Guest Neil Harrington Posted September 29, 2008 Posted September 29, 2008 The system, a recent build, is as follows: Biostar TF7025-M2 (aka N68SA-M2T) GeForce 7025/NF630a chipset Athlon 64 X2 3600+ 2 GB DDR2 Nvidia GeForce 8600 GT WD 160GB hard drive WinXP Home v.2002 updated to SP3 Whenever I try to go into standby, I get the message "preparing to stand by ..." but the system just hangs. Changing standby in the BIOS from S1 to S3 makes no difference. I've enabled hibernation in Power Options but that doesn't work either. When I try to go into hibernation I just get "preparing to hibernate ..." and the system hangs again. Everything in the power management section of BIOS looks okay to me, the system has been doing this since it was all defaults and I don't see anything there likely to change it. So it looks like a Windows problem. I found that Microsoft has a hotfix for this problem here: http://support.microsoft.com/kb/952117 This replaces the ndis.sys and ndiswan.sys files with newer versions (different versions for SP2 and SP3). I downloaded and ran it, it replaced the files all right but only made things a little worse -- gave me a blue screen stop error when I tried standby in S1 mode. In S3 and S4 (hibernate) it just hung the computer as before. So I restored the original files. Can anyone help?
Guest Thee Chicago Wolf Posted September 29, 2008 Posted September 29, 2008 Re: WinXP SP3 system hangs on standby or hibernate >The system, a recent build, is as follows: > >Biostar TF7025-M2 (aka N68SA-M2T) > GeForce 7025/NF630a chipset >Athlon 64 X2 3600+ >2 GB DDR2 >Nvidia GeForce 8600 GT >WD 160GB hard drive >WinXP Home v.2002 updated to SP3 > >Whenever I try to go into standby, I get the message "preparing to >stand by ..." but the system just hangs. > >Changing standby in the BIOS from S1 to S3 makes no difference. > >I've enabled hibernation in Power Options but that doesn't work either. When >I try to go into hibernation I just get "preparing to hibernate ..." and the >system hangs again. > >Everything in the power management section of BIOS looks okay to me, the >system has been doing this since it was all defaults and I don't see >anything there likely to change it. So it looks like a Windows problem. > >I found that Microsoft has a hotfix for this problem here: > >http://support.microsoft.com/kb/952117 > >This replaces the ndis.sys and ndiswan.sys files with newer versions >(different versions for SP2 and SP3). I downloaded and ran it, it replaced >the files all right but only made things a little worse -- gave me a blue >screen stop error when I tried standby in S1 mode. In S3 and S4 (hibernate) >it just hung the computer as before. So I restored the original files. > >Can anyone help? Is the BIOS up to date? Are you running the N68SM823 version? Have you updated to the nForce drivers version 15.24 yet? http://www.nvidia.com/object/nforce_winxp_15.24.html - Thee Chicago Wolf
Guest Neil Harrington Posted September 29, 2008 Posted September 29, 2008 Re: WinXP SP3 system hangs on standby or hibernate "Thee Chicago Wolf" <.@.> wrote in message news:cgk1e4ps8vgqlm8ho06dob1cre3fkdivch@4ax.com... > >The system, a recent build, is as follows: >> >>Biostar TF7025-M2 (aka N68SA-M2T) >> GeForce 7025/NF630a chipset >>Athlon 64 X2 3600+ >>2 GB DDR2 >>Nvidia GeForce 8600 GT >>WD 160GB hard drive >>WinXP Home v.2002 updated to SP3 >> >>Whenever I try to go into standby, I get the message "preparing to >>stand by ..." but the system just hangs. >> >>Changing standby in the BIOS from S1 to S3 makes no difference. >> >>I've enabled hibernation in Power Options but that doesn't work either. >>When >>I try to go into hibernation I just get "preparing to hibernate ..." and >>the >>system hangs again. >> >>Everything in the power management section of BIOS looks okay to me, the >>system has been doing this since it was all defaults and I don't see >>anything there likely to change it. So it looks like a Windows problem. >> >>I found that Microsoft has a hotfix for this problem here: >> >>http://support.microsoft.com/kb/952117 >> >>This replaces the ndis.sys and ndiswan.sys files with newer versions >>(different versions for SP2 and SP3). I downloaded and ran it, it replaced >>the files all right but only made things a little worse -- gave me a blue >>screen stop error when I tried standby in S1 mode. In S3 and S4 >>(hibernate) >>it just hung the computer as before. So I restored the original files. >> >>Can anyone help? > > Is the BIOS up to date? Are you running the N68SM823 version? > Have you updated to the nForce drivers version 15.24 yet? > http://www.nvidia.com/object/nforce_winxp_15.24.html > > - Thee Chicago Wolf Thanks, I'll look into all that. As the motherboard is fairly new I doubt there's a newer BIOS (there wasn't the last time I looked), but I'm not sure the drivers are up to date. I read somewhere on the Microsoft site that bad USB drivers can cause this problem, though that wasn't a WinXP-related thing. Neil
