Guest Terry Preuit Posted October 6, 2008 Posted October 6, 2008 Hello, Finished print jobs are getting stuck in the printer queue, causing subsequent jobs to wait several minutes before they can be sent to the printer. This is a Windows XP SP3 machine, with a new Canon PIXMMA MX700 multifunction printer. Last Friday I had to replace the original HP OfficeJet 7410 AIO because it would no longer feed paper. Other than that, it worked great despite our torture. The owner wanted a different brand, however, so I recommended this Canon, which I installed after removing the HP software and rebooting. However, we're having two problems that seem to be related: 1) When sending a print job to the queue when it's empty, the job will print and the last page of the job will eject, but the job remains in the queue. The computer appears to think that it hasn't finished sending the job. For instance, if I print a test page, it will send 72.1 KB of a 72.2 KB job and then wait ten minutes or so before clearing the queue. This happens printing other jobs/kinds of documents, as well. 2) The System Event Log shows many successive Event ID 54s from source "ousb2hub": Event Type: Warning Event Source: ousb2hub Event Category: None Event ID: 54 Date: 99/99/9999 Time: 99:99:99 AA User: N/A Computer: AAAAAA Description: The description for Event ID ( 54 ) in Source ( ousb2hub ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: \Device\0000006c. Data: 0000: 00 00 00 00 01 00 5a 00 ......Z. 0008: 00 00 00 00 36 00 04 80 ....6..€ 0010: 00 00 00 00 00 00 00 00 ........ 0018: 00 00 00 00 00 00 00 00 ........ 0020: 00 00 00 00 00 00 00 00 ........ I've called Canon and they have no idea about this. I tried uninstalling and reinstalling the USB hub and the printer, but that doesn't help either. I'll be very grateful for any ideas. -- David Dickinson eveningstar at mvps dot org
Guest Bob I Posted October 6, 2008 Posted October 6, 2008 Re: Event ID 54 in ousb2hub: Print jobs not clearing Does the HP still exist in the Print Server Properties? If so, remove it. Terry Preuit wrote: > Hello, > > Finished print jobs are getting stuck in the printer queue, causing > subsequent jobs to wait several minutes before they can be sent to the > printer. > > This is a Windows XP SP3 machine, with a new Canon PIXMMA MX700 > multifunction printer. > > Last Friday I had to replace the original HP OfficeJet 7410 AIO because it > would no longer feed paper. Other than that, it worked great despite our > torture. > > The owner wanted a different brand, however, so I recommended this Canon, > which I installed after removing the HP software and rebooting. However, > we're having two problems that seem to be related: > > 1) When sending a print job to the queue when it's empty, the job will print > and the last page of the job will eject, but the job remains in the queue. > The computer appears to think that it hasn't finished sending the job. For > instance, if I print a test page, it will send 72.1 KB of a 72.2 KB job and > then wait ten minutes or so before clearing the queue. This happens > printing other jobs/kinds of documents, as well. > > 2) The System Event Log shows many successive Event ID 54s from source > "ousb2hub": > > Event Type: Warning > Event Source: ousb2hub > Event Category: None > Event ID: 54 > Date: 99/99/9999 > Time: 99:99:99 AA > User: N/A > Computer: AAAAAA > Description: > The description for Event ID ( 54 ) in Source ( ousb2hub ) cannot be found. > The local computer may not have the necessary registry information or > message DLL files to display messages from a remote computer. You may be > able to use the /AUXSOURCE= flag to retrieve this description; see Help and > Support for details. The following information is part of the event: > \Device\0000006c. > Data: > 0000: 00 00 00 00 01 00 5a 00 ......Z. > 0008: 00 00 00 00 36 00 04 80 ....6..€ > 0010: 00 00 00 00 00 00 00 00 ........ > 0018: 00 00 00 00 00 00 00 00 ........ > 0020: 00 00 00 00 00 00 00 00 ........ > > I've called Canon and they have no idea about this. I tried uninstalling > and reinstalling the USB hub and the printer, but that doesn't help either. > > I'll be very grateful for any ideas. > > -- > David Dickinson > eveningstar at mvps dot org > >
