Windows Server 2008 Ent 64Bit , remote desktop probmlem

September 4, 2008

Hello all ,

i have a strange problem with remote desktop in administrative mode ; i have

an HP DL380 G5 with 6 nic and i installed hp dirver for all hardaware .

When i connect one nic all is ok , remote desktop works but if i connect

another nic remote desktop don't works and the conecction in use immediatly

down .

I have disabled firewall and configured terminal services for use one nic

but don't works .

One nic is connected to company network and another nic to iscsi storage , i

have tried to change the nic but don't work and in event viewer no error

found .

September 4, 2008

Re: Windows Server 2008 Ent 64Bit , remote desktop probmlem

Hello Reggiani,

Please describe the roles your server has. Also it is not a good idea to

multihome a server with different ip addresses. Please post an unedited ipconfig

/all from it.

Best regards

Meinolf Weber

Disclaimer: This posting is provided "AS IS" with no warranties, and confers

no rights.

** Please do NOT email, only reply to Newsgroups

** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

> Hello all ,

> i have a strange problem with remote desktop in administrative mode ;

> i have

> an HP DL380 G5 with 6 nic and i installed hp dirver for all hardaware

> .

> When i connect one nic all is ok , remote desktop works but if i

> connect

> another nic remote desktop don't works and the conecction in use

> immediatly

> down .

> I have disabled firewall and configured terminal services for use one

> nic

> but don't works .

> One nic is connected to company network and another nic to iscsi

> storage , i have tried to change the nic but don't work and in event

> viewer no error found .

>

September 4, 2008

Re: Windows Server 2008 Ent 64Bit , remote desktop probmlem

"Meinolf Weber" <meiweb(nospam)@gmx.de> ha scritto nel messaggio

news:ff16fb665eb68cadc8162934395@msnews.microsoft.com...

> Hello Reggiani,

>

> Please describe the roles your server has. Also it is not a good idea to

> multihome a server with different ip addresses. Please post an unedited

> ipconfig /all from it.

The server is a domain member and have Hyper-V roles . Why is not good idea

have different ip addresses , the iscsi storage is connected to a physical

separate lan .

This is the output of ipconfig is :

Windows IP Configuration

Host Name . . . . . . . . . . . . : VULCANO

Primary Dns Suffix . . . . . . . : npsgroup.local

Node Type . . . . . . . . . . . . : Hybrid

IP Routing Enabled. . . . . . . . : No

WINS Proxy Enabled. . . . . . . . : No

DNS Suffix Search List. . . . . . : npsgroup.local

Ethernet adapter Local Area Connection 4:

Connection-specific DNS Suffix . : npsgroup.local

Description . . . . . . . . . . . : HP NC364T PCIe Quad Port Gigabit

Server Adapter #4

Physical Address. . . . . . . . . : 00-1C-C4-48-EF-86

DHCP Enabled. . . . . . . . . . . : No

Autoconfiguration Enabled . . . . : Yes

IPv4 Address. . . . . . . . . . . : 192.168.0.42(Preferred)

Subnet Mask . . . . . . . . . . . : 255.255.255.0

Default Gateway . . . . . . . . . : 192.168.0.1

DNS Servers . . . . . . . . . . . : 192.168.0.237

192.168.0.226

Primary WINS Server . . . . . . . : 192.168.0.237

NetBIOS over Tcpip. . . . . . . . : Enabled

Ethernet adapter Local Area Connection 5:

Media State . . . . . . . . . . . : Media disconnected

Connection-specific DNS Suffix . : npsgroup.local

Description . . . . . . . . . . . : HP NC373i Multifunction Gigabit

Server Adapter

Physical Address. . . . . . . . . : 00-1E-0B-73-35-3E

DHCP Enabled. . . . . . . . . . . : Yes

Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection 6:

Media State . . . . . . . . . . . : Media disconnected

Connection-specific DNS Suffix . :

Description . . . . . . . . . . . : HP NC373i Multifunction Gigabit

Server Adapter #2

Physical Address. . . . . . . . . : 00-1E-0B-73-35-40

DHCP Enabled. . . . . . . . . . . : Yes

Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection 3:

Media State . . . . . . . . . . . : Media disconnected

Connection-specific DNS Suffix . :

