WD external drive not playing well

[Guest Joe Starin]

Dell laptop, Windows XP Home, one play/burn DVD drive.

 

Have a Western Digital My Book Essential USB 2.0 320GB external drive.

Whenever I connect this external drive then power up, I get a black screen

and nothing else -- as soon as I disconnect the drive, Windows boots

immediately.

 

When I connect the drive AFTER the laptop is running, all processes seem to

slow down or stop. Every simple click takes 2 to 3 minutes or the request

won't complete at all. Can barely run Belarc Advisor. Can barely view "My

Computer." Can barely even switch Web pages. Not a crash but I get a very

long hourglass no matter what I do and/or this error message:

 

"The specified I/O operation on \Device\HARDDISK1\DR14 was not complete

before the time-out period expired."

 

When I disconnect the external hard drive -- instant response and the

process completes.

 

I finally find out that the WD is the F drive. The drive shows up using a

Right Click on My Computer / Manage / Disk Management. I see all the drives,

including the WD. But my Windows XP backup program does not see the F

drive - only the E drive and I'm asked to insert a disk into the drive. When

I try to change the target drive to F using the "Save as" menu, I get the

long pause and this message: "F:\ is not accessible. The semaphore time-out

period has expired."

 

So, I close the backup program. Can't even copy the "My Documents" folder

manually using a simple COPY command -- everything hangs up, hourglass time.

 

I need to back up my system immediately and am at a loss. WD has not yet

responded -- and likely will not be of much help given my previous

experience with their tech support when installing a new WD internal hard

drive earlier this year in another PC. They just gave up.

 

Anyone have any thoughts? Can't seem to get to first base here. Thank you.

 

Joe

 

 

--

Joseph R. Starin

2025 Radcliffe Drive

Westlake, Ohio 44145-3246

440.223.TEXT (8398)

email: joestarin@ameritech.net

blog: http://www.joecalled.blogspot.com

"Business writing that leaves a mark."

[Guest Patrick Keenan]

Re: WD external drive not playing well

 

 

"Joe Starin" <joespamfreestarin@ameritech.net> wrote in message

news:Dz4Ik.3275$c45.1294@nlpi065.nbdc.sbc.com...

> Dell laptop, Windows XP Home, one play/burn DVD drive.

>

> Have a Western Digital My Book Essential USB 2.0 320GB external drive.

> Whenever I connect this external drive then power up, I get a black screen

> and nothing else -- as soon as I disconnect the drive, Windows boots

> immediately.

>

> When I connect the drive AFTER the laptop is running, all processes seem

> to slow down or stop. Every simple click takes 2 to 3 minutes or the

> request won't complete at all. Can barely run Belarc Advisor. Can barely

> view "My Computer." Can barely even switch Web pages. Not a crash but I

> get a very long hourglass no matter what I do and/or this error message:

>

> "The specified I/O operation on \Device\HARDDISK1\DR14 was not complete

> before the time-out period expired."

>

> When I disconnect the external hard drive -- instant response and the

> process completes.

>

> I finally find out that the WD is the F drive. The drive shows up using a

> Right Click on My Computer / Manage / Disk Management. I see all the

> drives, including the WD. But my Windows XP backup program does not see

> the F drive - only the E drive and I'm asked to insert a disk into the

> drive. When I try to change the target drive to F using the "Save as"

> menu, I get the long pause and this message: "F:\ is not accessible. The

> semaphore time-out period has expired."

>

> So, I close the backup program. Can't even copy the "My Documents" folder

> manually using a simple COPY command -- everything hangs up, hourglass

> time.

>

> I need to back up my system immediately and am at a loss. WD has not yet

> responded -- and likely will not be of much help given my previous

> experience with their tech support when installing a new WD internal hard

> drive earlier this year in another PC. They just gave up.

>

> Anyone have any thoughts? Can't seem to get to first base here. Thank you.

>

> Joe

>

 

The first thought is that it isn't a good idea to post personal info to

Usenet.

 

Second, to the point, there are actually two components here, the drive

itself, and the case it's in. And it's probably the USB2 interface

circuitry in the case that's causing the problem. The drive itself isn't

likely to be at fault.

