Guest Stan Hilliard Posted September 26, 2008 Posted September 26, 2008 At startup of XP Pro SP2 I got the following message: ==== "When I boot up my PC get an error message 'Windows could not start because the following file is missing or corrupt Windows\AppPatch\drvmain.sdb You can attempt to repair this file by starting windows set up using original set up CD-ROM. Select r on the first screen to start repair." ==== If I shutdown and restart the computer it often starts but startup takes a long time. Before the slow startup or the failure-with-message there is a large band across the bottom of the screen that looks kind of like barcode and like a progress bar. I recently tried to install SP3 and got an access denied error followed by the running of an uninstall wizard. What is happening and what is my best course of action? Help will be appreciated, Stan Hilliard
Guest MowGreen [MVP] Posted September 26, 2008 Posted September 26, 2008 Re: Startup failed with appmain.sdb See the last post on this page by 'rogue_red': http://x220.minasi.com/forum/topic.asp?TOPIC_ID=14216 MowGreen [MVP 2003-2008] =============== *-343-* FDNY Never Forgotten =============== Stan Hilliard wrote: > At startup of XP Pro SP2 I got the following message: > > ==== > "When I boot up my PC get an error message 'Windows could not start > because the following file is missing or corrupt > Windows\AppPatch\drvmain.sdb > You can attempt to repair this file by starting windows set up using > original set up CD-ROM. Select r on the first screen to start repair." > ==== > > If I shutdown and restart the computer it often starts but startup > takes a long time. > > Before the slow startup or the failure-with-message there is a large > band across the bottom of the screen that looks kind of like barcode > and like a progress bar. > > I recently tried to install SP3 and got an access denied error > followed by the running of an uninstall wizard. > > What is happening and what is my best course of action? > > Help will be appreciated, > Stan Hilliard
Guest nass Posted September 26, 2008 Posted September 26, 2008 RE: Startup failed with appmain.sdb "Stan Hilliard" wrote: > At startup of XP Pro SP2 I got the following message: > > ==== > "When I boot up my PC get an error message 'Windows could not start > because the following file is missing or corrupt > Windows\AppPatch\drvmain.sdb > You can attempt to repair this file by starting windows set up using > original set up CD-ROM. Select r on the first screen to start repair." > ==== > > If I shutdown and restart the computer it often starts but startup > takes a long time. > > Before the slow startup or the failure-with-message there is a large > band across the bottom of the screen that looks kind of like barcode > and like a progress bar. > > I recently tried to install SP3 and got an access denied error > followed by the running of an uninstall wizard. > > What is happening and what is my best course of action? > > Help will be appreciated, > Stan Hilliard > - Any New Hardware/software installed recently? - Have a look in the Device manager and see if there is /are malfunctioing devices or Conflict in IRQs - Did you scan for malware and visruese with an upd2date anti-viru and anti-malware applications? -How old is the machine? - Open a run command and type in: sfc /scannow click [OK] Note you will need your XP CD Installation media handy if the SFC asked you! How to configure Windows XP to start in a "clean boot" state http://support.microsoft.com/kb/310353 If that doesn't help, a repair/reinstall may be in order: http://support.microsoft.com/default...b;en-us;315341 HTH, nass --- http://www.nasstec.co.uk
Guest Stan Hilliard Posted September 27, 2008 Posted September 27, 2008 Re: Startup failed with appmain.sdb On Fri, 26 Sep 2008 13:40:09 -0700, nass <nass@discussions.microsoft.com> wrote: >"Stan Hilliard" wrote: > >> At startup of XP Pro SP2 I got the following message: >> >> ==== >> "When I boot up my PC get an error message 'Windows could not start >> because the following file is missing or corrupt >> Windows\AppPatch\drvmain.sdb >> You can attempt to repair this file by starting windows set up using >> original set up CD-ROM. Select r on the first screen to start repair." >> ==== >> >> If I shutdown and restart the computer it often starts but startup >> takes a long time. >> >> Before the slow startup or the failure-with-message there is a large >> band across the bottom of the screen that looks kind of like barcode >> and like a progress bar. >> >> I recently tried to install SP3 and got an access