Description . . . . . . . . . . . : HP NC364T PCIe Quad Port Gigabit

Server Adapter #3

Physical Address. . . . . . . . . : 00-1C-C4-48-EF-87

DHCP Enabled. . . . . . . . . . . : Yes

Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection 2:

Media State . . . . . . . . . . . : Media disconnected

Connection-specific DNS Suffix . :

Description . . . . . . . . . . . : HP NC364T PCIe Quad Port Gigabit

Server Adapter #2

Physical Address. . . . . . . . . : 00-1C-C4-48-EF-84

DHCP Enabled. . . . . . . . . . . : Yes

Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :

Description . . . . . . . . . . . : HP NC364T PCIe Quad Port Gigabit

Server Adapter

Physical Address. . . . . . . . . : 00-1C-C4-48-EF-85

DHCP Enabled. . . . . . . . . . . : No

Autoconfiguration Enabled . . . . : Yes

IPv4 Address. . . . . . . . . . . : 192.168.69.2(Preferred)

Subnet Mask . . . . . . . . . . . : 255.255.255.0

Default Gateway . . . . . . . . . :

NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter Local Area Connection* 8:

Media State . . . . . . . . . . . : Media disconnected

Connection-specific DNS Suffix . :

Description . . . . . . . . . . . :

isatap.{CA666F95-CCB7-4113-82E8-899A9B1F3EA6}

Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0

DHCP Enabled. . . . . . . . . . . : No

Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 11:

Media State . . . . . . . . . . . : Media disconnected

Connection-specific DNS Suffix . :

Description . . . . . . . . . . . :

isatap.{0275EA91-5F38-42B4-9AE2-5D6F63E9A448}

Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0

DHCP Enabled. . . . . . . . . . . : No

Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 12:

Media State . . . . . . . . . . . : Media disconnected

Connection-specific DNS Suffix . :

Description . . . . . . . . . . . :

isatap.{9DB87B84-845C-4BD4-82A8-FED22AC9D421}

Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0

DHCP Enabled. . . . . . . . . . . : No

Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 13:

Media State . . . . . . . . . . . : Media disconnected

Connection-specific DNS Suffix . : npsgroup.local

Description . . . . . . . . . . . : isatap.npsgroup.local

Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0

DHCP Enabled. . . . . . . . . . . : No

Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 14:

Media State . . . . . . . . . . . : Media disconnected

Connection-specific DNS Suffix . :

Description . . . . . . . . . . . :

isatap.{72E843C3-D92D-474D-871F-ED7681A6DAB3}

Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0

DHCP Enabled. . . . . . . . . . . : No

Autoconfiguration Enabled . . . . : Yes

Thanks

Best regards

mattai

> Best regards

>

> Meinolf Weber

> Disclaimer: This posting is provided "AS IS" with no warranties, and

> confers no rights.

> ** Please do NOT email, only reply to Newsgroups

> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

>

>> Hello all ,

>> i have a strange problem with remote desktop in administrative mode ;

>> i have

>> an HP DL380 G5 with 6 nic and i installed hp dirver for all hardaware

>> .

>> When i connect one nic all is ok , remote desktop works but if i

>> connect

>> another nic remote desktop don't works and the conecction in use

>> immediatly

>> down .

>> I have disabled firewall and configured terminal services for use one

>> nic

>> but don't works .

>> One nic is connected to company network and another nic to iscsi

>> storage , i have tried to change the nic but don't work and in event

>> viewer no error found .

>>

>

September 4, 2008

Re: Windows Server 2008 Ent 64Bit , remote desktop probmlem

Hello Reggiani,

See here about server roles and multihoming:

1. Domain Controllers should not be multi-homed

2. Being a VPN Server and even simply running RRAS makes it multi-homed.

3. DNS,..even just all by itself, is better on a single homed machine.

4. Domain Controllers with the PDF Role are automatically Domain Master

Browser. Master Browsers should not be multi-homed

272294 - Active Directory Communication Fails on Multihomed Domain Controllers

http://support.microsoft.com/default.aspx?scid=kb;en-us;272294

191611 - Symptoms of Multihomed Browsers

http://support.microsoft.com/default.aspx?scid=kb;EN-US;191611

Phillip Windell

http://www.wandtv.com

The views expressed, are my own and not those of my employer, or Microsoft,

or anyone else associated with me, including my cats. -----------------------------------------------------

See also:

Multihomed DCs, DNS, RRAS servers.