Guest Thee Chicago Wolf Posted September 29, 2008 Posted September 29, 2008 Re: WinXP SP3 system hangs on standby or hibernate >Thanks, I'll look into all that. As the motherboard is fairly new I doubt >there's a newer BIOS (there wasn't the last time I looked), but I'm not sure >the drivers are up to date. I read somewhere on the Microsoft site that bad >USB drivers can cause this problem, though that wasn't a WinXP-related >thing. To narrow things down, start with the bottom and work on up is the best approach. Making sure the BIOS is up to date is where I always like to start and then move to current drivers, to patches, etc. Hotfixes should come in at the end. Have you already installed that hotfix for the hibernation issue? If not, at the top of the page is usually a link to request it (free). - Thee Chicago Wolf
Guest Neil Harrington Posted September 29, 2008 Posted September 29, 2008 Re: WinXP SP3 system hangs on standby or hibernate "Thee Chicago Wolf" <.@.> wrote in message news:2j32e4hj04ajhm460hthahtkhv3lr9nbhk@4ax.com... > >Thanks, I'll look into all that. As the motherboard is fairly new I doubt >>there's a newer BIOS (there wasn't the last time I looked), but I'm not >>sure >>the drivers are up to date. I read somewhere on the Microsoft site that >>bad >>USB drivers can cause this problem, though that wasn't a WinXP-related >>thing. > > To narrow things down, start with the bottom and work on up is the > best approach. Making sure the BIOS is up to date is where I always > like to start and then move to current drivers, to patches, etc. > Hotfixes should come in at the end. Have you already installed that > hotfix for the hibernation issue? If not, at the top of the page is > usually a link to request it (free). > > - Thee Chicago Wolf I think you're right, because on Biostar's site just now I see there is a new (9/18/08) BIOS with the description "Fixed S3 issue (Beta)." Unfortunately when I try to download it I get "The file is not exist." So it looks like they're still working on it and that presumably is the standby problem. My BIOS version is N68SA-M2T (from the BIOS screen) or 06/01/07-NF-MCP68-6A61MB01C-00 (from SiSoft Sandra). I don't see the N68SM823 version you mention listed for my motherboard on their site. But I just noticed they show only version 5.1 for this board while mine is version 5.0, according to Sandra. I wonder how much difference that makes . . . they don't show 5.0 at all. Yes, I did run the hotfix which replaced two files; all that got me was a blue screen error on S1 instead of just hanging, so I restored the original files. I guess I'll have to wait for Biostar to come up with a BIOS fix that works. In the meantime I'll install the nForce 15.24 drivers you linked to since I know my present ones are older. Neil
Guest PA Bear [MS MVP] Posted September 29, 2008 Posted September 29, 2008 Re: WinXP SP3 system hangs on standby or hibernate A Windows XP SP3-based computer loses wireless connectivity when it resumes from standby or from hibernation, or you receive an error message when you try to put the computer in standby or in hibernation: http://support.microsoft.com/kb/951447 Free unlimited installation and compatibility support is available for Windows XP, but only for Service Pack 3 (SP3), until 14 Apr-09. Chat and e-mail support is available only in the United States and Canada. Go to http://support.microsoft.com/oas/default.aspx?gprid=1173 | select "Windows XP" then select "Windows XP Service Pack 3" -- ~Robear Dyer (PA Bear) MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002 AumHa VSOP & Admin http://aumha.net DTS-L http://dts-l.net/ Neil Harrington wrote: > The system, a recent build, is as follows: > > Biostar TF7025-M2 (aka