Using external NTP time source to set time on W2k3 svr in a domain

October 6, 2008

The time on our servers (and domain) is about 5 to 8 minutes fast. I am

trying use an external source to set time in a domain environment. I have

been having problems following the directions in the following article:

How to configure an authoritative time server in Windows Server 2003

http://support.microsoft.com/default.aspx?scid=kb;en-us;816042

I have two w2k3 standard edition SP2 servers. One server is the PDC, but

when you type net time, it is pointing to the GP server. On the GP server it

points to itself. I have made all suggested changes in the above article,

and tried different time servers. I even tried using the command line:

net time: / setsntp:timesource - completed but no change, also tried:

w32tm /config /manualpeerlist:TimeServer(both w/ 0x1 and w/o)

/syncfromflags:manual /reliable:yes /update -- NADA

On the PDC - the log indicates:

Event ID: 35, the time service is now synchronizing the system time with the

time source gp.local (nep.dl192.168.1.14:123->192.168.1.22:123).

If go to the GP and try the same command, (get 2 different errors:)

Event ID: 14, The time provider NtpClient was unable to find a domain

controller to use as a time source. NtpClient will try again in x min.

Event ID: 29, The time provider NtpClient is configured to acquire time from

one or more time sources; however none of the sources are currently

accessible.

I have opened port 123, and pinged the time server, but get the same results.

Any help would be greatly appreciated.

Thanks,

October 7, 2008

Re: Using external NTP time source to set time on W2k3 svr in a domain

"dbright19" <dbright19@discussions.microsoft.com> wrote in message

news:E5D039C9-5274-437B-B6AF-22D669DCB30C@microsoft.com...

> The time on our servers (and domain) is about 5 to 8 minutes fast. I am

dbright19,

Reread the time sync documents. Your main DC - (the one with the FMSO

roles - there is no "PDC") should get its time from an authoritative

external source, not from the GP Server.

See -

http://support.microsoft.com/kb/262680

http://support.ntp.org/bin/view/Servers/NTPPoolServers

Every other domain member will sync to the DC, including the GP Server,

if it is a member of the same domain.

Regards,

Leonard Agoado

agoado@msn.com

October 7, 2008

Re: Using external NTP time source to set time on W2k3 svr in a domain

Hello dbright19,

On one of the DC's run "netdom query fsmo" in a command line and find the

DC which holds the PDCEmulator role. On this DC you have to set the external

time source. If netdom is not found on the machine, install the support\tools\suptools.msi

on the DC from the installation disk.

w32tm /config /manualpeerlist:peers /syncfromflags:manual /reliable:yes /update

With "peers" you can set the time source, either DNS name (time.windows.com)

or an ip address from a reliable time source.

Here you can find some of them:

http://www.pool.ntp.org/

Best regards

Meinolf Weber

Disclaimer: This posting is provided "AS IS" with no warranties, and confers

no rights.

** Please do NOT email, only reply to Newsgroups

** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

> The time on our servers (and domain) is about 5 to 8 minutes fast. I

> am

> trying use an external source to set time in a domain environment. I

> have

> been having problems following the directions in the following

> article:

> How to configure an authoritative time server in Windows Server 2003

> http://support.microsoft.com/default.aspx?scid=kb;en-us;816042

> I have two w2k3 standard edition SP2 servers. One server is the PDC,

> but

> when you type net time, it is pointing to the GP server. On the GP

> server it

> points to itself. I have made all suggested changes in the above

> article,

> and tried different time servers. I even tried using the command

> line:

> net time: / setsntp:timesource - completed but no change, also tried:

> w32tm /config /manualpeerlist:TimeServer(both w/ 0x1 and w/o)

> /syncfromflags:manual /reliable:yes /update -- NADA

> On the PDC - the log indicates:

> Event ID: 35, the time service is now synchronizing the system time

> with the

> time source gp.local (nep.dl192.168.1.14:123->192.168.1.22:123).

> If go to the GP and try the same command, (get 2 different errors:)

> Event ID: 14, The time provider NtpClient was unable to find a domain

> controller to use as a time source. NtpClient will try again in x

> min.

> Event ID: 29, The time provider NtpClient is configured to acquire

> time from

> one or more time sources; however none of the sources are currently

> accessible.

> I have opened port 123, and pinged the time server, but get the same

> results.

>

> Any help would be greatly appreciated.

>

> Thanks,

>

October 7, 2008

Re: Using external NTP time source to set time on W2k3 svr in a do

Re: Using external NTP time source to set time on W2k3 svr in a do

I followed the suggestions and still have the problem, and thanks for your

suggestions. I got the following information from running "netdom query

fsmo" on both the PDC server and the GP server :

Schema owner xxxxxxx-pdc.xxxxxxx.local

Domain role owner xxxxxxx-pdc.xxxxxxx.local

PDC role xxxxxxx-pdc.xxxxxxx.local

RID pool manager xxxxxxx-pdc.xxxxxxx.local

Infrastructure owner xxxxxxx-pdc.xxxxxxx.local

SO:

PDC: Setup to use external time source

timex.peachnet.edu --> 131.144.4.9

w32tm /config /manualpeerlist:131.144.4.9 /syncfromflags:manual

/reliable:yes /update

GP:

w32tm /config /update /syncfromflags:domhier /reliable:yes

each command completed with no errors. I have the same problem. Both

servers seem to be looking to GP

ON THE GP:

C:\WINNT\Profiles\Administrator>w32tm /monitor

pdc.xxxxx.local *** PDC *** [192.168.1.14]:

ICMP: 0ms delay.

NTP: +0.0000000s offset from pdc.xxxxx.local

RefID: gp.xxxxx.local [192.168.1.22]

gp.xxxxx.local [192.168.1.22]:

ICMP: 0ms delay.

NTP: -0.0000663s offset from pdc.xxxxx.local

RefID: 'LOCL' [76.79.67.76]

C:\WINNT\Profiles\Administrator>net time

Current time at \\GP is 10/7/2008 4:21 PM

From PDC:

C:\WINNT\Profiles\Administrator>w32tm /monitor

pdc.xxxxx.local *** PDC *** [192.168.1.14]:

ICMP: 0ms delay.

NTP: +0.0000000s offset from pdc.xxxxx.local

RefID: gp.xxxxx.local [192.168.1.22]

gp.xxxxx.local [192.168.1.22]:

ICMP: 0ms delay.

NTP: -0.0000663s offset from pdc.xxxxx.local

RefID: 'LOCL' [76.79.67.76]

C:\WINNT\Profiles\Administrator>net time

Current time at \\GP is 10/7/2008 5:05 PM

Any other suggestions? Thanks in advance.

"Meinolf Weber" wrote:

> Hello dbright19,

>

> On one of the DC's run "netdom query fsmo" in a command line and find the

> DC which holds the PDCEmulator role. On this DC you have to set the external

> time source. If netdom is not found on the machine, install the support\tools\suptools.msi

> on the DC from the installation disk.

>

> w32tm /config /manualpeerlist:peers /syncfromflags:manual /reliable:yes /update

>

> With "peers" you can set the time source, either DNS name (time.windows.com)

> or an ip address from a reliable time source.

>

> Here you can find some of them:

> http://www.pool.ntp.org/

>

> Best regards

>

> Meinolf Weber

> Disclaimer: This posting is provided "AS IS" with no warranties, and confers

> no rights.

