Guest littlenemo Posted September 24, 2008 Posted September 24, 2008 I'm ;not exactly a newbie, but I'm kind of stupid regarding some things, so please bear with me. I'm planning to install WindowsXP SP2 on some new hardware with clean (unformatted, SATA) drives. The motherboard is an Abit AB9 Quad GT which will have an Intel Core2 quad processor. The logistics have me a little puzzled. I'm not sure if I have what I need to get through the installation without problems. My hard drive will be a SATA drive. At this point, I don't have any floppy drive (not sure if I need one). I have only an LG SATA DVD ROM optical drive. I know the motherboard supports SATA drives, but I'm pretty sure I need some software drivers as well. I've heard that XP didn't support SATA, but I'm not sure exactly what that meant. The Abit motherboard came with a CD ROM which looks like it has SATA drivers on it. I suppose I can't very well use the optical drive for installation of XP unless the SATA drivers are loaded. Similarly, I can't use it to load the motherboard drivers either, since the SATA DVD ROM is the only means I have to access both the Abit CD and the XP CD. Can anybody suggest a neat solution to this problem? Kind of a catch-22 or a paradox. I need the SATA optical drive to access the Abit CD and the XP CD but it won't work without first accessing a CD containing what it needs to work. I thought the newest computers were designed to work without floppy drives and often don't have support for them anyway (my motherboard has the support for the FD, but can I get by without it?), I know that at one point the XP install asks for a floppy containing 3d party drivers, but is it possible to use something like a flash drive with a disk image, or something similar? -- little nemo in slumberland
Guest Pegasus \(MVP\) Posted September 24, 2008 Posted September 24, 2008 Re: XP Install Catch-22 "littlenemo" <littlenemo@discussions.microsoft.com> wrote in message news:E0048C79-86AE-46F5-95CC-C915DA1EC50B@microsoft.com... > I'm ;not exactly a newbie, but I'm kind of stupid regarding some things, > so > please bear with me. I'm planning to install WindowsXP SP2 on some new > hardware with clean (unformatted, SATA) drives. The motherboard is an > Abit > AB9 Quad GT which will have an Intel Core2 quad processor. The logistics > have me a little puzzled. I'm not sure if I have what I need to get > through > the installation without problems. My hard drive will be a SATA drive. > At > this point, I don't have any floppy drive (not sure if I need one). I > have > only an LG SATA DVD ROM optical drive. I know the motherboard supports > SATA > drives, but I'm pretty sure I need some software drivers as well. I've > heard > that XP didn't support SATA, but I'm not sure exactly what that meant. > The > Abit motherboard came with a CD ROM which looks like it has SATA drivers > on > it. I suppose I can't very well use the optical drive for installation of > XP > unless the SATA drivers are loaded. Similarly, I can't use it to load the > motherboard drivers either, since the SATA DVD ROM is the only means I > have > to access both the Abit CD and the XP CD. Can anybody suggest a neat > solution to this problem? Kind of a catch-22 or a paradox. I need the > SATA > optical drive to access the Abit CD and the XP CD but it won't work > without > first accessing a CD containing what it needs to work. I thought the > newest > computers were designed to work without floppy drives and often don't have > support for them anyway (my motherboard has the support for the FD, but > can I > get by without it?), I know that at one point the XP install asks for a > floppy containing 3d party drivers, but is it possible to use something > like > a flash drive with a disk image, or something similar? > -- > little nemo in slumberland Not AFAIK. Get yourself a floppy disk drive (second-hand if necessary) and connect it during the installation phase.
Guest John7 Posted September 24, 2008 Posted September 24, 2008 Re: XP Install Catch-22 Hi, If supported, set your BIOS to IDE translated SATA access. Term depends on BIOS brand. This mode emulates an IDE controller to access SATA drives. Make sure drive is attached to main chipset (Northbridge / Southbridge), not an additional driver chip. Install Win XP as usual. Install SATA drivers for main chipset. Reboot, enter BIOS, change IDE translated SATA access mode to SATA or AHCI.. Again, term depends on BIOS brand. Save & reboot. Windows should boot and use SATA-drivers. If you get STOP 0x0000007B BSOD error (boot device missing) the trick won't work. Then you have 3 options. 1) Revert the BIOS setting to IDE translated SATA access and stick with it. You will have slightly less performance because you cannot use SATA advanced feature). 2) Get/borrow a floppy drive, write the SATA-drivers to the floppy, start Windows install and press F6 to load additional drivers. Certain Sony USB floppy drives are also supported. 3) Prepare a slipstreamed Windows install CD including the SATA drivers. I cannot tell exactly how but probably some else can kick in here if required. HTH, John7 "littlenemo" <littlenemo@discussions.microsoft.com> schreef in bericht news:E0048C79-86AE-46F5-95CC-C915DA1EC50B@microsoft.com... > I'm ;not exactly a newbie, but I'm kind of stupid regarding some things, > so > please bear with me. I'm planning to install WindowsXP SP2 on some new > hardware with clean (unformatted, SATA) drives. The motherboard is an > Abit > AB9 Quad GT which will have an Intel Core2 quad processor. The logistics > have me a little puzzled. I'm not sure if I have what I need to get > through > the installation without problems. My hard drive will be a SATA drive. > At > this point, I don't have any floppy drive (not sure if I need one). I > have > only an LG SATA DVD ROM optical drive. I know the motherboard supports > SATA > drives, but I'm pretty sure I need some software drivers as well. I've > heard > that XP didn't support SATA, but I'm not sure exactly what that meant. > The > Abit motherboard came with a CD ROM which looks like it has SATA drivers > on > it. I suppose I can't very well use the optical drive for installation of > XP > unless the SATA drivers are loaded. Similarly, I can't use it to load the > motherboard drivers either, since the SATA DVD ROM is the only means I > have > to access both the Abit CD and the XP CD. Can anybody suggest a neat > solution to this problem? Kind of a catch-22 or a paradox. I need the > SATA > optical drive to access the Abit CD and the XP CD but it won't work > without > first accessing a CD containing what it needs to work. I thought the > newest > computers were designed to work without floppy drives and often don't have > support for them anyway (my motherboard has the support for the FD, but > can I > get by without it?), I know that at one point the XP install asks for a > floppy containing 3d party drivers, but is it possible to use something > like > a flash drive with a disk image, or something similar? > -- > little nemo in slumberland
Recommended Posts