Guest nick clark Posted September 30, 2008 Posted September 30, 2008 Hi , I have 3 DL380 G3's running w2k3 sp2 - these are all fresh installs. All firmware and drivers are patched to date using HP tools etc. These servers take approximately 10 minutes to shutdown during a reboot. Shutdown = no response from ping. I have no error messages, warnings etc in the even logs as these boxes go down. watching the boxes on an IP KVM the screen just goes black for 10 mins until it posts - then after a minute i can rdp onto them. all have 4Gb RAM, either single or dual 3.2 GHz Intel procs, no 3g/boot.ini switch. all other servers NOT DL380 G3 are fine .. i.e. G4's and 5's using the same build. I have also gone through and disabled all non-default services, ie HP SNMP, the service that i actually want to run on these boxes etc to remove them from the equation. 'shutdown' is now 8mins 30' so it has made a slight difference. Any idea's on what could be slowing down a G3 .. presume its that that is the cause. or anythoughts on what i can monitor as it is going down.. something must be hanging or slow write back etc. answers on a post card please. beer and pizza in it for you :) Cheers Nick
Guest Meinolf Weber Posted October 1, 2008 Posted October 1, 2008 Re: slow shutdown on HP DL380 G3 running w2k3 sp2 Hello nick, Is this policy enabled on the server, either local or via domain GPO? Computer configuration, windows settings, security settings, local policies, security options "Shutdown: Clear virtual memory pagefile" Best regards Meinolf Weber Disclaimer: This posting is provided "AS IS" with no warranties, and confers no rights. ** Please do NOT email, only reply to Newsgroups ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm > Hi , > > I have 3 DL380 G3's running w2k3 sp2 - these are all fresh installs. > All firmware and drivers are patched to date using HP tools etc. > These servers take approximately 10 minutes to shutdown during a > reboot. > Shutdown = no response from ping. > I have no error messages, warnings etc in the even logs as these boxes > go > down. > watching the boxes on an IP KVM the screen just goes black for 10 mins > until > it posts - then after a minute i can rdp onto them. > all have 4Gb RAM, either single or dual 3.2 GHz Intel procs, no > 3g/boot.ini > switch. > all other servers NOT DL380 G3 are fine .. i.e. G4's and 5's using the > same > build. > I have also gone through and disabled all non-default services, ie HP > SNMP, the service that i actually want to run on these boxes etc to > remove them from the equation. 'shutdown' is now 8mins 30' so it has > made a slight difference. > > Any idea's on what could be slowing down a G3 .. presume its that > that is the cause. or anythoughts on what i can monitor as it is going > down.. something must be hanging or slow write back etc. > > answers on a post card please. beer and pizza in it for you :) > > Cheers > > Nick >
Recommended Posts