Guest MarcusB Posted October 18, 2008 Posted October 18, 2008 We have network with 10 windows servers and 2 windows 2003 domain controlers. Domain is in Windows 2003 native mode. We want to go to Windows 2008 native mode to have such services like new DFS service etc.. What is the best and simplest way to move to Windows 2008 native mode. We will buy new hardware for some servers but the old will remain for some time. Our domain controlers are also DNS and DHCP servers and they need to ramain on the same IP number. How to start and go on with the process? MarcusB
Guest Meinolf Weber Posted October 18, 2008 Posted October 18, 2008 Re: Moving from Win 2003 to Windows 2008 domain Hello MarcusB, If you have to keep the names of the DC's an inplace upgrade of the server is the easiest way. Is the hardware sufficient for 2008? Best regards Meinolf Weber Disclaimer: This posting is provided "AS IS" with no warranties, and confers no rights. ** Please do NOT email, only reply to Newsgroups ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm > We have network with 10 windows servers and 2 windows 2003 domain > controlers. Domain is in Windows 2003 native mode. > We want to go to Windows 2008 native mode to have such services like > new > DFS service etc.. > What is the best and simplest way to move to Windows 2008 native mode. > We will buy new hardware for some servers but the old will remain for > some time. Our domain controlers are also DNS and DHCP servers and > they > need to ramain on the same IP number. > How to start and go on with the process? > MarcusB >
Guest MarcusB Posted October 18, 2008 Posted October 18, 2008 Re: Moving from Win 2003 to Windows 2008 domain The problem is complicated because we would like to move to the new hardware but on place migration is very atractive. Our domain controlers should have the same names and should have the same IP numbers , because they are also DNS servers. Any good suggestion? THe old domain controlers are running Windows 2003 server standard eddition. The new will run Windows 2008 Enterprise Edt. How to move it this situation DNS servers. We can not have longer stop than 4 hours during the night. Can we start new server, promote them to Domain controlers and chaneg IP and name later? Regards MarcusB toMeinolf Weber wrote: > Hello MarcusB, > > If you have to keep the names of the DC's an inplace upgrade of the > server is the easiest way. Is the hardware sufficient for 2008? > > Best regards > > Meinolf Weber > Disclaimer: This posting is provided "AS IS" with no warranties, and > confers no rights. > ** Please do NOT email, only reply to Newsgroups > ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm > >> We have network with 10 windows servers and 2 windows 2003 domain >> controlers. Domain is in Windows 2003 native mode. >> We want to go to Windows 2008 native mode to have such services like >> new >> DFS service etc.. >> What is the best and simplest way to move to Windows 2008 native mode. >> We will buy new hardware for some servers but the old will remain for >> some time. Our domain controlers are also DNS and DHCP servers and >> they >> need to ramain on the same IP number. >> How to start and go on with the process? >> MarcusB >> > >
Guest Meinolf Weber Posted October 18, 2008 Posted October 18, 2008 Re: Moving from Win 2003 to Windows 2008 domain Hello MarcusB, If your concern is only DNS, then i would add new DC's to the domain. The servernames are not that important, except you use the names for some app's that are need to keep the name. If you use AD integrated zones on DNS, all new DC/DNS servers will get the complete zone information replicated and are full writable. Personally i would add new DC's, move the FSMO roles to a 2008 DC, make all new DC's Global catalog and DNS server. For the clients change the DNS server ip addresses to the new ones, i assume you use DHCP, so this is easy done. If you can describe the need for the same names, maybe we find another solution without the same name. Ofcourse you can install a new server, demote one of the old and rename it and change the ip. Then you can use the free name/ip address for the new server and promote it then to DC. Best regards Meinolf Weber Disclaimer: This posting is provided "AS IS" with no warranties, and confers no rights. ** Please do NOT email, only reply to Newsgroups ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm > The problem is complicated because we would like to move to the new > hardware but on place migration is very atractive. Our domain > controlers should have the same names and should have the same IP > numbers , because they are also DNS servers. Any good suggestion? > > THe old domain controlers are running Windows 2003 server standard > eddition. The new will run Windows 2008 Enterprise Edt. > > How to move it this situation DNS servers. We can not have longer stop > than 4 hours during the night. > > Can we start new server, promote them to Domain controlers and chaneg > IP and name later? > > Regards > MarcusB > toMeinolf Weber wrote: > >> Hello MarcusB, >> >> If you have to keep the names of the DC's an inplace upgrade of the >> server is the easiest way. Is the hardware sufficient for 2008? >> >> Best regards >> >> Meinolf Weber >> Disclaimer: This posting is provided "AS IS" with no warranties, and >> confers no rights. >> ** Please do NOT email, only reply to Newsgroups >> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm >>> We have network with 10 windows servers and 2 windows 2003 domain >>> controlers. Domain is in Windows 2003 native mode. >>> We want to go to Windows 2008 native mode to have such services like >>> new >>> DFS service etc.. >>> What is the best and simplest way to move to Windows 2008 native >>> mode. >>> We will buy new hardware for some servers but the old will remain >>> for >>> some time. Our domain controlers are also DNS and DHCP servers and >>> they >>> need to ramain on the same IP number. >>> How to start and go on with the process? >>> MarcusB
