KenB Posted November 7, 2012 Posted November 7, 2012 is it quite easy to remove the old one and build in the new one? What I would do is to sketch or take photos of all the connections that you have and are going to take off. Then the PSU is held on with 4 small screws at the back. The Molex connections are sometimes a bit stiff to remove but with a bit of persuasion they will come out. take a look here it should help click here The video suggests an anti-static wrist strap. You will not need this. Switch off at the wall but leave the plug in. This maintains the earth connection. Before you start touch the bare metal of the case. This will discharge any static in you. If the old PSU has an on/off switch - then switch this off. Quote There is an email going around offering processed pork - gelatin - and salt in a can ......this is simply SPAM !! MiniToolBoxNetwork TestWireless Test
KenB Posted November 7, 2012 Posted November 7, 2012 if it is a 4 pin shall I go ahead and order it? As far as I can tell - it will be a direct replacement for your old one. The connections cannot be put in the wrong place or the wrong way around. They are designed this way. It looks really complicated due to all of the wires BUT it isn't. Take photos to remind you. Replace the PSU first - do not put the new Video Card in until you have tested the PSU and make sure that that is working OK. If you like you can come back here once the PSU has arrived and ask any further questions you have before you start :) Quote There is an email going around offering processed pork - gelatin - and salt in a can ......this is simply SPAM !! MiniToolBoxNetwork TestWireless Test
Stellaann Posted November 7, 2012 Author Posted November 7, 2012 Alright, It sounds pretty straight forward.Ha ha I remember to touch the metal case first, I haven't lost all my knowledge there is still hope for me lol I will get back to you tomorrow and again thanks for all your help.:) Quote
KenB Posted November 7, 2012 Posted November 7, 2012 No problem :) Quote There is an email going around offering processed pork - gelatin - and salt in a can ......this is simply SPAM !! MiniToolBoxNetwork TestWireless Test
Helcaraxe Posted November 7, 2012 Posted November 7, 2012 Sorry to jump in on your thread. I just wanted to confirm for you that the HD6670 does not need any power leads as it takes all it current through the PCIE slot. I have to same card in my PC as was confused at first by the little booklet supplied with the graphics card showing the power connections but i think the booklet is a generic one supplied with the entire HD range as i have had the same booklet with two different HD graphics cards. BTW you won't be disappointed its a good budget graphics card just make sure you get the latest drivers from the website rather than the ones supplied on the disc provided. Quote AMD FX 8350 @4.7gh/ Asus M5A99X EVO R2.0/ 8gb Samsung Green DDR3@2133mhz @2133mhz/ASUS HD 7850 2gb 1150/5400/ OCZ 126GB SSD/ Western Digital 500gb HDD/ OCZ Mod X Stream Pro 600w PSU/ Antec Kuhler H20 920/ Antec 900 V2
KenB Posted November 7, 2012 Posted November 7, 2012 I just wanted to confirm for you that the HD6670 does not need any power leads Thanks for confirming that helcaraxe I wanted to be absolutely sure before suggesting a PSU upgrade. Quote There is an email going around offering processed pork - gelatin - and salt in a can ......this is simply SPAM !! MiniToolBoxNetwork TestWireless Test
Stellaann Posted November 8, 2012 Author Posted November 8, 2012 Thank you Helcaraxe, I will indeed get the latest drivers. Ken It was a 4 pin so I will go ahead and order what you advised. I will let you know how I get on :) Quote
KenB Posted November 8, 2012 Posted November 8, 2012 I look forward to hearing that you have a new 500 Watt PSU installed :) I found this too I suspect that you have on-board video ( no actual card ) already ....but it should help. Remember DO NOT put your new Video Card in until you have run the system with the new PSU. Once installed you may need to disable the old drivers. I can advise on that later :) Quote There is an email going around offering processed pork - gelatin - and salt in a can ......this is simply SPAM !! MiniToolBoxNetwork TestWireless Test
Stellaann Posted November 8, 2012 Author Posted November 8, 2012 Thank you for the video, Don't worry I will first make sure the new PSU is working fine. I don't want to damage the new graphic card. The PSU should arrive tomorrow and aye i'm looking forward to getting it all in working order too for that game ;) speak tomorrow. Quote
Stellaann Posted November 9, 2012 Author Posted November 9, 2012 Ok first problem , That long flat plug does not fit, the old one is a 24 pin but the new one is smaller. what now??[ATTACH=CONFIG]1722[/ATTACH]The new plug is 20 pin :confused: Quote
Stellaann Posted November 9, 2012 Author Posted November 9, 2012 ahh I solved it, there was a extra 4 pin plug you can attach, phew lol Quote
Stellaann Posted November 9, 2012 Author Posted November 9, 2012 Everything is installed and built in!!! Very easy to do thank goodness :) I have just downloaded the latest driver from the website. Everything is working fab. I'm going to see how my sims game works with the new card now, i'm like a wee kid with a new toy. So happy it's all gone well without any setbacks. When my son is in bed I will see if Amnisia will install now. Ken a very huge thank you for your support and patience. I will be back if I ever have another question and will also recommend this site...WHOOHOO:cheer2: Quote
KenB Posted November 9, 2012 Posted November 9, 2012 Everything is working fab. Well done - it does give you a buzz when things go right :) I will see if Amnisia will install now. Let us know if the game runs - after all ......that was the reason for starting all of this :) Quote There is an email going around offering processed pork - gelatin - and salt in a can ......this is simply SPAM !! MiniToolBoxNetwork TestWireless Test
Stellaann Posted November 11, 2012 Author Posted November 11, 2012 Hiya Ken, Good umm FANTASTIC news, the game installed without any problems. Thanks so much I will have one mega happy son this Christmas. Quote
KenB Posted November 11, 2012 Posted November 11, 2012 FANTASTIC news, the game installed without any problems [ATTACH=CONFIG]1724[/ATTACH][ATTACH=CONFIG]1725[/ATTACH][ATTACH=CONFIG]1726[/ATTACH] I will have one mega happy son this Christmas. Hi Stella - he deserves it :) I hope you get off and let him have a go now and again. Best of luck and, although early I am sure you will have a [ATTACH=CONFIG]1727[/ATTACH] Quote There is an email going around offering processed pork - gelatin - and salt in a can ......this is simply SPAM !! MiniToolBoxNetwork TestWireless Test
Stellaann Posted March 7, 2013 Author Posted March 7, 2013 Hiya Ken, sorry about very late reply but I wanted you to know that my son was super pleased with the game he got at Xmas. Thanks to you I could make it happen. Quote
KenB Posted March 7, 2013 Posted March 7, 2013 Hi Stellaann It is nice to get feedback like this. I am glad that your son is enjoying the game - tell him "Hi" from me :) Quote There is an email going around offering processed pork - gelatin - and salt in a can ......this is simply SPAM !! MiniToolBoxNetwork TestWireless Test
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.