Guest JohnD Posted September 11, 2008 Posted September 11, 2008 I have a Compaq Evo notebook that I "inherited." Couple weeks ago on boot up I got a message that Windows had recovered from a catastrophic failure and did I want to advise Microsoft? So I did and got a Microsoft Online Crash Analysis that advised me to run Windows Memory Diagnostic. So I did that and it ran all night and came up with nothing. The computer boots into XP Pro and runs, but I know it is not healthy because I no longer have the desktop of shortcut icons that I used to have - just a half dozen or so basic ones. Also. I am unable to restore to a date before the crash. In fact I can't even restore to yesterday. So, I'm thinking Repair Install and I have been reading previous posts on the subject and I have downloaded Michael Stevens' instructions and I feel confident I can do what is required. But I am still confused about the Product Key. The sticker on the bottom of the case contains a Product Key and BeLarc gives me a Key and they are not the same. This is obviously an OEM machine, but I got no Software Recovery CD's and no XP CD with the machine. I do have several XP Pro retail CD's that belong to other PC's that I have, but their Keys have obviously been activated. So, my question is: In view of the above, if I do a Repair Install using one of my retail CD's, will I be able to activate and, if so, which Product Key would I use?
Guest David B. Posted September 11, 2008 Posted September 11, 2008 Re: Repair Install You cannot do a repair install on an OEM installation with retail media. The product key difference is perfectly normal for an OEM machine. If you install one of your retail licenses on the laptop you'll have to remove it from the PC it's currently on. The solution to your problem is to beg/borrow/locate a Microsoft XP Pro OEM cd und use it to perform the repair installation. -- ---- Crosspost, do not multipost http://www.blakjak.demon.co.uk/mul_crss.htm How to ask a question http://support.microsoft.com/kb/555375 Help Us Help You http://dts-l.net/goodpost.htm "JohnD" <JohnD@discussions.microsoft.com> wrote in message news:55CC460D-D291-4977-9CE5-6D4E527E5A44@microsoft.com... >I have a Compaq Evo notebook that I "inherited." Couple weeks ago on boot >up > I got a message that Windows had recovered from a catastrophic failure and > did I want to advise Microsoft? So I did and got a Microsoft Online Crash > Analysis that advised me to run Windows Memory Diagnostic. > > So I did that and it ran all night and came up with nothing. > > The computer boots into XP Pro and runs, but I know it is not healthy > because I no longer have the desktop of shortcut icons that I used to > have - > just a half dozen or so basic ones. Also. I am unable to restore to a > date > before the crash. In fact I can't even restore to yesterday. > > So, I'm thinking Repair Install and I have been reading previous posts on > the subject and I have downloaded Michael Stevens' instructions and I feel > confident I can do what is required. But I am still confused about the > Product Key. > > The sticker on the bottom of the case contains a Product Key and BeLarc > gives me a Key and they are not the same. > > This is obviously an OEM machine, but I got no Software Recovery CD's and > no > XP CD with the machine. > > I do have several XP Pro retail CD's that belong to other PC's that I > have, > but their Keys have obviously been activated. > > So, my question is: In view of the above, if I do a Repair Install using > one of my retail CD's, will I be able to activate and, if so, which > Product > Key would I use?
Guest PA Bear [MS MVP] Posted September 11, 2008 Posted September 11, 2008 Re: Repair Install Contact HP (Compaq) Support for instructions on how to use the hidden Recovery/Restore partition. -- ~Robear Dyer (PA Bear) MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002 AumHa VSOP & Admin http://aumha.net DTS-L http://dts-l.net/ JohnD wrote: > I have a Compaq Evo notebook that I "inherited." Couple weeks ago on boot > up I got a message that Windows had recovered from a catastrophic failure > and did I want to advise Microsoft? So I did and got a Microsoft Online > Crash Analysis that advised me to run Windows Memory Diagnostic. > > So I did that and it ran all night and came up with nothing. > > The computer boots into XP Pro and runs, but I know it is not healthy > because I no longer have the desktop of shortcut icons that I used to > have - > just a half dozen or so basic ones. Also. I am unable to restore to a > date > before the crash. In fact I can't even restore to yesterday. > > So, I'm thinking Repair Install and I have been reading previous posts on > the subject and I have downloaded Michael Stevens' instructions and I feel > confident I can do what is required. But I am still confused about the > Product Key. > > The sticker on the bottom of the case contains a Product Key and BeLarc > gives me a Key and they are not the same. > > This is obviously an OEM machine, but I got no Software Recovery CD's and > no > XP CD with the machine. > > I do have several XP Pro retail CD's that belong to other PC's that I > have, > but their Keys have obviously been activated. > > So, my question is: In view of the above, if I do a Repair Install using > one of my retail CD's, will I be able to activate and, if so, which > Product > Key would I use?