+++++++++++++++++++++++++++++++++++++++++++++++++++++++

Below are the manual steps in more detail, which I had outlined in the above

paragraph:

Honestly, multi-homed DCs are not recommended because of the associated issues

that can occur, as you've encountered. We usually recommend purchasing an

inexpensive Linksys, DLink, etc, Cable/DSL router to perform NAT for you,

take out the extra NIC off the DC, but still let the DC handle DHCP (and

not the router).

Little background on AD and DNS:

First, just to get this out of the way, if you have your ISP's DNS addresses

in your IP configuration (DCs and clients), they need to be REMOVED.

If the ISP's DNS is in there, this will cause additional problems.

Also, AD registers certain records in DNS in the form of SRV records that

signify AD's resource and service locations. When there are multiple NICs,

each NIC registers. IF a client, or another DC queries DNS for this DC, it

may get the wrong record. One factor controlling this is Round Robin. If

a DC or client on another subnet that the DC is not configured on queries

for it, Round Robin will kick in offering one or the other. If the wrong

one gets offered, it may not have a route to it. On the other hand, Subnetmask

Priortization will ensure a querying client will get an IP that corresponds

to the subnet it's on, which will work. To insure everything works, stick

with one NIC.

Since this DC is multi-homed, it requires additional configuration to prevent

the public interface addresses from being registered in DNS. This creates

a problem for internal clients locating AD to authenticate and find other

services and resources such as the Global Catalog, file sharing and the SYSVOL

DFS share and can cause GPO errors with Userenv 1000 events to be logged,

authenticating to shares and printers, logging on takes forever, among numerous

other issues.

But if you like, there are some registry changes to eliminate the registration

of the external NIC. Here's the whole list of manual steps to follow.

But believe me, it's much easier to just get a separate NAT device or multihome

a non-DC then having to alter the DC. - Good luck!

1. Insure that all the NICS only point to your internal DNS server(s) only

and none others, such as your ISP's DNS servers' IP addresses.

2. In Network & Dialup properties, Advanced Menu item, Advanced Settings,

move the internal NIC (the network that AD is on) to the top of the binding

order (top of the list).

3. Disable the ability for the outer NIC to register. The procedure, as

mentioned, involves identifying the outer NIC's GUID number. This link will

show you how:

246804 - How to Enable-Disable Windows 2000 Dynamic DNS Registrations (per

NIC too):

http://support.microsoft.com/?id=246804

4. Disable NetBIOS on the outside NIC. That is performed by choosing to

disable NetBIOS in IP Properties, Advanced, and you will find that under the

"WINS" tab. You may want to look at step #3 in the article to show you how

to disable NetBIOS on the RRAS interfaces if this is a RRAS server.

296379 - How to Disable NetBIOS on an Incoming Remote Access Interface

[Registry Entry]:

http://support.microsoft.com/?id=296379

Note: A standard Windows service, called the "Browser service", provides

the list of machines, workgroup and domain names that you see in "My Network

Places" (or the legacy term "Network Neighborhood"). The Browser service

relies on the NetBIOS service. One major requirement of NetBIOS service is

a machine can only have one name to one IP address. It's sort of a fingerprint.

You can't have two brothers named Darrell. A multihomed machine will cause

duplicate name errors on itself because Windows sees itself with the same

name in the Browse List (My Network Places), but with different IPs. You

can only have one, hence the error generated.

5. Disable the "File and Print Service" and disable the "MS Client Service"

on the outer NIC. That is done in NIC properties by unchecking the respective

service under the general properties page. If you need these services on

the outside NIC (which is unlikely), which allow other machines to connect

to your machine for accessing resource on your machine (shared folders, printers,

etc.), then you will probably need to keep them enabled.

6. Uncheck "Register this connection" under IP properties, Advanced settings,

"DNS" tab.

