WSUS 3 - showing computers but only one at a time

[Guest Ehren]

Hello-

 

I have a very strange issue that I have never seen before and wonder if

anyone else has any experience with it.

 

We have several computer labs here, each with 10-12 computers. We have a

main domain, call it "maindomain" and then we have a separate domain for the

labs ... call it "teaching". The WSUS server is in the maindomain and

obviously the lab computers are in the teaching domain. In my head this

shouldnt be an issue because you just configure the computers via group

policy to point to the wsus server and it really doesnt matter what domain

its in because its http (right?).

 

To save myself dns hasstles I configured automatic updates via group policy

for this lab in the teaching domain, setting the update location to be

http://<ipaddress_of_WSUS_server>. The WSUS server update site is configured

as the default site on port 80.

 

All of the computers in the lab have recieved updates from the WSUS server

and have installed them automatically as they should (i know this because

thier ip range does not have internet access so if not for the wsus server

its impossible to download updates). Last night at the scheduled time they

all rebooted and installed 12 updates that they had scheduled.

 

heres the interesting part...10 of the computers are all dell Optiplex

GX280's and one is a Dell Optiplex 170L. The 170L (bps1263-11) ALWAYS shows

up in the update services console. However bps1263-xx (where xx=1-10) show

up in the console, but no more than one at a time. I.e. bps1263-00 will

show up for a while, then that will be gone and bps1263-07 will show up, then

that will be gone and bps1263-04 will show up and on and on.

 

All of these computers were imaged using sysprep. So although they all use

the same image they all have unique sid's and the like because they all went

through the mini-windows welcome setup after they were imaged.

 

Any ideas here? This is blowing my mind! :)

 

TIA - Ehren

[Guest Ehren]

RE: WSUS 3 - showing computers but only one at a time

 

As a note they are all configured to use a proxy...however they are

configured to not use the proxy server for local (intranet) addresses.

Figured I would note that even though I feel it is irrelevent since this is a

local address we are dealing with.

 

"Ehren" wrote:

> Hello-

>

> I have a very strange issue that I have never seen before and wonder if

> anyone else has any experience with it.

>

> We have several computer labs here, each with 10-12 computers. We have a

> main domain, call it "maindomain" and then we have a separate domain for the

> labs ... call it "teaching". The WSUS server is in the maindomain and

> obviously the lab computers are in the teaching domain. In my head this

> shouldnt be an issue because you just configure the computers via group

> policy to point to the wsus server and it really doesnt matter what domain

> its in because its http (right?).

>

> To save myself dns hasstles I configured automatic updates via group policy

> for this lab in the teaching domain, setting the update location to be

> http://<ipaddress_of_WSUS_server>. The WSUS server update site is configured

> as the default site on port 80.

>

> All of the computers in the lab have recieved updates from the WSUS server

> and have installed them automatically as they should (i know this because

> thier ip range does not have internet access so if not for the wsus server

> its impossible to download updates). Last night at the scheduled time they

> all rebooted and installed 12 updates that they had scheduled.

>

> heres the interesting part...10 of the computers are all dell Optiplex

> GX280's and one is a Dell Optiplex 170L. The 170L (bps1263-11) ALWAYS shows

> up in the update services console. However bps1263-xx (where xx=1-10) show

> up in the console, but no more than one at a time. I.e. bps1263-00 will

> show up for a while, then that will be gone and bps1263-07 will show up, then

> that will be gone and bps1263-04 will show up and on and on.

>

> All of these computers were imaged using sysprep. So although they all use

> the same image they all have unique sid's and the like because they all went

> through the mini-windows welcome setup after they were imaged.

>

> Any ideas here? This is blowing my mind! :)

>

> TIA - Ehren

[Guest WorkingHard]

Re: WSUS 3 - showing computers but only one at a time

 

What going on is that the WSUS ID is not unique ... is created when the PC

is first connected to WSUS and not there after. So if your master imahe had

a WSUS ID now all your image created PC's have the same ones. For WSUS 2 the

fix is as follows:

use regedit and go to

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate

delete the following entries

"PingID"

"AccountDomainSid"

"SusClientId"

then retart the two services /restart PC

For good measure you can also run wuauclt.exe /resetauthorization /detectnow

in the command console

 

This can be scripted and various scripts can be found on line

 

http://www.wsus.info/forums/lofiversion/index.php?t8698.html

 

run it as a start up script and it will fix stuf. This is how we do it.

