Guest Mark Larkoski Posted July 9, 2007 Posted July 9, 2007 I have installed a new windows 2003 server, and exchange server 2003. I can send mail outside the network, but cannot receive mail from outside the network. Also, I cannot see the new server from inside the network. The server can view the world wide web and see's the outside world, but will not let anyone see it, need help resolving,
Guest Lanwench [MVP - Exchange] Posted July 9, 2007 Posted July 9, 2007 Re: New Server Cannot see domain Mark Larkoski <MarkLarkoski@discussions.microsoft.com> wrote: > I have installed a new windows 2003 server, and exchange server 2003. > I can send mail outside the network, but cannot receive mail from > outside the network. Did you configure the server to handle mail for your domain by adding it to your recipient policy? Set up your domain's public DNS with the appropriate MX records? Allow traffic on TCP 25 inbound to your Exchange server's LAN IP? See http://www.msexchange.org/tutorials/MF002.html - and try posting future Exchange questions in microsoft.public.exchange.* (probably exchange.admin for the most traffic). > Also, I cannot see the new server from inside > the network. How are you trying to find it? If you're trying to use network browsing, you need WINS (all servers/clients should point to the WINS server IP, and NetBIOS over TCP/IP should be enabled). DNS is the other thing you need to worry about - AD relies on properly configured DNS, meaning no public DNS servers must be referenced in any server/client's IP config. But that's different from *browsing*. > The server can view the world wide web and see's the > outside world, but will not let anyone see it, need help resolving, Try posting an unedited ipconfig /all from this server, and from a client on this network.
Guest Mark Larkoski Posted July 10, 2007 Posted July 10, 2007 Re: New Server Cannot see domain Lanwench, This is a brand new server, I have installed from scratch. There are no DNS conflicts, in the event viewer. I can unhook this server and hook up the old, which is a windows 2000 server and exchange 5.5 and mail travels freely. the new server can see the outside world and send mail to the outside world but cannot receive mail. Machines on the network cannot see the server. I am looking for the server several ways, one being in network places and the other simply by the interanl ip #. The server is also a web host and from itself can see the default web page fine. No machine on the network can see the web page though. Mark "Lanwench [MVP - Exchange]" wrote: > Mark Larkoski <MarkLarkoski@discussions.microsoft.com> wrote: > > I have installed a new windows 2003 server, and exchange server 2003. > > I can send mail outside the network, but cannot receive mail from > > outside the network. > > Did you configure the server to handle mail for your domain by adding it to > your recipient policy? > Set up your domain's public DNS with the appropriate MX records? > Allow traffic on TCP 25 inbound to your Exchange server's LAN IP? > > See http://www.msexchange.org/tutorials/MF002.html - and try posting future > Exchange questions in microsoft.public.exchange.* (probably exchange.admin > for the most traffic). > > > Also, I cannot see the new server from inside > > the network. > > How are you trying to find it? If you're trying to use network browsing, you > need WINS (all servers/clients should point to the WINS server IP, and > NetBIOS over TCP/IP should be enabled). > > DNS is the other thing you need to worry about - AD relies on properly > configured DNS, meaning no public DNS servers must be referenced in any > server/client's IP config. But that's different from *browsing*. > > > The server can view the world wide web and see's the > > outside world, but will not let anyone see it, need help resolving, > > Try posting an unedited ipconfig /all from this server, and from a client on > this network. > > >