7. Delete the outer NIC IP address, disable Netlogon registration, and manually

create the required records

a. In DNS under the zone name, (your DNS domain name), delete the outer NIC's

IP references for the "LdapIpAddress". If this is a GC, you will need to

delete the GC IP record as well (the "GcIpAddress"). To do that, in the DNS

console, under the zone name, you will see the _msdcs folder. Under that,

you will see the _gc folder. To the right, you will see the IP address referencing

the GC address. That is called the GcIpAddress. Delete the IP addresses referencing

the outer NIC.

i. To stop these two records from registering that information,

use the steps provided in the links below:

Private Network Interfaces on a Domain Controller Are Registered in

DNShttp://support.microsoft.com/?id=295328

ii. The one section of the article that disables these records is done with

this registry entry:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Netlogon\Parameters

(Create this Multi-String Value under it):

Registry value: DnsAvoidRegisterRecords

Data type: REG_MULTI_SZ

Values: LdapIpAddress

GcIpAddress

iii. Here is more information on these and other Netlogon Service records:

Restrict the DNS SRV resource records updated by the Netlogon service

[including GC]:

http://www.microsoft.com/technet/treeview/default.asp?url=/technet/prodtechnol/windowsserver2003/proddocs/standard/sag_dns_pro_no_rr_in_ad.asp

b. Then you will need to manually create these two records in DNS with the

IP addresses that you need for the DC. To create the

LdapIpAddress, create a new host under the domain, but leave the "hostname"

field blank, and provide the internal IP of the DC, which results in a

record that looks like:

(same as parent) A 192.168.5.200 (192.168.5.200 is used for illustrative

purposes)

i. You need to also manually create the GcIpAddress as well, if this is a

GC. That would be under the _msdcs._gc SRV record under the zone. It is created

in the same fashion as the LdapIpAddress mentioned above.

8. In the DNS console, right click the server name, choose properties, then

under the "Interfaces" tab, force it only to listen to the internal NIC's

IP address, and not the IP address of the outer NIC.

9. Since this is also a DNS server, the IPs from all NICs will register,

even if you tell it not to in the NIC properties. See this to show you how

to stop that behavior (this procedure is for Windows 2000, but will also

work for Windows 2003):

275554 - The Host's A Record Is Registered in DNS After You Choose Not to

Register the Connection's Address:

http://support.microsoft.com/?id=275554

10. If you haven't done so, configure a forwarder. You can use 4.2.2.2 if

not sure which DNS to forward to until you've got the DNS address of your

ISP.

How to set a forwarder? Good question. Depending on your operating

system,choose one of the following articles:

300202 - HOW TO: Configure DNS for Internet Access in Windows 2000 http://support.microsoft.com/?id=300202&FR=1

323380 - HOW TO: Configure DNS for Internet Access in Windows Server 2003

(How to configure a forwarder):

http://support.microsoft.com/d/id?=323380

Active Directory communication fails on multihomed domain controllers http://support.microsoft.com/kb/272294

<==*** Some additional reading ***==>

More links to read up and understand what is going on:

292822 - Name Resolution and Connectivity Issues on Windows 2000 Domain

Controller with Routing and Remote Access and DNS Insta {DNS and RRAS and

unwanted IPs registering]:

http://support.microsoft.com/?id=292822

Active Directory communication fails on multihomed domain controllers http://support.microsoft.com/kb/272294

246804 - How to enable or disable DNS updates in Windows 2000 and in Windows

Server 2003

http://support.microsoft.com/?id=246804

295328 - Private Network Interfaces on a Domain Controller Are Registered in

DNS

[also shows DnsAvoidRegisterRecords LdapIpAddress to avoid reg sameasparent

private IP]:

http://support.microsoft.com/?id=295328

306602 - How to Optimize the Location of a DC or GC That Resides Outside of

a Client's

Site [includes info LdapIpAddress and GcIpAddress information and the SRV

mnemonic values]:

http://support.microsoft.com/?id=306602

825036 - Best practices for DNS client settings in Windows 2000 Server and

in Windows Server 2003 (including how-to configure a forwarder): http://support.microsoft.com/default.aspx?scid=kb;en-us;825036

291382 - Frequently asked questions about Windows 2000 DNS and Windows

Server 2003 DNS

http://support.microsoft.com/?id=291382

296379 - How to Disable NetBIOS on an Incoming Remote Access Interface

[Registry Entry]:

http://support.microsoft.com/?id=296379

Rid Pool Errors and other mutlhomed DC errors, and how to configure a multihomed

DC, Ace Fekay, 24 Feb 2006 http://www.ureader.com/message/3244572.aspx

_________________________ +++++++++++++++++++++++++++++++++++++++++++++++++++++++

+++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++++++++++++++++++++++++++++++++++++++++++++

--

Regards,

Ace

This posting is provided "AS-IS" with no warranties or guarantees and confers

no rights.

