XP Pro network card speed

[Guest Tester]

Hi there,

I have an XP Pro machine, recently new Dell Optiplex 745, I connect to

a switch and my network speed is only 10 Mbps, speed and duplex set to

auto in network card properties.

What can I check? Thanks, T

[Guest Thee Chicago Wolf]

Re: XP Pro network card speed

 

>I have an XP Pro machine, recently new Dell Optiplex 745, I connect to

>a switch and my network speed is only 10 Mbps, speed and duplex set to

>auto in network card properties.

>What can I check? Thanks, T

 

What is the driver version? 745 uses Broadcom if I'm not mistaken and

they can sometimes be a bit picky. Broadcom just released new drivers

last week so try the new ones and see if it helps:

http://www.broadcom.com/support/ethernet_nic/downloaddrivers.php

 

- Thee Chicago Wolf

[Guest smlunatick]

Re: XP Pro network card speed

 

On Oct 1, 1:52 pm, Tester <caling...@netscape.net> wrote:

> Hi there,

> I have an XP Pro machine, recently new Dell Optiplex 745, I connect to

> a switch and my network speed is only 10 Mbps, speed and duplex set to

> auto in network card properties.

> What can I check? Thanks, T

 

Since the speed settings and duplex is set to Auto, you need to first

check the cable and switch. Cables that are slightly "borderline" can

force the speed to 10. Bad or failing switch can also do this.

 

Also, are you sure you have a switch? A speed setting of 10 Mbps

would / could suggest an older Ethernet hub, which were mainly

"locked" at 10 Mbps.

[Guest Tester]

Re: XP Pro network card speed

 

On Oct 1, 9:38 am, smlunatick <yves...@gmail.com> wrote:

> On Oct 1, 1:52 pm, Tester <caling...@netscape.net> wrote:

>

> > Hi there,

> > I have an XP Pro machine, recently new Dell Optiplex 745, I connect to

> > a switch and my network speed is only 10 Mbps, speed and duplex set to

> > auto in network card properties.

> > What can I check? Thanks, T

>

> Since the speed settings and duplex is set to Auto, you need to first

> check the cable and switch.  Cables that are slightly "borderline" can

> force the speed to 10.  Bad or failing switch can also do this.

>

> Also, are you sure you have a switch?  A speed setting of 10 Mbps

> would / could suggest an older Ethernet hub, which were mainly

> "locked" at 10 Mbps.

 

Hi there,

1. Will change driver first.

 

2. Also will change PC network cable. For some reason the Cisco 2950

switch it connects to is set on that respective port to half duplex,

10 Mbps. I tried to set it to 100Mbps and full duplex but machine will

not connect to the DHCP server and not get even an IP address.

Thanks, T

[Guest smlunatick]

Re: XP Pro network card speed

 

On Oct 1, 8:09 pm, Tester <caling...@netscape.net> wrote:

> On Oct 1, 9:38 am, smlunatick <yves...@gmail.com> wrote:

>

> > On Oct 1, 1:52 pm, Tester <caling...@netscape.net> wrote:

>

> > > Hi there,

> > > I have an XP Pro machine, recently new Dell Optiplex 745, I connect to

> > > a switch and my network speed is only 10 Mbps, speed and duplex set to

> > > auto in network card properties.

> > > What can I check? Thanks, T

>

> > Since the speed settings and duplex is set to Auto, you need to first

> > check the cable and switch.  Cables that are slightly "borderline" can

> > force the speed to 10.  Bad or failing switch can also do this.

>

> > Also, are you sure you have a switch?  A speed setting of 10 Mbps

> > would / could suggest an older Ethernet hub, which were mainly

> > "locked" at 10 Mbps.

>

> Hi there,

> 1. Will change driver first.

>

> 2. Also will change PC network cable. For some reason the Cisco 2950

> switch it connects to is set on that respective port to half duplex,

> 10 Mbps. I tried to set it to 100Mbps and full duplex but machine will

> not connect to the DHCP server and not get even an IP address.

> Thanks, T

 

The the PC's Ethernet port is stuck at 10 Mbps or the cable is too

poor for 100 Mbps.

[Guest Plato]

Re: XP Pro network card speed

 

Tester wrote:

>

> I have an XP Pro machine, recently new Dell Optiplex 745, I connect to

> a switch and my network speed is only 10 Mbps, speed and duplex set to

> auto in network card properties.

 

Just as an aside, being now in the boondocks, I've found that Internet

speed often depends on what OS you are using. For example, I've had my

DSL race like a T3 with Vista, but in Win98/XP acts just like my cable

broadband.

 

--

http://www.bootdisk.com/