Guest Terry Preuit Posted October 7, 2008 Posted October 7, 2008 Re: Event ID 54 in ousb2hub: Print jobs not clearing Hi, Bob, Thanks for your reply. It turns out that the old HP driver was still listed in Server Properties. I removed it. All that's left are the fax and print drivers for the Canon, and two Amyuni PDF converter drivers used by Quickbooks and another application. After I removed the HP driver, I tried printing a test page and got the same result: it sent 77.4 KB of a 77.5 KB job, and did not clear the queue. I rebooted the machine with that job still in the queue, and after Windows started, it resent the test page to the printer with the same fershluginer result. It took about five minutes for the queue to clear, at which time the Event ID 54's from ousb2hub started appearing at a rate of 9 (yes, nine) per second for about ten seconds every 4 to 6 minutes or so. This seems pretty wierd to me. I'm going to uninstall the Canon and try this again. I'll write back with the results. David Dickinson eveningstar at mvps dot org "Bob I" <birelan@yahoo.com> wrote in message news:uQbk5o$JJHA.1160@TK2MSFTNGP05.phx.gbl... Does the HP still exist in the Print Server Properties? If so, remove it. Terry Preuit wrote: > Hello, > > Finished print jobs are getting stuck in the printer queue, causing > subsequent jobs to wait several minutes before they can be sent to the > printer. > > This is a Windows XP SP3 machine, with a new Canon PIXMMA MX700 > multifunction printer. > > Last Friday I had to replace the original HP OfficeJet 7410 AIO because it > would no longer feed paper. Other than that, it worked great despite our > torture. > > The owner wanted a different brand, however, so I recommended this Canon, > which I installed after removing the HP software and rebooting. However, > we're having two problems that seem to be related: > > 1) When sending a print job to the queue when it's empty, the job will > print and the last page of the job will eject, but the job remains in the > queue. The computer appears to think that it hasn't finished sending the > job. For instance, if I print a test page, it will send 72.1 KB of a 72.2 > KB job and then wait ten minutes or so before clearing the queue. This > happens printing other jobs/kinds of documents, as well. > > 2) The System Event Log shows many successive Event ID 54s from source > "ousb2hub": > > Event Type: Warning > Event Source: ousb2hub > Event Category: None > Event ID: 54 > Date: 99/99/9999 > Time: 99:99:99 AA > User: N/A > Computer: AAAAAA > Description: > The description for Event ID ( 54 ) in Source ( ousb2hub ) cannot be > found. The local computer may not have the necessary registry information > or message DLL files to display messages from a remote computer. You may > be able to use the /AUXSOURCE= flag to retrieve this description; see Help > and Support for details. The following information is part of the event: > \Device\0000006c. > Data: > 0000: 00 00 00 00 01 00 5a 00 ......Z. > 0008: 00 00 00 00 36 00 04 80 ....6..€ > 0010: 00 00 00 00 00 00 00 00 ........ > 0018: 00 00 00 00 00 00 00 00 ........ > 0020: 00 00 00 00 00 00 00 00 ........ > > I've called Canon and they have no idea about this. I tried uninstalling > and reinstalling the USB hub and the printer, but that doesn't help > either. > > I'll be very grateful for any ideas. > > -- > David Dickinson > eveningstar at mvps dot org > >