> ** Please do NOT email, only reply to Newsgroups

> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

>

> > The time on our servers (and domain) is about 5 to 8 minutes fast. I

> > am

> > trying use an external source to set time in a domain environment. I

> > have

> > been having problems following the directions in the following

> > article:

> > How to configure an authoritative time server in Windows Server 2003

> > http://support.microsoft.com/default.aspx?scid=kb;en-us;816042

> > I have two w2k3 standard edition SP2 servers. One server is the PDC,

> > but

> > when you type net time, it is pointing to the GP server. On the GP

> > server it

> > points to itself. I have made all suggested changes in the above

> > article,

> > and tried different time servers. I even tried using the command

> > line:

> > net time: / setsntp:timesource - completed but no change, also tried:

> > w32tm /config /manualpeerlist:TimeServer(both w/ 0x1 and w/o)

> > /syncfromflags:manual /reliable:yes /update -- NADA

> > On the PDC - the log indicates:

> > Event ID: 35, the time service is now synchronizing the system time

> > with the

> > time source gp.local (nep.dl192.168.1.14:123->192.168.1.22:123).

> > If go to the GP and try the same command, (get 2 different errors:)

> > Event ID: 14, The time provider NtpClient was unable to find a domain

> > controller to use as a time source. NtpClient will try again in x

> > min.

> > Event ID: 29, The time provider NtpClient is configured to acquire

> > time from

> > one or more time sources; however none of the sources are currently

> > accessible.

> > I have opened port 123, and pinged the time server, but get the same

> > results.

> >

> > Any help would be greatly appreciated.

> >

> > Thanks,

> >

>

October 7, 2008

Re: Using external NTP time source to set time on W2k3 svr in a do

Re: Using external NTP time source to set time on W2k3 svr in a do

Hello dbright19,

What is your GP server?

Best regards

Meinolf Weber

Disclaimer: This posting is provided "AS IS" with no warranties, and confers

no rights.

** Please do NOT email, only reply to Newsgroups

** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

> I followed the suggestions and still have the problem, and thanks for

> your suggestions. I got the following information from running

> "netdom query fsmo" on both the PDC server and the GP server :

>

> Schema owner xxxxxxx-pdc.xxxxxxx.local

>

> Domain role owner xxxxxxx-pdc.xxxxxxx.local

>

> PDC role xxxxxxx-pdc.xxxxxxx.local

>

> RID pool manager xxxxxxx-pdc.xxxxxxx.local

>

> Infrastructure owner xxxxxxx-pdc.xxxxxxx.local

>

> SO:

> PDC: Setup to use external time source

> timex.peachnet.edu --> 131.144.4.9

> w32tm /config /manualpeerlist:131.144.4.9 /syncfromflags:manual

> /reliable:yes /update

>

> GP:

> w32tm /config /update /syncfromflags:domhier /reliable:yes

> each command completed with no errors. I have the same problem. Both

> servers seem to be looking to GP

>

> ON THE GP:

> C:\WINNT\Profiles\Administrator>w32tm /monitor

> pdc.xxxxx.local *** PDC *** [192.168.1.14]:

> ICMP: 0ms delay.

> NTP: +0.0000000s offset from pdc.xxxxx.local

> RefID: gp.xxxxx.local [192.168.1.22]

> gp.xxxxx.local [192.168.1.22]:

> ICMP: 0ms delay.

> NTP: -0.0000663s offset from pdc.xxxxx.local

> RefID: 'LOCL' [76.79.67.76]

> C:\WINNT\Profiles\Administrator>net time

> Current time at \\GP is 10/7/2008 4:21 PM

> From PDC:

>

> C:\WINNT\Profiles\Administrator>w32tm /monitor

> pdc.xxxxx.local *** PDC *** [192.168.1.14]:

> ICMP: 0ms delay.

> NTP: +0.0000000s offset from pdc.xxxxx.local

> RefID: gp.xxxxx.local [192.168.1.22]

> gp.xxxxx.local [192.168.1.22]:

> ICMP: 0ms delay.

> NTP: -0.0000663s offset from pdc.xxxxx.local

> RefID: 'LOCL' [76.79.67.76]

> C:\WINNT\Profiles\Administrator>net time

> Current time at \\GP is 10/7/2008 5:05 PM

> Any other suggestions? Thanks in advance.

>

> "Meinolf Weber" wrote:

>

>> Hello dbright19,

>>

>> On one of the DC's run "netdom query fsmo" in a command line and find

>> the DC which holds the PDCEmulator role. On this DC you have to set

>> the external time source. If netdom is not found on the machine,

>> install the support\tools\suptools.msi on the DC from the

>> installation disk.

>>

>> w32tm /config /manualpeerlist:peers /syncfromflags:manual

>> /reliable:yes /update

>>

>> With "peers" you can set the time source, either DNS name

>> (time.windows.com) or an ip address from a reliable time source.

>>

>> Here you can find some of them:

>> http://www.pool.ntp.org/

>> Best regards

>>

>> Meinolf Weber

>> Disclaimer: This posting is provided "AS IS" with no warranties, and

>> confers

>> no rights.

>> ** Please do NOT email, only reply to Newsgroups

>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

>>> The time on our servers (and domain) is about 5 to 8 minutes fast.

>>> I

>>> am

>>> trying use an external source to set time in a domain environment.

>>> I

>>> have

>>> been having problems following the directions in the following

>>> article:

>>> How to configure an authoritative time server in Windows Server 2003

>>> http://support.microsoft.com/default.aspx?scid=kb;en-us;816042

>>> I have two w2k3 standard edition SP2 servers. One server is the

>>> PDC,

>>> but

>>> when you type net time, it is pointing to the GP server. On the GP

>>> server it

>>> points to itself. I have made all suggested changes in the above

>>> article,

>>> and tried different time servers. I even tried using the command

>>> line:

>>> net time: / setsntp:timesource - completed but no change, also

>>> tried:

>>> w32tm /config /manualpeerlist:TimeServer(both w/ 0x1 and w/o)

>>> /syncfromflags:manual /reliable:yes /update -- NADA

>>> On the PDC - the log indicates:

>>> Event ID: 35, the time service is now synchronizing the system time

>>> with the

>>> time source gp.local (nep.dl192.168.1.14:123->192.168.1.22:123).

>>> If go to the GP and try the same command, (get 2 different errors:)

>>> Event ID: 14, The time provider NtpClient was unable to find a

>>> domain

>>> controller to use as a time source. NtpClient will try again in x

>>> min.

>>> Event ID: 29, The time provider NtpClient is configured to acquire

>>> time from

>>> one or more time sources; however none of the sources are currently

>>> accessible.

>>> I have opened port 123, and pinged the time server, but get the same

>>> results.

>>> Any help would be greatly appreciated.

>>>

>>> Thanks,

>>>

October 7, 2008

Re: Using external NTP time source to set time on W2k3 svr in a do

Re: Using external NTP time source to set time on W2k3 svr in a do

"dbright19" <dbright19@discussions.microsoft.com> wrote

> From PDC:

>

> C:\WINNT\Profiles\Administrator>w32tm /monitor

> pdc.xxxxx.local *** PDC *** [192.168.1.14]:

> ICMP: 0ms delay.

> NTP: +0.0000000s offset from pdc.xxxxx.local

> RefID: gp.xxxxx.local [192.168.1.22]

> gp.xxxxx.local [192.168.1.22]:

> ICMP: 0ms delay.

