Guest Robert Vilhelmsen Posted July 24, 2007 Posted July 24, 2007 Hi, I have reinstalled our W2K Std. Server from a SP4 build CD. I have given the server a new name, but IP address, shares ect. is the same. But after the reinstallation SMB communication to file shares is very slow, this can very easy be seen when we open documents from Adobe Indesign CS2. I am getting the following errors from a packet captures (from a WinXP SP2 client): SMB NT create andX request/response: 1) QUERY_PATH_INFO Parameters Level of Interest: Query File Basic Info (1004) Reserved: 00000000 File Name: \path\to\the\files\...\...\.....\shell32.dll 2) SMB Command: Trans2 (0x32) NT Status: STATUS_OBJECT_NAME_NOT_FOUND (0xc0000034) This happens for every file the client browse or opens and there is a lot. Normal file copy, ftp, veritas backupexec remotebackup ect. to the same server runs with normal speed. I have checket the information on the dns server and Wins server is correct and all clients have correct IP information. It is a standard installation and only the actual reinstallation is the only thing that has changed. All swicthes/clients/cables is the same. I do not use any kind of QoS on my switches. Before the reinstallation I removed the server from the domain and attached the server to the domain again after rebuild with the new name. Before reinstallation communication was running without problems. Nearly all clients are WinXP PRO SP2, some are MAC OS10. Any ideas what is causing this SMB errors? Regards Robert Vilhelmsen
Guest Coraleigh Miller Posted July 25, 2007 Posted July 25, 2007 Re: STATUS_OBJECT_NAME_NOT_FOUND Do any of the applications list the old servername as part of a unc path, such as MS Word's file locations configuration menu? Are there any old local host files on the clients listing the old servername? Are there any old shares on the client in the My Network Places? If this is also a print server you might want to check that the port configuration on the client pcs reflects the new servername. Coraleigh Miller "Robert Vilhelmsen" <robert.vilhelmsen@microcom.dk> wrote in message news:uTwGA%23czHHA.4276@TK2MSFTNGP05.phx.gbl... > Hi, > > I have reinstalled our W2K Std. Server from a SP4 build CD. I have given > the server a new name, but IP address, shares ect. is the same. But after > the reinstallation SMB communication to file shares is very slow, this can > very easy be seen when we open documents from Adobe Indesign CS2. > > I am getting the following errors from a packet captures (from a WinXP SP2 > client): > > SMB NT create andX request/response: > > 1) QUERY_PATH_INFO Parameters > Level of Interest: Query File Basic Info (1004) > Reserved: 00000000 > File Name: \path\to\the\files\...\...\.....\shell32.dll > > 2) SMB Command: Trans2 (0x32) > NT Status: STATUS_OBJECT_NAME_NOT_FOUND (0xc0000034) > > This happens for every file the client browse or opens and there is a lot. > > Normal file copy, ftp, veritas backupexec remotebackup ect. to the same > server runs with normal speed. > I have checket the information on the dns server and Wins server is > correct and all clients have correct IP information. > > It is a standard installation and only the actual reinstallation is the > only thing that has changed. All swicthes/clients/cables is the same. I do > not use any kind of QoS on my switches. > > Before the reinstallation I removed the server from the domain and > attached the server to the domain again after rebuild with the new name. > Before reinstallation communication was running without problems. > > Nearly all clients are WinXP PRO SP2, some are MAC OS10. > > Any ideas what is causing this SMB errors? > > Regards > Robert Vilhelmsen > > >
Guest Robert Vilhelmsen Posted July 25, 2007 Posted July 25, 2007 Re: STATUS_OBJECT_NAME_NOT_FOUND "Coraleigh Miller" <CoraleighMiller@yahoo.com> skrev i en meddelelse news:%232BBd5ozHHA.464@TK2MSFTNGP02.phx.gbl... > Do any of the applications list the old servername as part of a unc path, > such as MS Word's file locations configuration menu? > Are there any old local host files on the clients listing the old > servername? > Are there any old shares on the client in the My Network Places? > If this is also a print server you might want to check that the port > configuration on the client pcs reflects the new servername. > Hi Coraleigh, I have tried to completly uninstall Adobe CS package and remove Adobe´s cache files ect. The local host file is correct on the machines and I have removed "old" shares from My Network Places. I have not cheket regarding the local printserver, but I will do that right now. /Robert
