Guest Paul33 Posted July 4, 2007 Posted July 4, 2007 XP Pro, SP2 I have 4GB RAM. XP says not. I have read the Service Note that says why, but that doesn't help much. I want to assign 2GB to Photoshop, however, PS says that there is less than 2 available and suggest assigning no more than 1.232 Should I simply ignore this and assign 2 to PS? If not, how do I fix this?
Guest Shenan Stanley Posted July 4, 2007 Posted July 4, 2007 Re: Usable RAM Paul33 wrote: > XP Pro, SP2 > > I have 4GB RAM. XP says not. I have read the Service Note that says > why, but that doesn't help much. I want to assign 2GB to Photoshop, > however, PS says that there is less than 2 available and suggest > assigning no more than 1.232 Should I simply ignore this and assign > 2 to PS? If not, how do I fix this? Have you looked into the /3GB switch for BOOT.INI? How about using Windows XP x64? Windows Vista 64 bit? -- Shenan Stanley MS-MVP -- How To Ask Questions The Smart Way http://www.catb.org/~esr/faqs/smart-questions.html
Guest Jim Posted July 4, 2007 Posted July 4, 2007 Re: Usable RAM "Paul33" <Paul33@discussions.microsoft.com> wrote in message news:D4D262FB-DB17-49EA-8720-430D9C52F8BE@microsoft.com... > XP Pro, SP2 > > I have 4GB RAM. XP says not. I have read the Service Note that says why, > but > that doesn't help much. I want to assign 2GB to Photoshop, however, PS > says > that there is less than 2 available and suggest assigning no more than > 1.232 > Should I simply ignore this and assign 2 to PS? If not, how do I fix this? XP is reporting that portion of your 4 GB RAM which it can use. The rest gets taken by such items as shared memory on the graphics card and perhaps non paged pool. Of course, you can assign whatever you want, but PS will still complain and refuse to start. Jim
Guest Jerry Posted July 4, 2007 Posted July 4, 2007 Re: Usable RAM Try editing BOOT.INI to add /3GB and /PAE A Google search on BOOT.INI will provide info on these switches and others. When you go to 4Gb of memeory Windows reports about 3.25Gb - the rest is used/taken as memory space for hardware and other stuff. "Paul33" <Paul33@discussions.microsoft.com> wrote in message news:D4D262FB-DB17-49EA-8720-430D9C52F8BE@microsoft.com... > XP Pro, SP2 > > I have 4GB RAM. XP says not. I have read the Service Note that says why, > but > that doesn't help much. I want to assign 2GB to Photoshop, however, PS > says > that there is less than 2 available and suggest assigning no more than > 1.232 > Should I simply ignore this and assign 2 to PS? If not, how do I fix this?
Guest Patrick Keenan Posted July 4, 2007 Posted July 4, 2007 Re: Usable RAM "Paul33" <Paul33@discussions.microsoft.com> wrote in message news:D4D262FB-DB17-49EA-8720-430D9C52F8BE@microsoft.com... > XP Pro, SP2 > > I have 4GB RAM. XP says not. What does XP actually say, and perhaps more importantly, what does the BIOS say? -pk > I have read the Service Note that says why, but > that doesn't help much. I want to assign 2GB to Photoshop, however, PS > says > that there is less than 2 available and suggest assigning no more than > 1.232 > Should I simply ignore this and assign 2 to PS? If not, how do I fix this?
