Guest Dale Posted October 27, 2008 Posted October 27, 2008 I get this error only after a weekly reboot. Is there a process not loading up before hand? should I be concerned about this? Is it updating at other times during the week? Windows cannot access the file gpt.ini for GPO CN={6AC1786C-016F-11D2-945F-00C04fB984F9},CN=Policies,CN=System,DC=mydomain,DC=com. The file must be present at the location <\\mydomain.com\sysvol\mydomain.com\Policies\{6AC1786C-016F-11D2-945F-00C04fB984F9}\gpt.ini>. (The network path was not found. ). Group Policy processing aborted. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Group policies are being applied. The link revealed nothing to me. Any suggestions would be greatly appreciated
Guest Thee Chicago Wolf Posted October 27, 2008 Posted October 27, 2008 Re: Error 1058 Userenv >Windows cannot access the file gpt.ini for GPO See if the info here is of any use: http://eventid.net/display.asp?eventid=1058&eventno=1752&source=Userenv&phase=1 - Thee Chicago Wolf
Guest Meinolf Weber Posted October 27, 2008 Posted October 27, 2008 Re: Error 1058 Userenv Hello Dale, Is it a workstation or domain controller and what OS are you using. If DC, is it also DNS server? Do you have any other event viewer errors? Best regards Meinolf Weber Disclaimer: This posting is provided "AS IS" with no warranties, and confers no rights. ** Please do NOT email, only reply to Newsgroups ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm > I get this error only after a weekly reboot. Is there a process not > loading up before hand? should I be concerned about this? Is it > updating at other times during the week? > > Windows cannot access the file gpt.ini for GPO > CN={6AC1786C-016F-11D2-945F-00C04fB984F9},CN=Policies,CN=System,DC=myd > omain,DC=com. The file must be present at the location > <\\mydomain.com\sysvol\mydomain.com\Policies\{6AC1786C-016F-11D2-945F- > 00C04fB984F9}\gpt.ini>. (The network path was not found. ). Group > Policy processing aborted. > > For more information, see Help and Support Center at > http://go.microsoft.com/fwlink/events.asp. > > Group policies are being applied. The link revealed nothing to me. Any > suggestions would be greatly appreciated >
Guest Dale Posted October 27, 2008 Posted October 27, 2008 Re: Error 1058 Userenv Meinolf, Thanks for the quick reply. It is a DC and also DNS server. Running Server 2003 SP1 with all patches applied except SP2. There are 2 other errors that occur at the same time during the reboot process. This one before it: Windows cannot determine the user or computer name. (The system detected a possible attempt to compromise security. Please ensure that you can contact the server that authenticated you. ). Group Policy processing aborted. And this one after it: Windows cannot query for the list of Group Policy objects. Check the event log for possible messages previously logged by the policy engine that describes the reason for this. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. "Meinolf Weber" wrote: > Hello Dale, > > Is it a workstation or domain controller and what OS are you using. If DC, > is it also DNS server? Do you have any other event viewer errors? > > Best regards > > Meinolf Weber > Disclaimer: This posting is provided "AS IS" with no warranties, and confers > no rights. > ** Please do NOT email, only reply to Newsgroups > ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm > > > > I get this error only after a weekly reboot. Is there a process not > > loading up before hand? should I be concerned about this? Is it > > updating at other times during the week? > > > > Windows cannot access the file gpt.ini for GPO > > CN={6AC1786C-016F-11D2-945F-00C04fB984F9},CN=Policies,CN=System,DC=myd > > omain,DC=com. The file must be present at the location > > <\\mydomain.com\sysvol\mydomain.com\Policies\{6AC1786C-016F-11D2-945F- > > 00C04fB984F9}\gpt.ini>. (The network path was not found. ). Group > > Policy processing aborted. > > > > For more information, see Help and Support Center at > > http://go.microsoft.com/fwlink/events.asp. > > > > Group policies are being applied. The link revealed nothing to me. Any > > suggestions would be greatly appreciated > > > > >