Ace Fekay, MCSE 2003 & 2000, MCSA 2003 & 2000, MCSE+I, MCT, MVP

Microsoft MVP - Directory Services

Microsoft Certified Trainer

Infinite Diversities in Infinite Combinations

Having difficulty reading or finding responses to your post?

Instead of the website you're using, try using OEx (Outlook Express

or any other newsreader), and configure a news account, pointing to

news.microsoft.com. Anonymous access. It's free - no username or password

required nor do you need a Newsgroup Usenet account with your ISP. It

connects directly to the Microsoft Public Newsgroups. OEx allows you

o easily find, track threads, cross-post, sort by date, poster's name,

watched threads or subject. It's easy:

How to Configure OEx for Internet News

http://support.microsoft.com/?id=171164

Best regards

Meinolf Weber

Disclaimer: This posting is provided "AS IS" with no warranties, and confers

no rights.

** Please do NOT email, only reply to Newsgroups

** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

> "Meinolf Weber" <meiweb(nospam)@gmx.de> ha scritto nel messaggio

> news:ff16fb665eb68cadc8162934395@msnews.microsoft.com...

>

>> Hello Reggiani,

>>

>> Please describe the roles your server has. Also it is not a good idea

>> to multihome a server with different ip addresses. Please post an

>> unedited ipconfig /all from it.

>>

> The server is a domain member and have Hyper-V roles . Why is not good

> idea

> have different ip addresses , the iscsi storage is connected to a

> physical

> separate lan .

> This is the output of ipconfig is :

> Windows IP Configuration

>

> Host Name . . . . . . . . . . . . : VULCANO

> Primary Dns Suffix . . . . . . . : npsgroup.local

> Node Type . . . . . . . . . . . . : Hybrid

> IP Routing Enabled. . . . . . . . : No

> WINS Proxy Enabled. . . . . . . . : No

> DNS Suffix Search List. . . . . . : npsgroup.local

> Ethernet adapter Local Area Connection 4:

>

> Connection-specific DNS Suffix . : npsgroup.local

> Description . . . . . . . . . . . : HP NC364T PCIe Quad Port

> Gigabit

> Server Adapter #4

> Physical Address. . . . . . . . . : 00-1C-C4-48-EF-86

> DHCP Enabled. . . . . . . . . . . : No

> Autoconfiguration Enabled . . . . : Yes

> IPv4 Address. . . . . . . . . . . : 192.168.0.42(Preferred)

> Subnet Mask . . . . . . . . . . . : 255.255.255.0

> Default Gateway . . . . . . . . . : 192.168.0.1

> DNS Servers . . . . . . . . . . . : 192.168.0.237

> 192.168.0.226

> Primary WINS Server . . . . . . . : 192.168.0.237

> NetBIOS over Tcpip. . . . . . . . : Enabled

> Ethernet adapter Local Area Connection 5:

>

> Media State . . . . . . . . . . . : Media disconnected

> Connection-specific DNS Suffix . : npsgroup.local

> Description . . . . . . . . . . . : HP NC373i Multifunction Gigabit

> Server Adapter

> Physical Address. . . . . . . . . : 00-1E-0B-73-35-3E

> DHCP Enabled. . . . . . . . . . . : Yes

> Autoconfiguration Enabled . . . . : Yes

> Ethernet adapter Local Area Connection 6:

>

> Media State . . . . . . . . . . . : Media disconnected

> Connection-specific DNS Suffix . :

> Description . . . . . . . . . . . : HP NC373i Multifunction Gigabit

> Server Adapter #2

> Physical Address. . . . . . . . . : 00-1E-0B-73-35-40

> DHCP Enabled. . . . . . . . . . . : Yes

> Autoconfiguration Enabled . . . . : Yes

> Ethernet adapter Local Area Connection 3:

>

> Media State . . . . . . . . . . . : Media disconnected

> Connection-specific DNS Suffix . :

> Description . . . . . . . . . . . : HP NC364T PCIe Quad Port

> Gigabit

> Server Adapter #3

> Physical Address. . . . . . . . . : 00-1C-C4-48-EF-87

> DHCP Enabled. . . . . . . . . . . : Yes

> Autoconfiguration Enabled . . . . : Yes

> Ethernet adapter Local Area Connection 2:

