Jump to content

Print Spooler won't start; dependent on lexbces.exe but that won't start either; So why?

Guest Nehmo

By Guest Nehmo
in Windows XP

 Share

Recommended Posts

Guest Nehmo

Guest Nehmo

Posted
Posted

Print Spooler won't start; dependent on lexbces.exe but that won't start either; So why?

 

Windows XP Home SP2

I have two Lexmark printers installed (or at least I used to).

Actually, I have the Lexmark folders in Program Files, but the

printers don't seem to be installed anymore. The printers are

Lexmark 640 series

Lexmark 2400 series

They pretty much worked until just now.

In the Printer and Faxes folder I only see the Add Printer and nothing

else.

When I try to start Add Printer, I get an alert saying the Printer

Spool service isn't running.

When I go to (run) services.msc , I find that Print Spooler is

stopped. (It's stopped and) It won't start because it depends on

(Properties > Dependencies) LexBce Server, which apparently is

Lexbces.exe located in

C:\Program Files\Lexmark 640 Series\Drivers or actually that's where

Lexbce.ex_ is 149 KB. What does the underscore mean on the end of an

exe (replacing the final e)?

Anyway, in C:\WINDOWS\system32\spool\drivers

\w32x86\lexmark_640_seriesc231, there is LEXBCES.EXE size: 304 KB .

lexbces.exe also exists elsewhere:

LEXBCES.EXE C:\WINDOWS\system32\spool

\drivers

\w32x86\3

304 KB

LEXBCES.EXE C:\WINDOWS\system32\spool

\drivers

\w32x86\lexmark_640_seriesc231

304 KB

LEXBCES.EXE C:\WINDOWS\system32\spool

\drivers

\w32x86\lexmark_z600_series73d8

296 KB

When I try to start it by double-clicking on it, a command or DOS

window opens briefly and then closes. Task Manager shows the service

is not running.

So how do I start the service lexbces.exe , so I can start the service

printer spool, so I can print?

 

--

(||) Nehmo (||)

  • Replies 7
  • Created
  • Last Reply

Popular Days

Popular Days

Guest Cari \(MS-MVP\)

Guest Cari \(MS-MVP\)

Posted
Posted

Re: Print Spooler won't start; dependent on lexbces.exe but that won't start either; So why?

 

Re: Print Spooler won't start; dependent on lexbces.exe but that won't start either; So why?

 

See Steps 15 thru 17 at:

http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

--

Cari (MS-MVP)

Windows Technologies - Printing & Imaging

http://www.coribright.com/windows

 

"Nehmo" <nehmo54@hotmail.com> wrote in message

news:1185318859.387165.250620@m3g2000hsh.googlegroups.com...

> Windows XP Home SP2

> I have two Lexmark printers installed (or at least I used to).

> Actually, I have the Lexmark folders in Program Files, but the

> printers don't seem to be installed anymore. The printers are

> Lexmark 640 series

> Lexmark 2400 series

> They pretty much worked until just now.

> In the Printer and Faxes folder I only see the Add Printer and nothing

> else.

> When I try to start Add Printer, I get an alert saying the Printer

> Spool service isn't running.

> When I go to (run) services.msc , I find that Print Spooler is

> stopped. (It's stopped and) It won't start because it depends on

> (Properties > Dependencies) LexBce Server, which apparently is

> Lexbces.exe located in

> C:\Program Files\Lexmark 640 Series\Drivers or actually that's where

> Lexbce.ex_ is 149 KB. What does the underscore mean on the end of an

> exe (replacing the final e)?

> Anyway, in C:\WINDOWS\system32\spool\drivers

> \w32x86\lexmark_640_seriesc231, there is LEXBCES.EXE size: 304 KB .

> lexbces.exe also exists elsewhere:

> LEXBCES.EXE C:\WINDOWS\system32\spool

> \drivers

> \w32x86\3

> 304 KB

> LEXBCES.EXE C:\WINDOWS\system32\spool

> \drivers

> \w32x86\lexmark_640_seriesc231

> 304 KB

> LEXBCES.EXE C:\WINDOWS\system32\spool

> \drivers

> \w32x86\lexmark_z600_series73d8

> 296 KB

> When I try to start it by double-clicking on it, a command or DOS

> window opens briefly and then closes. Task Manager shows the service

> is not running.