N68SA-M2T) > GeForce 7025/NF630a chipset > Athlon 64 X2 3600+ > 2 GB DDR2 > Nvidia GeForce 8600 GT > WD 160GB hard drive > WinXP Home v.2002 updated to SP3 > > Whenever I try to go into standby, I get the message "preparing to > stand by ..." but the system just hangs. > > Changing standby in the BIOS from S1 to S3 makes no difference. > > I've enabled hibernation in Power Options but that doesn't work either. > When > I try to go into hibernation I just get "preparing to hibernate ..." and > the > system hangs again. > > Everything in the power management section of BIOS looks okay to me, the > system has been doing this since it was all defaults and I don't see > anything there likely to change it. So it looks like a Windows problem. > > I found that Microsoft has a hotfix for this problem here: > > http://support.microsoft.com/kb/952117 > > This replaces the ndis.sys and ndiswan.sys files with newer versions > (different versions for SP2 and SP3). I downloaded and ran it, it replaced > the files all right but only made things a little worse -- gave me a blue > screen stop error when I tried standby in S1 mode. In S3 and S4 > (hibernate) > it just hung the computer as before. So I restored the original files. > > Can anyone help?
Guest Neil Harrington Posted September 29, 2008 Posted September 29, 2008 Re: WinXP SP3 system hangs on standby or hibernate "Neil Harrington" <not@home.today> wrote in message news:CZGdnZ4BbqcOu3zVnZ2dnUVZ_vadnZ2d@comcast.com... > > I think you're right, because on Biostar's site just now I see there is a > new (9/18/08) BIOS with the description "Fixed S3 issue (Beta)." > Unfortunately when I try to download it I get "The file is not exist." So > it looks like they're still working on it and that presumably is the > standby problem. Going to a Biostar "Global" site instead of USA, I see they still have it available for download there. But since it's beta and was apparently pulled from the first site, I'm a bit leery of using it. Neil
Guest Thee Chicago Wolf Posted September 29, 2008 Posted September 29, 2008 Re: WinXP SP3 system hangs on standby or hibernate >> I think you're right, because on Biostar's site just now I see there is a >> new (9/18/08) BIOS with the description "Fixed S3 issue (Beta)." >> Unfortunately when I try to download it I get "The file is not exist." So >> it looks like they're still working on it and that presumably is the >> standby problem. > >Going to a Biostar "Global" site instead of USA, I see they still have it >available for download there. But since it's beta and was apparently pulled >from the first site, I'm a bit leery of using it. > >Neil Neil, Weird, I went there and didn't see it earlier. At least it is acknowledged. If it isn't killing you right now, perhaps check back frequently until it is out of beta as they are usually pretty good at getting a fix out. Did you try those NVidia drivers yet for kicks? - Thee Chicago Wolf
Guest Neil Harrington Posted September 29, 2008 Posted September 29, 2008 Re: WinXP SP3 system hangs on standby or hibernate PA Bear, thanks, but neither of those is my problem. I can't get *into* standby or hibernation with that WinXP SP3 computer -- there's no error message of any kind, it just tells me "preparing to stand by ..." or "preparing to hibernate ..." as the case may be, and hangs. Neil "PA Bear [MS MVP]" <PABearMVP@gmail.com> wrote in message news:u6vNfpmIJHA.4280@TK2MSFTNGP04.phx.gbl... >A Windows XP SP3-based computer loses wireless connectivity when it resumes >from standby or from hibernation, or you receive an error message when you >try to put the computer in standby or in hibernation: > http://support.microsoft.com/kb/951447 > > Free unlimited installation and compatibility support is available for > Windows XP, but only for Service Pack 3 (SP3), until 14 Apr-09. Chat and > e-mail support is available only in the United States and Canada. Go to > http://support.microsoft.com/oas/default.aspx?gprid=1173 | select "Windows > XP" then select "Windows XP Service Pack 3" > -- > ~Robear Dyer (PA Bear) > MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002 > AumHa VSOP & Admin http://aumha.net > DTS-L http://dts-l.net/ > > Neil Harrington wrote: >> The system, a recent build, is as follows: >> >> Biostar TF7025-M2 (aka N68SA-M2T) >> GeForce 7025/NF630a chipset >> Athlon 64 X2 3600+ >> 2 GB DDR2 >> Nvidia