 

Some Dell systems have problems with some USB drives, or more properly

interface circuits, where booting can fail or be hopelessly slow with the

devices attached.

 

So, you might want to try getting a $25 - $30 plain USB2 case or adapter and

moving the drive over there to test. If it works properly, you can be

pretty sure that the problem is with the WD case's circuitry.

 

HTH

-pk

>

[Guest Twayne]

Re: WD external drive not playing well

 

> "Joe Starin" <joespamfreestarin@ameritech.net> wrote in message

> news:Dz4Ik.3275$c45.1294@nlpi065.nbdc.sbc.com...

>> Dell laptop, Windows XP Home, one play/burn DVD drive.

>>

>> Have a Western Digital My Book Essential USB 2.0 320GB external

>> drive. Whenever I connect this external drive then power up, I get a

>> black screen and nothing else -- as soon as I disconnect the drive,

>> Windows boots immediately.

>>

>> When I connect the drive AFTER the laptop is running, all processes

>> seem to slow down or stop. Every simple click takes 2 to 3 minutes

>> or the request won't complete at all. Can barely run Belarc Advisor.

>> Can barely view "My Computer." Can barely even switch Web pages. Not

>> a crash but I get a very long hourglass no matter what I do and/or

>> this error message: "The specified I/O operation on

>> \Device\HARDDISK1\DR14 was not

>> complete before the time-out period expired."

>>

>> When I disconnect the external hard drive -- instant response and the

>> process completes.

>>

>> I finally find out that the WD is the F drive. The drive shows up

>> using a Right Click on My Computer / Manage / Disk Management. I see

>> all the drives, including the WD. But my Windows XP backup program

>> does not see the F drive - only the E drive and I'm asked to insert

>> a disk into the drive. When I try to change the target drive to F

>> using the "Save as" menu, I get the long pause and this message:

>> "F:\ is not accessible. The semaphore time-out period has expired."

>>

>> So, I close the backup program. Can't even copy the "My Documents"

>> folder manually using a simple COPY command -- everything hangs up,

>> hourglass time.

>>

>> I need to back up my system immediately and am at a loss. WD has not

>> yet responded -- and likely will not be of much help given my

>> previous experience with their tech support when installing a new WD

>> internal hard drive earlier this year in another PC. They just gave

>> up. Anyone have any thoughts? Can't seem to get to first base here.

>> Thank you. Joe

>>

>

> The first thought is that it isn't a good idea to post personal info

> to Usenet.

>

> Second, to the point, there are actually two components here, the

> drive itself, and the case it's in. And it's probably the USB2

> interface circuitry in the case that's causing the problem. The

> drive itself isn't likely to be at fault.

>

> Some Dell systems have problems with some USB drives, or more properly

> interface circuits, where booting can fail or be hopelessly slow with

> the devices attached.

>

> So, you might want to try getting a $25 - $30 plain USB2 case or

> adapter and moving the drive over there to test. If it works

> properly, you can be pretty sure that the problem is with the WD

> case's circuitry.

> HTH

> -pk

 

to the OP:

 

And try using a different USB port on your PC and perhaps a different

cable, too. Longshots but they're really aggravating to find later than

sooner to be the problem.

I am assuming you DO have more than one USB port in use, right? So at

least you know that USB in the computer is functional? If you don't

have other USB devices working, you need to connect something just to be

sure it is working.

 

Actually, it sounds like a power problem with the external drive case.

The advice to try another case is good and likely, IMO, to solve your

issues. At the same time it's not unheard of for drives to fail

prematurely either, so ... you have to be prepared. Fortunately drives

that size are very cheap right now. Up to about 500 Gig seems to be

very reasonably priced at the moment.

 

1. Prove the PC USB works.

2. Prove the cabling/connector are good.

3. Change the case & guts; see what happens.

No joy? You might be looking at a bad drive. In my WD Ebook it's a

standard disk drive so it's possible to take it out and mount it inside

the computer. It's just a standard EIDE type drive. Check though; WD

also makes SATA versions of those drives.