> So how do I start the service lexbces.exe , so I can start the service

> printer spool, so I can print?

>

> --

> (||) Nehmo (||)

>

Guest Verity

Guest Verity

Posted
Posted

Re: Print Spooler won't start; dependent on lexbces.exe but that w

 

Re: Print Spooler won't start; dependent on lexbces.exe but that w

 

The lexbces.exe (or some similar variation) should be listed in services -

starting that service should allow you the ability to start the printer

spooler service as well. Also check that these services are not "unchecked"

in the msconfig services tab.

Back in the printer list, hit view, then refresh to restore installed

printers. This has worked for me just recently.

 

"Cari (MS-MVP)" wrote:

> See Steps 15 thru 17 at:

> http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

> --

> Cari (MS-MVP)

> Windows Technologies - Printing & Imaging

> http://www.coribright.com/windows

>

> "Nehmo" <nehmo54@hotmail.com> wrote in message

> news:1185318859.387165.250620@m3g2000hsh.googlegroups.com...

> > Windows XP Home SP2

> > I have two Lexmark printers installed (or at least I used to).

> > Actually, I have the Lexmark folders in Program Files, but the

> > printers don't seem to be installed anymore. The printers are

> > Lexmark 640 series

> > Lexmark 2400 series

> > They pretty much worked until just now.

> > In the Printer and Faxes folder I only see the Add Printer and nothing

> > else.

> > When I try to start Add Printer, I get an alert saying the Printer

> > Spool service isn't running.

> > When I go to (run) services.msc , I find that Print Spooler is

> > stopped. (It's stopped and) It won't start because it depends on

> > (Properties > Dependencies) LexBce Server, which apparently is

> > Lexbces.exe located in

> > C:\Program Files\Lexmark 640 Series\Drivers or actually that's where

> > Lexbce.ex_ is 149 KB. What does the underscore mean on the end of an

> > exe (replacing the final e)?

> > Anyway, in C:\WINDOWS\system32\spool\drivers

> > \w32x86\lexmark_640_seriesc231, there is LEXBCES.EXE size: 304 KB .

> > lexbces.exe also exists elsewhere:

> > LEXBCES.EXE C:\WINDOWS\system32\spool

> > \drivers

> > \w32x86\3

> > 304 KB

> > LEXBCES.EXE C:\WINDOWS\system32\spool

> > \drivers

> > \w32x86\lexmark_640_seriesc231

> > 304 KB

> > LEXBCES.EXE C:\WINDOWS\system32\spool

> > \drivers

> > \w32x86\lexmark_z600_series73d8

> > 296 KB

> > When I try to start it by double-clicking on it, a command or DOS

> > window opens briefly and then closes. Task Manager shows the service

> > is not running.

> > So how do I start the service lexbces.exe , so I can start the service

> > printer spool, so I can print?

> >

> > --

> > (||) Nehmo (||)

> >

>

>

Guest Nehmo

Guest Nehmo

Posted
Posted

Re: Print Spooler won't start; dependent on lexbces.exe but that won't start either; So why?

 

Re: Print Spooler won't start; dependent on lexbces.exe but that won't start either; So why?

 

On Jul 24, 8:44 pm, "Cari \(MS-MVP\)" <NewsGro...@coribright.com>

wrote:

> See Steps 15 thru 17 at:http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

> --

> Cari (MS-MVP)

> Windows Technologies - Printing & Imaginghttp://www.coribright.com/windows

>

> "Nehmo" <nehm...@hotmail.com> wrote in message

>

> news:1185318859.387165.250620@m3g2000hsh.googlegroups.com...

>

> > Windows XP Home SP2

> > I have two Lexmark printers installed (or at least I used to).

> > Actually, I have the Lexmark folders in Program Files, but the

> > printers don't seem to be installed anymore. The printers are

> > Lexmark 640 series

> > Lexmark 2400 series

> > They pretty much worked until just now.