GeForce 8600 GT >> WD 160GB hard drive >> WinXP Home v.2002 updated to SP3 >> >> Whenever I try to go into standby, I get the message "preparing to >> stand by ..." but the system just hangs. >> >> Changing standby in the BIOS from S1 to S3 makes no difference. >> >> I've enabled hibernation in Power Options but that doesn't work either. >> When >> I try to go into hibernation I just get "preparing to hibernate ..." and >> the >> system hangs again. >> >> Everything in the power management section of BIOS looks okay to me, the >> system has been doing this since it was all defaults and I don't see >> anything there likely to change it. So it looks like a Windows problem. >> >> I found that Microsoft has a hotfix for this problem here: >> >> http://support.microsoft.com/kb/952117 >> >> This replaces the ndis.sys and ndiswan.sys files with newer versions >> (different versions for SP2 and SP3). I downloaded and ran it, it >> replaced >> the files all right but only made things a little worse -- gave me a blue >> screen stop error when I tried standby in S1 mode. In S3 and S4 >> (hibernate) >> it just hung the computer as before. So I restored the original files. >> >> Can anyone help? >
Guest tran Posted September 29, 2008 Posted September 29, 2008 RE: WinXP SP3 system hangs on standby or hibernate Only Intel Processor can stand by or hibernate Windows XP Service Pack 3.
Guest Neil Harrington Posted September 30, 2008 Posted September 30, 2008 Re: WinXP SP3 system hangs on standby or hibernate "Thee Chicago Wolf" <.@.> wrote in message news:3hf2e41ubfi7bpkmk5k15vsun3t28mk3b8@4ax.com... >>> I think you're right, because on Biostar's site just now I see there is >>> a >>> new (9/18/08) BIOS with the description "Fixed S3 issue (Beta)." >>> Unfortunately when I try to download it I get "The file is not exist." >>> So >>> it looks like they're still working on it and that presumably is the >>> standby problem. >> >>Going to a Biostar "Global" site instead of USA, I see they still have it >>available for download there. But since it's beta and was apparently >>pulled >>from the first site, I'm a bit leery of using it. >> >>Neil > > Neil, > > Weird, I went there and didn't see it earlier. At least it is > acknowledged. If it isn't killing you right now, perhaps check back > frequently until it is out of beta as they are usually pretty good at > getting a fix out. Did you try those NVidia drivers yet for kicks? > > - Thee Chicago Wolf Wolf, I did get the NVidia drivers but haven't used them. When I started to install them there was a list of which drivers were included so one could pick and choose. But one of the NVidia drivers was for the HD audio, another was for Ethernet, and both of those things on the Biostar TF7025-M2 motherboard are RealTek -- so I assume it wouldn't be useful to install NVidia drivers. Most of the others are for items I didn't recognize and don't really understand, so I decided to skip them until I find out more about what they are. Everything works fine anyway, except for the standby/hibernate issue. As for the BIOS, I think I'll do exactly as you suggest and just check back with Biostar regularly. I only build these contraptions as a hobby and always have too many of 'em cluttering up the place anyway, so having just one that doesn't go into standby or hibernate won't ruin my life. :-) I did find the N68SM823 version BIOS that you mentioned in your first reply; oddly enough I couldn't find it on the Biostar site directly but I finally used Google and did find it, on the very site where I couldn't find it in the first place. I downloaded it, but from the description it seems to be mainly a fix for a couple of other problems I don't have. I'll probably install it anyway after I've familiarized myself with Biostar's current methods for doing this, but I don't expect it will fix this problem. I don't even remember when I last updated a BIOS. Neil
Guest Neil Harrington Posted September 30, 2008 Posted September 30, 2008 Re: WinXP SP3 system hangs on standby or hibernate "tran" <tran@discussions.microsoft.com> wrote in message news:116B8B4A-4606-4CD5-A895-C4E7C7212665@microsoft.com... > Only Intel Processor can stand by or hibernate Windows XP Service Pack 3. I have three other WinXP SP3 machines with AMD processors and they all stand by and hibernate just fine, no problem whatever.
