Guest thanatoid Posted August 30, 2008 Posted August 30, 2008 Hi gang, I want to connect a Belkin 2xUSB port "card" to my PCChips M572 motherboard. The motherboard has a twin USB connector which has 2 rows of 9 pins, with one of the 18 pins missing. I have the manual, and the first two pins, facing back of computer, are marked 1 and 2. On the motherboard, /of course/, they're marked 2 and 1. But I don't think it matters, since I am pretty sure both rows are the same. The one "blank" pin is irrelevant, since it is where the S-Gnd connects, which I believe doesn't matter since 3 of the 4 configs in the Belkin manual do not even use that 5th pin. The Belkin card has 2 5-pin connectors and a very comprehensive installation guide, however, seeing as I have 17 pins to work with of the MB and only 5 pins to work with on each of the 2 cables, I would /prefer/ to connect them the right way, if you know what I mean. It's late. I just spent about 2 hours searching for a diagram of the damn 17(18) pin MB USB connector, no luck. Anyway, I have the diagram, and the connector, just not sure which pin is the first one. One would think 1 for the first cable, and 2 for the second cable, but WHY are there 7 more pins?????? If necessary, I can post pix of the 19-pin MB connector and the 5-pin USB cable connectors to some binary group. P.S. I just added a 128 MB SDRAM stick, so I now have 192 MB of RAM. Things are /really/ moving over here! Several attempts at putting in 333 and 350 AMD K-6 CPU's have failed but I know someone who has an Intel 266MHz which I know the MB will accept, I just have to make HIM upgrade. HE runs XP on that 266MHz HP behemoth with just 256MB of RAM, I'll never understand how or why! I have been trying for a few weeks now to get him to give me the model number of his HP computer which /he claims/ will not take more than 256 MB of RAM - I don't believe this, so I want to find out how much RAM it will take, and also how fast a CPU it will accept. They give those old CPU's away for free. Then I can get his 266 - not that it's going to be much of a change from the 166, still... The little store I went to had a box of about 80 CPU's ranging from 386's to 2.5GHz Celerons, but of course nothing between 166MHz - which I have - and 333MHz - which is 33 MHz too fast for my MB to accept. Sigh. Also, regardless of the CPU situation, I am thinking of putting 98SE on this machine, to replace the Win95B (sob !!!!) And if I can get 98 and USB to work, then my ISP can give me a 2wire DSL box to connect via USB (I suppose I could get a LAN card for 5 bucks if it doesn't work) for LESS than my current dial-up connection. Weird, huh? I don't know WHAT is going on here anymore. I also want to read my email faster. (HAAAR!) Sorry. A little wired. Just had a cream soda. -- [from a recent conversation] thanatoid: So why did you decide you needed broadband? Neighbor: I wanted to read my e-mail faster.
Guest thanatoid Posted August 30, 2008 Posted August 30, 2008 Re: The mystery of the PCChips M572 motherboard connector for add-on USB "card" Re: The mystery of the PCChips M572 motherboard connector for add-on USB "card" thanatoid <waiting@the.exit.invalid> wrote in news:Xns9B0A2749F2CBDthanexit@66.250.146.158: <SNIP!> The previous post originally mentioned a 20(19) pin connector - I have since realized I was off by 2 pins - and changed it, as you read. Also, now that I Googled for an *18* pin connector, I found the answer almost immediately (http://www.m571.com/m571/usb.htm). I /think/, but a kind reply/confirmation from someone would still be appreciated. As a sort of an excuse, the PCChips MB manual drawing shows 23(24) pins on the connector. Why I saw 20 is another question. Gotta be careful with that cream soda stuff. -- [from a recent conversation] thanatoid: So why did you decide you needed broadband? Neighbor: I wanted to read my e-mail faster.