Guest Meinolf Weber Posted October 27, 2008 Posted October 27, 2008 Re: Error 1058 Userenv Hello Dale, Please post the complete event viewer entries. Is this the only DC/DNS in your domain? Best regards Meinolf Weber Disclaimer: This posting is provided "AS IS" with no warranties, and confers no rights. ** Please do NOT email, only reply to Newsgroups ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm > Meinolf, > > Thanks for the quick reply. > It is a DC and also DNS server. Running Server 2003 SP1 with all > patches > applied except SP2. > There are 2 other errors that occur at the same time during the reboot > process. This one before it: > > Windows cannot determine the user or computer name. (The system > detected a possible attempt to compromise security. Please ensure > that you can contact the server that authenticated you. ). Group > Policy processing aborted. > > And this one after it: > > Windows cannot query for the list of Group Policy objects. Check the > event log for possible messages previously logged by the policy engine > that describes the reason for this. > > For more information, see Help and Support Center at > http://go.microsoft.com/fwlink/events.asp. > > "Meinolf Weber" wrote: > >> Hello Dale, >> >> Is it a workstation or domain controller and what OS are you using. >> If DC, is it also DNS server? Do you have any other event viewer >> errors? >> >> Best regards >> >> Meinolf Weber >> Disclaimer: This posting is provided "AS IS" with no warranties, and >> confers >> no rights. >> ** Please do NOT email, only reply to Newsgroups >> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm >>> I get this error only after a weekly reboot. Is there a process not >>> loading up before hand? should I be concerned about this? Is it >>> updating at other times during the week? >>> >>> Windows cannot access the file gpt.ini for GPO >>> CN={6AC1786C-016F-11D2-945F-00C04fB984F9},CN=Policies,CN=System,DC=m >>> yd omain,DC=com. The file must be present at the location >>> <\\mydomain.com\sysvol\mydomain.com\Policies\{6AC1786C-016F-11D2-945 >>> F- 00C04fB984F9}\gpt.ini>. (The network path was not found. ). Group >>> Policy processing aborted. >>> >>> For more information, see Help and Support Center at >>> http://go.microsoft.com/fwlink/events.asp. >>> >>> Group policies are being applied. The link revealed nothing to me. >>> Any suggestions would be greatly appreciated >>>
Guest Dale Posted October 27, 2008 Posted October 27, 2008 Re: Error 1058 Userenv That could be quite lengthy if you're wanting the good as well as the bad. Is there anything in particular that you are looking for? Is there a way to pull out all of the events to notepad or something for easy posting? "Meinolf Weber" wrote: > Hello Dale, > > Please post the complete event viewer entries. Is this the only DC/DNS in > your domain? > > Best regards > > Meinolf Weber > Disclaimer: This posting is provided "AS IS" with no warranties, and confers > no rights. > ** Please do NOT email, only reply to Newsgroups > ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm > > > > Meinolf, > > > > Thanks for the quick reply. > > It is a DC and also DNS server. Running Server 2003 SP1 with all > > patches > > applied except SP2. > > There are 2 other errors that occur at the same time during the reboot > > process. This one before it: > > > > Windows cannot determine the user or computer name. (The system > > detected a possible attempt to compromise security. Please ensure > > that you can contact the server that authenticated you. ). Group > > Policy processing aborted. > > > > And this one after it: > > > > Windows cannot query for the list of Group Policy objects. Check the > > event log for possible messages previously logged by the policy engine > > that describes the reason for this. > > > > For more information, see Help and Support Center at > > http://go.microsoft.com/fwlink/events.asp. > > > > "Meinolf Weber" wrote: > > > >> Hello Dale, > >> > >> Is it a workstation or domain controller and what OS are you using. > >> If DC, is it also DNS server? Do you have any other event viewer > >> errors? > >> > >> Best regards > >> > >> Meinolf Weber > >> Disclaimer: This posting is provided "AS IS" with no warranties, and > >> confers > >> no rights. > >> ** Please do NOT email, only reply to Newsgroups > >> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm > >>> I get this error only after a weekly reboot. Is there a process not > >>> loading up before hand? should I be concerned about this? Is it > >>> updating at other times during the week? > >>> > >>> Windows cannot access the file gpt.ini for GPO > >>> CN={6AC1786C-016F-11D2-945F-00C04fB984F9},CN=Policies,CN=System,DC=m > >>> yd omain,DC=com. The file must be present at the location > >>> <\\mydomain.com\sysvol\mydomain.com\Policies\{6AC1786C-016F-11D2-945 > >>> F- 00C04fB984F9}\gpt.ini>. (The network path was not found. ). Group > >>> Policy processing aborted. > >>> > >>> For more information, see Help and Support Center at > >>> http://go.microsoft.com/fwlink/events.asp. > >>> > >>> Group policies are being applied. The link revealed nothing to me. > >>> Any suggestions would be greatly appreciated > >>> > > >