Guest Paul33 Posted July 4, 2007 Posted July 4, 2007 Re: Usable RAM System information (General tab) gives 3.12 GB of RAM. Why? Is this the 3GB switch? Photoshop says that the available RAM is 1.711GB. What happened to the other 1.4? Surely many thousands of others (non-Mac users) have had this same question; is there a simple instruction to permit XP-Photoshop to use the actually available RAM? I read the switch article, as did my computer builder, and it seems to apply only to servers. Paul "Jim" wrote: > > "Paul33" <Paul33@discussions.microsoft.com> wrote in message > news:D4D262FB-DB17-49EA-8720-430D9C52F8BE@microsoft.com... > > XP Pro, SP2 > > > > I have 4GB RAM. XP says not. I have read the Service Note that says why, > > but > > that doesn't help much. I want to assign 2GB to Photoshop, however, PS > > says > > that there is less than 2 available and suggest assigning no more than > > 1.232 > > Should I simply ignore this and assign 2 to PS? If not, how do I fix this? > > XP is reporting that portion of your 4 GB RAM which it can use. The rest > gets taken by such items as shared memory on the graphics card and perhaps > non paged pool. > > Of course, you can assign whatever you want, but PS will still complain and > refuse to start. > > Jim > > >
Guest Jim Posted July 4, 2007 Posted July 4, 2007 Re: Usable RAM "Paul33" <Paul33@discussions.microsoft.com> wrote in message news:D84A0026-09F9-4784-9A01-EB5C88478120@microsoft.com... > System information (General tab) gives 3.12 GB of RAM. Why? Is this the > 3GB > switch? Photoshop says that the available RAM is 1.711GB. What happened to > the other 1.4? > Surely many thousands of others (non-Mac users) have had this same > question; > is there a simple instruction to permit XP-Photoshop to use the actually > available RAM? > I read the switch article, as did my computer builder, and it seems to > apply > only to servers. > > Paul No, it is not the /3GB switch. This switch applies to the allowable user virtual memory space. The missing RAM can be consumed by shared memory in the graphics card. No, you will never get to use the full 4gb virtual memory because the operating system must be mapped into the virtual address space. This statement applies to all virtual memory operating systems. The reason that PS is reporting that value is that you do not have the /3gb switch added. In this instance, the user virtual memory space is 2gb , but some of this value is consumed by necessary data structures. As for the switch article, you both misinterpreted it. The server systems include the PAE facility which must be enabled by the motherboard. I don't believe that any of the PC systems have such a motherboard. In addition, using the 3GB switch will have no effect unless the application supports such a change to the operation of the program. Jim > > "Jim" wrote: > >> >> "Paul33" <Paul33@discussions.microsoft.com> wrote in message >> news:D4D262FB-DB17-49EA-8720-430D9C52F8BE@microsoft.com... >> > XP Pro, SP2 >> > >> > I have 4GB RAM. XP says not. I have read the Service Note that says >> > why, >> > but >> > that doesn't help much. I want to assign 2GB to Photoshop, however, PS >> > says >> > that there is less than 2 available and suggest assigning no more than >> > 1.232 >> > Should I simply ignore this and assign 2 to PS? If not, how do I fix >> > this? >> >> XP is reporting that portion of your 4 GB RAM which it can use. The rest >> gets taken by such items as shared memory on the graphics card and >> perhaps >> non paged pool. >> >> Of course, you can assign whatever you want, but PS will still complain >> and >> refuse to start. >> >> Jim >> >> >>
Guest Paul33 Posted July 5, 2007 Posted July 5, 2007 Re: Usable RAM Thanks all. Unfortunately I remain, perhaps as always, confused. I thought that "virtual memory" was a specified chunk (virtual paging file?) of your "c" drive that windows uses as if it were RAM; but that installed RAM wasn't "virtual." Photoshop literature says it can use 2GB of RAM (32 bit) and will run most efficiently with that much RAM assigned. XP literature says it can use (address?) 4GB. My last computer ran XP and PS on 1GB. Is there software available that will help one assign the installed RAM (no more than 4GB) as "you" want, rather than it being assigned by some non-transparent internal operation that hardly seems efficient? Is there an article on changing the boot.ini file with any pros and cons? Paul "Jim" wrote: > > "Paul33" <Paul33@discussions.microsoft.com> wrote in message > news:D84A0026-09F9-4784-9A01-EB5C88478120@microsoft.com... > > System information (General tab) gives 3.12 GB of RAM. Why? Is this the > > 3GB > > switch? Photoshop says that the available RAM is 1.711GB. What happened to > > the other 1.4? > > Surely many thousands of others (non-Mac users) have had this same > > question; > > is there a simple instruction to permit XP-Photoshop to use the actually > > available RAM? > > I read the switch article, as did my computer builder, and it seems to > > apply > > only to servers. > > > > Paul > No, it is not the /3GB switch. This switch applies to the allowable user > virtual memory space. > The