Guest Terry Preuit Posted October 7, 2008 Posted October 7, 2008 Re: Event ID 54 in ousb2hub: Print jobs not clearing I uninstalled all of the Canon software, including the driver that remained in Server Properties. I restarted the machine and reinstalled the printer. Same result. I'm don't believe this is a problem with the printer. I'm using this same model on several other Windows XP machines with no problems. I'm stuck. David "David" wrote in message news:OY2KBpDKJHA.1308@TK2MSFTNGP02.phx.gbl... > Hi, Bob, > > Thanks for your reply. > > It turns out that the old HP driver was still listed in Server Properties. > I removed it. All that's left are the fax and print drivers for the > Canon, and two Amyuni PDF converter drivers used by Quickbooks and another > application. > > After I removed the HP driver, I tried printing a test page and got the > same result: it sent 77.4 KB of a 77.5 KB job, and did not clear the > queue. > > I rebooted the machine with that job still in the queue, and after Windows > started, it resent the test page to the printer with the same fershluginer > result. It took about five minutes for the queue to clear, at which time > the Event ID 54's from ousb2hub started appearing at a rate of 9 (yes, > nine) per second for about ten seconds every 4 to 6 minutes or so. > > This seems pretty wierd to me. I'm going to uninstall the Canon and try > this again. I'll write back with the results. > > David Dickinson > eveningstar at mvps dot org > > > "Bob I" <> wrote in message news:uQbk5o$JJHA.1160@TK2MSFTNGP05.phx.gbl... > Does the HP still exist in the Print Server Properties? If so, remove it. > > Terry Preuit wrote: > >> Hello, >> >> Finished print jobs are getting stuck in the printer queue, causing >> subsequent jobs to wait several minutes before they can be sent to the >> printer. >> >> This is a Windows XP SP3 machine, with a new Canon PIXMMA MX700 >> multifunction printer. >> >> Last Friday I had to replace the original HP OfficeJet 7410 AIO because >> it would no longer feed paper. Other than that, it worked great despite >> our torture. >> >> The owner wanted a different brand, however, so I recommended this Canon, >> which I installed after removing the HP software and rebooting. However, >> we're having two problems that seem to be related: >> >> 1) When sending a print job to the queue when it's empty, the job will >> print and the last page of the job will eject, but the job remains in the >> queue. The computer appears to think that it hasn't finished sending the >> job. For instance, if I print a test page, it will send 72.1 KB of a >> 72.2 KB job and then wait ten minutes or so before clearing the queue. >> This happens printing other jobs/kinds of documents, as well. >> >> 2) The System Event Log shows many successive Event ID 54s from source >> "ousb2hub": >> >> Event Type: Warning >> Event Source: ousb2hub >> Event Category: None >> Event ID: 54 >> Date: 99/99/9999 >> Time: 99:99:99 AA >> User: N/A >> Computer: AAAAAA >> Description: >> The description for Event ID ( 54 ) in Source ( ousb2hub ) cannot be >> found. The local computer may not have the necessary registry information >> or message DLL files to display messages from a remote computer. You may >> be able to use the /AUXSOURCE= flag to retrieve this description; see >> Help and Support for details. The following information is part of the >> event: \Device\0000006c. >> Data: >> 0000: 00 00 00 00 01 00 5a 00 ......Z. >> 0008: 00 00 00 00 36 00 04 80 ....6..? >> 0010: 00 00 00 00 00 00 00 00 ........ >> 0018: 00 00 00 00 00 00 00 00 ........ >> 0020: 00 00 00 00 00 00 00 00 ........ >> >> I've called Canon and they have no idea about this. I tried uninstalling >> and reinstalling the USB hub and the printer, but that doesn't help >> either. >> >> I'll be very grateful for any ideas. >> >> -- >> David Dickinson >> eveningstar at mvps dot org >> >> > >
