Guest A.Sabry Posted August 7, 2008 Posted August 7, 2008 Hello every body i need a quick Help Pls. i've one VPN user account, for some reason it should be used on more than one machine on the SAME site. when connecting to the remote VPN server,1 user connec successfully and the reamining ones didn't. Some help or any redirection will be greatly apperciated. nb: of course i enabled multilink, because if i use SAME Account from different ISP sites, every one connects normally. lets say i have 10 remote sites all are connecting to my VPN Server, using same user account will allow them to connect without problems, but if they are located same site they don't ALL connect, Just one does
Guest Phillip Windell Posted August 7, 2008 Posted August 7, 2008 Re: Multiple VPN Connection The problem is the Firewall at the site the VPN User are calling "from". Their firewall is unable to properly separate the traffic using the Client Source Port or other means to distinguish the Session. -- Phillip Windell http://www.wandtv.com The views expressed, are my own and not those of my employer, or Microsoft, or anyone else associated with me, including my cats. ----------------------------------------------------- "A.Sabry" <sdf@edf.dc> wrote in message news:OJ97NpL%23IHA.4772@TK2MSFTNGP06.phx.gbl... > Hello every body > i need a quick Help Pls. > i've one VPN user account, for some reason it should be used on more than > one machine on the SAME site. > when connecting to the remote VPN server,1 user connec successfully and > the reamining ones didn't. > Some help or any redirection will be greatly apperciated. > nb: of course i enabled multilink, because if i use SAME Account from > different ISP sites, every one connects normally. > lets say i have 10 remote sites all are connecting to my VPN Server, using > same user account will allow them to connect without problems, but if they > are located same site they don't ALL connect, Just one does
Guest Bill Grant Posted August 8, 2008 Posted August 8, 2008 Re: Multiple VPN Connection Also some SOHO DSL "routers" will only allow one VPN connection through. "Phillip Windell" <philwindell@hotmail.com> wrote in message news:#aTNICM#IHA.5040@TK2MSFTNGP04.phx.gbl... > The problem is the Firewall at the site the VPN User are calling "from". > Their firewall is unable to properly separate the traffic using the Client > Source Port or other means to distinguish the Session. > > > -- > Phillip Windell > http://www.wandtv.com > > The views expressed, are my own and not those of my employer, or > Microsoft, > or anyone else associated with me, including my cats. > ----------------------------------------------------- > > > "A.Sabry" <sdf@edf.dc> wrote in message > news:OJ97NpL%23IHA.4772@TK2MSFTNGP06.phx.gbl... >> Hello every body >> i need a quick Help Pls. >> i've one VPN user account, for some reason it should be used on more than >> one machine on the SAME site. >> when connecting to the remote VPN server,1 user connec successfully and >> the reamining ones didn't. >> Some help or any redirection will be greatly apperciated. >> nb: of course i enabled multilink, because if i use SAME Account from >> different ISP sites, every one connects normally. >> lets say i have 10 remote sites all are connecting to my VPN Server, >> using same user account will allow them to connect without problems, but >> if they are located same site they don't ALL connect, Just one does > >
Guest Phillip Windell Posted August 8, 2008 Posted August 8, 2008 Re: Multiple VPN Connection Yea, I thought of that after I posted but was too lazy to go back an add to it :-} One little Watchgaurd box (around $500.00) I put in for someone would only allow one if you did not pay extra to get the Key to add into the box the "enable" more. -- Phillip Windell http://www.wandtv.com The views expressed, are my own and not those of my employer, or Microsoft, or anyone else associated with me, including my cats. ----------------------------------------------------- "Bill Grant" <not.available@online> wrote in message news:%23pMO8YP%23IHA.528@TK2MSFTNGP06.phx.gbl... > Also some SOHO DSL "routers" will only allow one VPN connection through. > > "Phillip Windell" <philwindell@hotmail.com> wrote in message > news:#aTNICM#IHA.5040@TK2MSFTNGP04.phx.gbl... >> The problem is the Firewall at the site the VPN User are calling "from". >> Their firewall is unable to properly separate the traffic using the >> Client Source Port or other means to distinguish the Session. >> >> >> -- >> Phillip Windell >> http://www.wandtv.com >> >> The views expressed, are my own and not those of my employer, or >> Microsoft, >> or anyone else associated with me, including my cats. >> ----------------------------------------------------- >> >> >> "A.Sabry" <sdf@edf.dc> wrote in message >> news:OJ97NpL%23IHA.4772@TK2MSFTNGP06.phx.gbl... >>> Hello every body >>> i need a quick Help Pls. >>> i've one VPN user account, for some reason it should be used on more >>> than one machine on the SAME site. >>> when connecting to the remote VPN server,1 user connec successfully and >>> the reamining ones didn't. >>> Some help or any redirection will be greatly apperciated. >>> nb: of course i enabled multilink, because if i use SAME Account from >>> different ISP sites, every one connects normally. >>> lets say i have 10 remote sites all are connecting to my VPN Server, >>> using same user account will allow them to connect without problems, but >>> if they are located same site they don't ALL connect, Just one does >> >>