>

> Media State . . . . . . . . . . . : Media disconnected

> Connection-specific DNS Suffix . :

> Description . . . . . . . . . . . : HP NC364T PCIe Quad Port

> Gigabit

> Server Adapter #2

> Physical Address. . . . . . . . . : 00-1C-C4-48-EF-84

> DHCP Enabled. . . . . . . . . . . : Yes

> Autoconfiguration Enabled . . . . : Yes

> Ethernet adapter Local Area Connection:

>

> Connection-specific DNS Suffix . :

> Description . . . . . . . . . . . : HP NC364T PCIe Quad Port

> Gigabit

> Server Adapter

> Physical Address. . . . . . . . . : 00-1C-C4-48-EF-85

> DHCP Enabled. . . . . . . . . . . : No

> Autoconfiguration Enabled . . . . : Yes

> IPv4 Address. . . . . . . . . . . : 192.168.69.2(Preferred)

> Subnet Mask . . . . . . . . . . . : 255.255.255.0

> Default Gateway . . . . . . . . . :

> NetBIOS over Tcpip. . . . . . . . : Enabled

> Tunnel adapter Local Area Connection* 8:

>

> Media State . . . . . . . . . . . : Media disconnected

> Connection-specific DNS Suffix . :

> Description . . . . . . . . . . . :

> isatap.{CA666F95-CCB7-4113-82E8-899A9B1F3EA6}

> Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0

> DHCP Enabled. . . . . . . . . . . : No

> Autoconfiguration Enabled . . . . : Yes

> Tunnel adapter Local Area Connection* 11:

>

> Media State . . . . . . . . . . . : Media disconnected

> Connection-specific DNS Suffix . :

> Description . . . . . . . . . . . :

> isatap.{0275EA91-5F38-42B4-9AE2-5D6F63E9A448}

> Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0

> DHCP Enabled. . . . . . . . . . . : No

> Autoconfiguration Enabled . . . . : Yes

> Tunnel adapter Local Area Connection* 12:

>

> Media State . . . . . . . . . . . : Media disconnected

> Connection-specific DNS Suffix . :

> Description . . . . . . . . . . . :

> isatap.{9DB87B84-845C-4BD4-82A8-FED22AC9D421}

> Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0

> DHCP Enabled. . . . . . . . . . . : No

> Autoconfiguration Enabled . . . . : Yes

> Tunnel adapter Local Area Connection* 13:

>

> Media State . . . . . . . . . . . : Media disconnected

> Connection-specific DNS Suffix . : npsgroup.local

> Description . . . . . . . . . . . : isatap.npsgroup.local

> Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0

> DHCP Enabled. . . . . . . . . . . : No

> Autoconfiguration Enabled . . . . : Yes

> Tunnel adapter Local Area Connection* 14:

>

> Media State . . . . . . . . . . . : Media disconnected

> Connection-specific DNS Suffix . :

> Description . . . . . . . . . . . :

> isatap.{72E843C3-D92D-474D-871F-ED7681A6DAB3}

> Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0

> DHCP Enabled. . . . . . . . . . . : No

> Autoconfiguration Enabled . . . . : Yes

> Thanks

>

> Best regards

> mattai

>> Best regards

>>

>> Meinolf Weber

>> Disclaimer: This posting is provided "AS IS" with no warranties, and

>> confers no rights.

>> ** Please do NOT email, only reply to Newsgroups

>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

>>> Hello all ,

>>> i have a strange problem with remote desktop in administrative mode

>>> ;

>>> i have

>>> an HP DL380 G5 with 6 nic and i installed hp dirver for all

>>> hardaware

>>> .

>>> When i connect one nic all is ok , remote desktop works but if i

>>> connect

>>> another nic remote desktop don't works and the conecction in use

>>> immediatly

>>> down .

>>> I have disabled firewall and configured terminal services for use

>>> one

>>> nic

>>> but don't works .

>>> One nic is connected to company network and another nic to iscsi

>>> storage , i have tried to change the nic but don't work and in event

>>> viewer no error found .

September 4, 2008

Re: Windows Server 2008 Ent 64Bit , remote desktop probmlem

Hello Reggiani,

You have different subnets on the same server x.x.69.x and x.x.0.x, so i

think this will be the problem.

