Guest Saurabh Posted July 30, 2008 Posted July 30, 2008 Greetings!!! I had a problem with my dvd writer. I was not able to access. Then while googling, i found a solution that deleting few registry entries upperfilters and lowerfilters will solve the problem. but, when i delete entries and restart, my keyoard and mouse stopped working. Now finding solution for that, i found one reg file, if i will restore that, things should work proper. But, as i have login password, and my keyboard doesnt work, I am unable to login. so my question is there anyway whereby i can bypass that login screen and install that reg file. Or anyother way whereby i can restore my reg files. I dont want to re-install windows, i have 100s of softwares and many settings... looking fwd for kind help thnks & regds Saurabh
Guest Ron Badour Posted July 30, 2008 Posted July 30, 2008 Re: I want to bypass login screen When booting, tap the F8 key to get a boot menu. Try booting from last known good configuration. -- Regards Ron Badour MS MVP Windows Desktop Experience "Saurabh" <Saurabh@discussions.microsoft.com> wrote in message news:05BABDC1-F782-40B2-A041-AEC7A694855B@microsoft.com... > Greetings!!! > > I had a problem with my dvd writer. I was not able to access. Then while > googling, i found a solution that deleting few registry entries > upperfilters > and lowerfilters will solve the problem. but, when i delete entries and > restart, my keyoard and mouse stopped working. > > Now finding solution for that, i found one reg file, if i will restore > that, > things should work proper. But, as i have login password, and my keyboard > doesnt work, I am unable to login. > so my question is there anyway whereby i can bypass that login screen and > install that reg file. Or anyother way whereby i can restore my reg files. > > I dont want to re-install windows, i have 100s of softwares and many > settings... > > looking fwd for kind help > > thnks & regds > Saurabh
Guest Saurabh Posted July 30, 2008 Posted July 30, 2008 Re: I want to bypass login screen hey thnks a ton, my keyboard mouse started working... but still i m not able to see my dvd writer icon in my computer... any solution for that? thnks again.. regds - Saurabh "Ron Badour" wrote: > When booting, tap the F8 key to get a boot menu. Try booting from last > known good configuration. > > -- > Regards > > Ron Badour > MS MVP > Windows Desktop Experience > > > "Saurabh" <Saurabh@discussions.microsoft.com> wrote in message > news:05BABDC1-F782-40B2-A041-AEC7A694855B@microsoft.com... > > Greetings!!! > > > > I had a problem with my dvd writer. I was not able to access. Then while > > googling, i found a solution that deleting few registry entries > > upperfilters > > and lowerfilters will solve the problem. but, when i delete entries and > > restart, my keyoard and mouse stopped working. > > > > Now finding solution for that, i found one reg file, if i will restore > > that, > > things should work proper. But, as i have login password, and my keyboard > > doesnt work, I am unable to login. > > so my question is there anyway whereby i can bypass that login screen and > > install that reg file. Or anyother way whereby i can restore my reg files. > > > > I dont want to re-install windows, i have 100s of softwares and many > > settings... > > > > looking fwd for kind help > > > > thnks & regds > > Saurabh > > >
Guest Ron Badour Posted July 30, 2008 Posted July 30, 2008 Re: I want to bypass login screen Is this a recent hardware addition? If not, did it work at one time and quit? Is the drive recognized in the BIOS and Device Manager? If a recent addition, did you set the jumper pin(s) correctly? Are the cables tight? -- Regards Ron Badour MS MVP Windows Desktop Experience "Saurabh" <Saurabh@discussions.microsoft.com> wrote in message news:4FD2D599-96EF-49A8-8264-8B66F50976B2@microsoft.com... > hey thnks a ton, my keyboard mouse started working... > > but still i m not able to see my dvd writer icon in my computer... any > solution for that? > > thnks again.. > > regds > - Saurabh > > "Ron Badour" wrote: > >> When booting, tap the F8 key to get a boot menu. Try booting from last >> known good configuration. >> >> -- >> Regards >> >> Ron Badour >> MS MVP >> Windows Desktop Experience >> >> >> "Saurabh" <Saurabh@discussions.microsoft.com> wrote in message >> news:05BABDC1-F782-40B2-A041-AEC7A694855B@microsoft.com... >> > Greetings!!! >> > >> > I had a problem with my dvd writer. I was not able to access. Then >> > while >> > googling, i found a solution that deleting few registry entries >> > upperfilters >> > and lowerfilters will solve the problem. but, when i delete entries and >> > restart, my keyoard and mouse stopped working. >> > >> > Now finding solution for that, i found one reg file, if i will restore >> > that, >> > things should work proper. But, as i have login password, and my >> > keyboard >> > doesnt work, I am unable to login. >> > so my question is there anyway whereby i can bypass that login screen >> > and >> > install that reg file. Or anyother way whereby i can restore my reg >> > files. >> > >> > I dont want to re-install windows, i have 100s of softwares and many >> > settings... >> > >> > looking fwd for kind help >> > >> > thnks & regds >> > Saurabh >> >> >>