Guest Bob I Posted October 7, 2008 Posted October 7, 2008 Re: Event ID 54 in ousb2hub: Print jobs not clearing Have you tried this particular printer on a different port, or PC. Terry Preuit wrote: > I uninstalled all of the Canon software, including the driver that remained > in Server Properties. I restarted the machine and reinstalled the printer. > Same result. > > I'm don't believe this is a problem with the printer. I'm using this same > model on several other Windows XP machines with no problems. > > I'm stuck. > > David > > "David" wrote in message news:OY2KBpDKJHA.1308@TK2MSFTNGP02.phx.gbl... > >>Hi, Bob, >> >>Thanks for your reply. >> >>It turns out that the old HP driver was still listed in Server Properties. >>I removed it. All that's left are the fax and print drivers for the >>Canon, and two Amyuni PDF converter drivers used by Quickbooks and another >>application. >> >>After I removed the HP driver, I tried printing a test page and got the >>same result: it sent 77.4 KB of a 77.5 KB job, and did not clear the >>queue. >> >>I rebooted the machine with that job still in the queue, and after Windows >>started, it resent the test page to the printer with the same fershluginer >>result. It took about five minutes for the queue to clear, at which time >>the Event ID 54's from ousb2hub started appearing at a rate of 9 (yes, >>nine) per second for about ten seconds every 4 to 6 minutes or so. >> >>This seems pretty wierd to me. I'm going to uninstall the Canon and try >>this again. I'll write back with the results. >> >>David Dickinson >>eveningstar at mvps dot org >> >> >>"Bob I" <> wrote in message news:uQbk5o$JJHA.1160@TK2MSFTNGP05.phx.gbl... >>Does the HP still exist in the Print Server Properties? If so, remove it. >> >>Terry Preuit wrote: >> >> >>>Hello, >>> >>>Finished print jobs are getting stuck in the printer queue, causing >>>subsequent jobs to wait several minutes before they can be sent to the >>>printer. >>> >>>This is a Windows XP SP3 machine, with a new Canon PIXMMA MX700 >>>multifunction printer. >>> >>>Last Friday I had to replace the original HP OfficeJet 7410 AIO because >>>it would no longer feed paper. Other than that, it worked great despite >>>our torture. >>> >>>The owner wanted a different brand, however, so I recommended this Canon, >>>which I installed after removing the HP software and rebooting. However, >>>we're having two problems that seem to be related: >>> >>>1) When sending a print job to the queue when it's empty, the job will >>>print and the last page of the job will eject, but the job remains in the >>>queue. The computer appears to think that it hasn't finished sending the >>>job. For instance, if I print a test page, it will send 72.1 KB of a >>>72.2 KB job and then wait ten minutes or so before clearing the queue. >>>This happens printing other jobs/kinds of documents, as well. >>> >>>2) The System Event Log shows many successive Event ID 54s from source >>>"ousb2hub": >>> >>>Event Type: Warning >>>Event Source: ousb2hub >>>Event Category: None >>>Event ID: 54 >>>Date: 99/99/9999 >>>Time: 99:99:99 AA >>>User: N/A >>>Computer: AAAAAA >>>Description: >>>The description for Event ID ( 54 ) in Source ( ousb2hub ) cannot be >>>found. The local computer may not have the necessary registry information >>>or message DLL files to display messages from a remote computer. You may >>>be able to use the /AUXSOURCE= flag to retrieve this description; see >>>Help and Support for details. The following information is part of the >>>event: \Device\0000006c. >>>Data: >>>0000: 00 00 00 00 01 00 5a 00 ......Z. >>>0008: 00 00 00 00 36 00 04 80 ....6..? >>>0010: 00 00 00 00 00 00 00 00 ........ >>>0018: 00 00 00 00 00 00 00 00 ........ >>>0020: 00 00 00 00 00 00 00 00 ........ >>> >>>I've called Canon and they have no idea about this. I tried uninstalling >>>and reinstalling the USB hub and the printer, but that doesn't help >>>either. >>> >>>I'll be very grateful for any ideas. >>> >>>-- >>>David Dickinson >>>eveningstar at mvps dot org >>> >>> >> >> > >