Guest JohnD Posted September 12, 2008 Posted September 12, 2008 Re: Repair Install Thanks for thr advice, but this confuses me even more. I have been told by others in posts to a different thread that the Product Key is not on an install cd in any way, shape or form. So what difference does it make what install cd I use as long as I key in the appropriate Product Key? How would the activation process know what cd I actually used? "David B." wrote: > You cannot do a repair install on an OEM installation with retail media. > The product key difference is perfectly normal for an OEM machine. > If you install one of your retail licenses on the laptop you'll have to > remove it from the PC it's currently on. > > The solution to your problem is to beg/borrow/locate a Microsoft XP Pro OEM > cd und use it to perform the repair installation. > > -- > > ---- > Crosspost, do not multipost http://www.blakjak.demon.co.uk/mul_crss.htm > How to ask a question http://support.microsoft.com/kb/555375 > Help Us Help You http://dts-l.net/goodpost.htm > > > > "JohnD" <JohnD@discussions.microsoft.com> wrote in message > news:55CC460D-D291-4977-9CE5-6D4E527E5A44@microsoft.com... > >I have a Compaq Evo notebook that I "inherited." Couple weeks ago on boot > >up > > I got a message that Windows had recovered from a catastrophic failure and > > did I want to advise Microsoft? So I did and got a Microsoft Online Crash > > Analysis that advised me to run Windows Memory Diagnostic. > > > > So I did that and it ran all night and came up with nothing. > > > > The computer boots into XP Pro and runs, but I know it is not healthy > > because I no longer have the desktop of shortcut icons that I used to > > have - > > just a half dozen or so basic ones. Also. I am unable to restore to a > > date > > before the crash. In fact I can't even restore to yesterday. > > > > So, I'm thinking Repair Install and I have been reading previous posts on > > the subject and I have downloaded Michael Stevens' instructions and I feel > > confident I can do what is required. But I am still confused about the > > Product Key. > > > > The sticker on the bottom of the case contains a Product Key and BeLarc > > gives me a Key and they are not the same. > > > > This is obviously an OEM machine, but I got no Software Recovery CD's and > > no > > XP CD with the machine. > > > > I do have several XP Pro retail CD's that belong to other PC's that I > > have, > > but their Keys have obviously been activated. > > > > So, my question is: In view of the above, if I do a Repair Install using > > one of my retail CD's, will I be able to activate and, if so, which > > Product > > Key would I use? > >
Guest Malke Posted September 12, 2008 Posted September 12, 2008 Re: Repair Install JohnD wrote: > Thanks for thr advice, but this confuses me even more. I have been told > by others in posts to a different thread that the Product Key is not on an > install cd in any way, shape or form. So what difference does it make > what > install cd I use as long as I key in the appropriate Product Key? How > would the activation process know what cd I actually used? The fact that the Product Key is not on the XP install CD has nothing to do with the fact that you need the right installation media to go with your Product Key. If you have an OEM machine, you need OEM installation media (generic or branded). This is different in Vista, but you need the correct installation media in XP. Malke -- MS-MVP Elephant Boy Computers - Don't Panic! FAQ - http://www.elephantboycomputers.com/#FAQ