> > In the Printer and Faxes folder I only see the Add Printer and nothing

> > else.

> > When I try to start Add Printer, I get an alert saying the Printer

> > Spool service isn't running.

> > When I go to (run) services.msc , I find that Print Spooler is

> > stopped. (It's stopped and) It won't start because it depends on

> > (Properties > Dependencies) LexBce Server, which apparently is

> > Lexbces.exe located in

> > C:\Program Files\Lexmark 640 Series\Drivers or actually that's where

> > Lexbce.ex_ is 149 KB. What does the underscore mean on the end of an

> > exe (replacing the final e)?

> > Anyway, in C:\WINDOWS\system32\spool\drivers

> > \w32x86\lexmark_640_seriesc231, there is LEXBCES.EXE size: 304 KB .

> > lexbces.exe also exists elsewhere:

> > LEXBCES.EXE C:\WINDOWS\system32\spool

> > \drivers

> > \w32x86\3

> > 304 KB

> > LEXBCES.EXE C:\WINDOWS\system32\spool

> > \drivers

> > \w32x86\lexmark_640_seriesc231

> > 304 KB

> > LEXBCES.EXE C:\WINDOWS\system32\spool

> > \drivers

> > \w32x86\lexmark_z600_series73d8

> > 296 KB

> > When I try to start it by double-clicking on it, a command or DOS

> > window opens briefly and then closes. Task Manager shows the service

> > is not running.

> > So how do I start the service lexbces.exe , so I can start the service

> > printer spool, so I can print?

>

> > --

> > (||) Nehmo (||)

 

I followed step 16

"

key the command

sc config spooler depend= RPCSS

(note the space after the = but not before) "

And it worked in a sense. The print spooler is there. But the printer

still didn't work so I tried to uninstall and re-install. I seem to

have un installed all right but when I tried to re-install the last

part of the install failed. I didn't get the confirmation notice that

the install was complete and the installation just stopped. This guy

seems to have had the same problem with a different Lexmark

http://forums.techguy.org/windows-nt-2000-xp/186929-solved-print-monitor-unknown.html

 

When I try to add printer the result is a failure and the message: The

specified print monitor is unknown.

 

The other guy who had the similar problem, Ding28, ran System File

Checker (sfc) and re-installed windows.

That may be difficult. This is a Compaq PPresario V2000 laptop that

didn't come with an installation CD. I kinda wonder if that was

necessary too.

I may try sfc. I don't see how it could hurt.

 

By the way, my other printer the Lexmark 2400 now works. However, I

need to use the 640. I need to print on the back and the front. The

2400 doesn't align both sides well.

--

Nehmo

Guest Mark L. Ferguson

Guest Mark L. Ferguson

Posted
Posted

Re: Print Spooler won't start; dependent on lexbces.exe but that won't start either; So why?

 

Re: Print Spooler won't start; dependent on lexbces.exe but that won't start either; So why?

 

Try this fix:

run devmgmt.msc, Ports(COM & LPT). select the printer port, e.g. ECP Printer

Port (LPT1). Port Settings tab check the 'Enable legacy Plug and Play

detection'

 

--

Mark L. Ferguson

e-mail subject line must include "QZ" or it's deleted

..

"Nehmo" <nehmo54@hotmail.com> wrote in message

news:1185386193.206383.47230@q75g2000hsh.googlegroups.com...

> On Jul 24, 8:44 pm, "Cari \(MS-MVP\)" <NewsGro...@coribright.com>

> wrote:

>> See Steps 15 thru 17

>> at:http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

>> --

>> Cari (MS-MVP)

>> Windows Technologies - Printing &

>> Imaginghttp://www.coribright.com/windows

>>

>> "Nehmo" <nehm...@hotmail.com> wrote in message

>>

>> news:1185318859.387165.250620@m3g2000hsh.googlegroups.com...

>>

>> > Windows XP Home SP2

>> > I have two Lexmark printers installed (or at least I used to).