Guest philo Posted August 30, 2008 Posted August 30, 2008 Re: The mystery of the PCChips M572 motherboard connector for add-on USB "card" Re: The mystery of the PCChips M572 motherboard connector for add-on USB "card" "thanatoid" <waiting@the.exit.invalid> wrote in message news:Xns9B0A297901EEthanexit@66.250.146.158... > thanatoid <waiting@the.exit.invalid> wrote in > news:Xns9B0A2749F2CBDthanexit@66.250.146.158: > > <SNIP!> > > The previous post originally mentioned a 20(19) pin connector - > I have since realized I was off by 2 pins - and changed it, as > you read. > > Also, now that I Googled for an *18* pin connector, I found the > answer almost immediately (http://www.m571.com/m571/usb.htm). > > I /think/, but a kind reply/confirmation from someone would > still be appreciated. > > As a sort of an excuse, the PCChips MB manual drawing shows > 23(24) pins on the connector. Why I saw 20 is another question. > > Gotta be careful with that cream soda stuff. > > If the headers have 19 pins and your plug matches (with 19 pins) it will probably be fine...however: USB headers have two rows of pins as you see, but there seems to be no "standard" way of doing things. Some have both +5 volt pins adjacent while in other cases, each row is reversed with the +5 volt pins at opposite ends. The safest thing to do is actually measure the voltage...even a cheapie volt meter will do. Just connect the negative lead to the computer's case and *carefully* touch the end pins to see which ones are +5 That's really the best way to do it and to be safe. Not that I would making the connections without checking, but if you do reverse things and have the +5 and minus pins shorted together... the power supply will "see" a direct short and not even turn on... so chances are you will not damage anything...but I don't suggest guessing! BTW: Do not, under any circumstances, connect the USB plugs to the headers with the machine on! If reversed, there will be a nice spark!!!!!
Guest thanatoid Posted August 30, 2008 Posted August 30, 2008 Re: The mystery of the PCChips M572 motherboard connector for add-on USB "card" Re: The mystery of the PCChips M572 motherboard connector for add-on USB "card" "philo" <philo@privacy.net> wrote in news:O7$ahLoCJHA.3268@TK2MSFTNGP03.phx.gbl: <SNIP> > If the headers have 19 pins > and your plug matches (with 19 pins) it will probably be > fine...however: > > USB headers have two rows of pins as you see, > but there seems to be no "standard" way of doing things. > > Some have both +5 volt pins adjacent > while in other cases, each row is reversed with the +5 volt > pins at opposite ends. The "card" has two 5-pin connectors and I apparently have to cut the extra grounds (5th wires)- - the m571 USB page explains why. The page (and Belkin manual) also explain exactly how to connect. > The safest thing to do is actually measure the > voltage...even a cheapie volt meter will do. > > Just connect the negative lead to the computer's case and > *carefully* touch the end pins to see which ones are +5 > > That's really the best way to do it and to be safe. > > Not that I would making the connections without checking, > but if you do reverse things and have the +5 and minus pins > shorted together... > the power supply will "see" a direct short and not even > turn on... so chances are you will not damage > anything...but I don't suggest guessing! > > BTW: Do not, under any circumstances, connect the USB plugs > to the headers with the machine on! If reversed, there > will be a nice spark!!!!! I tried this about 5 or 6 years ago, and I /may/ have damaged something (obviously not very important since everything else works fine), although there were no "special effects", but it just didn't work. Not that I could /really/ tell since I only had a new untested USB Wacom tablet so for all I know IT was defective. Returned it, took out the USB connector plate and that was that. Now I have a wireless USB mouse to test it with. And I know it works. And the page link mentioned above explains everything. I /knew/ there was a whole site about my motherboard but I forgot it was called m57*1* and not m572 (which is what I have and which only differs in one tiny aspect which I forget). Thanks for the warnings. I have been meaning to buy a voltmeter for 30 years. Maybe someday. (Why are we humans so weird - or some of us anyway?) Take care. I trust all is well with you. t. -- [from a recent conversation] thanatoid: So why did you decide you needed broadband? Neighbor: I wanted to read my e-mail faster.