 

 

"Ehren" <Ehren@discussions.microsoft.com> wrote in message

news:AB820213-454C-4392-9EB5-BB76B88703E7@microsoft.com...

> Hello-

>

> I have a very strange issue that I have never seen before and wonder if

> anyone else has any experience with it.

>

> We have several computer labs here, each with 10-12 computers. We have a

> main domain, call it "maindomain" and then we have a separate domain for

> the

> labs ... call it "teaching". The WSUS server is in the maindomain and

> obviously the lab computers are in the teaching domain. In my head this

> shouldnt be an issue because you just configure the computers via group

> policy to point to the wsus server and it really doesnt matter what domain

> its in because its http (right?).

>

> To save myself dns hasstles I configured automatic updates via group

> policy

> for this lab in the teaching domain, setting the update location to be

> http://<ipaddress_of_WSUS_server>. The WSUS server update site is

> configured

> as the default site on port 80.

>

> All of the computers in the lab have recieved updates from the WSUS server

> and have installed them automatically as they should (i know this because

> thier ip range does not have internet access so if not for the wsus server

> its impossible to download updates). Last night at the scheduled time

> they

> all rebooted and installed 12 updates that they had scheduled.

>

> heres the interesting part...10 of the computers are all dell Optiplex

> GX280's and one is a Dell Optiplex 170L. The 170L (bps1263-11) ALWAYS

> shows

> up in the update services console. However bps1263-xx (where xx=1-10)

> show

> up in the console, but no more than one at a time. I.e. bps1263-00 will

> show up for a while, then that will be gone and bps1263-07 will show up,

> then

> that will be gone and bps1263-04 will show up and on and on.

>

> All of these computers were imaged using sysprep. So although they all

> use

> the same image they all have unique sid's and the like because they all

> went

> through the mini-windows welcome setup after they were imaged.

>

> Any ideas here? This is blowing my mind! :)

>

> TIA - Ehren

[Guest Ehren]

Re: WSUS 3 - showing computers but only one at a time

 

I have WSUS 3 but maybe its the same

 

what file extension would that script have when saved?

 

Thanks

 

"WorkingHard" wrote:

> What going on is that the WSUS ID is not unique ... is created when the PC

> is first connected to WSUS and not there after. So if your master imahe had

> a WSUS ID now all your image created PC's have the same ones. For WSUS 2 the

> fix is as follows:

> use regedit and go to

> HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate

> delete the following entries

> "PingID"

> "AccountDomainSid"

> "SusClientId"

> then retart the two services /restart PC

> For good measure you can also run wuauclt.exe /resetauthorization /detectnow

> in the command console

>

> This can be scripted and various scripts can be found on line

>

> http://www.wsus.info/forums/lofiversion/index.php?t8698.html

>

> run it as a start up script and it will fix stuf. This is how we do it.

>

>

> "Ehren" <Ehren@discussions.microsoft.com> wrote in message

> news:AB820213-454C-4392-9EB5-BB76B88703E7@microsoft.com...

> > Hello-

> >

> > I have a very strange issue that I have never seen before and wonder if

> > anyone else has any experience with it.

> >

> > We have several computer labs here, each with 10-12 computers. We have a

> > main domain, call it "maindomain" and then we have a separate domain for

> > the

> > labs ... call it "teaching". The WSUS server is in the maindomain and

> > obviously the lab computers are in the teaching domain. In my head this

> > shouldnt be an issue because you just configure the computers via group

> > policy to point to the wsus server and it really doesnt matter what domain

> > its in because its http (right?).

> >

> > To save myself dns hasstles I configured automatic updates via group

> > policy

> > for this lab in the teaching domain, setting the update location to be

> > http://<ipaddress_of_WSUS_server>. The WSUS server update site is

> > configured

> > as the default site on port 80.

> >

> > All of the computers in the lab have recieved updates from the WSUS server

> > and have installed them automatically as they should (i know this because

> > thier ip range does not have internet access so if not for the wsus server

> > its impossible to download updates). Last night at the scheduled time

> > they

> > all rebooted and installed 12 updates that they had scheduled.