>> > Actually, I have the Lexmark folders in Program Files, but the

>> > printers don't seem to be installed anymore. The printers are

>> > Lexmark 640 series

>> > Lexmark 2400 series

>> > They pretty much worked until just now.

>> > In the Printer and Faxes folder I only see the Add Printer and nothing

>> > else.

>> > When I try to start Add Printer, I get an alert saying the Printer

>> > Spool service isn't running.

>> > When I go to (run) services.msc , I find that Print Spooler is

>> > stopped. (It's stopped and) It won't start because it depends on

>> > (Properties > Dependencies) LexBce Server, which apparently is

>> > Lexbces.exe located in

>> > C:\Program Files\Lexmark 640 Series\Drivers or actually that's where

>> > Lexbce.ex_ is 149 KB. What does the underscore mean on the end of an

>> > exe (replacing the final e)?

>> > Anyway, in C:\WINDOWS\system32\spool\drivers

>> > \w32x86\lexmark_640_seriesc231, there is LEXBCES.EXE size: 304 KB .

>> > lexbces.exe also exists elsewhere:

>> > LEXBCES.EXE C:\WINDOWS\system32\spool

>> > \drivers

>> > \w32x86\3

>> > 304 KB

>> > LEXBCES.EXE C:\WINDOWS\system32\spool

>> > \drivers

>> > \w32x86\lexmark_640_seriesc231

>> > 304 KB

>> > LEXBCES.EXE C:\WINDOWS\system32\spool

>> > \drivers

>> > \w32x86\lexmark_z600_series73d8

>> > 296 KB

>> > When I try to start it by double-clicking on it, a command or DOS

>> > window opens briefly and then closes. Task Manager shows the service

>> > is not running.

>> > So how do I start the service lexbces.exe , so I can start the service

>> > printer spool, so I can print?

>>

>> > --

>> > (||) Nehmo (||)

>

> I followed step 16

> "

> key the command

> sc config spooler depend= RPCSS

> (note the space after the = but not before) "

> And it worked in a sense. The print spooler is there. But the printer

> still didn't work so I tried to uninstall and re-install. I seem to

> have un installed all right but when I tried to re-install the last

> part of the install failed. I didn't get the confirmation notice that

> the install was complete and the installation just stopped. This guy

> seems to have had the same problem with a different Lexmark

> http://forums.techguy.org/windows-nt-2000-xp/186929-solved-print-monitor-unknown.html

>

> When I try to add printer the result is a failure and the message: The

> specified print monitor is unknown.

>

> The other guy who had the similar problem, Ding28, ran System File

> Checker (sfc) and re-installed windows.

> That may be difficult. This is a Compaq PPresario V2000 laptop that

> didn't come with an installation CD. I kinda wonder if that was

> necessary too.

> I may try sfc. I don't see how it could hurt.

>

> By the way, my other printer the Lexmark 2400 now works. However, I

> need to use the 640. I need to print on the back and the front. The

> 2400 doesn't align both sides well.

> --

> Nehmo

>

Guest Nehmo

Guest Nehmo

Posted
Posted

Re: Print Spooler won't start; dependent on lexbces.exe but that won't start either; So why?

 

Re: Print Spooler won't start; dependent on lexbces.exe but that won't start either; So why?

 

On Jul 24, 11:11 pm, "William R. Walsh"

<newsgrou...@idontwantjunqueemail.walshcomptech.com> wrote:

> Hi!

>

> > They pretty much worked until just now.

>

> It sounds like their drivers have become corrupted. Have you tried

> uninstalling and reinstalling each printer's software?

>

> I would also recommend using the latest available release of printer

> software you can get. Download a fresh copy from the Lexmark web site.

>

> > What does the underscore mean on the end of an exe (replacing the final

>

> e)?

>

> That's a Microsoft compressed file. Such files are compressed with the

> utility known as COMPRESS and expanded with the unsurprisingly named EXPAND

> command-line tool. All recent releases of Windows have this tool if you want

> to expand the file.

>

> Windows will also expand these files when it needs to, usually during a

> setup operation.