Guest PA Bear [MS MVP] Posted September 30, 2008 Posted September 30, 2008 Re: WinXP SP3 system hangs on standby or hibernate Ignore the KB's subject or open a free support incident. Neil Harrington wrote: > PA Bear, thanks, but neither of those is my problem. I can't get *into* > standby or hibernation with that WinXP SP3 computer -- there's no error > message of any kind, it just tells me "preparing to stand by ..." or > "preparing to hibernate ..." as the case may be, and hangs. > > Neil > > > "PA Bear [MS MVP]" <PABearMVP@gmail.com> wrote in message > news:u6vNfpmIJHA.4280@TK2MSFTNGP04.phx.gbl... >> A Windows XP SP3-based computer loses wireless connectivity when it >> resumes >> from standby or from hibernation, or you receive an error message when >> you >> try to put the computer in standby or in hibernation: >> http://support.microsoft.com/kb/951447 >> >> Free unlimited installation and compatibility support is available for >> Windows XP, but only for Service Pack 3 (SP3), until 14 Apr-09. Chat and >> e-mail support is available only in the United States and Canada. Go to >> http://support.microsoft.com/oas/default.aspx?gprid=1173 | select >> "Windows >> XP" then select "Windows XP Service Pack 3" >> -- >> ~Robear Dyer (PA Bear) >> MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002 >> AumHa VSOP & Admin http://aumha.net >> DTS-L http://dts-l.net/ >> >> Neil Harrington wrote: >>> The system, a recent build, is as follows: >>> >>> Biostar TF7025-M2 (aka N68SA-M2T) >>> GeForce 7025/NF630a chipset >>> Athlon 64 X2 3600+ >>> 2 GB DDR2 >>> Nvidia GeForce 8600 GT >>> WD 160GB hard drive >>> WinXP Home v.2002 updated to SP3 >>> >>> Whenever I try to go into standby, I get the message "preparing to >>> stand by ..." but the system just hangs. >>> >>> Changing standby in the BIOS from S1 to S3 makes no difference. >>> >>> I've enabled hibernation in Power Options but that doesn't work either. >>> When >>> I try to go into hibernation I just get "preparing to hibernate ..." and >>> the >>> system hangs again. >>> >>> Everything in the power management section of BIOS looks okay to me, the >>> system has been doing this since it was all defaults and I don't see >>> anything there likely to change it. So it looks like a Windows problem. >>> >>> I found that Microsoft has a hotfix for this problem here: >>> >>> http://support.microsoft.com/kb/952117 >>> >>> This replaces the ndis.sys and ndiswan.sys files with newer versions >>> (different versions for SP2 and SP3). I downloaded and ran it, it >>> replaced >>> the files all right but only made things a little worse -- gave me a >>> blue >>> screen stop error when I tried standby in S1 mode. In S3 and S4 >>> (hibernate) >>> it just hung the computer as before. So I restored the original files. >>> >>> Can anyone help?