> >

> > heres the interesting part...10 of the computers are all dell Optiplex

> > GX280's and one is a Dell Optiplex 170L. The 170L (bps1263-11) ALWAYS

> > shows

> > up in the update services console. However bps1263-xx (where xx=1-10)

> > show

> > up in the console, but no more than one at a time. I.e. bps1263-00 will

> > show up for a while, then that will be gone and bps1263-07 will show up,

> > then

> > that will be gone and bps1263-04 will show up and on and on.

> >

> > All of these computers were imaged using sysprep. So although they all

> > use

> > the same image they all have unique sid's and the like because they all

> > went

> > through the mini-windows welcome setup after they were imaged.

> >

> > Any ideas here? This is blowing my mind! :)

> >

> > TIA - Ehren

>

>

>

[Guest WorkingHard]

Re: WSUS 3 - showing computers but only one at a time

 

it's vbs Visual Basic script

 

Just check the registry I can't get to a WSUS 3 client right now to look

myself.

 

 

"Ehren" <Ehren@discussions.microsoft.com> wrote in message

news:8E0E5EAA-1436-47E2-A629-97DEE646D40F@microsoft.com...

>I have WSUS 3 but maybe its the same

>

> what file extension would that script have when saved?

>

> Thanks

>

> "WorkingHard" wrote:

>

>> What going on is that the WSUS ID is not unique ... is created when the

>> PC

>> is first connected to WSUS and not there after. So if your master imahe

>> had

>> a WSUS ID now all your image created PC's have the same ones. For WSUS 2

>> the

>> fix is as follows:

>> use regedit and go to

>> HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate

>> delete the following entries

>> "PingID"

>> "AccountDomainSid"

>> "SusClientId"

>> then retart the two services /restart PC

>> For good measure you can also run wuauclt.exe /resetauthorization

>> /detectnow

>> in the command console

>>

>> This can be scripted and various scripts can be found on line

>>

>> http://www.wsus.info/forums/lofiversion/index.php?t8698.html

>>

>> run it as a start up script and it will fix stuf. This is how we do it.

>>

>>

>> "Ehren" <Ehren@discussions.microsoft.com> wrote in message

>> news:AB820213-454C-4392-9EB5-BB76B88703E7@microsoft.com...

>> > Hello-

>> >

>> > I have a very strange issue that I have never seen before and wonder if

>> > anyone else has any experience with it.

>> >

>> > We have several computer labs here, each with 10-12 computers. We have

>> > a

>> > main domain, call it "maindomain" and then we have a separate domain

>> > for

>> > the

>> > labs ... call it "teaching". The WSUS server is in the maindomain and

>> > obviously the lab computers are in the teaching domain. In my head

>> > this

>> > shouldnt be an issue because you just configure the computers via group

>> > policy to point to the wsus server and it really doesnt matter what

>> > domain

>> > its in because its http (right?).

>> >

>> > To save myself dns hasstles I configured automatic updates via group

>> > policy

>> > for this lab in the teaching domain, setting the update location to be

>> > http://<ipaddress_of_WSUS_server>. The WSUS server update site is

>> > configured

>> > as the default site on port 80.

>> >

>> > All of the computers in the lab have recieved updates from the WSUS

>> > server

>> > and have installed them automatically as they should (i know this

>> > because

>> > thier ip range does not have internet access so if not for the wsus

>> > server

>> > its impossible to download updates). Last night at the scheduled time

>> > they

>> > all rebooted and installed 12 updates that they had scheduled.

>> >

>> > heres the interesting part...10 of the computers are all dell Optiplex

>> > GX280's and one is a Dell Optiplex 170L. The 170L (bps1263-11) ALWAYS

>> > shows

>> > up in the update services console. However bps1263-xx (where xx=1-10)

>> > show

>> > up in the console, but no more than one at a time. I.e. bps1263-00

>> > will

>> > show up for a while, then that will be gone and bps1263-07 will show

>> > up,

>> > then

>> > that will be gone and bps1263-04 will show up and on and on.

>> >

>> > All of these computers were imaged using sysprep. So although they all

>> > use

>> > the same image they all have unique sid's and the like because they all

>> > went

>> > through the mini-windows welcome setup after they were imaged.

>> >

>> > Any ideas here? This is blowing my mind! :)

>> >

>> > TIA - Ehren

>>

>>

>>

[Guest Ehren]

Re: WSUS 3 - showing computers but only one at a time

 

They only key that was there was the susid one, and they were all the same.