Guest Saurabh Posted July 30, 2008 Posted July 30, 2008 Re: I want to bypass login screen hi, the drive is working very much properly. it has detected by bios.. i can boot from cd or dvd.. means it does work. but only after booting windows it doesnt work. these problem came into picture after and when i have install roxio winon cd 6. (thats what i remember). but i have un install that software but still i cant see my drive. in device manager i can see yello ! mark.. and the error code Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19) in SCSI and RAID there is one more yellow ! mark... name is roxio and the error is the same as above. hope this will help you to solve my problem. thnks regds - Saurabh "Ron Badour" wrote: > Is this a recent hardware addition? If not, did it work at one time and > quit? Is the drive recognized in the BIOS and Device Manager? If a recent > addition, did you set the jumper pin(s) correctly? Are the cables tight? > > -- > Regards > > Ron Badour > MS MVP > Windows Desktop Experience > > > "Saurabh" <Saurabh@discussions.microsoft.com> wrote in message > news:4FD2D599-96EF-49A8-8264-8B66F50976B2@microsoft.com... > > hey thnks a ton, my keyboard mouse started working... > > > > but still i m not able to see my dvd writer icon in my computer... any > > solution for that? > > > > thnks again.. > > > > regds > > - Saurabh > > > > "Ron Badour" wrote: > > > >> When booting, tap the F8 key to get a boot menu. Try booting from last > >> known good configuration. > >> > >> -- > >> Regards > >> > >> Ron Badour > >> MS MVP > >> Windows Desktop Experience > >> > >> > >> "Saurabh" <Saurabh@discussions.microsoft.com> wrote in message > >> news:05BABDC1-F782-40B2-A041-AEC7A694855B@microsoft.com... > >> > Greetings!!! > >> > > >> > I had a problem with my dvd writer. I was not able to access. Then > >> > while > >> > googling, i found a solution that deleting few registry entries > >> > upperfilters > >> > and lowerfilters will solve the problem. but, when i delete entries and > >> > restart, my keyoard and mouse stopped working. > >> > > >> > Now finding solution for that, i found one reg file, if i will restore > >> > that, > >> > things should work proper. But, as i have login password, and my > >> > keyboard > >> > doesnt work, I am unable to login. > >> > so my question is there anyway whereby i can bypass that login screen > >> > and > >> > install that reg file. Or anyother way whereby i can restore my reg > >> > files. > >> > > >> > I dont want to re-install windows, i have 100s of softwares and many > >> > settings... > >> > > >> > looking fwd for kind help > >> > > >> > thnks & regds > >> > Saurabh > >> > >> > >> > > >
Guest Saurabh Posted July 30, 2008 Posted July 30, 2008 Re: I want to bypass login screen Hi Ron, My problem have been sorted out. I just went to regedit and delete lowerfilters and upperfilters for cd / dvd drive ... and reboot and my drives came back. thnkas a lot for your kind support. god bless you. regds - Saurabh "Saurabh" wrote: > hi, > > the drive is working very much properly. it has detected by bios.. i can > boot from cd or dvd.. means it does work. but only after booting windows it > doesnt work. > > these problem came into picture after and when i have install roxio winon cd > 6. (thats what i remember). but i have un install that software but still i > cant see my drive. > > in device manager i can see yello ! mark.. and the error code > Windows cannot start this hardware device because its configuration > information (in the registry) is incomplete or damaged. (Code 19) > > in SCSI and RAID there is one more yellow ! mark... name is roxio and the > error is the same as above. > > hope this will help you to solve my problem. > > thnks > regds > - Saurabh > > "Ron Badour" wrote: > > > Is this a recent hardware addition? If not, did it work at one time and > > quit? Is the drive recognized in the BIOS and Device Manager? If a recent > > addition, did you set the jumper pin(s) correctly? Are the cables tight? > > > > -- > > Regards > > > > Ron Badour > > MS MVP > > Windows Desktop Experience > > > > > > "Saurabh" <Saurabh@discussions.microsoft.com> wrote in message > > news:4FD2D599-96EF-49A8-8264-8B66F50976B2@microsoft.com... > > > hey thnks a ton, my keyboard mouse started working... > > > > > > but still i m not able to see my dvd writer icon in my computer... any > > > solution for that? > > > > > > thnks again.. > > > > > > regds > > > - Saurabh > > > > > > "Ron Badour" wrote: > > > > > >> When booting, tap the F8 key to get a boot menu. Try booting from last > > >> known