Guest 2Tall Posted October 4, 2008 Posted October 4, 2008 I can get to Safe Mode, but once I choose any almost any selection, the computer then starts its boot sequence. When I get to the blue screen that says "Windows is starting up..." it just stops. I have restarted the machine about a dozen times. Twice I received the blue screen of death. One listed a problem with "beep.sys" - a problem with PAGE_FAULT_IN_NONPAGED_AREA and later another blue screen of death said my video driver failed to initialize. How do I get past the "Windows is starting up..."screen?
Guest Gerry Posted October 4, 2008 Posted October 4, 2008 Re: Boot problem - stuck at "Windows is starting up..." Background information on Stop Error message http://msdn2.microsoft.com/en-us/library/ms793437.aspx 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA (Click to consult the online MSDN article.) Requested data was not in memory. An invalid system memory address was referenced. Defective memory (including main memory, L2 RAM cache, video RAM) or incompatible software (including remote control and antivirus software) might cause this Stop message, as may other hardware problems (e.g., incorrect SCSI termination or a flawed PCI card). Source: http://aumha.org/a/stop.htm Have you tried Last Known Good Configuration? A description of the Safe Mode Boot options in Windows XP http://support.microsoft.com/kb/315222/en-us Another option mentioned in KB 315222 worth trying is "Enable VGA mode". Please post the complete Stop Error ( BSOD) Report. Disable automatic restart on system failure. This should help by allowing time to write down the STOP code properly. Right click on the My Computer icon on the Desktop and select Properties, Advanced, Start-Up and Recovery, System Failure and uncheck box before Automatically Restart. Do not re-enable automatic restart on system failure until you have resolved the problem. Check for variants of the Stop Error message. An alternative is to keep pressing the F8 key during Start-Up and select option - Disable automatic restart on system failure. If you are using a wireless keyboard and the F8 key does not work substitute a wired keyboard and mouse for this exercise only. -- Hope this helps. Gerry ~~~~ FCA Stourport, England Enquire, plan and execute ~~~~~~~~~~~~~~~~~~~ 2Tall wrote: > I can get to Safe Mode, but once I choose any almost any selection, > the computer then starts its boot sequence. When I get to the blue > screen that says "Windows is starting up..." it just stops. > > I have restarted the machine about a dozen times. Twice I received > the blue screen of death. One listed a problem with "beep.sys" - a > problem with PAGE_FAULT_IN_NONPAGED_AREA and later another blue > screen of death said my video driver failed to initialize. > > How do I get past the "Windows is starting up..."screen?
Guest 2Tall Posted October 4, 2008 Posted October 4, 2008 Re: Boot problem - stuck at "Windows is starting up..." I tried "Last known good configuration" and it makes it to the "Windows loading" screen and stops. I've also tried "Disable automatic restart..." and again it stops booting at the "Windows loading" screen. I already discovered the wireless keyboard didn't work and have switched to a wired keyboard. Also, in system setup under error logging it says Keyboard failure twice. I came across another reference to cleaning the interior of the computer. I popped the cover off and found the Sahara in my computer. I'm going to blow it clean, reseat some of the cards and try again. "Gerry" wrote: > Background information on Stop Error message > http://msdn2.microsoft.com/en-us/library/ms793437.aspx > > 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA > (Click to consult the online MSDN article.) > Requested data was not in memory. An invalid system memory address was > referenced. Defective memory (including main memory, L2 RAM cache, video > RAM) or incompatible software (including remote control and antivirus > software) might cause this Stop message, as may other hardware problems > (e.g., incorrect SCSI termination or a flawed PCI card). > Source: http://aumha.org/a/stop.htm > > Have you tried Last Known Good Configuration? > A description of the Safe Mode Boot options in Windows XP > http://support.microsoft.com/kb/315222/en-us > > Another option mentioned in KB 315222 worth trying is "Enable VGA mode". > > Please post the complete Stop Error ( BSOD) Report. > > Disable automatic restart on system failure. This should help by > allowing time to write down the STOP code properly. Right click on > the My Computer icon on the Desktop and select