Guest Robert Vilhelmsen Posted July 25, 2007 Posted July 25, 2007 Re: STATUS_OBJECT_NAME_NOT_FOUND "Robert Vilhelmsen" <robert.vilhelmsen@microcom.dk> skrev i en meddelelse news:Oi9c3EpzHHA.3940@TK2MSFTNGP05.phx.gbl... > > "Coraleigh Miller" <CoraleighMiller@yahoo.com> skrev i en meddelelse > news:%232BBd5ozHHA.464@TK2MSFTNGP02.phx.gbl... >> Do any of the applications list the old servername as part of a unc path, >> such as MS Word's file locations configuration menu? >> Are there any old local host files on the clients listing the old >> servername? >> Are there any old shares on the client in the My Network Places? >> If this is also a print server you might want to check that the port >> configuration on the client pcs reflects the new servername. >> > > I have dobbelt checked there´s no reference to the old server name and deleted all references i reg.base to the old server name as well. Still painfully slow though. I have done a packet capture when we try to open a document on another server and here I get the same errors: File Name: \30 dummy - FYN-mappe\shell32.dll NT Status: STATUS_OBJECT_NAME_NOT_FOUND (0xc0000034) Is the above message just a notification that SMB cannot find the file shell32.dll in the current location and then tries to locate shell32.dll in it´s own search path instead? And it´s actual not a error it cannot find the file Indesign is looking for. I have checked the settings on the Zyxel ES3124 switch and there no QoS/storm control/etc. configured. I will try to upgrade/downgrade the Intel fiber NIC and Mylex AccelRaid 352 controller drivers on the actual server to see if it changes anything. What I do not understand - opening documents is way to slow, but a normal filecopy is very fast indeed? /Robert
Guest Coraleigh Miller Posted July 25, 2007 Posted July 25, 2007 Re: STATUS_OBJECT_NAME_NOT_FOUND Hi Robert, You could try clearing out your DNS and WINS cache. Also check that your Master Browser service is still configd correctly (browstat status), and that your master browser is not multihomed. Coraleigh Miller "Robert Vilhelmsen" <robert.vilhelmsen@microcom.dk> wrote in message news:Ouj5cDszHHA.5484@TK2MSFTNGP03.phx.gbl... > > "Robert Vilhelmsen" <robert.vilhelmsen@microcom.dk> skrev i en meddelelse > news:Oi9c3EpzHHA.3940@TK2MSFTNGP05.phx.gbl... >> >> "Coraleigh Miller" <CoraleighMiller@yahoo.com> skrev i en meddelelse >> news:%232BBd5ozHHA.464@TK2MSFTNGP02.phx.gbl... >>> Do any of the applications list the old servername as part of a unc >>> path, such as MS Word's file locations configuration menu? >>> Are there any old local host files on the clients listing the old >>> servername? >>> Are there any old shares on the client in the My Network Places? >>> If this is also a print server you might want to check that the port >>> configuration on the client pcs reflects the new servername. >>> >> >> > > I have dobbelt checked there´s no reference to the old server name and > deleted all references i reg.base to the old server name as well. Still > painfully slow though. > I have done a packet capture when we try to open a document on another > server and here I get the same errors: > > File Name: \30 dummy - FYN-mappe\shell32.dll > NT Status: STATUS_OBJECT_NAME_NOT_FOUND (0xc0000034) > > Is the above message just a notification that SMB cannot find the file > shell32.dll in the current location and then tries to locate shell32.dll > in it´s own search path instead? And it´s actual not a error it cannot > find the file Indesign is looking for. > > I have checked the settings on the Zyxel ES3124 switch and there no > QoS/storm control/etc. configured. > > I will try to upgrade/downgrade the Intel fiber NIC and Mylex AccelRaid > 352 controller drivers on the actual server to see if it changes anything. > > What I do not understand - opening documents is way to slow, but a normal > filecopy is very fast indeed? > > /Robert > > >