Guest thanatoid Posted August 30, 2008 Posted August 30, 2008 Re: The mystery of the PCChips M572 motherboard connector for add-on USB "card" Re: The mystery of the PCChips M572 motherboard connector for add-on USB "card" "philo" <philo@privacy.net> wrote in news:#Y70UztCJHA.1224@TK2MSFTNGP02.phx.gbl: > Even a cheapie $10 meter will do the trick. I know... It's not the money, I just hate buying things I know I will never use... then every 5 years I need one, and then I get by without it - it's a /very/ vicious circle! > Things have been bussier than hell here. It's /very/ good to be busy, as you know. > I just got back from Arizona > > and in about a week or so, Colleen and I are heading to NY > /Manhattan/Chelsea > > Colleen just won the Eli Lilly artistic achievement award, > so we are being flown out to Indianapolis to recieve it. > > She has at least started to hit the big time. Allow me to forward congratulations. > As busy as I am, I still have time to fool with computers > as it's nice and cool in my basement workshop. <SNIP> Sounds like fun. Glad to hear it. Regards. -- [from a recent conversation] thanatoid: So why did you decide you needed broadband? Neighbor: I wanted to read my e-mail faster.
Guest philo Posted August 30, 2008 Posted August 30, 2008 Re: The mystery of the PCChips M572 motherboard connector for add-on USB "card" Re: The mystery of the PCChips M572 motherboard connector for add-on USB "card" "thanatoid" <waiting@the.exit.invalid> wrote in message news:Xns9B0A86FABAE2Athanexit@66.250.146.158... > "philo" <philo@privacy.net> wrote in > news:O7$ahLoCJHA.3268@TK2MSFTNGP03.phx.gbl: > > <SNIP> > > > If the headers have 19 pins > > and your plug matches (with 19 pins) it will probably be > > fine...however: > > > > USB headers have two rows of pins as you see, > > but there seems to be no "standard" way of doing things. > > > > Some have both +5 volt pins adjacent > > while in other cases, each row is reversed with the +5 volt > > pins at opposite ends. > > The "card" has two 5-pin connectors and I apparently have to cut > the extra grounds (5th wires)- - the m571 USB page explains why. > The page (and Belkin manual) also explain exactly how to > connect. > > > The safest thing to do is actually measure the > > voltage...even a cheapie volt meter will do. > > > > Just connect the negative lead to the computer's case and > > *carefully* touch the end pins to see which ones are +5 > > > > That's really the best way to do it and to be safe. > > > > Not that I would making the connections without checking, > > but if you do reverse things and have the +5 and minus pins > > shorted together... > > the power supply will "see" a direct short and not even > > turn on... so chances are you will not damage > > anything...but I don't suggest guessing! > > > > BTW: Do not, under any circumstances, connect the USB plugs > > to the headers with the machine on! If reversed, there > > will be a nice spark!!!!! > > I tried this about 5 or 6 years ago, and I /may/ have damaged > something (obviously not very important since everything else > works fine), although there were no "special effects", but it > just didn't work. Not that I could /really/ tell since I only > had a new untested USB Wacom tablet so for all I know IT was > defective. Returned it, took out the USB connector plate and > that was that. Now I have a wireless USB mouse to test it with. > And I know it works. > > And the page link mentioned above explains everything. I /knew/ > there was a whole site about my motherboard but I forgot it was > called m57*1* and not m572 (which is what I have and which only > differs in one tiny aspect which I forget). > > Thanks for the warnings. I have been meaning to buy a voltmeter > for 30 years. Maybe someday. (Why are we humans so weird - or > some of us anyway?) > > Take care. I trust all is well with you. > > t. > > Even a cheapie $10 meter will do the trick. Things have been bussier than hell here. I just got back from Arizona and in about a week or so, Colleen and I are heading to NY /Manhattan/Chelsea Colleen just won the Eli Lilly artistic achievement award, so we are being flown out to Indianapolis to recieve it. She has at least started to hit the big time. Ha!!!! As busy as I am, I still have time to fool with computers as it's nice and cool in my basement workshop. A few weeks back someone gave me an old Sun Workstation vintage 1994. It has a 110 mhz cpu and 224 megs of RAM. Though it has no value, back in 1994, the 224 megs of RAM alone would have been worth a small fortune. Anyway it was an opportunity for me to play with a SPARC machine... never had done that before. Since I have a few spare 2 gig scsi drives I have loaded a number of SPARC ports... Solaris, Debian, Net BSD and Slackware. I got Solaris running OK as one would expect since that was what the machine was designed for. It was a bit of a challenge getting Debian configured but I did it. The Slackware port is proving difficult at least to get the X-server going. The hangup was the sun mouse... and once I gave up and used a serial mouse and got the x-server going...the keyboard map is all wrong LOL Anyway, when I get back from NY I plan to rebuild my main machine as the mobo is starting to get flakey and I ordered an "obsolete" and cheap mobo. I have a dual core CPU in my junk box and hopefull it's good. I have a nice Gateway tower from a P-1 that I will use. Anyway have fun with your USB!