Guest A.Sabry Posted August 9, 2008 Posted August 9, 2008 Re: Multiple VPN Connection Thank you. But no turn around about this problem ? Ahmad "Phillip Windell" <philwindell@hotmail.com> wrote in message news:eu$VjSW%23IHA.5040@TK2MSFTNGP04.phx.gbl... > Yea, I thought of that after I posted but was too lazy to go back an add > to it :-} > One little Watchgaurd box (around $500.00) I put in for someone would only > allow one if you did not pay extra to get the Key to add into the box the > "enable" more. > > -- > Phillip Windell > http://www.wandtv.com > > The views expressed, are my own and not those of my employer, or > Microsoft, > or anyone else associated with me, including my cats. > ----------------------------------------------------- > > "Bill Grant" <not.available@online> wrote in message > news:%23pMO8YP%23IHA.528@TK2MSFTNGP06.phx.gbl... >> Also some SOHO DSL "routers" will only allow one VPN connection >> through. >> >> "Phillip Windell" <philwindell@hotmail.com> wrote in message >> news:#aTNICM#IHA.5040@TK2MSFTNGP04.phx.gbl... >>> The problem is the Firewall at the site the VPN User are calling "from". >>> Their firewall is unable to properly separate the traffic using the >>> Client Source Port or other means to distinguish the Session. >>> >>> >>> -- >>> Phillip Windell >>> http://www.wandtv.com >>> >>> The views expressed, are my own and not those of my employer, or >>> Microsoft, >>> or anyone else associated with me, including my cats. >>> ----------------------------------------------------- >>> >>> >>> "A.Sabry" <sdf@edf.dc> wrote in message >>> news:OJ97NpL%23IHA.4772@TK2MSFTNGP06.phx.gbl... >>>> Hello every body >>>> i need a quick Help Pls. >>>> i've one VPN user account, for some reason it should be used on more >>>> than one machine on the SAME site. >>>> when connecting to the remote VPN server,1 user connec successfully and >>>> the reamining ones didn't. >>>> Some help or any redirection will be greatly apperciated. >>>> nb: of course i enabled multilink, because if i use SAME Account from >>>> different ISP sites, every one connects normally. >>>> lets say i have 10 remote sites all are connecting to my VPN Server, >>>> using same user account will allow them to connect without problems, >>>> but if they are located same site they don't ALL connect, Just one does >>> >>> > >
Guest Phillip Windell Posted August 11, 2008 Posted August 11, 2008 Re: Multiple VPN Connection What's "turn around"? You have to solve the problem, not us. We can only give suggestions as to why it is happening. -- Phillip Windell http://www.wandtv.com The views expressed, are my own and not those of my employer, or Microsoft, or anyone else associated with me, including my cats. ----------------------------------------------------- "A.Sabry" <sdf@edf.dc> wrote in message news:u$c8D2e%23IHA.5192@TK2MSFTNGP04.phx.gbl... > Thank you. > But no turn around about this problem ? > Ahmad > > "Phillip Windell" <philwindell@hotmail.com> wrote in message > news:eu$VjSW%23IHA.5040@TK2MSFTNGP04.phx.gbl... >> Yea, I thought of that after I posted but was too lazy to go back an add >> to it :-} >> One little Watchgaurd box (around $500.00) I put in for someone would >> only allow one if you did not pay extra to get the Key to add into the >> box the "enable" more. >> >> -- >> Phillip Windell >> http://www.wandtv.com >> >> The views expressed, are my own and not those of my employer, or >> Microsoft, >> or anyone else associated with me, including my cats. >> ----------------------------------------------------- >> >> "Bill Grant" <not.available@online> wrote in message >> news:%23pMO8YP%23IHA.528@TK2MSFTNGP06.phx.gbl... >>> Also some SOHO DSL "routers" will only allow one VPN connection >>> through. >>> >>> "Phillip Windell" <philwindell@hotmail.com> wrote in message >>> news:#aTNICM#IHA.5040@TK2MSFTNGP04.phx.gbl... >>>> The problem is the Firewall at the site the VPN User are calling >>>> "from". Their firewall is unable to properly separate the traffic using >>>> the Client Source Port or other means to distinguish the Session. >>>> >>>> >>>> -- >>>> Phillip Windell >>>> http://www.wandtv.com >>>> >>>> The views expressed, are my own and not those of my employer, or >>>> Microsoft, >>>> or anyone else associated with me, including my cats. >>>> ----------------------------------------------------- >>>> >>>> >>>> "A.Sabry" <sdf@edf.dc> wrote in message >>>> news:OJ97NpL%23IHA.4772@TK2MSFTNGP06.phx.gbl... >>>>> Hello every body >>>>> i need a quick Help Pls. >>>>> i've one VPN user account, for some reason it should be used on more >>>>> than one machine on the SAME site. >>>>> when connecting to the remote VPN server,1 user connec successfully >>>>> and the reamining ones didn't. >>>>> Some help or any redirection will be greatly apperciated. >>>>> nb: of course i enabled multilink, because if i use SAME Account from >>>>> different ISP sites, every one connects normally. >>>>> lets say i have 10 remote sites all are connecting to my VPN Server, >>>>> using same user account will allow them to connect without problems, >>>>> but if they are located same site they don't ALL connect, Just one >>>>> does >>>> >>>> >> >> >
Recommended Posts