Guest Lars Posted September 24, 2008 Posted September 24, 2008 I have been looking all around on the internet to find a solution to this problem I’m writing you about. ISSUE: - This is an example: When a user is using Word and then their internet line cuts out for some reason. They logon to the system again. Open word to recover their document. But no recovery information is shown. I think this must be because the recovery info is not saved to the roaming profile. This means that whenever a user have a connection loss or something that happens so that the user is thrown of our system. They cannot get the auto recover info. This is quite annoying. Is there a way to solve this. So that office auto recover info is saved to the roaming profile or should we just change the GPO settings for the auto recover folder? Technical info: - TSE System: Citrix & Win2k3 TSE’s. - Office: 2007 SP1. If you need more info please let me know. Or if you can redirect me to a forum or a website where I can find a solution or info on this that’s great as well. Thank you very much.
Guest Lars Posted October 2, 2008 Posted October 2, 2008 RE: TSE & Romaing profiles. Saving Office Autorecover info to roaming Anyone with an answer to this? "Lars" wrote: > I have been looking all around on the internet to find a solution to this > problem I’m writing you about. > > ISSUE: > > - This is an example: When a user is using Word and then their > internet line cuts out for some reason. > They logon to the system again. Open word to recover their document. But no > recovery information is shown. > I think this must be because the recovery info is not saved to the roaming > profile. This means that whenever a user have a connection loss or something > that happens so that the user is thrown of our system. They cannot get the > auto recover info. > > This is quite annoying. > > Is there a way to solve this. So that office auto recover info is saved to > the roaming profile or should we just change the GPO settings for the auto > recover folder? > > Technical info: > > - TSE System: Citrix & Win2k3 TSE’s. > - Office: 2007 SP1. > > If you need more info please let me know. Or if you can redirect me to a > forum or a website where I can find a solution or info on this that’s great > as well. > > Thank you very much.
Guest jolteroli Posted October 2, 2008 Posted October 2, 2008 Re: TSE & Romaing profiles. Saving Office Autorecover info to roaming hi Lars "Lars" <Lars@discussions.microsoft.com> schrieb im Newsbeitrag news:55F9CF2A-8B4B-4EC4-A498-8F5059862F7F@microsoft.com... > Anyone with an answer to this? > > "Lars" wrote: > >> I have been looking all around on the internet to find a solution to this >> problem I’m writing you about. >> >> ISSUE: >> >> - This is an example: When a user is using Word and then their >> internet line cuts out for some reason. then, the session should go into "disconnected" state and stay alive on the server. >> They logon to the system again. Open word to recover their document. But >> no >> recovery information is shown. even when you have allowed "multiple sessions per user", the user should pickup the old disconnected session. >> I think this must be because the recovery info is not saved to the >> roaming >> profile. This means that whenever a user have a connection loss or >> something >> that happens so that the user is thrown of our system. They cannot get >> the >> auto recover info. i don't use office, but i've observered office keeps a temporary file with the prefix $~. may be this is the recovery info, dunno... there is somewhere an option in word, to "auto save" the document in a time interval. set it to 1 minute...? >> This is quite annoying. >> >> Is there a way to solve this. So that office auto recover info is saved >> to >> the roaming profile or should we just change the GPO settings for the >> auto >> recover folder? i would suggest, you get the server to "not kill disconnected sessions", so the user can reconnect and just continue working fine. though still annoying, but the work isn't lost! -jolt
Guest Lars Posted October 3, 2008 Posted October 3, 2008 Re: TSE & Romaing profiles. Saving Office Autorecover info to roam Re: TSE & Romaing profiles. Saving Office Autorecover info to roam Thank you for your answer jo lteroli. Yes the sessions goes into disconnected state but if the user does not try to reconnect for about 10 to 15 minutes the session is disconnected. And then when the user connects they are directed to a new server. And sometimes they are not able to get reconnected to a disconnect session because Citrix does not see the user as disconnected. Office is set to autosave every 5 minutes. This works fine. But the information from Office, that autosave recovery info have been saved is not being saved into the users romaing