Guest Neil Harrington Posted September 30, 2008 Posted September 30, 2008 Re: WinXP SP3 system hangs on standby or hibernate Unfortunately I can't follow the instructions on that page. My network connection is a D-Link wireless adapter; I can follow the instructions up to "Click the General tab, and then click Configure," but there is no Power Management tab after that, and nothing else that offers the "Allow the computer to turn off this device to save power" check box. I will try opening a "free support incident" as you suggest, when I can figure out how to do that. Thanks. Neil "PA Bear [MS MVP]" <PABearMVP@gmail.com> wrote in message news:endRxcpIJHA.468@TK2MSFTNGP06.phx.gbl... > Ignore the KB's subject or open a free support incident. > > Neil Harrington wrote: >> PA Bear, thanks, but neither of those is my problem. I can't get *into* >> standby or hibernation with that WinXP SP3 computer -- there's no error >> message of any kind, it just tells me "preparing to stand by ..." or >> "preparing to hibernate ..." as the case may be, and hangs. >> >> Neil >> >> >> "PA Bear [MS MVP]" <PABearMVP@gmail.com> wrote in message >> news:u6vNfpmIJHA.4280@TK2MSFTNGP04.phx.gbl... >>> A Windows XP SP3-based computer loses wireless connectivity when it >>> resumes >>> from standby or from hibernation, or you receive an error message when >>> you >>> try to put the computer in standby or in hibernation: >>> http://support.microsoft.com/kb/951447 >>> >>> Free unlimited installation and compatibility support is available for >>> Windows XP, but only for Service Pack 3 (SP3), until 14 Apr-09. Chat and >>> e-mail support is available only in the United States and Canada. Go to >>> http://support.microsoft.com/oas/default.aspx?gprid=1173 | select >>> "Windows >>> XP" then select "Windows XP Service Pack 3" >>> -- >>> ~Robear Dyer (PA Bear) >>> MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002 >>> AumHa VSOP & Admin http://aumha.net >>> DTS-L http://dts-l.net/ >>> >>> Neil Harrington wrote: >>>> The system, a recent build, is as follows: >>>> >>>> Biostar TF7025-M2 (aka N68SA-M2T) >>>> GeForce 7025/NF630a chipset >>>> Athlon 64 X2 3600+ >>>> 2 GB DDR2 >>>> Nvidia GeForce 8600 GT >>>> WD 160GB hard drive >>>> WinXP Home v.2002 updated to SP3 >>>> >>>> Whenever I try to go into standby, I get the message "preparing to >>>> stand by ..." but the system just hangs. >>>> >>>> Changing standby in the BIOS from S1 to S3 makes no difference. >>>> >>>> I've enabled hibernation in Power Options but that doesn't work either. >>>> When >>>> I try to go into hibernation I just get "preparing to hibernate ..." >>>> and >>>> the >>>> system hangs again. >>>> >>>> Everything in the power management section of BIOS looks okay to me, >>>> the >>>> system has been doing this since it was all defaults and I don't see >>>> anything there likely to change it. So it looks like a Windows problem. >>>> >>>> I found that Microsoft has a hotfix for this problem here: >>>> >>>> http://support.microsoft.com/kb/952117 >>>> >>>> This replaces the ndis.sys and ndiswan.sys files with newer versions >>>> (different versions for SP2 and SP3). I downloaded and ran it, it >>>> replaced >>>> the files all right but only made things a little worse -- gave me a >>>> blue >>>> screen stop error when I tried standby in S1 mode. In S3 and S4 >>>> (hibernate) >>>> it just hung the computer as before. So I restored the original files. >>>> >>>> Can anyone help? >
Guest Plato Posted September 30, 2008 Posted September 30, 2008 Re: WinXP SP3 system hangs on standby or hibernate Neil Harrington wrote: > > The system, a recent build, is as follows: http://www.bootdisk.com/housecall/0034.htm#2 -- http://www.bootdisk.com/
Guest Neil Harrington Posted September 30, 2008 Posted September 30, 2008 Re: WinXP SP3 system hangs on standby or hibernate "Plato" <|@|.|> wrote in message news:48e1dce5$3$12816$bb4e3ad8@newscene.com... > Neil Harrington wrote: >> >> The system, a recent build, is as follows: > > http://www.bootdisk.com/housecall/0034.htm#2 Thanks, but nothing there seems related to my problem. > > -- > http://www.bootdisk.com/ Interesting site, but again, nothing related to my problem.
