General Setup question

[Guest Tony]

Hi,

 

I am currently running Windows 2003 in a single domain with two DC's

at one location with another location authenicating over the WAN to

the two DC's. I am planning on setting up another DC at the offsite

location for authentication. I just want to make sure I am not missing

anything when setting this up so here are my plans:

 

Setting up two sites

 

-Building A with a special subnet

-Building B with a special subnet

 

- Connecting these through a site link and setting the servers in

each. I will have two DC's so I will put a GC at each location. Also

installing DNS on all the DC's.

 

The part where I am confused is the DNS is it smart to put DNS on all

the 4 servers? or just one at each location. Also what do I do with

the FSMO roles do I move them or just leave them alone? currently they

are set to the defaults.

[Guest Ashish]

RE: General Setup question

 

Hi Tony,

 

You have right plans to go:

 

For DNS, I guess you are using AD intigrated DNS zones so the requirement

can be fullfilled using one DNS in each subnet as the zone replication will

take place with the AD replication.

 

Ashish

 

"Tony" wrote:

> Hi,

>

> I am currently running Windows 2003 in a single domain with two DC's

> at one location with another location authenicating over the WAN to

> the two DC's. I am planning on setting up another DC at the offsite

> location for authentication. I just want to make sure I am not missing

> anything when setting this up so here are my plans:

>

> Setting up two sites

>

> -Building A with a special subnet

> -Building B with a special subnet

>

> - Connecting these through a site link and setting the servers in

> each. I will have two DC's so I will put a GC at each location. Also

> installing DNS on all the DC's.

>

> The part where I am confused is the DNS is it smart to put DNS on all

> the 4 servers? or just one at each location. Also what do I do with

> the FSMO roles do I move them or just leave them alone? currently they

> are set to the defaults.

>

>

[Guest Tony]

Re: General Setup question

 

On Jul 5, 12:54 am, Ashish <Ash...@discussions.microsoft.com> wrote:

> Hi Tony,

>

> You have right plans to go:

>

> For DNS, I guess you are using AD intigrated DNS zones so the requirement

> can be fullfilled using one DNS in each subnet as the zone replication will

> take place with the AD replication.

>

> Ashish

>

>

>

> "Tony" wrote:

> > Hi,

>

> > I am currently running Windows 2003 in a single domain with two DC's

> > at one location with another location authenicating over the WAN to

> > the two DC's. I am planning on setting up another DC at the offsite

> > location for authentication. I just want to make sure I am not missing

> > anything when setting this up so here are my plans:

>

> > Setting up two sites

>

> > -Building A with a special subnet

> > -Building B with a special subnet

>

> > - Connecting these through a site link and setting the servers in

> > each. I will have two DC's so I will put a GC at each location. Also

> > installing DNS on all the DC's.

>

> > The part where I am confused is the DNS is it smart to put DNS on all

> > the 4 servers? or just one at each location. Also what do I do with

> > the FSMO roles do I move them or just leave them alone? currently they

> > are set to the defaults.- Hide quoted text -

>

> - Show quoted text -

 

So you are saying don't put DNS on both servers at both sites? Just

put one at each and then for DNS entries put the one at each site as

the primary and the one at the other site as the secondary??