Guest Alan Morris [MSFT] Posted October 8, 2008 Posted October 8, 2008 Re: Event ID 54 in ousb2hub: Print jobs not clearing Who wrote the ousb2hub file? Why are they posting this error? This file is not MS spooler file. -- Alan Morris Windows Printing Team Search the Microsoft Knowledge Base here: http://support.microsoft.com/search/?adv=1 This posting is provided "AS IS" with no warranties, and confers no rights. "Bob I" <birelan@yahoo.com> wrote in message news:ue0c72HKJHA.728@TK2MSFTNGP04.phx.gbl... > Have you tried this particular printer on a different port, or PC. > > Terry Preuit wrote: > >> I uninstalled all of the Canon software, including the driver that >> remained in Server Properties. I restarted the machine and reinstalled >> the printer. Same result. >> >> I'm don't believe this is a problem with the printer. I'm using this >> same model on several other Windows XP machines with no problems. >> >> I'm stuck. >> >> David >> >> "David" wrote in message news:OY2KBpDKJHA.1308@TK2MSFTNGP02.phx.gbl... >> >>>Hi, Bob, >>> >>>Thanks for your reply. >>> >>>It turns out that the old HP driver was still listed in Server >>>Properties. I removed it. All that's left are the fax and print drivers >>>for the Canon, and two Amyuni PDF converter drivers used by Quickbooks >>>and another application. >>> >>>After I removed the HP driver, I tried printing a test page and got the >>>same result: it sent 77.4 KB of a 77.5 KB job, and did not clear the >>>queue. >>> >>>I rebooted the machine with that job still in the queue, and after >>>Windows started, it resent the test page to the printer with the same >>>fershluginer result. It took about five minutes for the queue to clear, >>>at which time the Event ID 54's from ousb2hub started appearing at a rate >>>of 9 (yes, nine) per second for about ten seconds every 4 to 6 minutes or >>>so. >>> >>>This seems pretty wierd to me. I'm going to uninstall the Canon and try >>>this again. I'll write back with the results. >>> >>>David Dickinson >>>eveningstar at mvps dot org >>> >>> >>>"Bob I" <> wrote in message news:uQbk5o$JJHA.1160@TK2MSFTNGP05.phx.gbl... >>>Does the HP still exist in the Print Server Properties? If so, remove it. >>> >>>Terry Preuit wrote: >>> >>> >>>>Hello, >>>> >>>>Finished print jobs are getting stuck in the printer queue, causing >>>>subsequent jobs to wait several minutes before they can be sent to the >>>>printer. >>>> >>>>This is a Windows XP SP3 machine, with a new Canon PIXMMA MX700 >>>>multifunction printer. >>>> >>>>Last Friday I had to replace the original HP OfficeJet 7410 AIO because >>>>it would no longer feed paper. Other than that, it worked great despite >>>>our torture. >>>> >>>>The owner wanted a different brand, however, so I recommended this >>>>Canon, which I installed after removing the HP software and rebooting. >>>>However, we're having two problems that seem to be related: >>>> >>>>1) When sending a print job to the queue when it's empty, the job will >>>>print and the last page of the job will eject, but the job remains in >>>>the queue. The computer appears to think that it hasn't finished sending >>>>the job. For instance, if I print a test page, it will send 72.1 KB of >>>>a 72.2 KB job and then wait ten minutes or so before clearing the queue. >>>>This happens printing other jobs/kinds of documents, as well. >>>> >>>>2) The System Event Log shows many successive Event ID 54s from source >>>>"ousb2hub": >>>> >>>>Event Type: Warning >>>>Event Source: ousb2hub >>>>Event Category: None >>>>Event ID: 54 >>>>Date: 99/99/9999 >>>>Time: 99:99:99 AA >>>>User: N/A >>>>Computer: AAAAAA >>>>Description: >>>>The description for Event ID ( 54 ) in Source ( ousb2hub ) cannot be >>>>found. The local computer may not have the necessary registry >>>>information or message DLL files to display messages from a remote >>>>computer. You may be able to use the /AUXSOURCE= flag to retrieve this >>>>description; see Help and Support for details. The following information >>>>is part of the event: \Device\0000006c. >>>>Data: >>>>0000: 00 00 00 00 01 00 5a 00 ......Z. >>>>0008: 00 00 00 00 36 00 04 80 ....6..? >>>>0010: 00 00 00 00 00 00 00 00 ........ >>>>0018: 00 00 00 00 00 00 00 00 ........ >>>>0020: 00 00 00 00 00 00 00 00 ........ >>>> >>>>I've called Canon and they have no idea about this. I tried >>>>uninstalling and reinstalling the USB hub and the printer, but that >>>>doesn't help either. >>>> >>>>I'll be very grateful for any ideas. >>>> >>>>-- >>>>David Dickinson >>>>eveningstar at mvps dot org >>>> >>>> >>> >>> >> >> >