denied error >> followed by the running of an uninstall wizard. >> >> What is happening and what is my best course of action? >> >> Help will be appreciated, >> Stan Hilliard >- Any New Hardware/software installed recently? You reminded me that yesterday I was having trouble with a program message that running out of memory. I have 2G RAM. I increased the virtual memory manually: Initial size 2046 -->3069 MB Final size 4092 --> 5116 MB That did not solve the program's problem so I don't think the page file size was wrong to begin with. Another question before I undo that change. I have 6 partitions: C: to H:. The paging file is on partition F: as custom size. Partition F: has 9956 MB available and it is on the same HDD as C:. Partitions D:,E:,G:, and H: are set to "no paging file". But C: is set to "System Managed Size" with no size shown. Does this mean that I currently have two paging files? Partition C: has room for 29,596 MB. I started to set C: to "no paging file" but got a warning about possible trouble getting debugging information if a stop error occurs -- so I left the setting as it was. Could I be having a problem with the paging file(s)? Do I have a problem with this setup? Should I the paging file setting on partition F: back to the way it was, or to let the system manage the size? Stan Hilliard >- Have a look in the Device manager and see if there is /are malfunctioing >devices or Conflict in IRQs >- Did you scan for malware and visruese with an upd2date anti-viru and >anti-malware applications? >-How old is the machine? >- Open a run command and type in: >sfc /scannow click [OK] >Note you will need your XP CD Installation media handy if the SFC asked you! > >How to configure Windows XP to start in a "clean boot" state >http://support.microsoft.com/kb/310353 > >If that doesn't help, a repair/reinstall may be in order: >http://support.microsoft.com/default...b;en-us;315341 > >HTH, >nass >--- >http://www.nasstec.co.uk >
Guest Stan Hilliard Posted September 27, 2008 Posted September 27, 2008 Re: Startup failed with appmain.sdb On Sat, 27 Sep 2008 00:37:13 -0500, Stan Hilliard <usenetreplyMS@samplingplansNOTSPAM.com> wrote: >On Fri, 26 Sep 2008 13:40:09 -0700, nass ><nass@discussions.microsoft.com> wrote: >>"Stan Hilliard" wrote: >> >>> At startup of XP Pro SP2 I got the following message: >>> >>> ==== >>> "When I boot up my PC get an error message 'Windows could not start >>> because the following file is missing or corrupt >>> Windows\AppPatch\drvmain.sdb >>> You can attempt to repair this file by starting windows set up using >>> original set up CD-ROM. Select r on the first screen to start repair." >>> ==== >>> >>> If I shutdown and restart the computer it often starts but startup >>> takes a long time. >>> >>> Before the slow startup or the failure-with-message there is a large >>> band across the bottom of the screen that looks kind of like barcode >>> and like a progress bar. >>> >>> I recently tried to install SP3 and got an access denied error >>> followed by the running of an uninstall wizard. >>> >>> What is happening and what is my best course of action? >>> >>> Help will be appreciated, >>> Stan Hilliard > >>- Any New Hardware/software installed recently? > >You reminded me that yesterday I was having trouble with a program >message that running out of memory. I have 2G RAM. I increased the >virtual memory manually: >Initial size 2046 -->3069 MB >Final size 4092 --> 5116 MB >That did not solve the program's problem so I don't think the page >file size was wrong to begin with. > >Another question before I undo that change. > >I have 6 partitions: C: to H:. The paging file is on partition F: as >custom size. Partition F: has 9956 MB available and it is on the same >HDD as C:. CORRECTION: Partition F: is NOT on the same HDD as C:. Partition C: is on a 500 GB RAID 0 whereas F: is on a 250 GB non-raid drive. >Partitions D:,E:,G:, and H: are set to "no paging file". But C: is set >to "System Managed Size" with no size shown. Does this mean that I >currently have two paging files? > >Partition C: has room for 29,596 MB. I started to set C: to "no paging >file" but got a warning about possible trouble getting debugging >information if a stop error occurs -- so I left the setting as it was. > >Could I be having a problem with the paging file(s)? Do I have a >problem with this setup? Should I the paging file setting on partition >F: back to the way it was, or to let the system manage the size? >Stan Hilliard > >>- Have a look in the Device manager and see if there is /are malfunctioing >>devices or Conflict in IRQs >>- Did you scan for malware and visruese with an upd2date anti-viru and >>anti-malware applications? >>-How old is the machine? >>- Open a run command and type in: >>sfc /scannow click [OK] >>Note you will need your XP CD Installation media handy if the SFC asked you! >> >>How to configure Windows XP to start in a "clean boot" state >>http://support.microsoft.com/kb/310353 >> >>If that doesn't help, a repair/reinstall may be in order: >>http://support.microsoft.com/default...b;en-us;315341 >> >>HTH, >>nass >>--- >>http://www.nasstec.co.uk >>