Guest David B. Posted September 12, 2008 Posted September 12, 2008 Re: Repair Install The keys are not on the CD, but they are specific to the TYPE of media, meaning you cannot use an OEM key with retail media, if you try a repair install using your retail media with the OEM key from the Compaq, it will tell you the key is not valid. -- ---- Crosspost, do not multipost http://www.blakjak.demon.co.uk/mul_crss.htm How to ask a question http://support.microsoft.com/kb/555375 Help Us Help You http://dts-l.net/goodpost.htm "JohnD" <JohnD@discussions.microsoft.com> wrote in message news:09926FB6-4630-4C57-ABA2-F73C2CB6D1AE@microsoft.com... > Thanks for thr advice, but this confuses me even more. I have been told > by > others in posts to a different thread that the Product Key is not on an > install cd in any way, shape or form. So what difference does it make > what > install cd I use as long as I key in the appropriate Product Key? How > would > the activation process know what cd I actually used? > > "David B." wrote: > >> You cannot do a repair install on an OEM installation with retail media. >> The product key difference is perfectly normal for an OEM machine. >> If you install one of your retail licenses on the laptop you'll have to >> remove it from the PC it's currently on. >> >> The solution to your problem is to beg/borrow/locate a Microsoft XP Pro >> OEM >> cd und use it to perform the repair installation. >> >> -- >> >> ---- >> Crosspost, do not multipost http://www.blakjak.demon.co.uk/mul_crss.htm >> How to ask a question http://support.microsoft.com/kb/555375 >> Help Us Help You http://dts-l.net/goodpost.htm >> >> >> >> "JohnD" <JohnD@discussions.microsoft.com> wrote in message >> news:55CC460D-D291-4977-9CE5-6D4E527E5A44@microsoft.com... >> >I have a Compaq Evo notebook that I "inherited." Couple weeks ago on >> >boot >> >up >> > I got a message that Windows had recovered from a catastrophic failure >> > and >> > did I want to advise Microsoft? So I did and got a Microsoft Online >> > Crash >> > Analysis that advised me to run Windows Memory Diagnostic. >> > >> > So I did that and it ran all night and came up with nothing. >> > >> > The computer boots into XP Pro and runs, but I know it is not healthy >> > because I no longer have the desktop of shortcut icons that I used to >> > have - >> > just a half dozen or so basic ones. Also. I am unable to restore to a >> > date >> > before the crash. In fact I can't even restore to yesterday. >> > >> > So, I'm thinking Repair Install and I have been reading previous posts >> > on >> > the subject and I have downloaded Michael Stevens' instructions and I >> > feel >> > confident I can do what is required. But I am still confused about the >> > Product Key. >> > >> > The sticker on the bottom of the case contains a Product Key and BeLarc >> > gives me a Key and they are not the same. >> > >> > This is obviously an OEM machine, but I got no Software Recovery CD's >> > and >> > no >> > XP CD with the machine. >> > >> > I do have several XP Pro retail CD's that belong to other PC's that I >> > have, >> > but their Keys have obviously been activated. >> > >> > So, my question is: In view of the above, if I do a Repair Install >> > using >> > one of my retail CD's, will I be able to activate and, if so, which >> > Product >> > Key would I use? >> >>
Guest Daave Posted September 13, 2008 Posted September 13, 2008 Re: Repair Install "JohnD" <JohnD@discussions.microsoft.com> wrote in message news:55CC460D-D291-4977-9CE5-6D4E527E5A44@microsoft.com... >I have a Compaq Evo notebook that I "inherited." Couple weeks ago on >boot up > I got a message that Windows had recovered from a catastrophic failure > and > did I want to advise Microsoft? So I did and got a Microsoft Online > Crash > Analysis that advised me to run Windows Memory Diagnostic. > > So I did that and it ran all night and came up with nothing. Did you run it in Extended Mode? The reason I ask is the same thing just happened here. I suspected the memory might be faulty. I ran Memtest 86+ for over 7 hours (22 passes) with no errors. I then ran Windows Memory Diagnostic overnight. Again, no errors. However when I ran WMG in Extended Mode, at the very end of third pass, sure enough there were errors galore in the RAM module in the first slot. If this is a hardware issue, you need to be careful, It's possible to damage your Windows installation. Save all your data!
Recommended Posts