> NTP: -0.0000663s offset from pdc.xxxxx.local

> RefID: 'LOCL' [76.79.67.76]

>

> C:\WINNT\Profiles\Administrator>net time

> Current time at \\GP is 10/7/2008 5:05 PM

>

> Any other suggestions? Thanks in advance.

dbright19,

On the PDC, what does the System Event Log show when you

restart the Windows Time service?

Regards,

Leonard Agoado

agoado@msn.com

October 8, 2008

Re: Using external NTP time source to set time on W2k3 svr in a do

Re: Using external NTP time source to set time on W2k3 svr in a do

The GP Server is a Personnel / File Server.

The GP Event Log:

Source: W32Time

Event ID: 29

Computer: GP

The time provider NtpClient is configured to

acquire time from one or more time sources,

however none of the sources are currently

accessible. No attempt to contact a source

will be made for 15 minutes . NtpClient has

no source of accurate time.

For more information, see Help and Support Center

at http://go.microsoft.com/fwlink/events.asp.

REPEATS but changes the minutes from 15 to

30 / 60 / 120 / 240 / 480.

Also at same time:

Source: w32Time

Event ID: 14

Computer: GP

The time provider NtpClient was unable to find

a domain controller to use as a time source.

NtpClient will try again in 15 minutes.

For more information, see Help and Support Center

at http://go.microsoft.com/fwlink/events.asp.

Event log On PDC:

Source: W32Time

Event ID: 35

Computer: PDC

The time service is now synchronizing the

system time with the time source

gp.xxxxxx.local (ntp.d|192.168.1.14:123->192.168.1.22:123).

For more information, see Help and Support Center at

http://go.microsoft.com/fwlink/events.asp.

"Leonard Agoado" wrote:

>

> "dbright19" <dbright19@discussions.microsoft.com> wrote

>

> > From PDC:

> >

> > C:\WINNT\Profiles\Administrator>w32tm /monitor

> > pdc.xxxxx.local *** PDC *** [192.168.1.14]:

> > ICMP: 0ms delay.

> > NTP: +0.0000000s offset from pdc.xxxxx.local

> > RefID: gp.xxxxx.local [192.168.1.22]

> > gp.xxxxx.local [192.168.1.22]:

> > ICMP: 0ms delay.

> > NTP: -0.0000663s offset from pdc.xxxxx.local

> > RefID: 'LOCL' [76.79.67.76]

> >

> > C:\WINNT\Profiles\Administrator>net time

> > Current time at \\GP is 10/7/2008 5:05 PM

> >

> > Any other suggestions? Thanks in advance.

>

> dbright19,

>

> On the PDC, what does the System Event Log show when you

> restart the Windows Time service?

>

> Regards,

>

> Leonard Agoado

> agoado@msn.com

>

October 8, 2008

Re: Using external NTP time source to set time on W2k3 svr in a do

Re: Using external NTP time source to set time on W2k3 svr in a do

Hello dbright19,

Please post an unedited ipconfig /all from 192.168.1.14 and 192.168.1.22

Which of them is the PDCEmulator?

Best regards

Meinolf Weber

Disclaimer: This posting is provided "AS IS" with no warranties, and confers

no rights.

** Please do NOT email, only reply to Newsgroups

** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

> The GP Server is a Personnel / File Server.

>

> The GP Event Log:

>

> Source: W32Time Event ID: 29 Computer: GP

>

> The time provider NtpClient is configured to acquire time from one or

> more time sources, however none of the sources are currently

> accessible. No attempt to contact a source will be made for 15

> minutes . NtpClient has no source of accurate time.

>

> For more information, see Help and Support Center at

> http://go.microsoft.com/fwlink/events.asp.

>

> REPEATS but changes the minutes from 15 to 30 / 60 / 120 / 240 / 480.

>

> Also at same time:

> Source: w32Time

> Event ID: 14

> Computer: GP

> The time provider NtpClient was unable to find a domain controller to

> use as a time source. NtpClient will try again in 15 minutes.

>

> For more information, see Help and Support Center at

> http://go.microsoft.com/fwlink/events.asp.

>

> Event log On PDC:

>

> Source: W32Time

> Event ID: 35

> Computer: PDC

> The time service is now synchronizing the system time with the time

> source gp.xxxxxx.local (ntp.d|192.168.1.14:123->192.168.1.22:123).

>

> For more information, see Help and Support Center at

> http://go.microsoft.com/fwlink/events.asp.

>

> "Leonard Agoado" wrote:

>

>> "dbright19" <dbright19@discussions.microsoft.com> wrote

>>

>>> From PDC:

>>>

>>> C:\WINNT\Profiles\Administrator>w32tm /monitor

>>> pdc.xxxxx.local *** PDC *** [192.168.1.14]:

>>> ICMP: 0ms delay.

>>> NTP: +0.0000000s offset from pdc.xxxxx.local

>>> RefID: gp.xxxxx.local [192.168.1.22]

>>> gp.xxxxx.local [192.168.1.22]:

>>> ICMP: 0ms delay.

>>> NTP: -0.0000663s offset from pdc.xxxxx.local

>>> RefID: 'LOCL' [76.79.67.76]

>>> C:\WINNT\Profiles\Administrator>net time

>>> Current time at \\GP is 10/7/2008 5:05 PM

>>> Any other suggestions? Thanks in advance.

>>>

>> dbright19,

>>

>> On the PDC, what does the System Event Log show when you restart the

>> Windows Time service?

>>

>> Regards,

>>

>> Leonard Agoado

>> agoado@msn.com

October 8, 2008

Re: Using external NTP time source to set time on W2k3 svr in a do

Re: Using external NTP time source to set time on W2k3 svr in a do

Note: I can ping the NTP server selected from both servers, and port 123 is

open.

IPCONFIG INFO:

GP:

Windows IP Configuration

Host Name . . . . . . . . . . . . : gp

Primary Dns Suffix . . . . . . . : xxxxxxxx.local

Node Type . . . . . . . . . . . . : Hybrid

IP Routing Enabled. . . . . . . . : No

WINS Proxy Enabled. . . . . . . . : No

DNS Suffix Search List. . . . . . : xxxxxxxx.local

Ethernet adapter Local Area Connection 2:

Connection-specific DNS Suffix . :

Description . . . . . . . . . . . : Intel 8255x-based PCI Ethernet

Adapter (1

0/100)

Physical Address. . . . . . . . . : yy-yy-yy-yy-yy-yy

DHCP Enabled. . . . . . . . . . . : No

IP Address. . . . . . . . . . . . : 192.168.1.22

Subnet Mask . . . . . . . . . . . : 255.255.255.0

Default Gateway . . . . . . . . . : 192.168.1.1

DNS Servers . . . . . . . . . . . : 192.168.1.14

192.168.1.10

Primary WINS Server . . . . . . . : 192.168.1.14

Secondary WINS Server . . . . . . : 192.168.1.10

C:\WINNT\Profiles\Administrator>

PDC:

Host Name . . . . . . . . . . . . : pdc

Primary Dns Suffix . . . . . . . : xxxxxxxx.local

Node Type . . . . . . . . . . . . : Unknown

IP Routing Enabled. . . . . . . . : Yes

WINS Proxy Enabled. . . . . . . . : Yes

DNS Suffix Search List. . . . . . : xxxxxxxx.local

DOMAINNAME

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : DOMAINNAME

Description . . . . . . . . . . . : 3Com EtherLink XL 10/100 PCI TX NIC

(3C90

5B-TX)

Physical Address. . . . . . . . . : xx-xx-xx-xx-xx-xx

DHCP Enabled. . . . . . . . . . . : No

IP Address. . . . . . . . . . . . : 192.168.1.14

Subnet Mask . . . . . . . . . . . : 255.255.255.0

Default Gateway . . . . . . . . . : 192.168.1.1

DNS Servers . . . . . . . . . . . : 192.168.1.14

Primary WINS Server . . . . . . . : 192.168.1.14

Secondary WINS Server . . . . . . : 192.168.1.10

192.168.1.11

C:\WINNT\Profiles\Administrator>

"Meinolf Weber" wrote:

> Hello dbright19,

>

> Please post an unedited ipconfig /all from 192.168.1.14 and 192.168.1.22

> Which of them is the PDCEmulator?