Guest philo Posted August 30, 2008 Posted August 30, 2008 Re: The mystery of the PCChips M572 motherboard connector for add-on USB "card" Re: The mystery of the PCChips M572 motherboard connector for add-on USB "card" "thanatoid" <waiting@the.exit.invalid> wrote in message news:Xns9B0A9F870D660thanexit@66.250.146.158... > "philo" <philo@privacy.net> wrote in > news:#Y70UztCJHA.1224@TK2MSFTNGP02.phx.gbl: > > > Even a cheapie $10 meter will do the trick. > > I know... It's not the money, I just hate buying things I know I > will never use... then every 5 years I need one, and then I get > by without it - it's a /very/ vicious circle! Well, it's good to have things that you don;t use very often :) I once kept a 1/4 HP motor for 30 years uintil I finally found a use for it !!!! > > > Things have been bussier than hell here. > > It's /very/ good to be busy, as you know. > > > I just got back from Arizona > > > > and in about a week or so, Colleen and I are heading to NY > > /Manhattan/Chelsea > > > > Colleen just won the Eli Lilly artistic achievement award, > > so we are being flown out to Indianapolis to recieve it. > > > > She has at least started to hit the big time. > > Allow me to forward congratulations. She says : Thanks > > > As busy as I am, I still have time to fool with computers > > as it's nice and cool in my basement workshop. > > <SNIP> > > Sounds like fun. Glad to hear it. > > Regards. > > > Well I have now turned all the spare parts I had into computers... so for a while my building craze is done! BTW: I live in Milwaukee and they are having a Harley Davison party this weekend... fun to watch...but the biggest bike I ever rode was a 450 cc and that was over 35 years ago! http://www2.jsonline.com/site/userphotos/gallery.aspx?catid=117
Guest Buffalo Posted August 30, 2008 Posted August 30, 2008 Re: The mystery of the PCChips M572 motherboard connector for add-on USB "card" Re: The mystery of the PCChips M572 motherboard connector for add-on USB "card" philo wrote: [snip] > I once kept a 1/4 HP motor for 30 years > uintil I finally found a use for it !!!! OK, I give up! What did you finally use it for?????
Guest philo Posted August 30, 2008 Posted August 30, 2008 Re: The mystery of the PCChips M572 motherboard connector for add-on USB "card" Re: The mystery of the PCChips M572 motherboard connector for add-on USB "card" "Buffalo" <Eric@nada.com.invalid> wrote in message news:ANWdnULGD8z1XiTVnZ2dnUVZ_hWdnZ2d@comcast.com... > > > philo wrote: > [snip] > > I once kept a 1/4 HP motor for 30 years > > uintil I finally found a use for it !!!! > > OK, I give up! What did you finally use it for????? > > This friend of mine wanted to do some "spin art" Put a piece of canvas on a board and spin it, then throw paint on it. A messy way to have fun!!!