Guest Lanwench [MVP - Exchange] Posted July 10, 2007 Posted July 10, 2007 Re: New Server Cannot see domain Mark Larkoski <Mark Larkoski@discussions.microsoft.com> wrote: > Lanwench, This is a brand new server, I have installed from scratch. > There are no DNS conflicts, in the event viewer. I can unhook this > server and hook up the old, which is a windows 2000 server and > exchange 5.5 and mail travels freely. the new server can see the > outside world and send mail to the outside world but cannot receive > mail. Machines on the network cannot see the server. I am looking > for the server several ways, one being in network places and the > other simply by the interanl ip #. The server is also a web host and > from itself can see the default web page fine. No machine on the > network can see the web page though. Mark All well and good, but you haven't answered my specific questions or provided the info I requested. > > "Lanwench [MVP - Exchange]" wrote: > >> Mark Larkoski <MarkLarkoski@discussions.microsoft.com> wrote: >>> I have installed a new windows 2003 server, and exchange server >>> 2003. I can send mail outside the network, but cannot receive mail >>> from outside the network. >> >> Did you configure the server to handle mail for your domain by >> adding it to your recipient policy? >> Set up your domain's public DNS with the appropriate MX records? >> Allow traffic on TCP 25 inbound to your Exchange server's LAN IP? >> >> See http://www.msexchange.org/tutorials/MF002.html - and try posting >> future Exchange questions in microsoft.public.exchange.* (probably >> exchange.admin for the most traffic). >> >>> Also, I cannot see the new server from inside >>> the network. >> >> How are you trying to find it? If you're trying to use network >> browsing, you need WINS (all servers/clients should point to the >> WINS server IP, and NetBIOS over TCP/IP should be enabled). >> >> DNS is the other thing you need to worry about - AD relies on >> properly configured DNS, meaning no public DNS servers must be >> referenced in any server/client's IP config. But that's different >> from *browsing*. >> >>> The server can view the world wide web and see's the >>> outside world, but will not let anyone see it, need help resolving, >> >> Try posting an unedited ipconfig /all from this server, and from a >> client on this network.
Guest Mark Larkoski Posted July 11, 2007 Posted July 11, 2007 Re: New Server Cannot see domain Lanwench, the mx records are setup properly. I did answer this, the old server works fine, the new server is named exactly the same as the old. Your question on if I configured the server in the recipient policy is redundent. It was a install from scratch. Exchange server install, installs the recipient policy correctly by itself. Your other question was if the firewall was setup to handle mail through port 25, I responded that the old server works fine which would mean that the firewall is setup to handle mail through port 25. What did you mean by your comment on DNS. Should the only DNS number for the server be 127.0.0.1 and also any client on the network? Also, I have 5 other servers setup on different networks exactly like this one and do not use WINS server. Does WINS server need to be running for the client to see the Domain? Thanks, Mark "Lanwench [MVP - Exchange]" wrote: > Mark Larkoski <Mark Larkoski@discussions.microsoft.com> wrote: > > Lanwench, This is a brand new server, I have installed from scratch. > > There are no DNS conflicts, in the event viewer. I can unhook this > > server and hook up the old, which is a windows 2000 server and > > exchange 5.5 and mail travels freely. the new server can see the > > outside world and send mail to the outside world but cannot receive > > mail. Machines on the network cannot see the server. I am looking > > for the server several ways, one being in network places and the > > other simply by the interanl ip #. The server is also a web host and > > from itself can see the default web page fine. No machine on the > > network can see the web page though. Mark > > All well and good, but you haven't answered my specific questions or > provided the info I requested. > > > > "Lanwench [MVP - Exchange]" wrote: > > > >> Mark Larkoski <MarkLarkoski@discussions.microsoft.com> wrote: > >>> I have installed a new windows 2003 server, and exchange server > >>> 2003. I can send mail outside the network, but cannot receive mail > >>> from outside the network. > >> > >> Did you configure the server to handle mail for your domain by > >> adding it to your recipient policy? > >> Set up your domain's public DNS with the appropriate MX records? > >> Allow traffic on TCP 25 inbound to your Exchange server's LAN IP? > >> > >> See http://www.msexchange.org/tutorials/MF002.html - and try posting > >> future Exchange questions in microsoft.public.exchange.* (probably > >> exchange.admin for the most traffic). > >> > >>> Also, I cannot see the new server from inside > >>> the network. > >> > >> How are you trying to find it? If you're trying to use network > >> browsing, you need WINS (all servers/clients should point to the > >> WINS server IP, and NetBIOS over TCP/IP should be enabled). > >> > >> DNS is the other thing you need to worry about - AD relies on > >> properly configured DNS, meaning no public DNS servers must be > >> referenced in any server/client's IP config. But that's different > >> from *browsing*. > >> > >>> The server can view the world wide web and see's the > >>> outside world, but will not let anyone see it, need help resolving, > >> > >> Try posting an unedited ipconfig /all from this server, and from a > >> client on this network. > > > >