Best regards

Meinolf Weber

Disclaimer: This posting is provided "AS IS" with no warranties, and confers

no rights.

** Please do NOT email, only reply to Newsgroups

** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

> "Meinolf Weber" <meiweb(nospam)@gmx.de> ha scritto nel messaggio

> news:ff16fb665eb68cadc8162934395@msnews.microsoft.com...

>

>> Hello Reggiani,

>>

>> Please describe the roles your server has. Also it is not a good idea

>> to multihome a server with different ip addresses. Please post an

>> unedited ipconfig /all from it.

>>

> The server is a domain member and have Hyper-V roles . Why is not good

> idea

> have different ip addresses , the iscsi storage is connected to a

> physical

> separate lan .

> This is the output of ipconfig is :

> Windows IP Configuration

>

> Host Name . . . . . . . . . . . . : VULCANO

> Primary Dns Suffix . . . . . . . : npsgroup.local

> Node Type . . . . . . . . . . . . : Hybrid

> IP Routing Enabled. . . . . . . . : No

> WINS Proxy Enabled. . . . . . . . : No

> DNS Suffix Search List. . . . . . : npsgroup.local

> Ethernet adapter Local Area Connection 4:

>

> Connection-specific DNS Suffix . : npsgroup.local

> Description . . . . . . . . . . . : HP NC364T PCIe Quad Port

> Gigabit

> Server Adapter #4

> Physical Address. . . . . . . . . : 00-1C-C4-48-EF-86

> DHCP Enabled. . . . . . . . . . . : No

> Autoconfiguration Enabled . . . . : Yes

> IPv4 Address. . . . . . . . . . . : 192.168.0.42(Preferred)

> Subnet Mask . . . . . . . . . . . : 255.255.255.0

> Default Gateway . . . . . . . . . : 192.168.0.1

> DNS Servers . . . . . . . . . . . : 192.168.0.237

> 192.168.0.226

> Primary WINS Server . . . . . . . : 192.168.0.237

> NetBIOS over Tcpip. . . . . . . . : Enabled

> Ethernet adapter Local Area Connection 5:

>

> Media State . . . . . . . . . . . : Media disconnected

> Connection-specific DNS Suffix . : npsgroup.local

> Description . . . . . . . . . . . : HP NC373i Multifunction Gigabit

> Server Adapter

> Physical Address. . . . . . . . . : 00-1E-0B-73-35-3E

> DHCP Enabled. . . . . . . . . . . : Yes

> Autoconfiguration Enabled . . . . : Yes

> Ethernet adapter Local Area Connection 6:

>

> Media State . . . . . . . . . . . : Media disconnected

> Connection-specific DNS Suffix . :

> Description . . . . . . . . . . . : HP NC373i Multifunction Gigabit

> Server Adapter #2

> Physical Address. . . . . . . . . : 00-1E-0B-73-35-40

> DHCP Enabled. . . . . . . . . . . : Yes

> Autoconfiguration Enabled . . . . : Yes

> Ethernet adapter Local Area Connection 3:

>

> Media State . . . . . . . . . . . : Media disconnected

> Connection-specific DNS Suffix . :

> Description . . . . . . . . . . . : HP NC364T PCIe Quad Port

> Gigabit

> Server Adapter #3

> Physical Address. . . . . . . . . : 00-1C-C4-48-EF-87

> DHCP Enabled. . . . . . . . . . . : Yes

> Autoconfiguration Enabled . . . . : Yes

> Ethernet adapter Local Area Connection 2:

>

> Media State . . . . . . . . . . . : Media disconnected

> Connection-specific DNS Suffix . :

> Description . . . . . . . . . . . : HP NC364T PCIe Quad Port

> Gigabit

> Server Adapter #2

> Physical Address. . . . . . . . . : 00-1C-C4-48-EF-84

> DHCP Enabled. . . . . . . . . . . : Yes

> Autoconfiguration Enabled . . . . : Yes

> Ethernet adapter Local Area Connection:

>

> Connection-specific DNS Suffix . :

> Description . . . . . . . . . . . : HP NC364T PCIe Quad Port

> Gigabit

> Server Adapter

> Physical Address. . . . . . . . . : 00-1C-C4-48-EF-85

> DHCP Enabled. . . . . . . . . . . : No

> Autoconfiguration Enabled . . . . : Yes

> IPv4 Address. . . . . . . . . . . : 192.168.69.2(Preferred)