>

> Best regards

>

> Meinolf Weber

> Disclaimer: This posting is provided "AS IS" with no warranties, and confers

> no rights.

> ** Please do NOT email, only reply to Newsgroups

> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

>

> > The GP Server is a Personnel / File Server.

> >

> > The GP Event Log:

> >

> > Source: W32Time Event ID: 29 Computer: GP

> >

> > The time provider NtpClient is configured to acquire time from one or

> > more time sources, however none of the sources are currently

> > accessible. No attempt to contact a source will be made for 15

> > minutes . NtpClient has no source of accurate time.

> >

> > For more information, see Help and Support Center at

> > http://go.microsoft.com/fwlink/events.asp.

> >

> > REPEATS but changes the minutes from 15 to 30 / 60 / 120 / 240 / 480.

> >

> > Also at same time:

> > Source: w32Time

> > Event ID: 14

> > Computer: GP

> > The time provider NtpClient was unable to find a domain controller to

> > use as a time source. NtpClient will try again in 15 minutes.

> >

> > For more information, see Help and Support Center at

> > http://go.microsoft.com/fwlink/events.asp.

> >

> > Event log On PDC:

> >

> > Source: W32Time

> > Event ID: 35

> > Computer: PDC

> > The time service is now synchronizing the system time with the time

> > source gp.xxxxxx.local (ntp.d|192.168.1.14:123->192.168.1.22:123).

> >

> > For more information, see Help and Support Center at

> > http://go.microsoft.com/fwlink/events.asp.

> >

> > "Leonard Agoado" wrote:

> >

> >> "dbright19" <dbright19@discussions.microsoft.com> wrote

> >>

> >>> From PDC:

> >>>

> >>> C:\WINNT\Profiles\Administrator>w32tm /monitor

> >>> pdc.xxxxx.local *** PDC *** [192.168.1.14]:

> >>> ICMP: 0ms delay.

> >>> NTP: +0.0000000s offset from pdc.xxxxx.local

> >>> RefID: gp.xxxxx.local [192.168.1.22]

> >>> gp.xxxxx.local [192.168.1.22]:

> >>> ICMP: 0ms delay.

> >>> NTP: -0.0000663s offset from pdc.xxxxx.local

> >>> RefID: 'LOCL' [76.79.67.76]

> >>> C:\WINNT\Profiles\Administrator>net time

> >>> Current time at \\GP is 10/7/2008 5:05 PM

> >>> Any other suggestions? Thanks in advance.

> >>>

> >> dbright19,

> >>

> >> On the PDC, what does the System Event Log show when you restart the

> >> Windows Time service?

> >>

> >> Regards,

> >>

> >> Leonard Agoado

> >> agoado@msn.com

>

October 8, 2008

Re: Using external NTP time source to set time on W2k3 svr in a do

Re: Using external NTP time source to set time on W2k3 svr in a do

Hello dbright19,

Because all computers in a domain belongs to the time on the PDCEmulator

it can not use a domain member as time server. The x.x.x.22 is domain internal.

On the PDCEmulator you have to configure to an domain EXTERNAL time server.

See this one:

http://technet.microsoft.com/en-us/library/cc786897.aspx

Or see "Configuring the Windows Time service to use an internal hardware

clock":

http://support.microsoft.com/kb/816042

In a domain the PDCEmulator is the time source, all DC's sync with it and

all member servers and workstations sync with one available DC, that's the

way in a domain.

Best regards

Meinolf Weber

Disclaimer: This posting is provided "AS IS" with no warranties, and confers

no rights.

** Please do NOT email, only reply to Newsgroups

** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

> Note: I can ping the NTP server selected from both servers, and port

> 123 is open.

>

> IPCONFIG INFO:

>

> GP:

>

> Windows IP Configuration

>

> Host Name . . . . . . . . . . . . : gp

> Primary Dns Suffix . . . . . . . : xxxxxxxx.local

> Node Type . . . . . . . . . . . . : Hybrid

> IP Routing Enabled. . . . . . . . : No

> WINS Proxy Enabled. . . . . . . . : No

> DNS Suffix Search List. . . . . . : xxxxxxxx.local

> Ethernet adapter Local Area Connection 2:

>

> Connection-specific DNS Suffix . :

> Description . . . . . . . . . . . : Intel 8255x-based PCI Ethernet

> Adapter (1

> 0/100)

> Physical Address. . . . . . . . . : yy-yy-yy-yy-yy-yy

> DHCP Enabled. . . . . . . . . . . : No

> IP Address. . . . . . . . . . . . : 192.168.1.22

> Subnet Mask . . . . . . . . . . . : 255.255.255.0

> Default Gateway . . . . . . . . . : 192.168.1.1

> DNS Servers . . . . . . . . . . . : 192.168.1.14

> 192.168.1.10

> Primary WINS Server . . . . . . . : 192.168.1.14

> Secondary WINS Server . . . . . . : 192.168.1.10

> C:\WINNT\Profiles\Administrator>

>

> PDC:

>

> Host Name . . . . . . . . . . . . : pdc

> Primary Dns Suffix . . . . . . . : xxxxxxxx.local

> Node Type . . . . . . . . . . . . : Unknown

> IP Routing Enabled. . . . . . . . : Yes

> WINS Proxy Enabled. . . . . . . . : Yes

> DNS Suffix Search List. . . . . . : xxxxxxxx.local

> DOMAINNAME

> Ethernet adapter Local Area Connection:

>

> Connection-specific DNS Suffix . : DOMAINNAME

> Description . . . . . . . . . . . : 3Com EtherLink XL 10/100 PCI TX

> NIC

> (3C90

> 5B-TX)

> Physical Address. . . . . . . . . : xx-xx-xx-xx-xx-xx

> DHCP Enabled. . . . . . . . . . . : No

> IP Address. . . . . . . . . . . . : 192.168.1.14

> Subnet Mask . . . . . . . . . . . : 255.255.255.0

> Default Gateway . . . . . . . . . : 192.168.1.1

> DNS Servers . . . . . . . . . . . : 192.168.1.14

> Primary WINS Server . . . . . . . : 192.168.1.14

> Secondary WINS Server . . . . . . : 192.168.1.10

> 192.168.1.11

> C:\WINNT\Profiles\Administrator>

>

> "Meinolf Weber" wrote:

>

>> Hello dbright19,

>>

>> Please post an unedited ipconfig /all from 192.168.1.14 and

>> 192.168.1.22 Which of them is the PDCEmulator?

>>

>> Best regards

>>

>> Meinolf Weber

>> Disclaimer: This posting is provided "AS IS" with no warranties, and

>> confers

>> no rights.

>> ** Please do NOT email, only reply to Newsgroups

>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

>>> The GP Server is a Personnel / File Server.