profile. And therefore Office does not prompt the user about available recovered documents when they start an Office program when they are on a new TSE. Anyone with other suggestions. "jolteroli" wrote: > hi Lars > > "Lars" <Lars@discussions.microsoft.com> schrieb im Newsbeitrag > news:55F9CF2A-8B4B-4EC4-A498-8F5059862F7F@microsoft.com... > > Anyone with an answer to this? > > > > "Lars" wrote: > > > >> I have been looking all around on the internet to find a solution to this > >> problem I’m writing you about. > >> > >> ISSUE: > >> > >> - This is an example: When a user is using Word and then their > >> internet line cuts out for some reason. > > then, the session should go into "disconnected" state and stay alive on the > server. > > >> They logon to the system again. Open word to recover their document. But > >> no > >> recovery information is shown. > > even when you have allowed "multiple sessions per user", the user should > pickup the old disconnected session. > > >> I think this must be because the recovery info is not saved to the > >> roaming > >> profile. This means that whenever a user have a connection loss or > >> something > >> that happens so that the user is thrown of our system. They cannot get > >> the > >> auto recover info. > > i don't use office, but i've observered office keeps a temporary file with > the prefix $~. may be this is the recovery info, dunno... there is somewhere > an option in word, to "auto save" the document in a time interval. set it to > 1 minute...? > > >> This is quite annoying. > >> > >> Is there a way to solve this. So that office auto recover info is saved > >> to > >> the roaming profile or should we just change the GPO settings for the > >> auto > >> recover folder? > > i would suggest, you get the server to "not kill disconnected sessions", so > the user can reconnect and just continue working fine. though still > annoying, but the work isn't lost! > > -jolt > >
Guest Lars Posted October 14, 2008 Posted October 14, 2008 Re: TSE & Romaing profiles. Saving Office Autorecover info to roam Re: TSE & Romaing profiles. Saving Office Autorecover info to roam Any new suggestions? "Lars" wrote: > Thank you for your answer jo lteroli. > > Yes the sessions goes into disconnected state but if the user does not try > to reconnect for about 10 to 15 minutes the session is disconnected. > And then when the user connects they are directed to a new server. > > And sometimes they are not able to get reconnected to a disconnect session > because Citrix does not see the user as disconnected. > > Office is set to autosave every 5 minutes. This works fine. But the > information from Office, that autosave recovery info have been saved is not > being saved into the users romaing profile. And therefore Office does not > prompt the user about available recovered documents when they start an Office > program when they are on a new TSE. > > Anyone with other suggestions. > > "jolteroli" wrote: > > > hi Lars > > > > "Lars" <Lars@discussions.microsoft.com> schrieb im Newsbeitrag > > news:55F9CF2A-8B4B-4EC4-A498-8F5059862F7F@microsoft.com... > > > Anyone with an answer to this? > > > > > > "Lars" wrote: > > > > > >> I have been looking all around on the internet to find a solution to this > > >> problem I’m writing you about. > > >> > > >> ISSUE: > > >> > > >> - This is an example: When a user is using Word and then their > > >> internet line cuts out for some reason. > > > > then, the session should go into "disconnected" state and stay alive on the > > server. > > > > >> They logon to the system again. Open word to recover their document. But > > >> no > > >> recovery information is shown. > > > > even when you have allowed "multiple sessions per user", the user should > > pickup the old disconnected session. > > > > >> I think this must be because the recovery info is not saved to the > > >> roaming > > >> profile. This means that whenever a user have a connection loss or > > >> something > > >> that happens so that the user is thrown of our system. They cannot get > > >> the > > >> auto recover info. > > > > i don't use office, but i've observered office keeps a temporary file with > > the prefix $~. may be this is the recovery info, dunno... there is somewhere > > an option in word, to "auto save" the document in a time interval. set it to > > 1 minute...? > > > > >> This is quite annoying. > > >> > > >> Is there a way to solve this. So that office auto recover info is saved > > >> to > > >> the roaming profile or should we just change the GPO settings for the > > >> auto > > >> recover folder? > > > > i would suggest, you get the server to "not kill disconnected sessions", so > > the user can reconnect and just continue working fine. though still > > annoying, but the work isn't lost! > > > > -jolt > > > >
Recommended Posts