www.wandtv.com The views expressed, are my own and not those of my employer, or Microsoft, or anyone else associated with me, including my cats. -----------------------------------------------------
Guest Meinolf Weber Posted June 25, 2008 Posted June 25, 2008 Re: install Replica DC without DNS server Hello Euro, Please post an unedited ipconfig /all from the running DC and the new machine. As i said before to prevent you for additional problems use the windows DNS server and configure a forwarder to the ISP's DNS server. Also use windows DHCP for correct updating of the DNS records from clients. Your domain will not work properly with this setup. Best regards Meinolf Weber Disclaimer: This posting is provided "AS IS" with no warranties, and confers no rights. ** Please do NOT email, only reply to Newsgroups ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm > Hi Mr Weber, right now we have a DC running without a DNS under > windows, our Router act as DHCP and use DNS of our ISP, and now I need > to install a new server as Replica DC but I found this problem > (explained before) ..... > > "Meinolf Weber" <meiweb(nospam)@gmx.de> escribió en el mensaje > news:ff16fb66a208c8caa523f54af9a4@msnews.microsoft.com... > >> Hello Euro, >> >> If you talk about a replica DC means that you have one DC running? So >> how >> is DNS handled there? Please describe more in detail what you have. >> Active >> directory relies on a well ggod configured DNS. >> I can strongly recommend to use the windows DNS server and disable >> the >> router dns, this will create a lot of unneeded problems. >> Best regards >> >> Meinolf Weber >> Disclaimer: This posting is provided "AS IS" with no warranties, and >> confers no rights. >> ** Please do NOT email, only reply to Newsgroups >> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm >>> Hi friends, I need to install a new server as Replica DC but on our >>> LAN we use a Linksys Router as DNS, I mean, we don't have a DNS >>> server under windows platform, when I execute dcpromo and select to >>> install the new server in an existing domain it show me an error >>> telling: Cannot consult DNS to find DC (something related to _SRV) >>> >>> my question... >>> >>> Can I install a replica DC without a DNS server? >>> >>> If not, Can I install DNS server first on my new server, then >>> execute dcpromo to convert it as replica DC (with DNS server already >>> running) ?? >>> >>> HB >>>
Recommended Posts