So i deleted them and we will see if they all check in by the morning. I

will post back when I know. Thanks

 

"WorkingHard" wrote:

> it's vbs Visual Basic script

>

> Just check the registry I can't get to a WSUS 3 client right now to look

> myself.

>

>

> "Ehren" <Ehren@discussions.microsoft.com> wrote in message

> news:8E0E5EAA-1436-47E2-A629-97DEE646D40F@microsoft.com...

> >I have WSUS 3 but maybe its the same

> >

> > what file extension would that script have when saved?

> >

> > Thanks

> >

> > "WorkingHard" wrote:

> >

> >> What going on is that the WSUS ID is not unique ... is created when the

> >> PC

> >> is first connected to WSUS and not there after. So if your master imahe

> >> had

> >> a WSUS ID now all your image created PC's have the same ones. For WSUS 2

> >> the

> >> fix is as follows:

> >> use regedit and go to

> >> HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate

> >> delete the following entries

> >> "PingID"

> >> "AccountDomainSid"

> >> "SusClientId"

> >> then retart the two services /restart PC

> >> For good measure you can also run wuauclt.exe /resetauthorization

> >> /detectnow

> >> in the command console

> >>

> >> This can be scripted and various scripts can be found on line

> >>

> >> http://www.wsus.info/forums/lofiversion/index.php?t8698.html

> >>

> >> run it as a start up script and it will fix stuf. This is how we do it.

> >>

> >>

> >> "Ehren" <Ehren@discussions.microsoft.com> wrote in message

> >> news:AB820213-454C-4392-9EB5-BB76B88703E7@microsoft.com...

> >> > Hello-

> >> >

> >> > I have a very strange issue that I have never seen before and wonder if

> >> > anyone else has any experience with it.

> >> >

> >> > We have several computer labs here, each with 10-12 computers. We have

> >> > a

> >> > main domain, call it "maindomain" and then we have a separate domain

> >> > for

> >> > the

> >> > labs ... call it "teaching". The WSUS server is in the maindomain and

> >> > obviously the lab computers are in the teaching domain. In my head

> >> > this

> >> > shouldnt be an issue because you just configure the computers via group

> >> > policy to point to the wsus server and it really doesnt matter what

> >> > domain

> >> > its in because its http (right?).

> >> >

> >> > To save myself dns hasstles I configured automatic updates via group

> >> > policy

> >> > for this lab in the teaching domain, setting the update location to be

> >> > http://<ipaddress_of_WSUS_server>. The WSUS server update site is

> >> > configured

> >> > as the default site on port 80.

> >> >

> >> > All of the computers in the lab have recieved updates from the WSUS

> >> > server

> >> > and have installed them automatically as they should (i know this

> >> > because

> >> > thier ip range does not have internet access so if not for the wsus

> >> > server

> >> > its impossible to download updates). Last night at the scheduled time

> >> > they

> >> > all rebooted and installed 12 updates that they had scheduled.

> >> >

> >> > heres the interesting part...10 of the computers are all dell Optiplex

> >> > GX280's and one is a Dell Optiplex 170L. The 170L (bps1263-11) ALWAYS

> >> > shows

> >> > up in the update services console. However bps1263-xx (where xx=1-10)

> >> > show

> >> > up in the console, but no more than one at a time. I.e. bps1263-00

> >> > will

> >> > show up for a while, then that will be gone and bps1263-07 will show

> >> > up,

> >> > then

> >> > that will be gone and bps1263-04 will show up and on and on.

> >> >

> >> > All of these computers were imaged using sysprep. So although they all

> >> > use

> >> > the same image they all have unique sid's and the like because they all

> >> > went

> >> > through the mini-windows welcome setup after they were imaged.

> >> >

> >> > Any ideas here? This is blowing my mind! :)

> >> >

> >> > TIA - Ehren

> >>

> >>

> >>

>

>

>

[Guest WorkingHard]

Re: WSUS 3 - showing computers but only one at a time

 

Kind of normal. When you delete those keys that's the only one that returns.

The other ones might be remainders of WSUS 1 or so. I'm not sure.

"Ehren" <Ehren@discussions.microsoft.com> wrote in message

news:021148E8-A913-4D85-B64E-328F7F721718@microsoft.com...

> They only key that was there was the susid one, and they were all the

> same.