>>>

>>> The GP Event Log:

>>>

>>> Source: W32Time Event ID: 29 Computer: GP

>>>

>>> The time provider NtpClient is configured to acquire time from one

>>> or more time sources, however none of the sources are currently

>>> accessible. No attempt to contact a source will be made for 15

>>> minutes . NtpClient has no source of accurate time.

>>>

>>> For more information, see Help and Support Center at

>>> http://go.microsoft.com/fwlink/events.asp.

>>>

>>> REPEATS but changes the minutes from 15 to 30 / 60 / 120 / 240 /

>>> 480.

>>>

>>> Also at same time:

>>> Source: w32Time

>>> Event ID: 14

>>> Computer: GP

>>> The time provider NtpClient was unable to find a domain controller

>>> to

>>> use as a time source. NtpClient will try again in 15 minutes.

>>> For more information, see Help and Support Center at

>>> http://go.microsoft.com/fwlink/events.asp.

>>>

>>> Event log On PDC:

>>>

>>> Source: W32Time

>>> Event ID: 35

>>> Computer: PDC

>>> The time service is now synchronizing the system time with the time

>>> source gp.xxxxxx.local (ntp.d|192.168.1.14:123->192.168.1.22:123).

>>> For more information, see Help and Support Center at

>>> http://go.microsoft.com/fwlink/events.asp.

>>>

>>> "Leonard Agoado" wrote:

>>>

>>>> "dbright19" <dbright19@discussions.microsoft.com> wrote

>>>>

>>>>> From PDC:

>>>>>

>>>>> C:\WINNT\Profiles\Administrator>w32tm /monitor

>>>>> pdc.xxxxx.local *** PDC *** [192.168.1.14]:

>>>>> ICMP: 0ms delay.

>>>>> NTP: +0.0000000s offset from pdc.xxxxx.local

>>>>> RefID: gp.xxxxx.local [192.168.1.22]

>>>>> gp.xxxxx.local [192.168.1.22]:

>>>>> ICMP: 0ms delay.

>>>>> NTP: -0.0000663s offset from pdc.xxxxx.local

>>>>> RefID: 'LOCL' [76.79.67.76]

>>>>> C:\WINNT\Profiles\Administrator>net time

>>>>> Current time at \\GP is 10/7/2008 5:05 PM

>>>>> Any other suggestions? Thanks in advance.

>>>> dbright19,

>>>>

>>>> On the PDC, what does the System Event Log show when you restart

>>>> the Windows Time service?

>>>>

>>>> Regards,

>>>>

>>>> Leonard Agoado

>>>> agoado@msn.com

October 8, 2008

Re: Using external NTP time source to set time on W2k3 svr in a do

Re: Using external NTP time source to set time on W2k3 svr in a do

Thank you. I have reviewed the link, and I get the following results:

C:\WINNT\Profiles\Administrator>w32tm /stripchart /computer:131:144.4.9

/samples:10 /dataonly

The following error occurred: No such service is known. The service cannot

be fo

und in the specified name space. (0x8007277C)

"Meinolf Weber" wrote:

> Hello dbright19,

>

> Because all computers in a domain belongs to the time on the PDCEmulator

> it can not use a domain member as time server. The x.x.x.22 is domain internal.

>

> On the PDCEmulator you have to configure to an domain EXTERNAL time server.

> See this one:

> http://technet.microsoft.com/en-us/library/cc786897.aspx

>

> Or see "Configuring the Windows Time service to use an internal hardware

> clock":

> http://support.microsoft.com/kb/816042

>

> In a domain the PDCEmulator is the time source, all DC's sync with it and

> all member servers and workstations sync with one available DC, that's the

> way in a domain.

>

> Best regards

>

> Meinolf Weber

> Disclaimer: This posting is provided "AS IS" with no warranties, and confers

> no rights.

> ** Please do NOT email, only reply to Newsgroups

> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

>

> > Note: I can ping the NTP server selected from both servers, and port

> > 123 is open.

> >

> > IPCONFIG INFO:

> >

> > GP:

> >

> > Windows IP Configuration

> >

> > Host Name . . . . . . . . . . . . : gp

> > Primary Dns Suffix . . . . . . . : xxxxxxxx.local

> > Node Type . . . . . . . . . . . . : Hybrid

> > IP Routing Enabled. . . . . . . . : No

> > WINS Proxy Enabled. . . . . . . . : No

> > DNS Suffix Search List. . . . . . : xxxxxxxx.local

> > Ethernet adapter Local Area Connection 2:

> >

> > Connection-specific DNS Suffix . :

> > Description . . . . . . . . . . . : Intel 8255x-based PCI Ethernet

> > Adapter (1

> > 0/100)

> > Physical Address. . . . . . . . . : yy-yy-yy-yy-yy-yy

> > DHCP Enabled. . . . . . . . . . . : No

> > IP Address. . . . . . . . . . . . : 192.168.1.22

> > Subnet Mask . . . . . . . . . . . : 255.255.255.0

> > Default Gateway . . . . . . . . . : 192.168.1.1

> > DNS Servers . . . . . . . . . . . : 192.168.1.14

> > 192.168.1.10

> > Primary WINS Server . . . . . . . : 192.168.1.14

> > Secondary WINS Server . . . . . . : 192.168.1.10

> > C:\WINNT\Profiles\Administrator>

> >

> > PDC:

> >

> > Host Name . . . . . . . . . . . . : pdc

> > Primary Dns Suffix . . . . . . . : xxxxxxxx.local

> > Node Type . . . . . . . . . . . . : Unknown

> > IP Routing Enabled. . . . . . . . : Yes

> > WINS Proxy Enabled. . . . . . . . : Yes

> > DNS Suffix Search List. . . . . . : xxxxxxxx.local

> > DOMAINNAME

> > Ethernet adapter Local Area Connection:

> >

> > Connection-specific DNS Suffix . : DOMAINNAME

> > Description . . . . . . . . . . . : 3Com EtherLink XL 10/100 PCI TX

> > NIC

> > (3C90

> > 5B-TX)

> > Physical Address. . . . . . . . . : xx-xx-xx-xx-xx-xx

> > DHCP Enabled. . . . . . . . . . . : No

> > IP Address. . . . . . . . . . . . : 192.168.1.14

> > Subnet Mask . . . . . . . . . . . : 255.255.255.0

> > Default Gateway . . . . . . . . . : 192.168.1.1

> > DNS Servers . . . . . . . . . . . : 192.168.1.14

> > Primary WINS Server . . . . . . . : 192.168.1.14

> > Secondary WINS Server . . . . . . : 192.168.1.10

> > 192.168.1.11

> > C:\WINNT\Profiles\Administrator>

> >

> > "Meinolf Weber" wrote:

> >

> >> Hello dbright19,

> >>

> >> Please post an unedited ipconfig /all from 192.168.1.14 and

> >> 192.168.1.22 Which of them is the PDCEmulator?

> >>

> >> Best regards

> >>

> >> Meinolf Weber

> >> Disclaimer: This posting is provided "AS IS" with no warranties, and

> >> confers

> >> no rights.

> >> ** Please do NOT email, only reply to Newsgroups

> >> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

> >>> The GP Server is a Personnel / File Server.

> >>>

> >>> The GP Event Log:

> >>>

> >>> Source: W32Time Event ID: 29 Computer: GP

> >>>

> >>> The time provider NtpClient is configured to acquire time from one

> >>> or more time sources, however none of the sources are currently

> >>> accessible. No attempt to contact a source will be made for 15

> >>> minutes . NtpClient has no source of accurate time.