Guest nass Posted September 27, 2008 Posted September 27, 2008 Re: Startup failed with appmain.sdb Try to make Windows manage the page File on both Partitions and see if that will solve the issue. And also try the SFC on start up if there is dirty or bad sectors it will be corrected by the checker. HTH, Let us know your progress. nass "Stan Hilliard" wrote: > On Sat, 27 Sep 2008 00:37:13 -0500, Stan Hilliard > <usenetreplyMS@samplingplansNOTSPAM.com> wrote: > > >On Fri, 26 Sep 2008 13:40:09 -0700, nass > ><nass@discussions.microsoft.com> wrote: > >>"Stan Hilliard" wrote: > >> > >>> At startup of XP Pro SP2 I got the following message: > >>> > >>> ==== > >>> "When I boot up my PC get an error message 'Windows could not start > >>> because the following file is missing or corrupt > >>> Windows\AppPatch\drvmain.sdb > >>> You can attempt to repair this file by starting windows set up using > >>> original set up CD-ROM. Select r on the first screen to start repair." > >>> ==== > >>> > >>> If I shutdown and restart the computer it often starts but startup > >>> takes a long time. > >>> > >>> Before the slow startup or the failure-with-message there is a large > >>> band across the bottom of the screen that looks kind of like barcode > >>> and like a progress bar. > >>> > >>> I recently tried to install SP3 and got an access denied error > >>> followed by the running of an uninstall wizard. > >>> > >>> What is happening and what is my best course of action? > >>> > >>> Help will be appreciated, > >>> Stan Hilliard > > > >>- Any New Hardware/software installed recently? > > > >You reminded me that yesterday I was having trouble with a program > >message that running out of memory. I have 2G RAM. I increased the > >virtual memory manually: > >Initial size 2046 -->3069 MB > >Final size 4092 --> 5116 MB > >That did not solve the program's problem so I don't think the page > >file size was wrong to begin with. > > > >Another question before I undo that change. > > > >I have 6 partitions: C: to H:. The paging file is on partition F: as > >custom size. Partition F: has 9956 MB available and it is on the same > >HDD as C:. > > CORRECTION: Partition F: is NOT on the same HDD as C:. Partition C: is > on a 500 GB RAID 0 whereas F: is on a 250 GB non-raid drive. > > >Partitions D:,E:,G:, and H: are set to "no paging file". But C: is set > >to "System Managed Size" with no size shown. Does this mean that I > >currently have two paging files? > > > >Partition C: has room for 29,596 MB. I started to set C: to "no paging > >file" but got a warning about possible trouble getting debugging > >information if a stop error occurs -- so I left the setting as it was. > > > >Could I be having a problem with the paging file(s)? Do I have a > >problem with this setup? Should I the paging file setting on partition > >F: back to the way it was, or to let the system manage the size? > >Stan Hilliard > > > >>- Have a look in the Device manager and see if there is /are malfunctioing > >>devices or Conflict in IRQs > >>- Did you scan for malware and visruese with an upd2date anti-viru and > >>anti-malware applications? > >>-How old is the machine? > >>- Open a run command and type in: > >>sfc /scannow click [OK] > >>Note you will need your XP CD Installation media handy if the SFC asked you! > >> > >>How to configure Windows XP to start in a "clean boot" state > >>http://support.microsoft.com/kb/310353 > >> > >>If that doesn't help, a repair/reinstall may be in order: > >>http://support.microsoft.com/default...b;en-us;315341 > >> > >>HTH, > >>nass > >>--- > >>http://www.nasstec.co.uk > >> > >