> So i deleted them and we will see if they all check in by the morning. I

> will post back when I know. Thanks

>

> "WorkingHard" wrote:

>

>> it's vbs Visual Basic script

>>

>> Just check the registry I can't get to a WSUS 3 client right now to look

>> myself.

>>

>>

>> "Ehren" <Ehren@discussions.microsoft.com> wrote in message

>> news:8E0E5EAA-1436-47E2-A629-97DEE646D40F@microsoft.com...

>> >I have WSUS 3 but maybe its the same

>> >

>> > what file extension would that script have when saved?

>> >

>> > Thanks

>> >

>> > "WorkingHard" wrote:

>> >

>> >> What going on is that the WSUS ID is not unique ... is created when

>> >> the

>> >> PC

>> >> is first connected to WSUS and not there after. So if your master

>> >> imahe

>> >> had

>> >> a WSUS ID now all your image created PC's have the same ones. For WSUS

>> >> 2

>> >> the

>> >> fix is as follows:

>> >> use regedit and go to

>> >> HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate

>> >> delete the following entries

>> >> "PingID"

>> >> "AccountDomainSid"

>> >> "SusClientId"

>> >> then retart the two services /restart PC

>> >> For good measure you can also run wuauclt.exe /resetauthorization

>> >> /detectnow

>> >> in the command console

>> >>

>> >> This can be scripted and various scripts can be found on line

>> >>

>> >> http://www.wsus.info/forums/lofiversion/index.php?t8698.html

>> >>

>> >> run it as a start up script and it will fix stuf. This is how we do

>> >> it.

>> >>

>> >>

>> >> "Ehren" <Ehren@discussions.microsoft.com> wrote in message

>> >> news:AB820213-454C-4392-9EB5-BB76B88703E7@microsoft.com...

>> >> > Hello-

>> >> >

>> >> > I have a very strange issue that I have never seen before and wonder

>> >> > if

>> >> > anyone else has any experience with it.

>> >> >

>> >> > We have several computer labs here, each with 10-12 computers. We

>> >> > have

>> >> > a

>> >> > main domain, call it "maindomain" and then we have a separate domain

>> >> > for

>> >> > the

>> >> > labs ... call it "teaching". The WSUS server is in the maindomain

>> >> > and

>> >> > obviously the lab computers are in the teaching domain. In my head

>> >> > this

>> >> > shouldnt be an issue because you just configure the computers via

>> >> > group

>> >> > policy to point to the wsus server and it really doesnt matter what

>> >> > domain

>> >> > its in because its http (right?).

>> >> >

>> >> > To save myself dns hasstles I configured automatic updates via group

>> >> > policy

>> >> > for this lab in the teaching domain, setting the update location to

>> >> > be

>> >> > http://<ipaddress_of_WSUS_server>. The WSUS server update site is

>> >> > configured

>> >> > as the default site on port 80.

>> >> >

>> >> > All of the computers in the lab have recieved updates from the WSUS

>> >> > server

>> >> > and have installed them automatically as they should (i know this

>> >> > because

>> >> > thier ip range does not have internet access so if not for the wsus

>> >> > server

>> >> > its impossible to download updates). Last night at the scheduled

>> >> > time

>> >> > they

>> >> > all rebooted and installed 12 updates that they had scheduled.

>> >> >

>> >> > heres the interesting part...10 of the computers are all dell

>> >> > Optiplex

>> >> > GX280's and one is a Dell Optiplex 170L. The 170L (bps1263-11)

>> >> > ALWAYS

>> >> > shows

>> >> > up in the update services console. However bps1263-xx (where

>> >> > xx=1-10)

>> >> > show

>> >> > up in the console, but no more than one at a time. I.e. bps1263-00

>> >> > will

>> >> > show up for a while, then that will be gone and bps1263-07 will show

>> >> > up,

>> >> > then

>> >> > that will be gone and bps1263-04 will show up and on and on.

>> >> >

>> >> > All of these computers were imaged using sysprep. So although they

>> >> > all

>> >> > use

>> >> > the same image they all have unique sid's and the like because they

>> >> > all

>> >> > went

>> >> > through the mini-windows welcome setup after they were imaged.

>> >> >

>> >> > Any ideas here? This is blowing my mind! :)

>> >> >

>> >> > TIA - Ehren

>> >>

>> >>

>> >>

>>

>>

>>