Guest Franc Zabkar Posted August 30, 2008 Posted August 30, 2008 Re: The mystery of the PCChips M572 motherboard connector for add-on USB "card" Re: The mystery of the PCChips M572 motherboard connector for add-on USB "card" On 30 Aug 2008 04:56:57 GMT, thanatoid <waiting@the.exit.invalid> put finger to keyboard and composed: >thanatoid <waiting@the.exit.invalid> wrote in >news:Xns9B0A2749F2CBDthanexit@66.250.146.158: > ><SNIP!> > >The previous post originally mentioned a 20(19) pin connector - >I have since realized I was off by 2 pins - and changed it, as >you read. > >Also, now that I Googled for an *18* pin connector, I found the >answer almost immediately (http://www.m571.com/m571/usb.htm). > >I /think/, but a kind reply/confirmation from someone would >still be appreciated. > >As a sort of an excuse, the PCChips MB manual drawing shows >23(24) pins on the connector. Why I saw 20 is another question. > >Gotta be careful with that cream soda stuff. I'm using an M571 with the same 18-pin header. I have an "ATX Form Card", though. If you have any doubts as to the pinout, then test for continuity between the +5V and Ground pins at the header, and the red and black wires in a disc connector. If you reverse the Data+ and Data- pins, no damage will result. If you still need to be sure before connecting your USB devices, then check the voltage at the USB ports in the slot bracket, or test for continuity with a disc connector as before. See http://pinouts.ru/Slots/USB_pinout.shtml If by Belkin "card" you mean something like this ... http://www.m571.com/m571/usb_files/image005.gif .... then remove the fifth (shield) wire from the connector body (as you have suggested earlier) and plug the remaining four wires into the motherboard header. IIRC, +5V should be red and Ground is black. Be aware that you will probably be limited to USB 1.1. BTW, the manual in this archive shows an 18-pin ATX Form Card connector whose pinout matches the one at m571.com: http://www.elhvb.com/webhq/manuals/pcchips/m572.zip The archive also includes a 19990224S_AMI BIOS update, the release notes for which state that the previos release (1998/11/27) adds support for Cyrix MII-333,366 and AMD K6-2 333,366 CPUs. There is a text string, "M572-V1.2_8679", at the end of the BIOS image. Maybe the "V1.2" refers to the motherboard version (usually printed near the keyboard connector). Also be aware that your Intel i430TX chipset will only cache the first 64MB of RAM, so your system may run better with only 64MB under certain conditions (because Win9x loads programs into memory from the top down?). In general, though, you should be much better off with more RAM. Finally, I suggest you opt for an Ethernet connection to your xDSL modem rather than USB. Many people report stability problems with the latter. - Franc Zabkar -- Please remove one 'i' from my address when replying by email.
Guest thanatoid Posted August 30, 2008 Posted August 30, 2008 Re: The mystery of the PCChips M572 motherboard connector for add-on USB "card" Re: The mystery of the PCChips M572 motherboard connector for add-on USB "card" Franc Zabkar <fzabkar@iinternode.on.net> wrote in news:c8ljb4tde42evcaa1b2dl8snso49nlst43@4ax.com: > On 30 Aug 2008 04:56:57 GMT, thanatoid > <waiting@the.exit.invalid> put finger to keyboard and > composed: <SNIP> Thank you Franc. I really appreciate your help and knowledge, as always. I have DL'd quite a few drivers and BIOS updates for the 572. I also realize an Ethernet card is a better solution (and I don't even /have/ any USB stuff except for that wireless mouse which is for the future when I'm bedridden) but since I have the Belkin dual port USB "card" I thought I might try it to begin with and see if I can get it to work. I am also going to put W98SELite on this machine since I am not really in the mood to spend hours trying (and most likely failing) to get USB to run under 95, B or C. Thanks again. t. -- [from a recent conversation] thanatoid: So why did you decide you needed broadband? Neighbor: I wanted to read my e-mail faster.
Guest Buffalo Posted August 30, 2008 Posted August 30, 2008 Re: The mystery of the PCChips M572 motherboard connector for add-on USB "card" Re: The mystery of the PCChips M572 motherboard connector for add-on USB "card" philo wrote: > "Buffalo" <Eric@nada.com.invalid> wrote in message > news:ANWdnULGD8z1XiTVnZ2dnUVZ_hWdnZ2d@comcast.com... >> >> >> philo wrote: >> [snip] >>> I once kept a 1/4 HP motor for 30 years >>> uintil I finally found a use for it !!!! >> >> OK, I give up! What did you finally use it for????? >> >> > > This friend of mine wanted to do some "spin art" > > Put a piece of canvas on a board and spin it, > then throw paint on it. > > A messy way to have fun!!! Whee Haw!!!
Recommended Posts