Guest RJK Posted August 4, 2008 Posted August 4, 2008 3 or 4 couple of weeks ago, I dug around this horrid HP J6410 XP driver to set it for A4 - to solve a problem with paper size i.e. the defaults set in it were for American "Letter" sized paper, and invoicing software print-out was out of position. To correct that, I set A4 paper size in 3 places, (in the HP driver), in "Printing Preferences" and "Properties." Yesterday, after abandoning the idea of "transplanting" an aged XP Home platform onto significantly different and newer hardware, e.g. http://www.theeldergeek.com/replace_motherboard.htm I took the "preferred," but, more time consuming, route of a fresh XP install, adn reinstalling EVERYTHING :-( After installing the HP 6410, ((always) HIDEOUS HP drivers / software IMHO), the previous "paper size" problem emerged when printing invoices. I immediately launched into a fight with that HP Printer driver, and could only find two place to set "A4," compared to a few weeks ago, when after a lot of digging and going around in circles in that damned driver, I found a "third" setting. So now when looking at that HP printer driver settings, A4 is set in two places, and there is small grey "pane" on one of the screens, (in printer driver "properties," containing the solitary word "Letter" ...for paper size. The "Advanced Options" setting is "On," which means that that an options "tree" with little drop-down menus is fully displayed but, I simply cannot find that third location, in that driver, for that "third" setting ! (the owner has only very recently bought that HP J6410) .....any tips hugely appreciated. regards, Richard
Recommended Posts