Guest Rayson Posted October 15, 2008 Posted October 15, 2008 Error returned while creating the volume shadow copy:0x8007000e. Symptom is exactly as described in hotfix 907875. However as SP2 already included fixes for 907875, cannot apply it any more. Not able to follow workaround solution as no boot.ini file can be found. Re-registered the vss services only work for two days and failed again. Server configuration: Intel Xeon 3GHz 1GB memory hard disk 150GB, only using 30GB of it maximum page file size set to 4GB Any suggestion?
Guest Edwin vMierlo [MVP] Posted October 15, 2008 Posted October 15, 2008 Re: SBS 2003 SP2 backup failed with error creating volume shadow copy you can find the boot.ini on the root of the C:\ drive It is hidden and flagged as a system file, on the CMD prompt type: C:\>attrib boot.ini and you can see the file rgds, Edwin. "Rayson" <Rayson@discussions.microsoft.com> wrote in message news:09864962-6598-4BBD-813C-9F0842BD439D@microsoft.com... > Error returned while creating the volume shadow copy:0x8007000e. > Symptom is exactly as described in hotfix 907875. > However as SP2 already included fixes for 907875, cannot apply it any more. > Not able to follow workaround solution as no boot.ini file can be found. > Re-registered the vss services only work for two days and failed again. > Server configuration: > Intel Xeon 3GHz > 1GB memory > hard disk 150GB, only using 30GB of it > maximum page file size set to 4GB > > Any suggestion?
Guest Rayson Posted October 16, 2008 Posted October 16, 2008 Re: SBS 2003 SP2 backup failed with error creating volume shadow c Re: SBS 2003 SP2 backup failed with error creating volume shadow c Thanks, Edwin. However there is no /3GB switch as mentioned in the workaround solution of 907875! "Edwin vMierlo [MVP]" wrote: > you can find the boot.ini on the root of the C:\ drive > It is hidden and flagged as a system file, on the CMD prompt type: > > C:\>attrib boot.ini > > and you can see the file > > rgds, > Edwin. > > > "Rayson" <Rayson@discussions.microsoft.com> wrote in message > news:09864962-6598-4BBD-813C-9F0842BD439D@microsoft.com... > > Error returned while creating the volume shadow copy:0x8007000e. > > Symptom is exactly as described in hotfix 907875. > > However as SP2 already included fixes for 907875, cannot apply it any > more. > > Not able to follow workaround solution as no boot.ini file can be found. > > Re-registered the vss services only work for two days and failed again. > > Server configuration: > > Intel Xeon 3GHz > > 1GB memory > > hard disk 150GB, only using 30GB of it > > maximum page file size set to 4GB > > > > Any suggestion? > > >
Guest Edwin vMierlo [MVP] Posted October 16, 2008 Posted October 16, 2008 Re: SBS 2003 SP2 backup failed with error creating volume shadow c Re: SBS 2003 SP2 backup failed with error creating volume shadow c do you actually get the Event ID 21 in the event log ? please copy the event into a post any other errors at that time, or leading up to it ? thanks, Edwin. "Rayson" <Rayson@discussions.microsoft.com> wrote in message news:28285F58-40F8-438F-B0DF-BE9655631986@microsoft.com... > Thanks, Edwin. > However there is no /3GB switch as mentioned in the workaround solution of > 907875! > > "Edwin vMierlo [MVP]" wrote: > > > you can find the boot.ini on the root of the C:\ drive > > It is hidden and flagged as a system file, on the CMD prompt type: > > > > C:\>attrib boot.ini > > > > and you can see the file > > > > rgds, > > Edwin. > > > > > > "Rayson" <Rayson@discussions.microsoft.com> wrote in message > > news:09864962-6598-4BBD-813C-9F0842BD439D@microsoft.com... > > > Error returned while creating the volume shadow copy:0x8007000e. > > > Symptom is exactly as described in hotfix 907875. > > > However as SP2 already included fixes for 907875, cannot apply it any > > more. > > > Not able to follow workaround solution as no boot.ini file can be found. > > > Re-registered the vss services only work for two days and failed again. > > > Server configuration: > > > Intel Xeon 3GHz > > > 1GB memory > > > hard disk 150GB, only using 30GB of it > > > maximum page file size set to 4GB > > > > > > Any suggestion? > > > > > >