missing RAM can be consumed by shared memory in the graphics card. > > No, you will never get to use the full 4gb virtual memory because the > operating system must > be mapped into the virtual address space. This statement applies to all > virtual memory operating > systems. > > The reason that PS is reporting that value is that you do not have the /3gb > switch added. In this instance, > the user virtual memory space is 2gb , but some of this value is consumed by > necessary data structures. > > As for the switch article, you both misinterpreted it. The server systems > include the PAE facility which > must be enabled by the motherboard. I don't believe that any of the PC > systems have such a motherboard. > > In addition, using the 3GB switch will have no effect unless the application > supports such a change to the > operation of the program. > > Jim > > > > "Jim" wrote: > > > >> > >> "Paul33" <Paul33@discussions.microsoft.com> wrote in message > >> news:D4D262FB-DB17-49EA-8720-430D9C52F8BE@microsoft.com... > >> > XP Pro, SP2 > >> > > >> > I have 4GB RAM. XP says not. I have read the Service Note that says > >> > why, > >> > but > >> > that doesn't help much. I want to assign 2GB to Photoshop, however, PS > >> > says > >> > that there is less than 2 available and suggest assigning no more than > >> > 1.232 > >> > Should I simply ignore this and assign 2 to PS? If not, how do I fix > >> > this? > >> > >> XP is reporting that portion of your 4 GB RAM which it can use. The rest > >> gets taken by such items as shared memory on the graphics card and > >> perhaps > >> non paged pool. > >> > >> Of course, you can assign whatever you want, but PS will still complain > >> and > >> refuse to start. > >> > >> Jim > >> > >> > >> > > >
Guest Shenan Stanley Posted July 5, 2007 Posted July 5, 2007 Re: Usable RAM Paul33 wrote: > XP Pro, SP2 > > I have 4GB RAM. XP says not. I have read the Service Note that says > why, but that doesn't help much. I want to assign 2GB to Photoshop, > however, PS says that there is less than 2 available and suggest > assigning no more than 1.232 Should I simply ignore this and assign > 2 to PS? If not, how do I fix this? Shenan Stanley wrote: > Have you looked into the /3GB switch for BOOT.INI? > How about using Windows XP x64? > Windows Vista 64 bit? Jim wrote: > XP is reporting that portion of your 4 GB RAM which it can use. > The rest gets taken by such items as shared memory on the graphics > card and perhaps non paged pool. > > Of course, you can assign whatever you want, but PS will still > complain and refuse to start. Paul33 wrote: > System information (General tab) gives 3.12 GB of RAM. Why? Is this > the 3GB switch? Photoshop says that the available RAM is 1.711GB. > What happened to the other 1.4? > > Surely many thousands of others (non-Mac users) have had this same > question; is there a simple instruction to permit XP-Photoshop to > use the actually available RAM? > > I read the switch article, as did my computer builder, and it seems > to apply only to servers. Jim wrote: > No, it is not the /3GB switch. This switch applies to the > allowable user virtual memory space. > The missing RAM can be consumed by shared memory in the graphics > card. > > No, you will never get to use the full 4gb virtual memory because > the operating system must > be mapped into the virtual address space. This statement applies > to all virtual memory operating > systems. > > The reason that PS is reporting that value is that you do not have > the /3gb switch added. In this instance, > the user virtual memory space is 2gb , but some of this value is > consumed by necessary data structures. > > As for the switch article, you both misinterpreted it. The server > systems include the PAE facility which > must be enabled by the motherboard. I don't believe that any of > the PC systems have such a motherboard. > > In addition, using the 3GB switch will have no effect unless the > application supports such a change to the > operation of the program. Paul33 wrote: > Thanks all. Unfortunately I remain, perhaps as always, confused. I > thought that "virtual memory" was a specified chunk (virtual paging > file?) of your "c" drive that windows uses as if it were RAM; but > that installed RAM wasn't "virtual." > > Photoshop literature says it can use 2GB of RAM (32 bit) and will > run most efficiently with that much RAM assigned. XP literature > says it can use (address?) 