> Subnet Mask . . . . . . . . . . . : 255.255.255.0

> Default Gateway . . . . . . . . . :

> NetBIOS over Tcpip. . . . . . . . : Enabled

> Tunnel adapter Local Area Connection* 8:

>

> Media State . . . . . . . . . . . : Media disconnected

> Connection-specific DNS Suffix . :

> Description . . . . . . . . . . . :

> isatap.{CA666F95-CCB7-4113-82E8-899A9B1F3EA6}

> Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0

> DHCP Enabled. . . . . . . . . . . : No

> Autoconfiguration Enabled . . . . : Yes

> Tunnel adapter Local Area Connection* 11:

>

> Media State . . . . . . . . . . . : Media disconnected

> Connection-specific DNS Suffix . :

> Description . . . . . . . . . . . :

> isatap.{0275EA91-5F38-42B4-9AE2-5D6F63E9A448}

> Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0

> DHCP Enabled. . . . . . . . . . . : No

> Autoconfiguration Enabled . . . . : Yes

> Tunnel adapter Local Area Connection* 12:

>

> Media State . . . . . . . . . . . : Media disconnected

> Connection-specific DNS Suffix . :

> Description . . . . . . . . . . . :

> isatap.{9DB87B84-845C-4BD4-82A8-FED22AC9D421}

> Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0

> DHCP Enabled. . . . . . . . . . . : No

> Autoconfiguration Enabled . . . . : Yes

> Tunnel adapter Local Area Connection* 13:

>

> Media State . . . . . . . . . . . : Media disconnected

> Connection-specific DNS Suffix . : npsgroup.local

> Description . . . . . . . . . . . : isatap.npsgroup.local

> Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0

> DHCP Enabled. . . . . . . . . . . : No

> Autoconfiguration Enabled . . . . : Yes

> Tunnel adapter Local Area Connection* 14:

>

> Media State . . . . . . . . . . . : Media disconnected

> Connection-specific DNS Suffix . :

> Description . . . . . . . . . . . :

> isatap.{72E843C3-D92D-474D-871F-ED7681A6DAB3}

> Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0

> DHCP Enabled. . . . . . . . . . . : No

> Autoconfiguration Enabled . . . . : Yes

> Thanks

>

> Best regards

> mattai

>> Best regards

>>

>> Meinolf Weber

>> Disclaimer: This posting is provided "AS IS" with no warranties, and

>> confers no rights.

>> ** Please do NOT email, only reply to Newsgroups

>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

>>> Hello all ,

>>> i have a strange problem with remote desktop in administrative mode

>>> ;

>>> i have

>>> an HP DL380 G5 with 6 nic and i installed hp dirver for all

>>> hardaware

>>> .

>>> When i connect one nic all is ok , remote desktop works but if i

>>> connect

>>> another nic remote desktop don't works and the conecction in use

>>> immediatly

>>> down .

>>> I have disabled firewall and configured terminal services for use

>>> one

>>> nic

>>> but don't works .

>>> One nic is connected to company network and another nic to iscsi

>>> storage , i have tried to change the nic but don't work and in event

>>> viewer no error found .

September 4, 2008

Re: Windows Server 2008 Ent 64Bit , remote desktop probmlem

"Meinolf Weber" <meiweb(nospam)@gmx.de> wrote:

> Hello Reggiani,

>

> You have different subnets on the same server x.x.69.x and x.x.0.x, so i

> think this will be the problem.

>

Doh, to have 2 network cards in the *same* subnet, that would be a problem.

They must be in different subnets.

ThePro

Sign In

Windows Server 2008 Ent 64Bit , remote desktop probmlem

Recommended Posts

Guest Reggiani Mattia

Popular Days

Popular Days

Guest Meinolf Weber

Guest Reggiani Mattia

Guest Meinolf Weber

Guest Meinolf Weber

Guest ThePro

Similar Content

Why am I receiving a "Remote desktop license issue" alert when trying to log in to a server via Remote Desktop from a specific PC, while other PCs can

Remote desktop works local network but not remote.

Problems with printers on remote desktops (windows server 2022)

Remote desktop new password

ADK and Windows 2019 Server

Browse

Activity

Site Info