good configuration. > > >> > > >> -- > > >> Regards > > >> > > >> Ron Badour > > >> MS MVP > > >> Windows Desktop Experience > > >> > > >> > > >> "Saurabh" <Saurabh@discussions.microsoft.com> wrote in message > > >> news:05BABDC1-F782-40B2-A041-AEC7A694855B@microsoft.com... > > >> > Greetings!!! > > >> > > > >> > I had a problem with my dvd writer. I was not able to access. Then > > >> > while > > >> > googling, i found a solution that deleting few registry entries > > >> > upperfilters > > >> > and lowerfilters will solve the problem. but, when i delete entries and > > >> > restart, my keyoard and mouse stopped working. > > >> > > > >> > Now finding solution for that, i found one reg file, if i will restore > > >> > that, > > >> > things should work proper. But, as i have login password, and my > > >> > keyboard > > >> > doesnt work, I am unable to login. > > >> > so my question is there anyway whereby i can bypass that login screen > > >> > and > > >> > install that reg file. Or anyother way whereby i can restore my reg > > >> > files. > > >> > > > >> > I dont want to re-install windows, i have 100s of softwares and many > > >> > settings... > > >> > > > >> > looking fwd for kind help > > >> > > > >> > thnks & regds > > >> > Saurabh > > >> > > >> > > >> > > > > > >
Guest Ron Badour Posted July 30, 2008 Posted July 30, 2008 Re: I want to bypass login screen Great, thanks for the feedback. -- Regards Ron Badour MS MVP Windows Desktop Experience "Saurabh" <Saurabh@discussions.microsoft.com> wrote in message news:46BF2701-EA3E-4082-BEAB-863059B831DF@microsoft.com... > Hi Ron, > > My problem have been sorted out. I just went to regedit and delete > lowerfilters and upperfilters for cd / dvd drive ... and reboot and my > drives > came back. > > thnkas a lot for your kind support. > > god bless you. > > regds > - Saurabh > > "Saurabh" wrote: > >> hi, >> >> the drive is working very much properly. it has detected by bios.. i can >> boot from cd or dvd.. means it does work. but only after booting windows >> it >> doesnt work. >> >> these problem came into picture after and when i have install roxio winon >> cd >> 6. (thats what i remember). but i have un install that software but still >> i >> cant see my drive. >> >> in device manager i can see yello ! mark.. and the error code >> Windows cannot start this hardware device because its configuration >> information (in the registry) is incomplete or damaged. (Code 19) >> >> in SCSI and RAID there is one more yellow ! mark... name is roxio and the >> error is the same as above. >> >> hope this will help you to solve my problem. >> >> thnks >> regds >> - Saurabh >> >> "Ron Badour" wrote: >> >> > Is this a recent hardware addition? If not, did it work at one time >> > and >> > quit? Is the drive recognized in the BIOS and Device Manager? If a >> > recent >> > addition, did you set the jumper pin(s) correctly? Are the cables >> > tight? >> > >> > -- >> > Regards >> > >> > Ron Badour >> > MS MVP >> > Windows Desktop Experience >> > >> > >> > "Saurabh" <Saurabh@discussions.microsoft.com> wrote in message >> > news:4FD2D599-96EF-49A8-8264-8B66F50976B2@microsoft.com... >> > > hey thnks a ton, my keyboard mouse started working... >> > > >> > > but still i m not able to see my dvd writer icon in my computer... >> > > any >> > > solution for that? >> > > >> > > thnks again.. >> > > >> > > regds >> > > - Saurabh >> > > >> > > "Ron Badour" wrote: >> > > >> > >> When booting, tap the F8 key to get a boot menu. Try booting from >> > >> last >> > >> known good configuration. >> > >> >> > >> -- >> > >> Regards >> > >> >> > >> Ron Badour >> > >> MS MVP >> > >> Windows Desktop Experience >> > >> >> > >> >> > >> "Saurabh" <Saurabh@discussions.microsoft.com> wrote in message >> > >> news:05BABDC1-F782-40B2-A041-AEC7A694855B@microsoft.com... >> > >> > Greetings!!! >> > >> > >> > >> > I had a problem with my dvd writer. I was not able to access. Then >> > >> > while >> > >> > googling, i found a solution that deleting few registry entries >> > >> > upperfilters >> > >> > and lowerfilters will solve the problem. but, when i delete >> > >> > entries and >> > >> > restart, my keyoard and mouse stopped working. >> > >> > >> > >> > Now finding solution for that, i found one reg file, if i will >> > >> > restore >> > >> > that, >> > >> > things should work proper. But, as i have login password, and my >> > >> > keyboard >> > >> > doesnt work, I am unable to login. >> > >> > so my question is there anyway whereby i can bypass that login >> > >> > screen >> > >> > and >> > >> > install that reg file. Or anyother way whereby i can restore my >> > >> > reg >> > >> > files. >> > >> > >> > >> > I dont want to re-install windows, i have 100s of softwares and >> > >> > many >> > >> > settings... >> > >> > >> > >> > looking fwd for kind help >> > >> > >> > >> > thnks & regds >> > >> > Saurabh >> > >> >> > >> >> > >> >> > >> > >> >
Recommended Posts