> >>>

> >>> For more information, see Help and Support Center at

> >>> http://go.microsoft.com/fwlink/events.asp.

> >>>

> >>> REPEATS but changes the minutes from 15 to 30 / 60 / 120 / 240 /

> >>> 480.

> >>>

> >>> Also at same time:

> >>> Source: w32Time

> >>> Event ID: 14

> >>> Computer: GP

> >>> The time provider NtpClient was unable to find a domain controller

> >>> to

> >>> use as a time source. NtpClient will try again in 15 minutes.

> >>> For more information, see Help and Support Center at

> >>> http://go.microsoft.com/fwlink/events.asp.

> >>>

> >>> Event log On PDC:

> >>>

> >>> Source: W32Time

> >>> Event ID: 35

> >>> Computer: PDC

> >>> The time service is now synchronizing the system time with the time

> >>> source gp.xxxxxx.local (ntp.d|192.168.1.14:123->192.168.1.22:123).

> >>> For more information, see Help and Support Center at

> >>> http://go.microsoft.com/fwlink/events.asp.

> >>>

> >>> "Leonard Agoado" wrote:

> >>>

> >>>> "dbright19" <dbright19@discussions.microsoft.com> wrote

> >>>>

> >>>>> From PDC:

> >>>>>

> >>>>> C:\WINNT\Profiles\Administrator>w32tm /monitor

> >>>>> pdc.xxxxx.local *** PDC *** [192.168.1.14]:

> >>>>> ICMP: 0ms delay.

> >>>>> NTP: +0.0000000s offset from pdc.xxxxx.local

> >>>>> RefID: gp.xxxxx.local [192.168.1.22]

> >>>>> gp.xxxxx.local [192.168.1.22]:

> >>>>> ICMP: 0ms delay.

> >>>>> NTP: -0.0000663s offset from pdc.xxxxx.local

> >>>>> RefID: 'LOCL' [76.79.67.76]

> >>>>> C:\WINNT\Profiles\Administrator>net time

> >>>>> Current time at \\GP is 10/7/2008 5:05 PM

> >>>>> Any other suggestions? Thanks in advance.

> >>>> dbright19,

> >>>>

> >>>> On the PDC, what does the System Event Log show when you restart

> >>>> the Windows Time service?

> >>>>

> >>>> Regards,

> >>>>

> >>>> Leonard Agoado

> >>>> agoado@msn.com

>

October 8, 2008

Re: Using external NTP time source to set time on W2k3 svr in a do

Re: Using external NTP time source to set time on W2k3 svr in a do

Hello dbright19,

Your command:

w32tm /stripchart /computer:131:144.4.9 /samples:10 /dataonly

should be:

w32tm /stripchart /computer:131.144.4.9 /samples:10 /dataonly

Difference is the ":" between 131 and 144, must be "." Or is it a typo?

If i run w32tm /stripchart /computer:131.144.4.9 /samples:10 /dataonly:

Tracking 131.144.4.9 [131.144.4.9:123].

Collecting 10 samples.

The current time is 08-Oct-08 19:11:04 PM.

19:11:04, +08.0482054s

19:11:07, error: 0x800705B4

19:11:10, +08.0485200s

19:11:12, +08.0479481s

19:11:14, +08.0485672s

19:11:16, +08.0495947s

19:11:19, +08.0493827s

19:11:21, +08.0492199s

19:11:23, +08.0493328s

19:11:26, +08.0491118s

Best regards

Meinolf Weber

Disclaimer: This posting is provided "AS IS" with no warranties, and confers

no rights.

** Please do NOT email, only reply to Newsgroups

** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

> Thank you. I have reviewed the link, and I get the following results:

>

> C:\WINNT\Profiles\Administrator>w32tm /stripchart

> /computer:131:144.4.9

> /samples:10 /dataonly

> The following error occurred: No such service is known. The service

> cannot

> be fo

> und in the specified name space. (0x8007277C)

> "Meinolf Weber" wrote:

>

>> Hello dbright19,

>>

>> Because all computers in a domain belongs to the time on the

>> PDCEmulator it can not use a domain member as time server. The

>> x.x.x.22 is domain internal.

>>

>> On the PDCEmulator you have to configure to an domain EXTERNAL time

>> server.

>> See this one:

>> http://technet.microsoft.com/en-us/library/cc786897.aspx

>> Or see "Configuring the Windows Time service to use an internal

>> hardware

>> clock":

>> http://support.microsoft.com/kb/816042

>> In a domain the PDCEmulator is the time source, all DC's sync with it

>> and all member servers and workstations sync with one available DC,

>> that's the way in a domain.

>>

>> Best regards

>>

>> Meinolf Weber

>> Disclaimer: This posting is provided "AS IS" with no warranties, and

>> confers

>> no rights.

>> ** Please do NOT email, only reply to Newsgroups

>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

>>> Note: I can ping the NTP server selected from both servers, and

>>> port 123 is open.

>>>

>>> IPCONFIG INFO:

>>>

>>> GP:

>>>

>>> Windows IP Configuration

>>>

>>> Host Name . . . . . . . . . . . . : gp

>>> Primary Dns Suffix . . . . . . . : xxxxxxxx.local

>>> Node Type . . . . . . . . . . . . : Hybrid

>>> IP Routing Enabled. . . . . . . . : No

>>> WINS Proxy Enabled. . . . . . . . : No

>>> DNS Suffix Search List. . . . . . : xxxxxxxx.local

>>> Ethernet adapter Local Area Connection 2:

>>> Connection-specific DNS Suffix . :

>>> Description . . . . . . . . . . . : Intel 8255x-based PCI Ethernet

>>> Adapter (1

>>> 0/100)

>>> Physical Address. . . . . . . . . : yy-yy-yy-yy-yy-yy

>>> DHCP Enabled. . . . . . . . . . . : No

>>> IP Address. . . . . . . . . . . . : 192.168.1.22

>>> Subnet Mask . . . . . . . . . . . : 255.255.255.0

>>> Default Gateway . . . . . . . . . : 192.168.1.1

>>> DNS Servers . . . . . . . . . . . : 192.168.1.14

>>> 192.168.1.10

>>> Primary WINS Server . . . . . . . : 192.168.1.14

>>> Secondary WINS Server . . . . . . : 192.168.1.10

>>> C:\WINNT\Profiles\Administrator>

>>> PDC:

>>>

>>> Host Name . . . . . . . . . . . . : pdc

>>> Primary Dns Suffix . . . . . . . : xxxxxxxx.local

>>> Node Type . . . . . . . . . . . . : Unknown

>>> IP Routing Enabled. . . . . . . . : Yes

>>> WINS Proxy Enabled. . . . . . . . : Yes

>>> DNS Suffix Search List. . . . . . : xxxxxxxx.local

>>> DOMAINNAME

>>> Ethernet adapter Local Area Connection:

>>> Connection-specific DNS Suffix . : DOMAINNAME

>>> Description . . . . . . . . . . . : 3Com EtherLink XL 10/100 PCI TX

>>> NIC

>>> (3C90

>>> 5B-TX)

>>> Physical Address. . . . . . . . . : xx-xx-xx-xx-xx-xx

>>> DHCP Enabled. . . . . . . . . . . : No

>>> IP Address. . . . . . . . . . . . : 192.168.1.14

>>> Subnet Mask . . . . . . . . . . . : 255.255.255.0

>>> Default Gateway . . . . . . . . . : 192.168.1.1

>>> DNS Servers . . . . . . . . . . . : 192.168.1.14

>>> Primary WINS Server . . . . . . . : 192.168.1.14

>>> Secondary WINS Server . . . . . . : 192.168.1.10

>>> 192.168.1.11

>>> C:\WINNT\Profiles\Administrator>

>>> "Meinolf Weber" wrote:

>>>

>>>> Hello dbright19,

>>>>

>>>> Please post an unedited ipconfig /all from 192.168.1.14 and

>>>> 192.168.1.22 Which of them is the PDCEmulator?

