Win 7 crashes on welcome screen due to on board graphic card driver

[bafomet8404]

My computer just shutdown during a night, couple of days ago and would not start up again, no post, just fans were spinning and hdd and power lights came on. So I took out my PCIe graphic card and connected my lcd to on board video and pc would keep restarting no post again. So i got new ram put it in and on windows 7 welcome screen My PC would restart and keep restarting in an infinite loop. Then I tried to re-install my Win but PC would restart on completion and keep restarting in infinite loop, then I entered safe mode during windows installation and disabled my video driver and windows completed installation, but after re-enabling drivers it would restart again on welcome screen. I tried re-installing several drivers from my mobo manufacturer and flashing BIOS but to no succes. Any help would be welcome.

 

Motherboard is G31 -M7 TE

[rap20]

Check

- if you use SATA HDD verify whether it’s in compatible mode or in AHCI mode.

- check with only one RAM.

- Check the termperature of the CPU and graphics card. verify also the graphics card's fan.

http://www.rapidenumerique.fr : http://www.rapidesaisie.fr : http://www.saisiededonnees-idf.fr : http://www.saisiededocuments-idf.fr

http://www.archivagenumerique-idf.fr : http://www.saisie2documents.fr : http://www.saisiedetexte.fr : http://www.saisiedequestionnaires.fr

[KenB]

Hi and welcome to ExTS

 

would not start up again, no post

If you are still getting "no POST" then I suggest that you follow the tutorial I wrote on the subject.

see here:

http://kenspchelp.co.uk/viewtopic.php?f=36&t=246

 

No POST usually indicates a PSU or m/board problem.