4GB. My last computer ran XP and PS on > 1GB. > > Is there software available that will help one assign the installed > RAM (no more than 4GB) as "you" want, rather than it being assigned > by some non-transparent internal operation that hardly seems > efficient? Is there an article on changing the boot.ini file with > any pros and cons? Virtual Memory is a chunk of your hard disk drive space that is used for paging operations or temporary 'fake' memory. It's performance is no better than the performance of the hard disk drive - which is MUCH slower than your actual memory. Virtual memory/Page File is NOT a substitute for actual RAM. The limitation of 4GB in Windows XP (non-64 bit) has more to do with the ability of a 32 bit systems ability to access that much RAM than anything else. It has been pointed out to you that you need to edit your BOOT.INI and add the /3GB switch in order to give more to the applications and less to the operating system (in laymans terms.) With that /3GB switch - perhaps Photoshop *will* utilize 2GB of RAM - but it will likely only pull that much in *when it needs it* - and not just reserve it for itself. At least - that would make more sense. You are better off adding the /3GB switch in BOOT.INI and trying it out and seeing if that makes any noticable performance difference in Photoshop than continuing to worry over this much more. (If there is software - it would be messing with native Windows Memory Management functions - and who knows what that would do to stability. Sure- maybe you could squeeze 2.5GB of your memory and assign it to photoshop - but would it be worth the machine randomly rebooting before you had a chance to save?) Your other option - make sure your version of Photoshop will run in Windows XP x64, make sure all your hardware has drivers from Windows XP x64 (and any other software you plan on using with it works in x64 as well) and install Windows XP x64. Then you could have 8GB+ of memory if you want and it will be better managed. As for your computer builder's kknowledge of computers - you may want to allow them to continue building your systems (hardware) - but get yourself someone else for software/operating system advice... *grin* Use these instructions to add the /3GB to your Windows XP boot.ini file: http://searchwincomputing.techtarget.com/tip/0,289483,sid68_gci1108831,00.html Some advice on the /3GB switch in the BOOT.INI: It will not *make* Windows XP show you that you have 4GB of physical memory - in fact - Windows XP 32-bit will *never* show you that you have 4GB of memory. It could even degrade performance of Windows XP itself - although, not usually as the 1GB is more than enough for the OS and its needs. It just forces the OS to allocate 3GB to the programs and only 1GB to the system. -- Shenan Stanley MS-MVP -- How To Ask Questions The Smart Way http://www.catb.org/~esr/faqs/smart-questions.html
Guest John John Posted July 5, 2007 Posted July 5, 2007 Re: Usable RAM Shenan Stanley wrote: > Paul33 wrote: > >>XP Pro, SP2 >> >>I have 4GB RAM. XP says not. I have read the Service Note that says >>why, but that doesn't help much. I want to assign 2GB to Photoshop, >>however, PS says that there is less than 2 available and suggest >>assigning no more than 1.232 Should I simply ignore this and assign >>2 to PS? If not, how do I fix this? > > > Shenan Stanley wrote: > >>Have you looked into the /3GB switch for BOOT.INI? >>How about using Windows XP x64? >>Windows Vista 64 bit? > > > Jim wrote: > >>XP is reporting that portion of your 4 GB RAM which it can use. >>The rest gets taken by such items as shared memory on the graphics >>card and perhaps non paged pool. >> >>Of course, you can assign whatever you want, but PS will still >>complain and refuse to start. > > > Paul33 wrote: > >>System information (General tab) gives 3.12 GB of RAM. Why? Is this >>the 3GB switch? Photoshop says that the available RAM is 1.711GB. >>What happened to the other 1.4? >> >>Surely many thousands of others (non-Mac users) have had this same >>question; is there a simple instruction to permit XP-Photoshop to >>use the actually available RAM? >> >>I read the switch article, as did my computer builder, and it seems >>to apply only to servers. > > > Jim wrote: > >>No, it is not the /3GB switch. This switch applies to the >>allowable user virtual memory space. >>The missing RAM can be consumed by shared memory in the graphics >>card. >> >>No, you will never get to use the full 4gb virtual memory because >>the operating system must >>be mapped into the virtual address space. This statement applies >>to all virtual memory operating >>systems. >> >>The reason that PS is reporting that value is that you do not have >>the /3gb switch added. In this instance, >>the user virtual memory space is 2gb , but some of this value is >>consumed by necessary data structures. >> >>As for the switch article, you both misinterpreted it. The server >>systems include the PAE facility which >>must be enabled by the motherboard. I don't believe that any of >>the PC systems have such a motherboard. >> >>In addition, using the 3GB switch will have no effect unless the >>application supports such a change to the >>operation of the program. > > > Paul33 wrote: > >>Thanks all. Unfortunately I remain, perhaps as always, confused. I >>thought that "virtual memory" was a specified chunk (virtual paging >>file?) of your "c" drive that windows uses as if it were RAM; but >>that installed RAM wasn't "virtual." >> >>Photoshop literature says it can use 2GB of RAM (32 bit) and will >>run most efficiently with that much RAM assigned. XP literature >>says it can use (address?) 