Guest Mark Larkoski Posted July 11, 2007 Posted July 11, 2007 Re: New Server Cannot see domain Lanwench, here is some new data, I am currently working on this new server. I can remotely log into a clients computer through remote desktop but cannot remotely connect from that client to the new server. The new server is set to allow remote desktop. It is like there is a firewall turned on not to let any inbound traffic into the new server. Is there something built into Server 2003 that does this that I can turn off, thanks, Mark "Lanwench [MVP - Exchange]" wrote: > Mark Larkoski <Mark Larkoski@discussions.microsoft.com> wrote: > > Lanwench, This is a brand new server, I have installed from scratch. > > There are no DNS conflicts, in the event viewer. I can unhook this > > server and hook up the old, which is a windows 2000 server and > > exchange 5.5 and mail travels freely. the new server can see the > > outside world and send mail to the outside world but cannot receive > > mail. Machines on the network cannot see the server. I am looking > > for the server several ways, one being in network places and the > > other simply by the interanl ip #. The server is also a web host and > > from itself can see the default web page fine. No machine on the > > network can see the web page though. Mark > > All well and good, but you haven't answered my specific questions or > provided the info I requested. > > > > "Lanwench [MVP - Exchange]" wrote: > > > >> Mark Larkoski <MarkLarkoski@discussions.microsoft.com> wrote: > >>> I have installed a new windows 2003 server, and exchange server > >>> 2003. I can send mail outside the network, but cannot receive mail > >>> from outside the network. > >> > >> Did you configure the server to handle mail for your domain by > >> adding it to your recipient policy? > >> Set up your domain's public DNS with the appropriate MX records? > >> Allow traffic on TCP 25 inbound to your Exchange server's LAN IP? > >> > >> See http://www.msexchange.org/tutorials/MF002.html - and try posting > >> future Exchange questions in microsoft.public.exchange.* (probably > >> exchange.admin for the most traffic). > >> > >>> Also, I cannot see the new server from inside > >>> the network. > >> > >> How are you trying to find it? If you're trying to use network > >> browsing, you need WINS (all servers/clients should point to the > >> WINS server IP, and NetBIOS over TCP/IP should be enabled). > >> > >> DNS is the other thing you need to worry about - AD relies on > >> properly configured DNS, meaning no public DNS servers must be > >> referenced in any server/client's IP config. But that's different > >> from *browsing*. > >> > >>> The server can view the world wide web and see's the > >>> outside world, but will not let anyone see it, need help resolving, > >> > >> Try posting an unedited ipconfig /all from this server, and from a > >> client on this network. > > > >
Guest Mark Larkoski Posted July 11, 2007 Posted July 11, 2007 Re: New Server Cannot see domain Lanwench, Now everything is working except for I cannot get Microsoft Outlook to receive mail. It will send mail, not receive. To fix original problem I hooked up the second nic to our internal network and gave it a internal ip #. Then I could send mail and receive mail and log onto the domain. I sent and received mail through microsoft outlook web access both remotely and internally. I have tried outlook with interal ip #'s such as 192.168.4.8 which is the ip of the email server and martin.k12.mn.us neither work. Mark "Lanwench [MVP - Exchange]" wrote: > Mark Larkoski <Mark Larkoski@discussions.microsoft.com> wrote: > > Lanwench, This is a brand new server, I have installed from scratch. > > There are no DNS conflicts, in the event viewer. I can unhook this > > server and hook up the old, which is a