Installing a New Hard Drive

[Guest David]

I want to upgrade my default hard drive. I would like to just copy, move,

clone the harddrive then install the new larger harddrive. I do have a

cloing software GoodSync. The new larger harddrive has been formated does

anyone know of problems that I may encounter. The ideal is to copy to new

drive, remove the orginal harddrive, install new harddrive, boot and go.

[Guest JS]

Re: Installing a New Hard Drive

 

New drives like Maxtor and Western Digital (that are not OEM versions) come

with a CD that includes a drive copy/clone utility. I think this will be a

better

option than GoodSync. If you have an OEM hard drive and not a Retail package

then go to the Manufacturer's web site and download the software.

 

Also with both drives connected the new drive must have the jumper set to

'Slave'.

After you remove the old drive then the new drive's jumper must be change to

'Master'.

 

JS

 

"David" <David@discussions.microsoft.com> wrote in message

news:E443C1F6-2545-4185-AD96-3557E665F5DF@microsoft.com...

>I want to upgrade my default hard drive. I would like to just copy, move,

> clone the harddrive then install the new larger harddrive. I do have a

> cloing software GoodSync. The new larger harddrive has been formated does

> anyone know of problems that I may encounter. The ideal is to copy to new

> drive, remove the orginal harddrive, install new harddrive, boot and go.

[Guest Patrick Keenan]

Re: Installing a New Hard Drive

 

"David" <David@discussions.microsoft.com> wrote in message

news:E443C1F6-2545-4185-AD96-3557E665F5DF@microsoft.com...

>I want to upgrade my default hard drive. I would like to just copy, move,

> clone the harddrive then install the new larger harddrive. I do have a

> cloing software GoodSync. The new larger harddrive has been formated does

> anyone know of problems that I may encounter. The ideal is to copy to new

> drive, remove the orginal harddrive, install new harddrive, boot and go.

 

Your proposed procedure actually won't work, in that it will not create a

new bootable disk. GoodSync is not cloning software. Copying and

moving files will not place boot files in the locations they must occupy for

the disk to boot.

 

You need to use software that will actually clone the drive and give you a

new, bootable disk. If you don't have this now, non-OEM hard disks often

come with a utility to do this (along with a bunch of unnecessary and

expensive packaging), or you can download the utility from the disk

manufacturer. You'll likely find that this is about the same size

(100meg+) as the Acronis TrueImage free trial version.

 

If you use the Acronis TrueImage trial, run the clone process in *manual*

mode. This will allow you to specify that the entire space on the target

disk is used; automatic mode will copy the original partition size.

 

One of the fastest ways to do this task is to attach both drives to another

XP system that has enough space to install the cloning software, and then

clone the old to the new. You should be done in under half an hour.

When you install the new drive in the old system, set the jumpers (if any)

as they were on the old drive and do not install the old drive until after

the initial boot.

 

The existing formatting and partitioning on teh new drive is actually

irrelevant. The cloning software is going to replace it.

 

HTH

-pk

[Guest Patrick Keenan]

Re: Installing a New Hard Drive

 

"JS" <@> wrote in message news:ef7%2344R3IHA.4988@TK2MSFTNGP04.phx.gbl...

> New drives like Maxtor and Western Digital (that are not OEM versions)

> come

> with a CD that includes a drive copy/clone utility. I think this will be a

> better

> option than GoodSync.

 

That's definitely the case, as GoodSync, while it may be a fine copying

utility, can't create a bootable disk.

 

It isn't a disk-cloning utility.

 

The OP will wind up with a non-bootable disk that has to be cloned properly.

 

-pk

> If you have an OEM hard drive and not a Retail package

> then go to the Manufacturer's web site and download the software.

>

> Also with both drives connected the new drive must have the jumper set to

> 'Slave'.

> After you remove the old drive then the new drive's jumper must be change

> to 'Master'.

>

> JS

>

> "David" <David@discussions.microsoft.com> wrote in message

> news:E443C1F6-2545-4185-AD96-3557E665F5DF@microsoft.com...

>>I want to upgrade my default hard drive. I would like to just copy, move,

>> clone the harddrive then install the new larger harddrive. I do have a

>> cloing software GoodSync. The new larger harddrive has been formated

>> does

>> anyone know of problems that I may encounter. The ideal is to copy to

>> new

>> drive, remove the orginal harddrive, install new harddrive, boot and go.

>

>