Guest Langforc Posted July 25, 2007 Posted July 25, 2007 I have a Dell Laptop with secondary screen attached. Everytime I unplug the screen from the laptop and reconnect the screen the position defaults to the right of the primary laptop screen. I have to manually move it to the top and enable it. I have to do this about 5 times a day due to work. Was wondering if anyone had a reg. entry to change the default position of the secondary screen or even a batch file i can click on to set position.
Guest M.I.5¾ Posted July 25, 2007 Posted July 25, 2007 Re: Position of Displays in XP "Langforc" <Langforc@discussions.microsoft.com> wrote in message news:F3A5D3AA-86AE-470E-B727-1D8A9B74D2ED@microsoft.com... >I have a Dell Laptop with secondary screen attached. Everytime I unplug the > screen from the laptop and reconnect the screen the position defaults to > the > right of the primary laptop screen. I have to manually move it to the top > and > enable it. I have to do this about 5 times a day due to work. > > Was wondering if anyone had a reg. entry to change the default position of > the secondary screen or even a batch file i can click on to set position. > Unfortunately, this is the default position for a secondary monitor and it will always revert to this location. The only way, that I know of keeping it in your chosen position is to switch off the secondary monitor without disconnecting it or disabling it in windows. The down side is that it is possible for windows to open on the secondary monitor and not be visible. Unles someone knows different of course ...
Guest RalfG Posted July 25, 2007 Posted July 25, 2007 Re: Position of Displays in XP Buggy display drivers excluded, Windows won't normally jump to the secondary display on its own. I've seen it happen the odd time during a messy driver update, but that was rare. It's only a matter of putting a check mark in a box to switch the secondary display to the primary though. I suspect the display positions are resetting to default on this system because Windows is switching back to single monitor mode in between dual monitor sessions. Depending on what options are available in the advanced display settings for your adpater you might be able to bypass auto-detection and force the secondary display to remain on. OTOH, with power consumption being a consideration for laptops that might not be desireable. "M.I.5¾" <no.one@no.where.NO_SPAM.co.uk> wrote in message news:46a71b71$1_1@glkas0286.greenlnk.net... > > "Langforc" <Langforc@discussions.microsoft.com> wrote in message > news:F3A5D3AA-86AE-470E-B727-1D8A9B74D2ED@microsoft.com... >>I have a Dell Laptop with secondary screen attached. Everytime I unplug >>the >> screen from the laptop and reconnect the screen the position defaults to >> the >> right of the primary laptop screen. I have to manually move it to the top >> and >> enable it. I have to do this about 5 times a day due to work. >> >> Was wondering if anyone had a reg. entry to change the default position >> of >> the secondary screen or even a batch file i can click on to set position. >> > > Unfortunately, this is the default position for a secondary monitor and it > will always revert to this location. The only way, that I know of keeping > it in your chosen position is to switch off the secondary monitor without > disconnecting it or disabling it in windows. The down side is that it is > possible for windows to open on the secondary monitor and not be visible. > > Unles someone knows different of course ... > >
Guest M.I.5¾ Posted July 25, 2007 Posted July 25, 2007 Re: Position of Displays in XP "RalfG" <itsnotme@bin-wieder-da.de> wrote in message news:%23MD1M8rzHHA.1164@TK2MSFTNGP02.phx.gbl... > Buggy display drivers excluded, Windows won't normally jump to the > secondary display on its own. I've seen it happen the odd time during a > messy driver update, but that was rare. It's only a matter of putting a > check mark in a box to switch the secondary display to the primary though. > I would have agreed with you - 6 months ago. But it happened to me when Windows Media Player just displayed a black picture after a complete Windows rebuild. It turned out that the picture was on the (non existent up to that point) secondary monitor. I had to connect one up just to get the picture back. It has happened to a friend of mine, and it happened to a subscriber to comp.sys.laptops a couple of months ago. > I suspect the display positions are resetting to default on this system > because Windows is switching back to single monitor mode in between dual > monitor sessions. Depending on what options are available in the advanced > display settings for your adpater you might be able to bypass > auto-detection and force the secondary display to remain on. OTOH, with > power consumption being a consideration for laptops that might not be > desireable. > The position switches back to the default location if you disable dual head operation by unchecking the 'Extend my Windows Desktop onto this monitor', or if you physically disconnect the monitor, in which case it auto reverts to single monitor operation. Only if you just switch the secondary monitor off, without disconnecting it, is the dual status remembered. It seems that the graphics card can 'see' that the video lines are still terminated and thus assumes the monitor is still there. This auto detection is a feature of the graphics card and (presumably) its drivers and not windows. I am not aware of a graphics card that doesn't auto detect in this manner, but that doesn't mean that there isn't one. The only down side is that the mouse cursor (and indeed windows) can be lost onto the secondary monitor's desktop space. > "M.I.5¾" <no.one@no.where.NO_SPAM.co.uk> wrote in message > news:46a71b71$1_1@glkas0286.greenlnk.net... >> >> "Langforc" <Langforc@discussions.microsoft.com> wrote in message >> news:F3A5D3AA-86AE-470E-B727-1D8A9B74D2ED@microsoft.com... >>>I have a Dell Laptop with secondary screen attached. Everytime I unplug >>>the >>> screen from the laptop and reconnect the screen the position defaults to >>> the >>> right of the primary laptop screen. I have to manually move it to the >>> top and >>> enable it. I have to do this about 5 times a day due to work. >>> >>> Was wondering if anyone had a reg. entry to change the default position >>> of >>> the secondary screen or even a batch file i can click on to set >>> position. >>> >> >> Unfortunately, this is the default position for a secondary monitor and >> it will always revert to this location. The only way, that I know of >> keeping it in your chosen position is to switch off the secondary monitor >> without disconnecting it or disabling it in windows. The down side is >> that it is possible for windows to open on the secondary monitor and not >> be visible. >> >> Unles someone knows different of course ... >> >> > >
Recommended Posts