>>>>

>>>> Best regards

>>>>

>>>> Meinolf Weber

>>>> Disclaimer: This posting is provided "AS IS" with no warranties,

>>>> and

>>>> confers

>>>> no rights.

>>>> ** Please do NOT email, only reply to Newsgroups

>>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

>>>>> The GP Server is a Personnel / File Server.

>>>>>

>>>>> The GP Event Log:

>>>>>

>>>>> Source: W32Time Event ID: 29 Computer: GP

>>>>>

>>>>> The time provider NtpClient is configured to acquire time from one

>>>>> or more time sources, however none of the sources are currently

>>>>> accessible. No attempt to contact a source will be made for 15

>>>>> minutes . NtpClient has no source of accurate time.

>>>>>

>>>>> For more information, see Help and Support Center at

>>>>> http://go.microsoft.com/fwlink/events.asp.

>>>>>

>>>>> REPEATS but changes the minutes from 15 to 30 / 60 / 120 / 240 /

>>>>> 480.

>>>>>

>>>>> Also at same time:

>>>>> Source: w32Time

>>>>> Event ID: 14

>>>>> Computer: GP

>>>>> The time provider NtpClient was unable to find a domain controller

>>>>> to

>>>>> use as a time source. NtpClient will try again in 15 minutes.

>>>>> For more information, see Help and Support Center at

>>>>> http://go.microsoft.com/fwlink/events.asp.

>>>>> Event log On PDC:

>>>>>

>>>>> Source: W32Time

>>>>> Event ID: 35

>>>>> Computer: PDC

>>>>> The time service is now synchronizing the system time with the

>>>>> time

>>>>> source gp.xxxxxx.local (ntp.d|192.168.1.14:123->192.168.1.22:123).

>>>>> For more information, see Help and Support Center at

>>>>> http://go.microsoft.com/fwlink/events.asp.

>>>>> "Leonard Agoado" wrote:

>>>>>

>>>>>> "dbright19" <dbright19@discussions.microsoft.com> wrote

>>>>>>

>>>>>>> From PDC:

>>>>>>>

>>>>>>> C:\WINNT\Profiles\Administrator>w32tm /monitor

>>>>>>> pdc.xxxxx.local *** PDC *** [192.168.1.14]:

>>>>>>> ICMP: 0ms delay.

>>>>>>> NTP: +0.0000000s offset from pdc.xxxxx.local

>>>>>>> RefID: gp.xxxxx.local [192.168.1.22]

>>>>>>> gp.xxxxx.local [192.168.1.22]:

>>>>>>> ICMP: 0ms delay.

>>>>>>> NTP: -0.0000663s offset from pdc.xxxxx.local

>>>>>>> RefID: 'LOCL' [76.79.67.76]

>>>>>>> C:\WINNT\Profiles\Administrator>net time

>>>>>>> Current time at \\GP is 10/7/2008 5:05 PM

>>>>>>> Any other suggestions? Thanks in advance.

>>>>>> dbright19,

>>>>>>

>>>>>> On the PDC, what does the System Event Log show when you restart

>>>>>> the Windows Time service?

>>>>>>

>>>>>> Regards,

>>>>>>

>>>>>> Leonard Agoado

>>>>>> agoado@msn.com

October 8, 2008

Re: Using external NTP time source to set time on W2k3 svr in a do

Re: Using external NTP time source to set time on W2k3 svr in a do

It was a mistake / typo . Here is the corrected command and the results:

C:\WINNT\Profiles\Administrator>w32tm /stripchart /computer:131.44.4.9

/samples:10/dataonly

Tracking 131.44.4.9 [131.44.4.9].

Collecting 10 samples.

The current time is 10/8/2008 2:13:07 PM (local time).

14:13:07 error: 0x800705B4

14:13:10 error: 0x800705B4

14:13:13 error: 0x800705B4

14:13:16 error: 0x800705B4

14:13:19 error: 0x800705B4

14:13:23 error: 0x800705B4

14:13:26 error: 0x800705B4

14:13:29 error: 0x800705B4

14:13:32 error: 0x800705B4

14:13:35 error: 0x800705B4

Any other ideas?

Thanks in advance.

"Meinolf Weber" wrote:

> Hello dbright19,

>

> Your command:

> w32tm /stripchart /computer:131:144.4.9 /samples:10 /dataonly

>

> should be:

> w32tm /stripchart /computer:131.144.4.9 /samples:10 /dataonly

>

> Difference is the ":" between 131 and 144, must be "." Or is it a typo?

>

> If i run w32tm /stripchart /computer:131.144.4.9 /samples:10 /dataonly:

> Tracking 131.144.4.9 [131.144.4.9:123].

> Collecting 10 samples.

> The current time is 08-Oct-08 19:11:04 PM.

> 19:11:04, +08.0482054s

> 19:11:07, error: 0x800705B4

> 19:11:10, +08.0485200s

> 19:11:12, +08.0479481s

> 19:11:14, +08.0485672s

> 19:11:16, +08.0495947s

> 19:11:19, +08.0493827s

> 19:11:21, +08.0492199s

> 19:11:23, +08.0493328s

> 19:11:26, +08.0491118s

>

> Best regards

>

> Meinolf Weber

> Disclaimer: This posting is provided "AS IS" with no warranties, and confers

> no rights.

> ** Please do NOT email, only reply to Newsgroups

> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

>

> > Thank you. I have reviewed the link, and I get the following results:

> >

> > C:\WINNT\Profiles\Administrator>w32tm /stripchart

> > /computer:131:144.4.9

> > /samples:10 /dataonly

> > The following error occurred: No such service is known. The service

> > cannot

> > be fo

> > und in the specified name space. (0x8007277C)

> > "Meinolf Weber" wrote:

> >

> >> Hello dbright19,

> >>

> >> Because all computers in a domain belongs to the time on the

> >> PDCEmulator it can not use a domain member as time server. The

> >> x.x.x.22 is domain internal.

> >>

> >> On the PDCEmulator you have to configure to an domain EXTERNAL time

> >> server.

> >> See this one:

> >> http://technet.microsoft.com/en-us/library/cc786897.aspx

> >> Or see "Configuring the Windows Time service to use an internal

> >> hardware

> >> clock":

> >> http://support.microsoft.com/kb/816042

> >> In a domain the PDCEmulator is the time source, all DC's sync with it

> >> and all member servers and workstations sync with one available DC,

> >> that's the way in a domain.

> >>

> >> Best regards

> >>

> >> Meinolf Weber

> >> Disclaimer: This posting is provided "AS IS" with no warranties, and

> >> confers

> >> no rights.

> >> ** Please do NOT email, only reply to Newsgroups

> >> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

> >>> Note: I can ping the NTP server selected from both servers, and

> >>> port 123 is open.

