Wireless modem and Router

[David1108]

Please could someone try to help me to sort out my Belkin G Wireless Modem Router and a Netgear N150 Wireless Router. The computer being used is a Acer Aspire with Windows XP Home with 1GB memory. First when I get hold of the Netgear N150 Wireless Router I set it up correct and I tryed it. It took out the phone line and made a noise like a police car. So I have now get the Belkin G Wireless Modem Router and put that onto the computer and that will not work. I then take the phone wire and put it into the back of the computer and it will not work on the internet. I do get the lan or highspeed internet show up and if I use dail up on the old Sagem from Talk Talk then I can get onto orange. But I like to make the ADSL cable go into the Modem then the wireless router and have it work for me.

 

Thanks

David.

[KenB]

Hi and welcome to ExTS

 

Belkin G Wireless Modem Router

 

Could you let us know the model number of this please ?

 

I like to make the ADSL cable go into the Modem then the wireless router

If you have a wireless modem router you don't need an extra modem.

 

Have you got filters on all equipment that is connected to the phone network ?

 

Are you trying to connect by cable or wireless ?

 

[ 3 questions ]

[David1108]

Hi there ?

First I don't know a name to put so that is why I have put the ? in the above "Hi There"

 

To Answer your questions, yes I do have the filter on the main phone line box and there are two wires coming from it, one bring the phone and the other one bring the ADSL. What I should be able to do is take the cable and put it into the modem Router. Put it will not get a message at the computer end. Tp amswer your next question which is the model number for the Belkin Wireless Modem Router, it is F5D7634-4A-H v2. I am trying to connect the cable and I did all that correct, but the computer does not want to see it. I have been though to network connections and I see that the high speed internet or lan is both in blue. The only way at this time to connect to the internet is to dail up 0 on the Sagem modem which I like to bin that. The new modem is not being seen by the computer.

[KenB]

First I don't know a name to put

It's Ken

 

Do you have your router set up exactly as the image below?

 

 

In particular - Connection #2

This may not be connected directly to a wall socket as shown but may be connected to a splitter or extension cable.

At this point there should be a filter.

 

User manual is here:

click here

 

Are the "Power" and "LAN" LEDs lit ?

[David1108]

Well it now works, Still need to work out how to get port 10024 for Free radio network as it is a VOIP or get a better modem router. So please could anyone help me open up port 10024.

 

Many thanks

David.

[David1108]

modem for VOIP

 

Hi there,

Been doing some web searching to see if I can come up with any information on a better router come modem for VOIP. I use no-ip.org and was reading there web site and see the the Linksys by Cisco BEFSR41EtherFast Cable/DSL router would work. Now if I can also get hold a a modem then I can use my Free Radio Network Server which is a VOIP system. Or if there is a free service like the no-ip.org I can see if I can do a port foward to it.

 

Anyone with any good ideas please send them to me.

Thanks

David.