Guest Rayson Posted October 17, 2008 Posted October 17, 2008 Re: SBS 2003 SP2 backup failed with error creating volume shadow c Re: SBS 2003 SP2 backup failed with error creating volume shadow c Yes, detail event log and backup log included below. In the event log, there were 6 information messages before the error and 4 information messages after that. They are: Info --> The Removable Storage service was successfully sent a start control. Info --> The Removable Storage service entered the running state. Info --> The Volume Shadow Copy service was successfully sent a start control. Info --> The Volume Shadow Copy service entered the running state. Info --> The Microsoft Software Shadow Copy Provider service was successfully sent a start control. Info --> The Microsoft Software Shadow Copy Provider service entered the running state. Error --> The flush and hold operation for volume C: was aborted because of low available system memory. Info --> RSM was stopped. Info --> The Removable Storage service entered the stopped state. Info --> The Volume Shadow Copy service entered the stopped state. Info --> The Microsoft Software Shadow Copy Provider service entered the stopped state. Detail event log Event Type: Error Event Source: VolSnap Event Category: None Event ID: 21 Date: 10/14/2008 Time: 11:01:48 PM User: N/A Computer: SBS Description: The flush and hold operation for volume C: was aborted because of low available system memory. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 00 00 00 00 02 00 58 00 ......X. 0008: 00 00 00 00 15 00 06 c0 .......A 0010: 03 00 00 00 9a 00 00 c0 ....?..A 0018: 00 00 00 00 00 00 00 00 ........ 0020: 00 00 00 00 00 00 00 00 ........ Detail backup log 14/10/2008 23:00 ------------------------------- Date: 14/10/2008 Time: 23:00 User: SYSTEM ------------------------------- Backup Runner started. Launching NTBackup: ntbackup.exe backup "@C:\Program Files\Microsoft Windows Small Business Server\Backup\Small Business Backup Script.bks" /d "SBS Backup created on 14/10/2008 at 23:00" /v:yes /r:no /rs:no /hc:off /m normal /j "Small Business Server Backup Job" /l:s /f "\\nas\sbsbackup\Backup Files\Small Business Server Backup (02).bkf" /UM NTBACKUP LOG FILE: C:\Documents and Settings\SBS Backup User\Local Settings\Application Data\Microsoft\Windows NT\NTBackup\data\backup05.log =====================<BEGIN NTBACKUP LOG FILE>===================== Backup Status Operation: Backup Active backup destination: File Media name: "Small Business Server Backup (02).bkf created 14/10/2008 at 23:00" Volume shadow copy creation: Attempt 1. Error returned while creating the volume shadow copy:0x8007000e. Error returned while creating the volume shadow copy:Not enough storage is available to complete this operation. Aborting Backup. ---------------------- The operation did not successfully complete. ---------------------- =======================<END NTBACKUP LOG FILE>===================== NTBackup finished the backup with errors. For more information about failed backups, see the article on troubleshooting your backup at the following Web page: http://go.microsoft.com/fwlink/?LinkId=18414 Backup ended at Tuesday, 14 October, 2008 23:02 Backup Runner finished. "Edwin vMierlo [MVP]" wrote: > do you actually get the Event ID 21 in the event log ? > > please copy the event into a post > > any other errors at that time, or leading up to it ? > > thanks, > Edwin. > > > > "Rayson" <Rayson@discussions.microsoft.com> wrote in message > news:28285F58-40F8-438F-B0DF-BE9655631986@microsoft.com... > > Thanks, Edwin. > > However there is no /3GB switch as mentioned in the workaround solution of > > 907875! > > > > "Edwin vMierlo [MVP]" wrote: > > > > > you can find the boot.ini on the root of the C:\ drive > > > It is hidden and flagged as a system file, on the CMD prompt type: > > > > > > C:\>attrib boot.ini > > > > > > and you can see the file > > > > > > rgds, > > > Edwin. > > > > > > > > > "Rayson" <Rayson@discussions.microsoft.com> wrote in message > > > news:09864962-6598-4BBD-813C-9F0842BD439D@microsoft.com... > > > > Error returned while creating the volume shadow copy:0x8007000e. > > > > Symptom is exactly as described in hotfix 907875. > > > > However as SP2 already included fixes for 907875, cannot apply it any > > > more. > > > > Not able to follow workaround solution as no boot.ini file can be > found. > > > > Re-registered the vss services only work for two days and failed > again. > > > > Server configuration: > > > > Intel Xeon 3GHz > > > > 1GB memory > > > > hard disk 150GB, only using 30GB of it > > > > maximum page file size set to 4GB > > > > > > > > Any suggestion? > > > > > > > > > > > >
Recommended Posts