>

> > When I try to start it by double-clicking on it, a command or DOS

> > window opens briefly and then closes.

>

> The program you are trying to run may simply not be intended to be run

> directly. Some programs will print messages to the window you saw, but it

> goes away so quickly that you cannot tell for sure. Try opening a command

> line and running the program from there if you are curious.

>

> It really sounds like you need to uninstall and reinstall your printer

> drivers.

>

> William

 

I uninstalled and then I rebooted. I forgot I had the add new hardware

set to automatically add, which it did, but I doubt it was the

software I downloaded from the lexmark site.

 

I suppose I should try again? Uninstall via Add and remove programs >

disable add new hardware automatically > install the downloaded

software.

 

I crossposted this to Newsgroups:

microsoft.public.windowsxp.print_fax,

microsoft.public.windowsxp.general,

microsoft.public.windowsxp.help_and_support, comp.periphs.printers;

--

Nehmo

Guest Nehmo

Guest Nehmo

Posted
Posted

Re: Print Spooler won't start; dependent on lexbces.exe but that won't start either; So why?

 

Re: Print Spooler won't start; dependent on lexbces.exe but that won't start either; So why?

 

On Jul 25, 1:07 pm, "Mark L. Ferguson" <marfer_...@Yahoo.com> wrote:

> Try this fix:

> run devmgmt.msc, Ports(COM & LPT). select the printer port, e.g. ECP Printer

> Port (LPT1). Port Settings tab check the 'Enable legacy Plug and Play

> detection'

>

> --

> Mark L. Ferguson

> e-mail subject line must include "QZ" or it's deleted

> ."Nehmo" <nehm...@hotmail.com> wrote in message

>

> news:1185386193.206383.47230@q75g2000hsh.googlegroups.com...

>

> > On Jul 24, 8:44 pm, "Cari \(MS-MVP\)" <NewsGro...@coribright.com>

> > wrote:

> >> See Steps 15 thru 17

> >> at:http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

> >> --

> >> Cari (MS-MVP)

> >> Windows Technologies - Printing &

> >> Imaginghttp://www.coribright.com/windows

>

> >> "Nehmo" <nehm...@hotmail.com> wrote in message

>

> >>news:1185318859.387165.250620@m3g2000hsh.googlegroups.com...

>

> >> > Windows XP Home SP2

> >> > I have two Lexmark printers installed (or at least I used to).

> >> > Actually, I have the Lexmark folders in Program Files, but the

> >> > printers don't seem to be installed anymore. The printers are

> >> > Lexmark 640 series

> >> > Lexmark 2400 series

> >> > They pretty much worked until just now.

> >> > In the Printer and Faxes folder I only see the Add Printer and nothing

> >> > else.

> >> > When I try to start Add Printer, I get an alert saying the Printer

> >> > Spool service isn't running.

> >> > When I go to (run) services.msc , I find that Print Spooler is

> >> > stopped. (It's stopped and) It won't start because it depends on

> >> > (Properties > Dependencies) LexBce Server, which apparently is

> >> > Lexbces.exe located in

> >> > C:\Program Files\Lexmark 640 Series\Drivers or actually that's where

> >> > Lexbce.ex_ is 149 KB. What does the underscore mean on the end of an

> >> > exe (replacing the final e)?

> >> > Anyway, in C:\WINDOWS\system32\spool\drivers

> >> > \w32x86\lexmark_640_seriesc231, there is LEXBCES.EXE size: 304 KB .

> >> > lexbces.exe also exists elsewhere:

> >> > LEXBCES.EXE C:\WINDOWS\system32\spool

> >> > \drivers

> >> > \w32x86\3

> >> > 304 KB

> >> > LEXBCES.EXE C:\WINDOWS\system32\spool

> >> > \drivers

> >> > \w32x86\lexmark_640_seriesc231

> >> > 304 KB

> >> > LEXBCES.EXE C:\WINDOWS\system32\spool

> >> > \drivers

> >> > \w32x86\lexmark_z600_series73d8

> >> > 296 KB

> >> > When I try to start it by double-clicking on it, a command or DOS

> >> > window opens briefly and then closes. Task Manager shows the service

> >> > is not running.