4GB. My last computer ran XP and PS on >>1GB. >> >>Is there software available that will help one assign the installed >>RAM (no more than 4GB) as "you" want, rather than it being assigned >>by some non-transparent internal operation that hardly seems >>efficient? Is there an article on changing the boot.ini file with >>any pros and cons? > > > Virtual Memory is a chunk of your hard disk drive space that is used for > paging operations or temporary 'fake' memory. It's performance is no better > than the performance of the hard disk drive - which is MUCH slower than your > actual memory. Virtual memory/Page File is NOT a substitute for actual RAM. > > The limitation of 4GB in Windows XP (non-64 bit) has more to do with the > ability of a 32 bit systems ability to access that much RAM than anything > else. It has been pointed out to you that you need to edit your BOOT.INI > and add the /3GB switch in order to give more to the applications and less > to the operating system (in laymans terms.) > > With that /3GB switch - perhaps Photoshop *will* utilize 2GB of RAM - but it > will likely only pull that much in *when it needs it* - and not just reserve > it for itself. At least - that would make more sense. > > You are better off adding the /3GB switch in BOOT.INI and trying it out and > seeing if that makes any noticable performance difference in Photoshop than > continuing to worry over this much more. (If there is software - it would > be messing with native Windows Memory Management functions - and who knows > what that would do to stability. Sure- maybe you could squeeze 2.5GB of > your memory and assign it to photoshop - but would it be worth the machine > randomly rebooting before you had a chance to save?) > > Your other option - make sure your version of Photoshop will run in Windows > XP x64, make sure all your hardware has drivers from Windows XP x64 (and any > other software you plan on using with it works in x64 as well) and install > Windows XP x64. Then you could have 8GB+ of memory if you want and it will > be better managed. > > As for your computer builder's kknowledge of computers - you may want to > allow them to continue building your systems (hardware) - but get yourself > someone else for software/operating system advice... *grin* > > Use these instructions to add the /3GB to your Windows XP boot.ini file: > http://searchwincomputing.techtarget.com/tip/0,289483,sid68_gci1108831,00.html > > Some advice on the /3GB switch in the BOOT.INI: > It will not *make* Windows XP show you that you have 4GB of physical > memory - in fact - Windows XP 32-bit will *never* show you that you have 4GB > of memory. It could even degrade performance of Windows XP itself - > although, not usually as the 1GB is more than enough for the OS and its > needs. It just forces the OS to allocate 3GB to the programs and only 1GB > to the system. > Additionally, he may want to use the /userva switch with the /3GB switch: http://support.microsoft.com/kb/316739/EN-US/ http://support.microsoft.com/kb/319043 John
Guest Paul33 Posted July 5, 2007 Posted July 5, 2007 Re: Usable RAM Thank you Shehan Stanley. I believe I have it now, and thank you for the reference. And you're right, my builder should have known all this, particularly as I explained precisely why I wanted the 4 GB. Paul "Shenan Stanley" wrote: > Paul33 wrote: > > XP Pro, SP2 > > > > I have 4GB RAM. XP says not. I have read the Service Note that says > > why, but that doesn't help much. I want to assign 2GB to Photoshop, > > however, PS says that there is less than 2 available and suggest > > assigning no more than 1.232 Should I simply ignore this and assign > > 2 to PS? If not, how do I fix this? > > Shenan Stanley wrote: > > Have you looked into the /3GB switch for BOOT.INI? > > How about using Windows XP x64? > > Windows Vista 64 bit? > > Jim wrote: > > XP is reporting that portion of your 4 GB RAM which it can use. > > The rest gets taken by such items as shared memory on the graphics > > card and perhaps non paged pool. > > > > Of course, you can assign whatever you want, but PS will still > > complain and refuse to start. > > Paul33 wrote: > > System information (General tab) gives 3.12 GB of RAM. Why? Is this > > the 3GB switch? Photoshop says that the available RAM is 1.711GB. > > What happened to the other 1.4? > > > > Surely many thousands of others (non-Mac users) have had this same > > question; is there a simple instruction to permit XP-Photoshop to > > use the actually available RAM? > > > > I read the switch article, as did my computer builder, and it seems > > to apply only to servers. > > Jim wrote: > > No, it is not the /3GB switch. This switch applies to the > > allowable user virtual memory space. > > The missing RAM can be consumed by shared memory in the graphics > > card. > > > > No, you will never get to use the full 4gb virtual memory because > > the operating system must > > be mapped into the virtual address space. This statement applies > > to all virtual memory operating > > systems. > > > > The reason that PS is reporting that value is that you do not have > > the /3gb switch added. In this instance, > > the user virtual memory space is 2gb , but some of this value is > > consumed by necessary data structures. > > > > As for the switch article, you both misinterpreted it. The server > > systems include the PAE facility which > > must be enabled by the motherboard. I don't believe that any of > > the PC systems have such a motherboard. > > > > In addition, using the 3GB switch will have no effect unless the > > application supports such a change to the > > operation of the program. > > Paul33 wrote: > > Thanks all. Unfortunately I remain, perhaps as always, confused. I > > thought that "virtual memory" was a specified chunk (virtual paging > > file?) of your "c" drive that windows uses as if it were RAM; but > > that installed RAM wasn't "virtual." > > > > Photoshop literature says it can use 2GB of RAM (32 bit) and will > > run most efficiently with that much RAM assigned. XP literature > > says it can use (address?) 