Guest MarcusB Posted October 18, 2008 Posted October 18, 2008 Re: Moving from Win 2003 to Windows 2008 domain I can not change the IP number of our primary and secondary DNS which are connected to the internet. The DNS server which will be on the Windows 2008 domain controler need to have the same IP number as the old one. The reason is that upper DNS server in our ISP provider have NS records which point to our old DNS ip number. Is it possible to change IP number of the domain controler without any problem? MarcusB Meinolf Weber wrote: > Hello MarcusB, > > If your concern is only DNS, then i would add new DC's to the domain. > The servernames are not that important, except you use the names for > some app's that are need to keep the name. If you use AD integrated > zones on DNS, all new DC/DNS servers will get the complete zone > information replicated and are full writable. > > Personally i would add new DC's, move the FSMO roles to a 2008 DC, make > all new DC's Global catalog and DNS server. For the clients change the > DNS server ip addresses to the new ones, i assume you use DHCP, so this > is easy done. > > If you can describe the need for the same names, maybe we find another > solution without the same name. Ofcourse you can install a new server, > demote one of the old and rename it and change the ip. Then you can use > the free name/ip address for the new server and promote it then to DC. > > Best regards > > Meinolf Weber > Disclaimer: This posting is provided "AS IS" with no warranties, and > confers no rights. > ** Please do NOT email, only reply to Newsgroups > ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm > >> The problem is complicated because we would like to move to the new >> hardware but on place migration is very atractive. Our domain >> controlers should have the same names and should have the same IP >> numbers , because they are also DNS servers. Any good suggestion? >> >> THe old domain controlers are running Windows 2003 server standard >> eddition. The new will run Windows 2008 Enterprise Edt. >> >> How to move it this situation DNS servers. We can not have longer stop >> than 4 hours during the night. >> >> Can we start new server, promote them to Domain controlers and chaneg >> IP and name later? >> >> Regards >> MarcusB >> toMeinolf Weber wrote: >> >>> Hello MarcusB, >>> >>> If you have to keep the names of the DC's an inplace upgrade of the >>> server is the easiest way. Is the hardware sufficient for 2008? >>> >>> Best regards >>> >>> Meinolf Weber >>> Disclaimer: This posting is provided "AS IS" with no warranties, and >>> confers no rights. >>> ** Please do NOT email, only reply to Newsgroups >>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm >>>> We have network with 10 windows servers and 2 windows 2003 domain >>>> controlers. Domain is in Windows 2003 native mode. >>>> We want to go to Windows 2008 native mode to have such services like >>>> new >>>> DFS service etc.. >>>> What is the best and simplest way to move to Windows 2008 native >>>> mode. >>>> We will buy new hardware for some servers but the old will remain >>>> for >>>> some time. Our domain controlers are also DNS and DHCP servers and >>>> they >>>> need to ramain on the same IP number. >>>> How to start and go on with the process? >>>> MarcusB > >
Guest Meinolf Weber Posted October 18, 2008 Posted October 18, 2008 Re: Moving from Win 2003 to Windows 2008 domain Hello MarcusB, You can change the ip of a DC without problem, make sure that it changes the record in DNS after rebooting the server. Best regards Meinolf Weber Disclaimer: This posting is provided "AS IS" with no warranties, and confers no rights. ** Please do NOT email, only reply to Newsgroups ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm > I can not change the IP number of our primary and secondary DNS which > are connected to the internet. The DNS server which will be on the > Windows 2008 domain controler need to have the same IP number as the > old one. The reason is that upper DNS server in our ISP provider have > NS records which point to our old DNS ip number. > > Is it possible to change IP number of the domain controler without any > problem? > > MarcusB > > Meinolf Weber wrote: > >> Hello MarcusB, >> >> If your concern is only DNS, then i would add new DC's to the domain. >> The servernames are not that important, except you use the names for >> some app's that are need to keep the name. If you use AD integrated >> zones on DNS, all new DC/DNS servers will get the complete zone >> information replicated and are full writable. >> >> Personally i would add new DC's, move the FSMO roles to a 2008 DC, >> make all new DC's Global catalog and DNS server. For the clients >> change the DNS server ip addresses to the new ones, i assume you use >> DHCP, so this is easy done. >> >> If you can describe the need for the same names, maybe we find >> another solution without the same name. Ofcourse you can install a >> new server, demote one of the old and rename it and change the ip. >> Then you can use the free name/ip address for the new server and >> promote it then to DC. >> >> Best regards >> >> Meinolf Weber >> Disclaimer: This posting is provided "AS IS" with no warranties, and >> confers no rights. >> ** Please do NOT email, only reply to Newsgroups >> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm >>> The problem is complicated because we would like to move to the new >>> hardware but on place migration is very atractive. Our domain >>> controlers should have the same names and should have the same IP >>> numbers , because they are also DNS servers. Any good suggestion? >>> >>> THe old domain controlers are running Windows 2003 server standard >>> eddition. The new will run Windows 2008 Enterprise Edt. >>> >>> How to move it this situation DNS servers. We can not have longer >>> stop than 4 hours during the night. >>> >>> Can we start new server, promote them to Domain controlers and >>> chaneg IP and name later? >>> >>> Regards >>> MarcusB >>> toMeinolf Weber wrote: >>>> Hello MarcusB, >>>> >>>> If you have to keep the names of the DC's an inplace upgrade of the >>>> server is the easiest way. Is the hardware sufficient for 2008? >>>> >>>> Best regards >>>> >>>> Meinolf Weber >>>> Disclaimer: This posting is provided "AS IS" with no warranties, >>>> and >>>> confers no rights. >>>> ** Please do NOT email, only reply to Newsgroups >>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm >>>>> We have network with 10 windows servers and 2 windows 2003 domain >>>>> controlers. Domain is in Windows 2003 native mode. >>>>> We want to go to Windows 2008 native mode to have such services >>>>> like >>>>> new >>>>> DFS service etc.. >>>>> What is the best and simplest way to move to Windows 2008 native >>>>> mode. >>>>> We will buy new hardware for some servers but the old will remain >>>>> for >>>>> some time. Our domain controlers are also DNS and DHCP servers and >>>>> they >>>>> need to ramain on the same IP number. >>>>> How to start and go on with the process? >>>>> MarcusB
Recommended Posts