Guest Meinolf Weber Posted October 27, 2008 Posted October 27, 2008 Re: Error 1058 Userenv Hello Dale, Ofcourse i am talking about the both error ones where wrote about the posting before. If you click the 2 paper button int he right down corner of the event you can directly paste it into the posting. Please give some infos about other DC's like asked before. Best regards Meinolf Weber Disclaimer: This posting is provided "AS IS" with no warranties, and confers no rights. ** Please do NOT email, only reply to Newsgroups ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm > That could be quite lengthy if you're wanting the good as well as the > bad. Is > there anything in particular that you are looking for? > Is there a way to pull out all of the events to notepad or something > for > easy posting? > "Meinolf Weber" wrote: > >> Hello Dale, >> >> Please post the complete event viewer entries. Is this the only >> DC/DNS in your domain? >> >> Best regards >> >> Meinolf Weber >> Disclaimer: This posting is provided "AS IS" with no warranties, and >> confers >> no rights. >> ** Please do NOT email, only reply to Newsgroups >> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm >>> Meinolf, >>> >>> Thanks for the quick reply. >>> It is a DC and also DNS server. Running Server 2003 SP1 with all >>> patches >>> applied except SP2. >>> There are 2 other errors that occur at the same time during the >>> reboot >>> process. This one before it: >>> Windows cannot determine the user or computer name. (The system >>> detected a possible attempt to compromise security. Please ensure >>> that you can contact the server that authenticated you. ). Group >>> Policy processing aborted. >>> >>> And this one after it: >>> >>> Windows cannot query for the list of Group Policy objects. Check the >>> event log for possible messages previously logged by the policy >>> engine that describes the reason for this. >>> >>> For more information, see Help and Support Center at >>> http://go.microsoft.com/fwlink/events.asp. >>> >>> "Meinolf Weber" wrote: >>> >>>> Hello Dale, >>>> >>>> Is it a workstation or domain controller and what OS are you using. >>>> If DC, is it also DNS server? Do you have any other event viewer >>>> errors? >>>> >>>> Best regards >>>> >>>> Meinolf Weber >>>> Disclaimer: This posting is provided "AS IS" with no warranties, >>>> and >>>> confers >>>> no rights. >>>> ** Please do NOT email, only reply to Newsgroups >>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm >>>>> I get this error only after a weekly reboot. Is there a process >>>>> not loading up before hand? should I be concerned about this? Is >>>>> it updating at other times during the week? >>>>> >>>>> Windows cannot access the file gpt.ini for GPO >>>>> CN={6AC1786C-016F-11D2-945F-00C04fB984F9},CN=Policies,CN=System,DC >>>>> =m yd omain,DC=com. The file must be present at the location >>>>> <\\mydomain.com\sysvol\mydomain.com\Policies\{6AC1786C-016F-11D2-9 >>>>> 45 F- 00C04fB984F9}\gpt.ini>. (The network path was not found. ). >>>>> Group Policy processing aborted. >>>>> >>>>> For more information, see Help and Support Center at >>>>> http://go.microsoft.com/fwlink/events.asp. >>>>> >>>>> Group policies are being applied. The link revealed nothing to me. >>>>> Any suggestions would be greatly appreciated >>>>>
Guest Dale Posted October 27, 2008 Posted October 27, 2008 Re: Error 1058 Userenv Oh, ok well I can make this very easy, those are the only 3 errors I get, and they only happen at reboot that happens automatically once a week. This happens to be the PDC Emulator. the other DCs in the domain are the same service pack and patch level as this one, they are all also DNS servers and none of them get this error, just this one. Thanks Dale "Meinolf Weber" wrote: > Hello Dale, > > Ofcourse i am talking about the both error ones where wrote about the posting > before. If you click the 2 paper button int he right down corner of the event > you can directly paste it into the posting. > > Please give some infos about other DC's like asked before. > > Best regards > > Meinolf Weber > Disclaimer: This posting is provided "AS IS" with no warranties, and confers > no rights. > ** Please do NOT email, only reply to Newsgroups > ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm > > > > That could be quite lengthy if you're wanting the good as well as the > > bad. Is > > there anything in particular that you are looking for? > > Is there a way to pull out all of the events to notepad or something > > for > > easy posting? > > "Meinolf Weber" wrote: > > > >> Hello Dale, > >> > >> Please post the complete event viewer entries. Is this the only > >> DC/DNS in your domain? > >> > >> Best regards > >> > >> Meinolf Weber > >> Disclaimer: This posting is provided "AS IS" with no warranties, and > >> confers > >> no rights. > >> ** Please do NOT email, only reply to Newsgroups > >> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm > >>> Meinolf, > >>> > >>> Thanks for the quick reply. > >>> It is a DC and also DNS server. Running Server 2003 SP1 with all > >>> patches > >>> applied except SP2. > >>> There are 2 other errors that occur at the same time during the > >>> reboot > >>> process. This one before it: > >>> Windows cannot determine the user or computer name. (The system > >>> detected a possible attempt to compromise security. Please ensure > >>> that you can contact the server that authenticated you. ). Group > >>> Policy processing aborted. > >>> > >>> And this one after it: > >>> > >>> Windows cannot query for the list of Group Policy objects. Check the > >>> event log for possible messages previously logged by the policy > >>> engine that describes the reason for this. > >>> > >>> For more information, see Help and Support Center at > >>> http://go.microsoft.com/fwlink/events.asp. > >>> > >>> "Meinolf Weber" wrote: > >>> > >>>> Hello Dale, > >>>> > >>>> Is it a workstation or domain controller and what OS are you using. > >>>> If DC, is it also DNS server? Do you have any other event viewer > >>>> errors? > >>>> > >>>> Best regards > >>>> > >>>> Meinolf Weber > >>>> Disclaimer: This posting is provided "AS IS" with no warranties, > >>>> and > >>>> confers > >>>> no rights. > >>>> ** Please do NOT email, only reply to Newsgroups > >>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm > >>>>> I get this error only after a weekly reboot. Is there a process > >>>>> not loading up before hand? should I be concerned about this? Is > >>>>> it updating at other times during the week? > >>>>> > >>>>> Windows cannot access the file gpt.ini for GPO > >>>>> CN={6AC1786C-016F-11D2-945F-00C04fB984F9},CN=Policies,CN=System,DC > >>>>> =m yd omain,DC=com. The file must be present at the location > >>>>> <\\mydomain.com\sysvol\mydomain.com\Policies\{6AC1786C-016F-11D2-9 > >>>>> 45 F- 00C04fB984F9}\gpt.ini>. (The network path was not found. ). > >>>>> Group Policy processing aborted. > >>>>> > >>>>> For more information, see Help and Support Center at > >>>>> http://go.microsoft.com/fwlink/events.asp. > >>>>> > >>>>> Group policies are being applied. The link revealed nothing to me. > >>>>> Any suggestions would be greatly appreciated > >>>>> > > >
Guest Meinolf Weber Posted October 27, 2008 Posted October 27, 2008 Re: Error 1058 Userenv Hello Dale, Can you open and access the sysvol and netlogon share on the DC? Also you should run diagnostics against the DC. See here how to: From another posting. If you don't have the support tools installed, install them from your server install disk. d:\support\tools\setup.exe Run dcdiag, netdiag and repadmin in verbose mode. -> DCDIAG /V /C /D /E /s:yourdcname > c:\dcdiag.log -> netdiag.exe /v > c:\netdiag.log (On each dc) -> repadmin.exe /showrepl dc* /verbose /all /intersite > c:\repl.txt -> dnslint /ad /s "ip address of your dc" **Note: Using the /E switch in dcdiag will run diagnostics against ALL dc's in the forest. If you have significant numbers of DC's this test could generate significant detail and take a long time. You also want to take into account slow links to dc's will also add to the testing time. If you download a gui script I wrote it should be simple to set and run (DCDiag and NetDiag). It also has the option to run individual tests without having to learn all the switch options. The details will be output in notepad text files that pop up automagically. The script is located on my website at http://www.pbbergs.com/windows/downloads.htm Just select both dcdiag and netdiag make sure verbose is set. (Leave the default settings for dcdiag as set when selected) When