windows 2000 server and > > exchange 5.5 and mail travels freely. the new server can see the > > outside world and send mail to the outside world but cannot receive > > mail. Machines on the network cannot see the server. I am looking > > for the server several ways, one being in network places and the > > other simply by the interanl ip #. The server is also a web host and > > from itself can see the default web page fine. No machine on the > > network can see the web page though. Mark > > All well and good, but you haven't answered my specific questions or > provided the info I requested. > > > > "Lanwench [MVP - Exchange]" wrote: > > > >> Mark Larkoski <MarkLarkoski@discussions.microsoft.com> wrote: > >>> I have installed a new windows 2003 server, and exchange server > >>> 2003. I can send mail outside the network, but cannot receive mail > >>> from outside the network. > >> > >> Did you configure the server to handle mail for your domain by > >> adding it to your recipient policy? > >> Set up your domain's public DNS with the appropriate MX records? > >> Allow traffic on TCP 25 inbound to your Exchange server's LAN IP? > >> > >> See http://www.msexchange.org/tutorials/MF002.html - and try posting > >> future Exchange questions in microsoft.public.exchange.* (probably > >> exchange.admin for the most traffic). > >> > >>> Also, I cannot see the new server from inside > >>> the network. > >> > >> How are you trying to find it? If you're trying to use network > >> browsing, you need WINS (all servers/clients should point to the > >> WINS server IP, and NetBIOS over TCP/IP should be enabled). > >> > >> DNS is the other thing you need to worry about - AD relies on > >> properly configured DNS, meaning no public DNS servers must be > >> referenced in any server/client's IP config. But that's different > >> from *browsing*. > >> > >>> The server can view the world wide web and see's the > >>> outside world, but will not let anyone see it, need help resolving, > >> > >> Try posting an unedited ipconfig /all from this server, and from a > >> client on this network. > > > >
Guest Lanwench [MVP - Exchange] Posted July 11, 2007 Posted July 11, 2007 Re: New Server Cannot see domain Mark Larkoski <MarkLarkoski@discussions.microsoft.com> wrote: > Lanwench, the mx records are setup properly. I did answer this, Where? > the > old server works fine, the new server is named exactly the same as > the old. That isn't relevant....and in fact could be a problem. You can't have two identically named Exchange servers, and you can't have properly removed the old one from AD if, as you say, it works when you plug it in. >Your question on if I configured the server in the > recipient policy is redundent. It was a install from scratch. > Exchange server install, installs the recipient policy correctly by > itself. Yes, it *installs* it. But I was asking how you personally *configured* it. It can't possibly intuit what your internet domains are. > Your other question was if the firewall was setup to handle > mail through port 25, I responded that the old server works fine > which would mean that the firewall is setup to handle mail through > port 25. No, not necessarily. > What did you mean by your comment on DNS. Should the only > DNS number for the server be 127.0.0.1 No. It should be the LAN IP assigned to the DNS server. Not the localhost/loopback. > and also any client on the > network? They need to have only the same/internal LAN IP of your DNS server as well. >Also, I have 5 other servers setup on different networks > exactly like this one and do not use WINS server. Does WINS server > need to be running for the client to see the Domain? If you want people to browse successfully, yes. > Thanks, Mark NB: If you want help in these groups, it's wise to reply to people's specific questions with the types of answers they've requested. Don't paraphrase, don't assume we can see your system, etc. > > "Lanwench [MVP - Exchange]" wrote: > >> Mark Larkoski <Mark Larkoski@discussions.microsoft.com> wrote: >>> Lanwench, This is a brand new server, I have installed from scratch. >>> There are no DNS conflicts, in the event viewer. I can unhook this >>> server and hook up the old, which is a windows 2000 server and >>> exchange 5.5 and mail travels freely. the new server can see the >>> outside world and send mail to the outside world but cannot receive >>> mail. Machines on the network cannot see the server. I am looking >>> for the server several