Guest Robert Vilhelmsen Posted July 26, 2007 Posted July 26, 2007 Re: STATUS_OBJECT_NAME_NOT_FOUND Hi Coraleigh, dns and wins cache is cleared out. Browstat status seems to be fine. Master brower is FSMO server and nowhere is the old servername listet. Have just tried to replace a switch and it did not help. Even tried to switch the server from a fiber NIC to a normal 100Mbit cobber nic with the same effect. /Robert "Coraleigh Miller" <CoraleighMiller@yahoo.com> skrev i en meddelelse news:%23fojXDxzHHA.5484@TK2MSFTNGP03.phx.gbl... > Hi Robert, > > You could try clearing out your DNS and WINS cache. Also check that your > Master Browser service is still configd correctly (browstat status), and > that your master browser is not multihomed. >
Guest Robert Vilhelmsen Posted July 26, 2007 Posted July 26, 2007 Re: STATUS_OBJECT_NAME_NOT_FOUND here is some more info: I have installed Indesign on a terminalserver 2003 and opened a document from here from the same network share. It´s approx. twice as fast to open here than all my WinXP PRO SP2 clients. Both the WTS server and clients are on the same switch and all linked up with gigabit speed. The NIC the WTS is a broadcom and on the client it´s Intel PRO1000 GT desktop adaptors. A XP client open a document with approx. 1Mb/sec and the WTS do it with approx. 3-4Mb/sec. What is more weird: When we boot the fileserver and let it stand at the login screen (crtl+alt+del) the keyboard, time/date format is US, but as soon we login as administrator it changes to DK (we are in Denmark). What happens here? Could it be a SMB signing issue between XP and W2K? Robert > > "Coraleigh Miller" <CoraleighMiller@yahoo.com> skrev i en meddelelse > news:%23fojXDxzHHA.5484@TK2MSFTNGP03.phx.gbl... >> Hi Robert, >> >> You could try clearing out your DNS and WINS cache. Also check that your >> Master Browser service is still configd correctly (browstat status), and >> that your master browser is not multihomed. >> > >
Guest Coraleigh Miller Posted July 27, 2007 Posted July 27, 2007 Re: STATUS_OBJECT_NAME_NOT_FOUND Ok here are a few more things to try.. Check out this article regarding your STATUS_OBJECT_NAME_NOT_FOUND (0xc0000034) error http://support.microsoft.com/kb/822052 Make sure that your newly rebuilt 2000 server has the right Link Speed and Duplex set on the nic. Also..that time/date change concerns me..do you have a time server configured on your PDC Emulator with clients pointing to it? Is there more than 5 minutes time differnce between them? I will do abit of research later on why its not staying DK through a reboot. :-) Coraleigh "Robert Vilhelmsen" <robert.vilhelmsen@microcom.dk> wrote in message news:eguMEW4zHHA.1184@TK2MSFTNGP04.phx.gbl... > here is some more info: > > I have installed Indesign on a terminalserver 2003 and opened a document > from here from the same network share. > It´s approx. twice as fast to open here than all my WinXP PRO SP2 clients. > > Both the WTS server and clients are on the same switch and all linked up > with gigabit speed. The NIC the WTS is a broadcom and on the client it´s > Intel PRO1000 GT desktop adaptors. > > A XP client open a document with approx. 1Mb/sec and the WTS do it with > approx. 3-4Mb/sec. > > What is more weird: When we boot the fileserver and let it stand at the > login screen (crtl+alt+del) the keyboard, time/date format is US, but as > soon we login as administrator it changes to DK (we are in Denmark). > What happens here? > > Could it be a SMB signing issue between XP and W2K? > > Robert > > >> >> "Coraleigh Miller" <CoraleighMiller@yahoo.com> skrev i en meddelelse >> news:%23fojXDxzHHA.5484@TK2MSFTNGP03.phx.gbl... >>> Hi Robert, >>> >>> You could try clearing out your DNS and WINS cache. Also check that >>> your Master Browser service is still configd correctly (browstat >>> status), and that your master browser is not multihomed. >>> >> >> > >