complete search for fail, error and warning messages. Description and download for dnslint http://support.microsoft.com/kb/321045 -- Paul Bergson MVP - Directory Services MCT, MCSE, MCSA, Security+, BS CSci 2008, 2003, 2000 (Early Achiever), NT4 http://www.pbbergs.com Please no e-mails, any questions should be posted in the NewsGroup This posting is provided "AS IS" with no warranties, and confers no rights. Best regards Meinolf Weber Disclaimer: This posting is provided "AS IS" with no warranties, and confers no rights. ** Please do NOT email, only reply to Newsgroups ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm > Oh, ok well I can make this very easy, those are the only 3 errors I > get, and > they only happen at reboot that happens automatically once a week. > This happens to be the PDC Emulator. the other DCs in the domain are > the > same service pack and patch level as this one, they are all also DNS > servers > and none of them get this error, just this one. > Thanks > Dale > "Meinolf Weber" wrote: > >> Hello Dale, >> >> Ofcourse i am talking about the both error ones where wrote about the >> posting before. If you click the 2 paper button int he right down >> corner of the event you can directly paste it into the posting. >> >> Please give some infos about other DC's like asked before. >> >> Best regards >> >> Meinolf Weber >> Disclaimer: This posting is provided "AS IS" with no warranties, and >> confers >> no rights. >> ** Please do NOT email, only reply to Newsgroups >> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm >>> That could be quite lengthy if you're wanting the good as well as >>> the >>> bad. Is >>> there anything in particular that you are looking for? >>> Is there a way to pull out all of the events to notepad or something >>> for >>> easy posting? >>> "Meinolf Weber" wrote: >>>> Hello Dale, >>>> >>>> Please post the complete event viewer entries. Is this the only >>>> DC/DNS in your domain? >>>> >>>> Best regards >>>> >>>> Meinolf Weber >>>> Disclaimer: This posting is provided "AS IS" with no warranties, >>>> and >>>> confers >>>> no rights. >>>> ** Please do NOT email, only reply to Newsgroups >>>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm >>>>> Meinolf, >>>>> >>>>> Thanks for the quick reply. >>>>> It is a DC and also DNS server. Running Server 2003 SP1 with all >>>>> patches >>>>> applied except SP2. >>>>> There are 2 other errors that occur at the same time during the >>>>> reboot >>>>> process. This one before it: >>>>> Windows cannot determine the user or computer name. (The system >>>>> detected a possible attempt to compromise security. Please ensure >>>>> that you can contact the server that authenticated you. ). Group >>>>> Policy processing aborted. >>>>> And this one after it: >>>>> >>>>> Windows cannot query for the list of Group Policy objects. Check >>>>> the event log for possible messages previously logged by the >>>>> policy engine that describes the reason for this. >>>>> >>>>> For more information, see Help and Support Center at >>>>> http://go.microsoft.com/fwlink/events.asp. >>>>> >>>>> "Meinolf Weber" wrote: >>>>> >>>>>> Hello Dale, >>>>>> >>>>>> Is it a workstation or domain controller and what OS are you >>>>>> using. If DC, is it also DNS server? Do you have any other event >>>>>> viewer errors? >>>>>> >>>>>> Best regards >>>>>> >>>>>> Meinolf Weber >>>>>> Disclaimer: This posting is provided "AS IS" with no warranties, >>>>>> and >>>>>> confers >>>>>> no rights. >>>>>> ** Please do NOT email, only reply to Newsgroups >>>>>> ** HELP us help YOU!!! >>>>>> http://www.blakjak.demon.co.uk/mul_crss.htm >>>>>>> I get this error only after a weekly reboot. Is there a process >>>>>>> not loading up before hand? should I be concerned about this? Is >>>>>>> it updating at other times during the week? >>>>>>> >>>>>>> Windows cannot access the file gpt.ini for GPO >>>>>>> CN={6AC1786C-016F-11D2-945F-00C04fB984F9},CN=Policies,CN=System, >>>>>>> DC =m yd omain,DC=com. The file must be present at the location >>>>>>> <\\mydomain.com\sysvol\mydomain.com\Policies\{6AC1786C-016F-11D2 >>>>>>> -9 45 F- 00C04fB984F9}\gpt.ini>. (The network path was not >>>>>>> found. ). Group Policy processing aborted. >>>>>>> >>>>>>> For more information, see Help and Support Center at >>>>>>> http://go.microsoft.com/fwlink/events.asp. >>>>>>> >>>>>>> Group policies are being applied. The link revealed nothing to >>>>>>> me. Any suggestions would be greatly appreciated >>>>>>>
Recommended Posts