Properties, Advanced, > Start-Up and Recovery, System Failure and uncheck box before > Automatically Restart. > > Do not re-enable automatic restart on system failure until you have > resolved the problem. Check for variants of the Stop Error message. > > An alternative is to keep pressing the F8 key during Start-Up and select > option - Disable automatic restart on system failure. > > If you are using a wireless keyboard and the F8 key does not work > substitute a wired keyboard and mouse for this exercise only. > > -- > > > > Hope this helps. > > Gerry > ~~~~ > FCA > Stourport, England > Enquire, plan and execute > ~~~~~~~~~~~~~~~~~~~ > > > 2Tall wrote: > > I can get to Safe Mode, but once I choose any almost any selection, > > the computer then starts its boot sequence. When I get to the blue > > screen that says "Windows is starting up..." it just stops. > > > > I have restarted the machine about a dozen times. Twice I received > > the blue screen of death. One listed a problem with "beep.sys" - a > > problem with PAGE_FAULT_IN_NONPAGED_AREA and later another blue > > screen of death said my video driver failed to initialize. > > > > How do I get past the "Windows is starting up..."screen? > > >
Guest Gerry Posted October 4, 2008 Posted October 4, 2008 Re: Boot problem - stuck at "Windows is starting up..." Do you have a Desktop or Laptop computer? It could be overheating so you should check that all fans are working and use an Air Duster to remove any dust inside the casing. http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot -- Hope this helps. Gerry ~~~~ FCA Stourport, England Enquire, plan and execute ~~~~~~~~~~~~~~~~~~~ 2Tall wrote: > I tried "Last known good configuration" and it makes it to the > "Windows loading" screen and stops. I've also tried "Disable > automatic restart..." and again it stops booting at the "Windows > loading" screen. > > I already discovered the wireless keyboard didn't work and have > switched to a wired keyboard. Also, in system setup under error > logging it says Keyboard failure twice. > > I came across another reference to cleaning the interior of the > computer. I popped the cover off and found the Sahara in my computer. > I'm going to blow it clean, reseat some of the cards and try again. > > "Gerry" wrote: > >> Background information on Stop Error message >> http://msdn2.microsoft.com/en-us/library/ms793437.aspx >> >> 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA >> (Click to consult the online MSDN article.) >> Requested data was not in memory. An invalid system memory address >> was referenced. Defective memory (including main memory, L2 RAM >> cache, video RAM) or incompatible software (including remote control >> and antivirus software) might cause this Stop message, as may other >> hardware problems (e.g., incorrect SCSI termination or a flawed PCI >> card). >> Source: http://aumha.org/a/stop.htm >> >> Have you tried Last Known Good Configuration? >> A description of the Safe Mode Boot options in Windows XP >> http://support.microsoft.com/kb/315222/en-us >> >> Another option mentioned in KB 315222 worth trying is "Enable VGA >> mode". >> >> Please post the complete Stop Error ( BSOD) Report. >> >> Disable automatic restart on system failure. This should help by >> allowing time to write down the STOP code properly. Right click on >> the My Computer icon on the Desktop and select Properties, Advanced, >> Start-Up and Recovery, System Failure and uncheck box before >> Automatically Restart. >> >> Do not re-enable automatic restart on system failure until you have >> resolved the problem. Check for variants of the Stop Error message. >> >> An alternative is to keep pressing the F8 key during Start-Up and >> select option - Disable automatic restart on system failure. >> >> If you are using a wireless keyboard and the F8 key does not work >> substitute a wired keyboard and mouse for this exercise only. >> >> -- >> >> >> >> Hope this helps. >> >> Gerry >> ~~~~ >> FCA >> Stourport, England >> Enquire, plan and execute >> ~~~~~~~~~~~~~~~~~~~ >> >> >> 2Tall wrote: >>> I can get to Safe Mode, but once I choose any almost any selection, >>> the computer then starts its boot sequence. When I get to the blue >>> screen that says "Windows is starting up..." it just stops. >>> >>> I have restarted the machine about a dozen times. Twice I received >>> the blue screen of death. One listed a problem with "beep.sys" - a >>> problem with PAGE_FAULT_IN_NONPAGED_AREA and later another blue >>> screen of death said my video driver failed to initialize. >>> >>> How do I get past the "Windows is starting up..."screen?
Recommended Posts