Guest PA Bear [MS MVP] Posted September 30, 2008 Posted September 30, 2008 Re: WinXP SP3 system hangs on standby or hibernate > I will try opening a "free support incident" as you suggest, when I can > figure out how to do that. Since you're a US resident see: http://support.microsoft.com/oas/default.aspx?ln=en-us&prid=11273&gprid=522131 Neil Harrington wrote: > Unfortunately I can't follow the instructions on that page. My network > connection is a D-Link wireless adapter; I can follow the instructions up > to > "Click the General tab, and then click Configure," but there is no Power > Management tab after that, and nothing else that offers the "Allow the > computer to turn off this device to save power" check box. > > I will try opening a "free support incident" as you suggest, when I can > figure out how to do that. Thanks. > > "PA Bear [MS MVP]" <PABearMVP@gmail.com> wrote in message > news:endRxcpIJHA.468@TK2MSFTNGP06.phx.gbl... >> Ignore the KB's subject or open a free support incident. >> >> Neil Harrington wrote: >>> PA Bear, thanks, but neither of those is my problem. I can't get *into* >>> standby or hibernation with that WinXP SP3 computer -- there's no error >>> message of any kind, it just tells me "preparing to stand by ..." or >>> "preparing to hibernate ..." as the case may be, and hangs. >>> >>> Neil >>> >>> >>> "PA Bear [MS MVP]" <PABearMVP@gmail.com> wrote in message >>> news:u6vNfpmIJHA.4280@TK2MSFTNGP04.phx.gbl... >>>> A Windows XP SP3-based computer loses wireless connectivity when it >>>> resumes >>>> from standby or from hibernation, or you receive an error message when >>>> you >>>> try to put the computer in standby or in hibernation: >>>> http://support.microsoft.com/kb/951447 >>>> >>>> Free unlimited installation and compatibility support is available for >>>> Windows XP, but only for Service Pack 3 (SP3), until 14 Apr-09. Chat >>>> and >>>> e-mail support is available only in the United States and Canada. Go >>>> to >>>> http://support.microsoft.com/oas/default.aspx?gprid=1173 | select >>>> "Windows >>>> XP" then select "Windows XP Service Pack 3" >>>> -- >>>> ~Robear Dyer (PA Bear) >>>> MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002 >>>> AumHa VSOP & Admin http://aumha.net >>>> DTS-L http://dts-l.net/ >>>> >>>> Neil Harrington wrote: >>>>> The system, a recent build, is as follows: >>>>> >>>>> Biostar TF7025-M2 (aka N68SA-M2T) >>>>> GeForce 7025/NF630a chipset >>>>> Athlon 64 X2 3600+ >>>>> 2 GB DDR2 >>>>> Nvidia GeForce 8600 GT >>>>> WD 160GB hard drive >>>>> WinXP Home v.2002 updated to SP3 >>>>> >>>>> Whenever I try to go into standby, I get the message "preparing to >>>>> stand by ..." but the system just hangs. >>>>> >>>>> Changing standby in the BIOS from S1 to S3 makes no difference. >>>>> >>>>> I've enabled hibernation in Power Options but that doesn't work >>>>> either. >>>>> When >>>>> I try to go into hibernation I just get "preparing to hibernate ..." >>>>> and >>>>> the >>>>> system hangs again. >>>>> >>>>> Everything in the power management section of BIOS looks okay to me, >>>>> the >>>>> system has been doing this since it was all defaults and I don't see >>>>> anything there likely to change it. So it looks like a Windows >>>>> problem. >>>>> >>>>> I found that Microsoft has a hotfix for this problem here: >>>>> >>>>> http://support.microsoft.com/kb/952117 >>>>> >>>>> This replaces the ndis.sys and ndiswan.sys files with newer versions >>>>> (different versions for SP2 and SP3). I downloaded and ran it, it >>>>> replaced >>>>> the files all right but only made things a little worse -- gave me a >>>>> blue >>>>> screen stop error when I tried standby in S1 mode. In S3 and S4 >>>>> (hibernate) >>>>> it just hung the computer as before. So I restored the original files. >>>>> >>>>> Can anyone help?