> >> > So how do I start the service lexbces.exe , so I can start the service

> >> > printer spool, so I can print?

>

> >> > --

> >> > (||) Nehmo (||)

>

> > I followed step 16

> > "

> > key the command

> > sc config spooler depend= RPCSS

> > (note the space after the = but not before) "

> > And it worked in a sense. The print spooler is there. But the printer

> > still didn't work so I tried to uninstall and re-install. I seem to

> > have un installed all right but when I tried to re-install the last

> > part of the install failed. I didn't get the confirmation notice that

> > the install was complete and the installation just stopped. This guy

> > seems to have had the same problem with a different Lexmark

> >http://forums.techguy.org/windows-nt-2000-xp/186929-solved-print-moni...

>

> > When I try to add printer the result is a failure and the message: The

> > specified print monitor is unknown.

>

> > The other guy who had the similar problem, Ding28, ran System File

> > Checker (sfc) and re-installed windows.

> > That may be difficult. This is a Compaq PPresario V2000 laptop that

> > didn't come with an installation CD. I kinda wonder if that was

> > necessary too.

> > I may try sfc. I don't see how it could hurt.

>

> > By the way, my other printer the Lexmark 2400 now works. However, I

> > need to use the 640. I need to print on the back and the front. The

> > 2400 doesn't align both sides well.

> > --

> > Nehmo

 

I can't find Ports, except for USB.

Guest Nehmo

Guest Nehmo

Posted
Posted

Re: Print Spooler won't start; dependent on lexbces.exe but that won't start either; So why?

 

Re: Print Spooler won't start; dependent on lexbces.exe but that won't start either; So why?

 

On Jul 25, 3:44 pm, Nehmo <nehm...@hotmail.com> wrote:

> On Jul 24, 11:11 pm, "William R. Walsh"

>

>

>

> <newsgrou...@idontwantjunqueemail.walshcomptech.com> wrote:

> > Hi!

>

> > > They pretty much worked until just now.

>

> > It sounds like their drivers have become corrupted. Have you tried

> > uninstalling and reinstalling each printer's software?

>

> > I would also recommend using the latest available release of printer

> > software you can get. Download a fresh copy from the Lexmark web site.

>

> > > What does the underscore mean on the end of an exe (replacing the final

>

> > e)?

>

> > That's a Microsoft compressed file. Such files are compressed with the

> > utility known as COMPRESS and expanded with the unsurprisingly named EXPAND

> > command-line tool. All recent releases of Windows have this tool if you want

> > to expand the file.

>

> > Windows will also expand these files when it needs to, usually during a

> > setup operation.

>

> > > When I try to start it by double-clicking on it, a command or DOS

> > > window opens briefly and then closes.

>

> > The program you are trying to run may simply not be intended to be run

> > directly. Some programs will print messages to the window you saw, but it

> > goes away so quickly that you cannot tell for sure. Try opening a command

> > line and running the program from there if you are curious.

>

> > It really sounds like you need to uninstall and reinstall your printer

> > drivers.

>

> > William

>

> I uninstalled and then I rebooted. I forgot I had the add new hardware

> set to automatically add, which it did, but I doubt it was the

> software I downloaded from the lexmark site.

>

> I suppose I should try again? Uninstall via Add and remove programs >

> disable add new hardware automatically > install the downloaded

> software.

>

> I crossposted this to Newsgroups:

> microsoft.public.windowsxp.print_fax,

> microsoft.public.windowsxp.general,

> microsoft.public.windowsxp.help_and_support, comp.periphs.printers;

> --

> Nehmo

I've tired to uninstall and reinstall a few times now with no success.

I keep getting the message:

"An error occurred during the installation of the device

The specified print monitor is unknown."

 

As I said, I now have the 2400 printer working. So the problem has to

be with the 640 software. I'm going to start a new thread regarding

"specified print monitor is unknown." I don't know what that means,

and so far searches haven't helped me.

--

Nehmo

 Share
Go to topic listing
×
×
  • Create New...