Guest Chuck Posted October 8, 2008 Posted October 8, 2008 Re: Event ID 54 in ousb2hub: Print jobs not clearing Given the name of the file, I'd suggest uninstalling the printer drivers, then the USB port and controller drivers. Reboot, and let windows reinstall the USB port and controller drivers. Then properly install the required printer drivers. Generally, this removes and properly reinstalls any links to the USB drivers. Some motherboards have board specific USB drivers that can be obtained from the OEM for the Mboard or the USB chipset on the board. Make sure that you have copies of any USB driven device drivers that are/were not included with windows. "Alan Morris [MSFT]" <alanmo@online.microsoft.com> wrote in message news:O2ZemGPKJHA.5460@TK2MSFTNGP03.phx.gbl... > Who wrote the ousb2hub file? Why are they posting this error? > > This file is not MS spooler file. > > -- > Alan Morris > Windows Printing Team > Search the Microsoft Knowledge Base here: > http://support.microsoft.com/search/?adv=1 > > This posting is provided "AS IS" with no warranties, and confers no > rights. > > "Bob I" <birelan@yahoo.com> wrote in message > news:ue0c72HKJHA.728@TK2MSFTNGP04.phx.gbl... >> Have you tried this particular printer on a different port, or PC. >> >> Terry Preuit wrote: >> >>> I uninstalled all of the Canon software, including the driver that >>> remained in Server Properties. I restarted the machine and reinstalled >>> the printer. Same result. >>> >>> I'm don't believe this is a problem with the printer. I'm using this >>> same model on several other Windows XP machines with no problems. >>> >>> I'm stuck. >>> >>> David >>> >>> "David" wrote in message news:OY2KBpDKJHA.1308@TK2MSFTNGP02.phx.gbl... >>> >>>>Hi, Bob, >>>> >>>>Thanks for your reply. >>>> >>>>It turns out that the old HP driver was still listed in Server >>>>Properties. I removed it. All that's left are the fax and print drivers >>>>for the Canon, and two Amyuni PDF converter drivers used by Quickbooks >>>>and another application. >>>> >>>>After I removed the HP driver, I tried printing a test page and got the >>>>same result: it sent 77.4 KB of a 77.5 KB job, and did not clear the >>>>queue. >>>> >>>>I rebooted the machine with that job still in the queue, and after >>>>Windows started, it resent the test page to the printer with the same >>>>fershluginer result. It took about five minutes for the queue to clear, >>>>at which time the Event ID 54's from ousb2hub started appearing at a >>>>rate of 9 (yes, nine) per second for about ten seconds every 4 to 6 >>>>minutes or so. >>>> >>>>This seems pretty wierd to me. I'm going to uninstall the Canon and try >>>>this again. I'll write back with the results. >>>> >>>>David Dickinson >>>>eveningstar at mvps dot org >>>> >>>> >>>>"Bob I" <> wrote in message >>>>news:uQbk5o$JJHA.1160@TK2MSFTNGP05.phx.gbl... >>>>Does the HP still exist in the Print Server Properties? If so, remove >>>>it. >>>> >>>>Terry Preuit wrote: >>>> >>>> >>>>>Hello, >>>>> >>>>>Finished print jobs are getting stuck in the printer queue, causing >>>>>subsequent jobs to wait several minutes before they can be sent to the >>>>>printer. >>>>> >>>>>This is a Windows XP SP3 machine, with a new Canon PIXMMA MX700 >>>>>multifunction printer. >>>>> >>>>>Last Friday I had to replace the original HP OfficeJet 7410 AIO because >>>>>it would no longer feed paper. Other than that, it worked great >>>>>despite our torture. >>>>> >>>>>The owner wanted a different brand, however, so I recommended this >>>>>Canon, which I installed after removing the HP software and rebooting. >>>>>However, we're having two problems that seem to be related: >>>>> >>>>>1) When sending a print job to the queue when it's empty, the