4GB. My last computer ran XP and PS on > > 1GB. > > > > Is there software available that will help one assign the installed > > RAM (no more than 4GB) as "you" want, rather than it being assigned > > by some non-transparent internal operation that hardly seems > > efficient? Is there an article on changing the boot.ini file with > > any pros and cons? > > Virtual Memory is a chunk of your hard disk drive space that is used for > paging operations or temporary 'fake' memory. It's performance is no better > than the performance of the hard disk drive - which is MUCH slower than your > actual memory. Virtual memory/Page File is NOT a substitute for actual RAM. > > The limitation of 4GB in Windows XP (non-64 bit) has more to do with the > ability of a 32 bit systems ability to access that much RAM than anything > else. It has been pointed out to you that you need to edit your BOOT.INI > and add the /3GB switch in order to give more to the applications and less > to the operating system (in laymans terms.) > > With that /3GB switch - perhaps Photoshop *will* utilize 2GB of RAM - but it > will likely only pull that much in *when it needs it* - and not just reserve > it for itself. At least - that would make more sense. > > You are better off adding the /3GB switch in BOOT.INI and trying it out and > seeing if that makes any noticable performance difference in Photoshop than > continuing to worry over this much more. (If there is software - it would > be messing with native Windows Memory Management functions - and who knows > what that would do to stability. Sure- maybe you could squeeze 2.5GB of > your memory and assign it to photoshop - but would it be worth the machine > randomly rebooting before you had a chance to save?) > > Your other option - make sure your version of Photoshop will run in Windows > XP x64, make sure all your hardware has drivers from Windows XP x64 (and any > other software you plan on using with it works in x64 as well) and install > Windows XP x64. Then you could have 8GB+ of memory if you want and it will > be better managed. > > As for your computer builder's kknowledge of computers - you may want to > allow them to continue building your systems (hardware) - but get yourself > someone else for software/operating system advice... *grin* > > Use these instructions to add the /3GB to your Windows XP boot.ini file: > http://searchwincomputing.techtarget.com/tip/0,289483,sid68_gci1108831,00.html > > Some advice on the /3GB switch in the BOOT.INI: > It will not *make* Windows XP show you that you have 4GB of physical > memory - in fact - Windows XP 32-bit will *never* show you that you have 4GB > of memory. It could even degrade performance of Windows XP itself - > although, not usually as the 1GB is more than enough for the OS and its > needs. It just forces the OS to allocate 3GB to the programs and only 1GB > to the system. > > -- > Shenan Stanley > MS-MVP > -- > How To Ask Questions The Smart Way > http://www.catb.org/~esr/faqs/smart-questions.html > > >
Guest Ken Blake, MVP Posted July 5, 2007 Posted July 5, 2007 Re: Usable RAM On Thu, 5 Jul 2007 08:42:03 -0700, Paul33 <Paul33@discussions.microsoft.com> wrote: > Thanks all. Unfortunately I remain, perhaps as always, confused. I thought > that "virtual memory" was a specified chunk (virtual paging file?) of your > "c" drive that windows uses as if it were RAM; but that installed RAM wasn't > "virtual." Unfortunately, the term "virtual memory" isn't used consistently by all writers, not even within Microsoft. Sometimes you see it defined as the page file (which is not necessarily on C:), but most often Microsoft defines virtual memory as the sum total of all memory available to the computer. That includes RAM *plus* the page file. -- Ken Blake, Microsoft MVP Windows - Shell/User Please Reply to the Newsgroup
Guest Paul33 Posted July 5, 2007 Posted July 5, 2007 Re: Usable RAM Worked like a charm. Now PS says it can see more than 2GB and asks for 1.9+. I fulfilled its desires and now we can only wait and see if it lives up to its promises (oh yes, it also has a 150GB scratch drive all for its greedy little self as well!). Thanks again for everyone's time. cheers Paul "Paul33" wrote: > Thank you Shehan Stanley. I believe I have it now, and thank you for the > reference. And you're right, my builder should have known all this, > particularly as I explained precisely why I wanted the 4 GB. > > Paul
Recommended Posts