Guest Coraleigh Miller Posted July 27, 2007 Posted July 27, 2007 Re: STATUS_OBJECT_NAME_NOT_FOUND Well here is the closest thing I could find to your regional settings format issue, even though its pretty simple and youve probably already tried it :-) .... "Alternate Language Keyboards for Login" - http://www.microsoft.com/globaldev/DrIntl/columns/021/default.mspx I think i read your last sentence wrong with my last post response, you meant that the date/time format was different, not the actual time zone changed correct? Well it might be good to make sure your clients are sharing the same time with your servers anyways. Coraleigh "Coraleigh Miller" <CoraleighMiller@yahoo.com> wrote in message news:%23p09z3%23zHHA.1212@TK2MSFTNGP05.phx.gbl... > Ok here are a few more things to try.. > > Check out this article regarding your STATUS_OBJECT_NAME_NOT_FOUND > (0xc0000034) error http://support.microsoft.com/kb/822052 > > Make sure that your newly rebuilt 2000 server has the right Link Speed and > Duplex set on the nic. > > Also..that time/date change concerns me..do you have a time server > configured on your PDC Emulator with clients pointing to it? Is there > more than 5 minutes time differnce between them? I will do abit of > research later on why its not staying DK through a reboot. > > :-) > Coraleigh > > > "Robert Vilhelmsen" <robert.vilhelmsen@microcom.dk> wrote in message > news:eguMEW4zHHA.1184@TK2MSFTNGP04.phx.gbl... >> here is some more info: >> >> I have installed Indesign on a terminalserver 2003 and opened a document >> from here from the same network share. >> It´s approx. twice as fast to open here than all my WinXP PRO SP2 >> clients. >> >> Both the WTS server and clients are on the same switch and all linked up >> with gigabit speed. The NIC the WTS is a broadcom and on the client it´s >> Intel PRO1000 GT desktop adaptors. >> >> A XP client open a document with approx. 1Mb/sec and the WTS do it with >> approx. 3-4Mb/sec. >> >> What is more weird: When we boot the fileserver and let it stand at the >> login screen (crtl+alt+del) the keyboard, time/date format is US, but as >> soon we login as administrator it changes to DK (we are in Denmark). >> What happens here? >> >> Could it be a SMB signing issue between XP and W2K? >> >> Robert >> >> >>> >>> "Coraleigh Miller" <CoraleighMiller@yahoo.com> skrev i en meddelelse >>> news:%23fojXDxzHHA.5484@TK2MSFTNGP03.phx.gbl... >>>> Hi Robert, >>>> >>>> You could try clearing out your DNS and WINS cache. Also check that >>>> your Master Browser service is still configd correctly (browstat >>>> status), and that your master browser is not multihomed. >>>> >>> >>> >> >> > >
Guest Robert Vilhelmsen Posted July 27, 2007 Posted July 27, 2007 Re: STATUS_OBJECT_NAME_NOT_FOUND Thank you. Link/speed/duplex match so thats not it :( I will read the links..... Here´s what I have done so far. I have replaced a single 10/100 swicth with a pure Gigabit swith. There a several Gigabit switches and only one 10/100 switch. It seems to have helped just a little bit to switch to pure gigabit speed, but not enough at all. It might have something to do with switchport buffering on giga port contra fastethernet. And the fact SMB is very chatty. But I thing Indesign do some odd things with it documents, because I have added the old servername on the clients host-file and that seems to help quite a bit when Indesign opens documents. It seems that Indesign do not update internal document links to external pictures, if the actual picture is deleted. This I have to check with Adobe. My though was: if the server is running with US date/time format and the clients is running with DK date/time format there might be some problems with smb signing. Robert "Coraleigh Miller" <CoraleighMiller@yahoo.com> skrev i en meddelelse news:u3vDEUC0HHA.3916@TK2MSFTNGP02.phx.gbl... > Well here is the closest thing I could find to your regional settings > format issue, even though its pretty simple and youve probably already > tried it :-) .... > "Alternate Language Keyboards for Login" - > http://www.microsoft.com/globaldev/DrIntl/columns/021/default.mspx > > I think i read your last sentence wrong with my last post response, you > meant that the date/time format was different, not the actual time zone > changed correct? Well it might be good to make sure your clients are > sharing the same time with your servers anyways. >
Recommended Posts