job will >>>>>print and the last page of the job will eject, but the job remains in >>>>>the queue. The computer appears to think that it hasn't finished >>>>>sending the job. For instance, if I print a test page, it will send >>>>>72.1 KB of a 72.2 KB job and then wait ten minutes or so before >>>>>clearing the queue. This happens printing other jobs/kinds of >>>>>documents, as well. >>>>> >>>>>2) The System Event Log shows many successive Event ID 54s from source >>>>>"ousb2hub": >>>>> >>>>>Event Type: Warning >>>>>Event Source: ousb2hub >>>>>Event Category: None >>>>>Event ID: 54 >>>>>Date: 99/99/9999 >>>>>Time: 99:99:99 AA >>>>>User: N/A >>>>>Computer: AAAAAA >>>>>Description: >>>>>The description for Event ID ( 54 ) in Source ( ousb2hub ) cannot be >>>>>found. The local computer may not have the necessary registry >>>>>information or message DLL files to display messages from a remote >>>>>computer. You may be able to use the /AUXSOURCE= flag to retrieve this >>>>>description; see Help and Support for details. The following >>>>>information is part of the event: \Device\0000006c. >>>>>Data: >>>>>0000: 00 00 00 00 01 00 5a 00 ......Z. >>>>>0008: 00 00 00 00 36 00 04 80 ....6..? >>>>>0010: 00 00 00 00 00 00 00 00 ........ >>>>>0018: 00 00 00 00 00 00 00 00 ........ >>>>>0020: 00 00 00 00 00 00 00 00 ........ >>>>> >>>>>I've called Canon and they have no idea about this. I tried >>>>>uninstalling and reinstalling the USB hub and the printer, but that >>>>>doesn't help either. >>>>> >>>>>I'll be very grateful for any ideas. >>>>> >>>>>-- >>>>>David Dickinson >>>>>eveningstar at mvps dot org >>>>> >>>>> >>>> >>>> >>> >>> >> > >
Guest Terry Preuit Posted October 8, 2008 Posted October 8, 2008 Re: Event ID 54 in ousb2hub: Print jobs not clearing Thanks for all of your suggestions, folks. I have, indeed, tried uninstalling everything including the USB port and hub drivers and then rebooting, and then reinstalling the printer software. But I ended up with the same result. Being that my client needed a printer that worked, I chucked the Canon and went out and bought an HP Officejet Pro L7555 AIO. Same problem: Event ID 54 Warning from ousb2hub, and print jobs stay in the queue for several minutes after completion. ousb2hub.sys is the USB 2.0 hub v2.0.5.0 from OrangeWare Corporation. If I have to spend another sleepless night on this, I swear I'll give up computers and become a pastry chef. David Dickinson "Chuck" <cdkuder@msn.com> wrote in message news:eZI6NmRKJHA.5060@TK2MSFTNGP02.phx.gbl... > Given the name of the file, I'd suggest uninstalling the printer drivers, > then the USB port and controller drivers. > Reboot, and let windows reinstall the USB port and controller drivers. > Then properly install the required printer drivers. > Generally, this removes and properly reinstalls any links to the USB > drivers. Some motherboards have board specific USB drivers that can be > obtained from the OEM for the Mboard or the USB chipset on the board. Make > sure that you have copies of any USB driven device drivers that are/were > not included with windows. > > "Alan Morris [MSFT]" <alanmo@online.microsoft.com> wrote in message > news:O2ZemGPKJHA.5460@TK2MSFTNGP03.phx.gbl... >> Who wrote the ousb2hub file? Why are they posting this error? >> >> This file is not MS spooler file. >> >> -- >> Alan Morris >> Windows Printing Team >> Search the Microsoft Knowledge Base here: >> http://support.microsoft.com/search/?adv=1 >> >> This posting is provided "AS IS" with no warranties, and confers no >> rights. >> >> "Bob I" <birelan@yahoo.com> wrote in message >> news:ue0c72HKJHA.728@TK2MSFTNGP04.phx.gbl... >>> Have you tried this particular printer on a different port, or PC. >>> >>> Terry Preuit wrote: >>> >>>> I uninstalled all of the Canon software, including the driver that >>>> remained in Server Properties. I restarted the machine and reinstalled >>>> the printer. Same result. >>>> >>>> I'm don't believe this is a problem with the printer. I'm