konrad Posted February 28, 2013 Posted February 28, 2013 Hi, Don't know if this is the correct place to ask my question but it seems the most logical looking at the options available. I have been writing and receiving feedback on an issue relating to an Acer monitor that I am trying to repair. The few components I have managed to test with my multi meter have all checked out OK but for one resistor on the power pcb. This particular resistor has a value of just 0.24 ohms according to the colour coding on it. It is reading 0.7 ohms. As the resistor has a tolerance of just 5% plus or minus I would judge that it is faulty and needs replacing. This is where I need your help. Trying to source a resistor with this value is proving almost impossible. I have found them for sale but in bulk orders only (50+). Does anybody know where I can get hold of a 0.24 ohm resistor (just one)? regards, Konrad :confused: Quote
Vr5fx Posted February 28, 2013 Posted February 28, 2013 Try here. http://uk.farnell.com/vishay-bc-components/ac03000002407jac00/resistor-0-24r-3w-5-wirewound/dp/1838956?Ntt=0.24+ohm+resistor Not sure if this is what your looking for. -Vr Quote AMD FX 6100 @ 3.9Ghz / Asus M5A99X EVO 990X / G-Skill 8GB DDR3 1600Mhz RipjawsX / Zotac GeForce GTX 660 Ti / Corsair TX 750W V2 PSU / Antec Kuhler 620 / Win7 64 / NZXT Tempest 410 Elite / NZXT 6 channel fan controller / Kingston 240GB HyperX 3K SSD / 1TB HDD Intel Pentium G2020 2.90GHz / Gigabyte GA-Z77N-WIFI / Kingston 4GB DDR3 1600MHz HyperX Genesis / Corsair 430W CXM / Fractal Design Node 304 Mini ITX Case / 2TB WD Greenhttp://steamsignature.com/status/default/76561197986113115.png
Synapse Posted February 28, 2013 Posted February 28, 2013 I'd check the accuracy of the measurement range before splashing out. I've just looked at a Fluke meter as an example, 0 - 600 ohm minimum range, accuracy 5%, which is often 5% of range. That would be 30 ohms, and so wouldn't be able to accurately measure your 0.24 ohms. Quote
Plastic Nev Posted February 28, 2013 Posted February 28, 2013 I agree with Synapse here, as well as the possibility of meter errors at such a low value, I actually am questioning the value shown any way, a photo of the resistor would be nice, but the colours on it will do, I must also ask, are you testing this resistor with at least one end un-soldered from the circuit board? and also in both directions, I have seen diodes with coloured bands on them. If a diode it will conduct one way, but not the other. I work with electronics on machine control circuitry, and as a licensed radio amateur, I have built audio amplifiers and radio transceivers, as well as repaired them, and never yet come across a resistor of such a low value, hence why I think you may have something wrong. However, if in fact this is the correct value at 0.24 ohms, a length of wire, say a foot of thin wire from a redundant bit of telephone wire, soldered in in place of that resistor, then try the circuit. 0.24 ohms is such a small value it is near to a full circuit any way, so a length of thin wire will be near enough as good a replacement for test purposes. Nev. Quote Need help with your computer problems? Then why not join Free PC Help. Register here If Free PC Help has helped you then please consider a donation. Click here We are all members helping other members.Please return here where you may be able to help someone else. After all, no one knows everything and you may have the answer that someone needs. --------------------------------------------------------------------I have installed Windows, now how do I install the curtains? :Dhttp://i7.photobucket.com/albums/y282/plasticpig/Nev2.gif
konrad Posted February 28, 2013 Author Posted February 28, 2013 Thanks for your input. The resistor has been removed completely from the pcb and the colours are red/yellow/silver/gold. The silver is just that as it shines whereas grey is a matt colour. Grey would give a reading of mega ohms. I have tried to photograph the resistor but the macro is struggling to pick up the focus and colour. I did test it in both directions although this should not make any difference to a resistor and this is undoubtedly a resistor. The only possible explanation is that the silver turns out to be grey but I have seen grey on other risistors and it looks nothing like the silver colour on this resistor. The meter is what it is and I don't have the resource to guage its accuracy so I have to believe what it is telling me. regards, Konrad Quote
KenB Posted February 28, 2013 Posted February 28, 2013 How about this? click here USA - sorry but they must be available. Quote There is an email going around offering processed pork - gelatin - and salt in a can ......this is simply SPAM !! MiniToolBoxNetwork TestWireless Test
Plastic Nev Posted March 1, 2013 Posted March 1, 2013 Hum, I am surprised, as the colours are correct. Without knowing the circuit, and doubt there is any circuit diagram available, I do wonder at its purpose except as some sort of current limiting resistor. As I said, that low a resistance is nearly a short circuit anyway so if your meter is showing it to be still below 1 ohm at 0.7 which granted is nearly three times higher, I doubt that this resistor is the reason for the full circuit failure. Maybe get a dimmer monitor screen because of it, but not full failure. However if you can obtain a replacement cheaply enough, then go for it, it won't cause harm replacing it, though do be ready for disappointment if the monitor still doesn't work. Nev. Quote Need help with your computer problems? Then why not join Free PC Help. Register here If Free PC Help has helped you then please consider a donation. Click here We are all members helping other members.Please return here where you may be able to help someone else. After all, no one knows everything and you may have the answer that someone needs. --------------------------------------------------------------------I have installed Windows, now how do I install the curtains? :Dhttp://i7.photobucket.com/albums/y282/plasticpig/Nev2.gif
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.