Guest Neil Harrington Posted October 1, 2008 Posted October 1, 2008 Re: WinXP SP3 system hangs on standby or hibernate Thanks again! "PA Bear [MS MVP]" <PABearMVP@gmail.com> wrote in message news:%23Mq7F%23xIJHA.4144@TK2MSFTNGP06.phx.gbl... >> I will try opening a "free support incident" as you suggest, when I can >> figure out how to do that. > > Since you're a US resident see: > http://support.microsoft.com/oas/default.aspx?ln=en-us&prid=11273&gprid=522131 > > Neil Harrington wrote: >> Unfortunately I can't follow the instructions on that page. My network >> connection is a D-Link wireless adapter; I can follow the instructions up >> to >> "Click the General tab, and then click Configure," but there is no Power >> Management tab after that, and nothing else that offers the "Allow the >> computer to turn off this device to save power" check box. >> >> I will try opening a "free support incident" as you suggest, when I can >> figure out how to do that. Thanks. >> >> "PA Bear [MS MVP]" <PABearMVP@gmail.com> wrote in message >> news:endRxcpIJHA.468@TK2MSFTNGP06.phx.gbl... >>> Ignore the KB's subject or open a free support incident. >>> >>> Neil Harrington wrote: >>>> PA Bear, thanks, but neither of those is my problem. I can't get *into* >>>> standby or hibernation with that WinXP SP3 computer -- there's no error >>>> message of any kind, it just tells me "preparing to stand by ..." or >>>> "preparing to hibernate ..." as the case may be, and hangs. >>>> >>>> Neil >>>> >>>> >>>> "PA Bear [MS MVP]" <PABearMVP@gmail.com> wrote in message >>>> news:u6vNfpmIJHA.4280@TK2MSFTNGP04.phx.gbl... >>>>> A Windows XP SP3-based computer loses wireless connectivity when it >>>>> resumes >>>>> from standby or from hibernation, or you receive an error message when >>>>> you >>>>> try to put the computer in standby or in hibernation: >>>>> http://support.microsoft.com/kb/951447 >>>>> >>>>> Free unlimited installation and compatibility support is available for >>>>> Windows XP, but only for Service Pack 3 (SP3), until 14 Apr-09. Chat >>>>> and >>>>> e-mail support is available only in the United States and Canada. Go >>>>> to >>>>> http://support.microsoft.com/oas/default.aspx?gprid=1173 | select >>>>> "Windows >>>>> XP" then select "Windows XP Service Pack 3" >>>>> -- >>>>> ~Robear Dyer (PA Bear) >>>>> MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002 >>>>> AumHa VSOP & Admin http://aumha.net >>>>> DTS-L http://dts-l.net/ >>>>> >>>>> Neil Harrington wrote: >>>>>> The system, a recent build, is as follows: >>>>>> >>>>>> Biostar TF7025-M2 (aka N68SA-M2T) >>>>>> GeForce 7025/NF630a chipset >>>>>> Athlon 64 X2 3600+ >>>>>> 2 GB DDR2 >>>>>> Nvidia GeForce 8600 GT >>>>>> WD 160GB hard drive >>>>>> WinXP Home v.2002 updated to SP3 >>>>>> >>>>>> Whenever I try to go into standby, I get the message "preparing to >>>>>> stand by ..." but the system just hangs. >>>>>> >>>>>> Changing standby in the BIOS from S1 to S3 makes no difference. >>>>>> >>>>>> I've enabled hibernation in Power Options but that doesn't work >>>>>> either. >>>>>> When >>>>>> I try to go into hibernation I just get "preparing to hibernate ..." >>>>>> and >>>>>> the >>>>>> system hangs again. >>>>>> >>>>>> Everything in the power management section of BIOS looks okay to me, >>>>>> the >>>>>> system has been doing this since it was all defaults and I don't see >>>>>> anything there likely to change it. So it looks like a Windows >>>>>> problem. >>>>>> >>>>>> I found that Microsoft has a hotfix for this problem here: >>>>>> >>>>>> http://support.microsoft.com/kb/952117 >>>>>> >>>>>> This replaces the ndis.sys and ndiswan.sys files with newer versions >>>>>> (different versions for SP2 and SP3). I downloaded and ran it, it >>>>>> replaced >>>>>> the files all right but only made things a little worse -- gave me a >>>>>> blue >>>>>> screen stop error when I tried standby in S1 mode. In S3 and S4 >>>>>> (hibernate) >>>>>> it just hung the computer as before. So I restored the original >>>>>> files. >>>>>> >>>>>> Can anyone help? >
Recommended Posts