Guest QuyNguyen Posted July 18, 2008 Posted July 18, 2008 Hi, My windows server 2003 controller can not browse any computer in domain or net work although it can ping to all computers in this domain and these computers can be viewed Active Directory User and Computer. When I explore the Microsoft Windows Network >Mydomain. I also see the controller itself (the one I am working on) not any computers in this domain. How can I set up to able to browse all computers in this domain. Thank you very much.
Guest Meinolf Weber Posted July 18, 2008 Posted July 18, 2008 Re: Can not browse any computer in domain Hello QuyNguyen, Enable NetBIOS over TCP/IP on the clients: network properties>TCP/IP>advanced>WINS>enable netbios over TCP If this not help install a WINS server, especially if you have more then one subnet. Best regards Meinolf Weber Disclaimer: This posting is provided "AS IS" with no warranties, and confers no rights. ** Please do NOT email, only reply to Newsgroups ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm > Hi, > My windows server 2003 controller can not browse any computer in > domain or > net work although it can ping to all computers in this domain and > these > computers can be viewed Active Directory User and Computer. When I > explore > the Microsoft Windows Network >Mydomain. I also see the controller > itself > (the one I am working on) not any computers in this domain. How can I > set up > to able to browse all computers in this domain. > Thank you very much.
Guest QuyNguyen Posted July 18, 2008 Posted July 18, 2008 Re: Can not browse any computer in domain I did install Winserver for controller also enable netbios over TCP but still is the same. "Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message news:ff16fb66a416e8cab75278b4eb29@msnews.microsoft.com... > Hello QuyNguyen, > > Enable NetBIOS over TCP/IP on the clients: > > network properties>TCP/IP>advanced>WINS>enable netbios over TCP > > If this not help install a WINS server, especially if you have more then > one subnet. > > Best regards > > Meinolf Weber > Disclaimer: This posting is provided "AS IS" with no warranties, and > confers no rights. > ** Please do NOT email, only reply to Newsgroups > ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm > >> Hi, >> My windows server 2003 controller can not browse any computer in >> domain or >> net work although it can ping to all computers in this domain and >> these >> computers can be viewed Active Directory User and Computer. When I >> explore >> the Microsoft Windows Network >Mydomain. I also see the controller >> itself >> (the one I am working on) not any computers in this domain. How can I >> set up >> to able to browse all computers in this domain. >> Thank you very much. > >
Guest Ace Fekay [MVP] Posted July 19, 2008 Posted July 19, 2008 Re: Can not browse any computer in domain In news:O3VpI7S6IHA.3696@TK2MSFTNGP04.phx.gbl, QuyNguyen <quy.nguyen@ignify.com> typed: > I did install Winserver for controller also enable netbios over TCP > but still is the same. Please post all Event log errors on the DCs. Post the EventID# and Source names. If there are any on the clients, post them too. Also, please post an unedited ipconfig /all from a DC and of a client. This will help us understand your infrastructure and configuration to get a better idea if there is an error. Also, is NetBIOS enabled on all DCs and clients? -- Regards, Ace This posting is provided "AS-IS" with no warranties or guarantees and confers no rights. Ace Fekay, MCSE 2003 & 2000, MCSA 2003 & 2000, MCSE+I, MCT, MVP Microsoft MVP - Directory Services Microsoft Certified Trainer For urgent issues, you may want to contact Microsoft PSS directly. Please check http://support.microsoft.com for regional support phone numbers. Infinite Diversities in Infinite Combinations
Recommended Posts