Guest Stan Hilliard Posted September 27, 2008 Posted September 27, 2008 Re: Startup failed with appmain.sdb On Sat, 27 Sep 2008 13:02:01 -0700, nass <nass@discussions.microsoft.com> wrote: >Try to make Windows manage the page File on both Partitions and see if that >will solve the issue. I changed partition F: to let windows manage the page file. Now both C: and F: are that way. The PC booted OK. The startup hang did not occur every time before so I will need to reboot several times before being sure. No problems indicated in device manager, but the system froze when I tried to close the device manager window. Manual shutdown. Startup was fast. Device Manager closed OK this time. >And also try the SFC on start up if there is dirty or bad sectors it will be >corrected by the checker. I can't find my XP-Pro CD right now. (It's around here somewhere.) Will SFC diagnose without it? Stan Hilliard >HTH, >Let us know your progress. >nass > >"Stan Hilliard" wrote: > >> On Sat, 27 Sep 2008 00:37:13 -0500, Stan Hilliard >> <usenetreplyMS@samplingplansNOTSPAM.com> wrote: >> >> >On Fri, 26 Sep 2008 13:40:09 -0700, nass >> ><nass@discussions.microsoft.com> wrote: >> >>"Stan Hilliard" wrote: >> >> >> >>> At startup of XP Pro SP2 I got the following message: >> >>> >> >>> ==== >> >>> "When I boot up my PC get an error message 'Windows could not start >> >>> because the following file is missing or corrupt >> >>> Windows\AppPatch\drvmain.sdb >> >>> You can attempt to repair this file by starting windows set up using >> >>> original set up CD-ROM. Select r on the first screen to start repair." >> >>> ==== >> >>> >> >>> If I shutdown and restart the computer it often starts but startup >> >>> takes a long time. >> >>> >> >>> Before the slow startup or the failure-with-message there is a large >> >>> band across the bottom of the screen that looks kind of like barcode >> >>> and like a progress bar. >> >>> >> >>> I recently tried to install SP3 and got an access denied error >> >>> followed by the running of an uninstall wizard. >> >>> >> >>> What is happening and what is my best course of action? >> >>> >> >>> Help will be appreciated, >> >>> Stan Hilliard >> > >> >>- Any New Hardware/software installed recently? >> > >> >You reminded me that yesterday I was having trouble with a program >> >message that running out of memory. I have 2G RAM. I increased the >> >virtual memory manually: >> >Initial size 2046 -->3069 MB >> >Final size 4092 --> 5116 MB >> >That did not solve the program's problem so I don't think the page >> >file size was wrong to begin with. >> > >> >Another question before I undo that change. >> > >> >I have 6 partitions: C: to H:. The paging file is on partition F: as >> >custom size. Partition F: has 9956 MB available and it is on the same >> >HDD as C:. >> >> CORRECTION: Partition F: is NOT on the same HDD as C:. Partition C: is >> on a 500 GB RAID 0 whereas F: is on a 250 GB non-raid drive. >> >> >Partitions D:,E:,G:, and H: are set to "no paging file". But C: is set >> >to "System Managed Size" with no size shown. Does this mean that I >> >currently have two paging files? >> > >> >Partition C: has room for 29,596 MB. I started to set C: to "no paging >> >file" but got a warning about possible trouble getting debugging >> >information if a stop error occurs -- so I left the setting as it was. >> > >> >Could I be having a problem with the paging file(s)? Do I have a >> >problem with this setup? Should I the paging file setting on partition >> >F: back to the way it was, or to let the system manage the size? >> >Stan Hilliard >> > >> >>- Have a look in the Device manager and see if there is /are malfunctioing >> >>devices or Conflict in IRQs >> >>- Did you scan for malware and visruese with an upd2date anti-viru and >> >>anti-malware applications? >> >>-How old is the machine? >> >>- Open a run command and type in: >> >>sfc /scannow click [OK] >> >>Note you will need your XP CD Installation media handy if the SFC asked you! >> >> >> >>How to configure Windows XP to start in a "clean boot" state >> >>http://support.microsoft.com/kb/310353 >> >> >> >>If that doesn't help, a repair/reinstall may be in order: >> >>http://support.microsoft.com/default...b;en-us;315341 >> >> >> >>HTH, >> >>nass >> >>--- >> >>http://www.nasstec.co.uk >> >> >> >>
Guest Stan Hilliard Posted September 29, 2008 Posted September 29, 2008 Re: Startup failed with appmain.sdb On Sat, 27 Sep 2008 16:52:53 -0500, Stan Hilliard <usenetreplyMS@samplingplansNOTSPAM.com> wrote: >On Sat, 27 Sep 2008 13:02:01 -0700, nass ><nass@discussions.microsoft.com> wrote: >>Try to make Windows manage the page File on both Partitions and see if that >>will solve the issue. > >I changed partition F: to let windows manage the page file. Now both >C: and F: are that way. The PC booted OK. The startup hang did not >occur every time before so I will need to reboot several times before >being sure. > >No problems indicated in device manager, but the system froze when I >tried to close the device manager