> >>>

> >>> IPCONFIG INFO:

> >>>

> >>> GP:

> >>>

> >>> Windows IP Configuration

> >>>

> >>> Host Name . . . . . . . . . . . . : gp

> >>> Primary Dns Suffix . . . . . . . : xxxxxxxx.local

> >>> Node Type . . . . . . . . . . . . : Hybrid

> >>> IP Routing Enabled. . . . . . . . : No

> >>> WINS Proxy Enabled. . . . . . . . : No

> >>> DNS Suffix Search List. . . . . . : xxxxxxxx.local

> >>> Ethernet adapter Local Area Connection 2:

> >>> Connection-specific DNS Suffix . :

> >>> Description . . . . . . . . . . . : Intel 8255x-based PCI Ethernet

> >>> Adapter (1

> >>> 0/100)

> >>> Physical Address. . . . . . . . . : yy-yy-yy-yy-yy-yy

> >>> DHCP Enabled. . . . . . . . . . . : No

> >>> IP Address. . . . . . . . . . . . : 192.168.1.22

> >>> Subnet Mask . . . . . . . . . . . : 255.255.255.0

> >>> Default Gateway . . . . . . . . . : 192.168.1.1

> >>> DNS Servers . . . . . . . . . . . : 192.168.1.14

> >>> 192.168.1.10

> >>> Primary WINS Server . . . . . . . : 192.168.1.14

> >>> Secondary WINS Server . . . . . . : 192.168.1.10

> >>> C:\WINNT\Profiles\Administrator>

> >>> PDC:

> >>>

> >>> Host Name . . . . . . . . . . . . : pdc

> >>> Primary Dns Suffix . . . . . . . : xxxxxxxx.local

> >>> Node Type . . . . . . . . . . . . : Unknown

> >>> IP Routing Enabled. . . . . . . . : Yes

> >>> WINS Proxy Enabled. . . . . . . . : Yes

> >>> DNS Suffix Search List. . . . . . : xxxxxxxx.local

> >>> DOMAINNAME

> >>> Ethernet adapter Local Area Connection:

> >>> Connection-specific DNS Suffix . : DOMAINNAME

> >>> Description . . . . . . . . . . . : 3Com EtherLink XL 10/100 PCI TX

> >>> NIC

> >>> (3C90

> >>> 5B-TX)

> >>> Physical Address. . . . . . . . . : xx-xx-xx-xx-xx-xx

> >>> DHCP Enabled. . . . . . . . . . . : No

> >>> IP Address. . . . . . . . . . . . : 192.168.1.14

> >>> Subnet Mask . . . . . . . . . . . : 255.255.255.0

> >>> Default Gateway . . . . . . . . . : 192.168.1.1

> >>> DNS Servers . . . . . . . . . . . : 192.168.1.14

> >>> Primary WINS Server . . . . . . . : 192.168.1.14

> >>> Secondary WINS Server . . . . . . : 192.168.1.10

> >>> 192.168.1.11

> >>> C:\WINNT\Profiles\Administrator>

> >>> "Meinolf Weber" wrote:

> >>>

> >>>> Hello dbright19,

> >>>>

> >>>> Please post an unedited ipconfig /all from 192.168.1.14 and

> >>>> 192.168.1.22 Which of them is the PDCEmulator?

> >>>>

> >>>> Best regards

> >>>>

> >>>> Meinolf Weber

> >>>> Disclaimer: This posting is provided "AS IS" with no warranties,

> >>>> and

> >>>> confers

> >>>> no rights.

> >>>> ** Please do NOT email, only reply to Newsgroups

> >>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

> >>>>> The GP Server is a Personnel / File Server.

> >>>>>

> >>>>> The GP Event Log:

> >>>>>

> >>>>> Source: W32Time Event ID: 29 Computer: GP

> >>>>>

> >>>>> The time provider NtpClient is configured to acquire time from one

> >>>>> or more time sources, however none of the sources are currently

> >>>>> accessible. No attempt to contact a source will be made for 15

> >>>>> minutes . NtpClient has no source of accurate time.

> >>>>>

> >>>>> For more information, see Help and Support Center at

> >>>>> http://go.microsoft.com/fwlink/events.asp.

> >>>>>

> >>>>> REPEATS but changes the minutes from 15 to 30 / 60 / 120 / 240 /

> >>>>> 480.

> >>>>>

> >>>>> Also at same time:

> >>>>> Source: w32Time

> >>>>> Event ID: 14

> >>>>> Computer: GP

> >>>>> The time provider NtpClient was unable to find a domain controller

> >>>>> to

> >>>>> use as a time source. NtpClient will try again in 15 minutes.

> >>>>> For more information, see Help and Support Center at

> >>>>> http://go.microsoft.com/fwlink/events.asp.

> >>>>> Event log On PDC:

> >>>>>

> >>>>> Source: W32Time

> >>>>> Event ID: 35

> >>>>> Computer: PDC

> >>>>> The time service is now synchronizing the system time with the

> >>>>> time

> >>>>> source gp.xxxxxx.local (ntp.d|192.168.1.14:123->192.168.1.22:123).

> >>>>> For more information, see Help and Support Center at

> >>>>> http://go.microsoft.com/fwlink/events.asp.

> >>>>> "Leonard Agoado" wrote:

> >>>>>

> >>>>>> "dbright19" <dbright19@discussions.microsoft.com> wrote

> >>>>>>

> >>>>>>> From PDC:

> >>>>>>>

> >>>>>>> C:\WINNT\Profiles\Administrator>w32tm /monitor

> >>>>>>> pdc.xxxxx.local *** PDC *** [192.168.1.14]:

> >>>>>>> ICMP: 0ms delay.

> >>>>>>> NTP: +0.0000000s offset from pdc.xxxxx.local

> >>>>>>> RefID: gp.xxxxx.local [192.168.1.22]

> >>>>>>> gp.xxxxx.local [192.168.1.22]:

> >>>>>>> ICMP: 0ms delay.

> >>>>>>> NTP: -0.0000663s offset from pdc.xxxxx.local

> >>>>>>> RefID: 'LOCL' [76.79.67.76]

> >>>>>>> C:\WINNT\Profiles\Administrator>net time

> >>>>>>> Current time at \\GP is 10/7/2008 5:05 PM

> >>>>>>> Any other suggestions? Thanks in advance.

> >>>>>> dbright19,

> >>>>>>

> >>>>>> On the PDC, what does the System Event Log show when you restart

> >>>>>> the Windows Time service?

> >>>>>>

> >>>>>> Regards,

> >>>>>>

> >>>>>> Leonard Agoado

> >>>>>> agoado@msn.com

>

Sign In

Using external NTP time source to set time on W2k3 svr in a domain

Recommended Posts

Guest dbright19

Popular Days

Popular Days

Guest Leonard Agoado

Guest Meinolf Weber

Guest dbright19

Guest Meinolf Weber

Guest Leonard Agoado

Guest dbright19

Guest Meinolf Weber

Guest dbright19

Guest Meinolf Weber

Guest dbright19

Guest Meinolf Weber

Guest dbright19

Similar Content

Windows Clients not Picking Up NTP Time from PDC

Will DHCP settings replicate between 2 domain controllers?

Network & Internet closes in settings every time i try to open it

Windows Server 2022 - PC won't join domain, is there some settings I have set wrong??

Can disabled GPO's still increase logon time to the domain

Browse

Activity

Site Info