ways, one being in network places and the >>> other simply by the interanl ip #. The server is also a web host >>> and from itself can see the default web page fine. No machine on >>> the network can see the web page though. Mark >> >> All well and good, but you haven't answered my specific questions or >> provided the info I requested. >>> >>> "Lanwench [MVP - Exchange]" wrote: >>> >>>> Mark Larkoski <MarkLarkoski@discussions.microsoft.com> wrote: >>>>> I have installed a new windows 2003 server, and exchange server >>>>> 2003. I can send mail outside the network, but cannot receive mail >>>>> from outside the network. >>>> >>>> Did you configure the server to handle mail for your domain by >>>> adding it to your recipient policy? >>>> Set up your domain's public DNS with the appropriate MX records? >>>> Allow traffic on TCP 25 inbound to your Exchange server's LAN IP? >>>> >>>> See http://www.msexchange.org/tutorials/MF002.html - and try >>>> posting future Exchange questions in microsoft.public.exchange.* >>>> (probably exchange.admin for the most traffic). >>>> >>>>> Also, I cannot see the new server from inside >>>>> the network. >>>> >>>> How are you trying to find it? If you're trying to use network >>>> browsing, you need WINS (all servers/clients should point to the >>>> WINS server IP, and NetBIOS over TCP/IP should be enabled). >>>> >>>> DNS is the other thing you need to worry about - AD relies on >>>> properly configured DNS, meaning no public DNS servers must be >>>> referenced in any server/client's IP config. But that's different >>>> from *browsing*. >>>> >>>>> The server can view the world wide web and see's the >>>>> outside world, but will not let anyone see it, need help >>>>> resolving, >>>> >>>> Try posting an unedited ipconfig /all from this server, and from a >>>> client on this network.
Guest Lanwench [MVP - Exchange] Posted July 11, 2007 Posted July 11, 2007 Re: New Server Cannot see domain Mark Larkoski <MarkLarkoski@discussions.microsoft.com> wrote: > Lanwench, here is some new data, I am currently working on this new > server. I can remotely log into a clients computer through remote > desktop but cannot remotely connect from that client to the new > server. The new server is set to allow remote desktop. It is like > there is a firewall turned on not to let any inbound traffic into the > new server. Is there something built into Server 2003 that does this > that I can turn off, thanks, Mark Only if you have two NICs or have installed a third party firewall app on your server. Besides mentioning the exact error messages you're getting, you need to provide more detail, such as the ipconfig /all from the server & from a client, for which I have now asked twice :) <snip>
Guest Lanwench [MVP - Exchange] Posted July 11, 2007 Posted July 11, 2007 Re: New Server Cannot see domain Mark Larkoski <MarkLarkoski@discussions.microsoft.com> wrote: > Lanwench, Now everything is working What have you changed? > except for I cannot get Microsoft > Outlook to receive mail. It will send mail, not receive. If you have Exchange, why are you using an Internet Mail account in Outlook? Don't do that. Have Exchange handle your mail. No POP, no IMAP, no PST. > To fix > original problem I hooked up the second nic Second NIC on what?? > to our internal network > and gave it a internal ip #. Then I could send mail and receive mail > and log onto the domain. I sent and received mail through microsoft > outlook web access both remotely and internally. I have tried > outlook with interal ip #'s such as 192.168.4.8 which is the ip of > the email server and martin.k12.mn.us neither work. Mark Please read my other replies. <snip>
Guest for1 Posted October 4, 2007 Posted October 4, 2007 RE: New Server Cannot see domain Mark, I was setting up outlook and clicked the button that says I will use an Exchange Server, but I won't now when I try to open Outlook I can't I get a message that says "Connection to Exchanger Server is unavailable, must be on line" I am on line but I don't have an Exchange Server. Can you give advise? -- Sober Man "Mark Larkoski" wrote: > I have installed a new windows 2003 server, and exchange server 2003. I can > send mail outside the network, but cannot receive mail from outside the > network. Also, I cannot see the new server from inside the network. The > server can view the world wide web and see's the outside world, but will not > let anyone see it, need help resolving,
Recommended Posts