window. > >Manual shutdown. Startup was fast. Device Manager closed OK this time. There were several more freeze-ups -- at the end of an Ad-Aware run and at the end of an F-Prot run. Also it would be frozen after switching to power saving mode. I noticed that Ad-Watch was running a lot so I prevented it from starting at PC startup. I also set the PC to not switch to energy saving. This might have fixed the problem, but I'm not sure. >>And also try the SFC on start up if there is dirty or bad sectors it will be >>corrected by the checker. >>HTH, >>Let us know your progress. >>nass >I can't find my XP-Pro CD right now. (It's around here somewhere.) >Will SFC diagnose without it? >Stan Hilliard I found my XP-Pro SP2 CDROM and ran SFC. There was a lot of CD reading and I had to push the [retry] button four times. So far so good. I will try to re-institute power saving and Ad-Watch in small steps. Q1 -- Is it a good idea to copy I386 from CD to C:\ as per the link? Q2 -- How would that effect possible future installation of SP3? Q3 -- Is it good practice to run SFC periodically? Thanks for the help. Stan Hilliard >>"Stan Hilliard" wrote: >> >>> On Sat, 27 Sep 2008 00:37:13 -0500, Stan Hilliard >>> <usenetreplyMS@samplingplansNOTSPAM.com> wrote: >>> >>> >On Fri, 26 Sep 2008 13:40:09 -0700, nass >>> ><nass@discussions.microsoft.com> wrote: >>> >>"Stan Hilliard" wrote: >>> >> >>> >>> At startup of XP Pro SP2 I got the following message: >>> >>> >>> >>> ==== >>> >>> "When I boot up my PC get an error message 'Windows could not start >>> >>> because the following file is missing or corrupt >>> >>> Windows\AppPatch\drvmain.sdb >>> >>> You can attempt to repair this file by starting windows set up using >>> >>> original set up CD-ROM. Select r on the first screen to start repair." >>> >>> ==== >>> >>> >>> >>> If I shutdown and restart the computer it often starts but startup >>> >>> takes a long time. >>> >>> >>> >>> Before the slow startup or the failure-with-message there is a large >>> >>> band across the bottom of the screen that looks kind of like barcode >>> >>> and like a progress bar. >>> >>> >>> >>> I recently tried to install SP3 and got an access denied error >>> >>> followed by the running of an uninstall wizard. >>> >>> >>> >>> What is happening and what is my best course of action? >>> >>> >>> >>> Help will be appreciated, >>> >>> Stan Hilliard >>> > >>> >>- Any New Hardware/software installed recently? >>> > >>> >You reminded me that yesterday I was having trouble with a program >>> >message that running out of memory. I have 2G RAM. I increased the >>> >virtual memory manually: >>> >Initial size 2046 -->3069 MB >>> >Final size 4092 --> 5116 MB >>> >That did not solve the program's problem so I don't think the page >>> >file size was wrong to begin with. >>> > >>> >Another question before I undo that change. >>> > >>> >I have 6 partitions: C: to H:. The paging file is on partition F: as >>> >custom size. Partition F: has 9956 MB available and it is on the same >>> >HDD as C:. >>> >>> CORRECTION: Partition F: is NOT on the same HDD as C:. Partition C: is >>> on a 500 GB RAID 0 whereas F: is on a 250 GB non-raid drive. >>> >>> >Partitions D:,E:,G:, and H: are set to "no paging file". But C: is set >>> >to "System Managed Size" with no size shown. Does this mean that I >>> >currently have two paging files? >>> > >>> >Partition C: has room for 29,596 MB. I started to set C: to "no paging >>> >file" but got a warning about possible trouble getting debugging >>> >information if a stop error occurs -- so I left the setting as it was. >>> > >>> >Could I be having a problem with the paging file(s)? Do I have a >>> >problem with this setup? Should I the paging file setting on partition >>> >F: back to the way it was, or to let the system manage the size? >>> >Stan Hilliard >>> > >>> >>- Have a look in the Device manager and see if there is /are malfunctioing >>> >>devices or Conflict in IRQs >>> >>- Did you scan for malware and visruese with an upd2date anti-viru and >>> >>anti-malware applications? >>> >>-How old is the machine? >>> >>- Open a run command and type in: >>> >>sfc /scannow click [OK] >>> >>Note you will need your XP CD Installation media handy if the SFC asked you! >>> >> >>> >>How to configure Windows XP to start in a "clean boot" state >>> >>http://support.microsoft.com/kb/310353 >>> >> >>> >>If that doesn't help, a repair/reinstall may be in order: >>> >>http://support.microsoft.com/default...b;en-us;315341 >>> >> >>> >>HTH, >>> >>nass >>> >>--- >>> >>http://www.nasstec.co.uk >>> >> >>> >>>
Recommended Posts