using this >>>> same model on several other Windows XP machines with no problems. >>>> >>>> I'm stuck. >>>> >>>> David >>>> >>>> "David" wrote in message news:OY2KBpDKJHA.1308@TK2MSFTNGP02.phx.gbl... >>>> >>>>>Hi, Bob, >>>>> >>>>>Thanks for your reply. >>>>> >>>>>It turns out that the old HP driver was still listed in Server >>>>>Properties. I removed it. All that's left are the fax and print >>>>>drivers for the Canon, and two Amyuni PDF converter drivers used by >>>>>Quickbooks and another application. >>>>> >>>>>After I removed the HP driver, I tried printing a test page and got the >>>>>same result: it sent 77.4 KB of a 77.5 KB job, and did not clear the >>>>>queue. >>>>> >>>>>I rebooted the machine with that job still in the queue, and after >>>>>Windows started, it resent the test page to the printer with the same >>>>>fershluginer result. It took about five minutes for the queue to >>>>>clear, at which time the Event ID 54's from ousb2hub started appearing >>>>>at a rate of 9 (yes, nine) per second for about ten seconds every 4 to >>>>>6 minutes or so. >>>>> >>>>>This seems pretty wierd to me. I'm going to uninstall the Canon and >>>>>try this again. I'll write back with the results. >>>>> >>>>>David Dickinson >>>>>eveningstar at mvps dot org >>>>> >>>>> >>>>>"Bob I" <> wrote in message >>>>>news:uQbk5o$JJHA.1160@TK2MSFTNGP05.phx.gbl... >>>>>Does the HP still exist in the Print Server Properties? If so, remove >>>>>it. >>>>> >>>>>Terry Preuit wrote: >>>>> >>>>> >>>>>>Hello, >>>>>> >>>>>>Finished print jobs are getting stuck in the printer queue, causing >>>>>>subsequent jobs to wait several minutes before they can be sent to the >>>>>>printer. >>>>>> >>>>>>This is a Windows XP SP3 machine, with a new Canon PIXMMA MX700 >>>>>>multifunction printer. >>>>>> >>>>>>Last Friday I had to replace the original HP OfficeJet 7410 AIO >>>>>>because it would no longer feed paper. Other than that, it worked >>>>>>great despite our torture. >>>>>> >>>>>>The owner wanted a different brand, however, so I recommended this >>>>>>Canon, which I installed after removing the HP software and rebooting. >>>>>>However, we're having two problems that seem to be related: >>>>>> >>>>>>1) When sending a print job to the queue when it's empty, the job will >>>>>>print and the last page of the job will eject, but the job remains in >>>>>>the queue. The computer appears to think that it hasn't finished >>>>>>sending the job. For instance, if I print a test page, it will send >>>>>>72.1 KB of a 72.2 KB job and then wait ten minutes or so before >>>>>>clearing the queue. This happens printing other jobs/kinds of >>>>>>documents, as well. >>>>>> >>>>>>2) The System Event Log shows many successive Event ID 54s from source >>>>>>"ousb2hub": >>>>>> >>>>>>Event Type: Warning >>>>>>Event Source: ousb2hub >>>>>>Event Category: None >>>>>>Event ID: 54 >>>>>>Date: 99/99/9999 >>>>>>Time: 99:99:99 AA >>>>>>User: N/A >>>>>>Computer: AAAAAA >>>>>>Description: >>>>>>The description for Event ID ( 54 ) in Source ( ousb2hub ) cannot be >>>>>>found. The local computer may not have the necessary registry >>>>>>information or message DLL files to display messages from a remote >>>>>>computer. You may be able to use the /AUXSOURCE= flag to retrieve this >>>>>>description; see Help and Support for details. The following >>>>>>information is part of the event: \Device\0000006c. >>>>>>Data: >>>>>>0000: 00 00 00 00 01 00 5a 00 ......Z. >>>>>>0008: 00 00 00 00 36 00 04 80 ....6..? >>>>>>0010: 00 00 00 00 00 00 00 00 ........ >>>>>>0018: 00 00 00 00 00 00 00 00 ........ >>>>>>0020: 00 00 00 00 00 00 00 00 ........ >>>>>> >>>>>>I've called Canon and they have no idea about this. I tried >>>>>>uninstalling and reinstalling the USB hub and the printer, but that >>>>>>doesn't help either. >>>>>> >>>>>>I'll be very grateful for any ideas. >>>>>> >>>>>>-- >>>>>>David Dickinson >>>>>>eveningstar at mvps dot org >>>>>> >>>>>> >>>>> >>>>> >>>> >>>> >>> >> >> > >
Recommended Posts