Guest szilagyic Posted July 27, 2007 Posted July 27, 2007 Hello: Recently we installed SP2 on our Win 2003 Server. We primarily use the server for doing RIS images, so now that SP2 installed WDS we are trying to get our images converted to Native format (WIM files). However, we can only get one RIS image converted. When we try to convert the second image, we get the error "An error occurred trying to Convert RIPrep Image. 0x80360051" at the very end of the conversion progress bar. The log file shows: [1716] 10:51:14: PerformingImageOperation called. [1716] 10:51:14: 99 [1716] 10:51:14: Total Progress is 0x41 [1716] 10:51:14: EndImageOperation called. [1716] 10:51:14: DISPID_WDS_IMAGEOPERATION_EVENTS_UPDATING_DRIVERS [1716] 10:51:14: StartImageOperation called. [1716] 10:53:20: An error occurred trying to Convert RIPrep Image. 0x80360051 [1716] 10:53:20: -> CEventBase::Register [1716] 10:53:20: Unadvice was successful (cookie is 1) [1716] 10:53:20: <- CEventBase::Register=0 [1716] 10:53:20: <- CDataImageMgr::ConvertRIPrepImage=80360051 [3684] 10:53:20: Create image is complete. [3684] 10:53:20: Operation did not complete successfully. (0x80360051) [3684] 10:53:20: -> GetErrorString [3684] 10:53:20: Failed to Get the Error Message from CErrorMessage 13d [3684] 10:53:20: <- GetErrorString=0 [3684] 10:53:20: -> SetDialogFont [3684] 10:53:20: <- SetDialogFont=0 We get the same result if we try to convert the image in the MMC or with the "wdsutil" command. We've tried about 5 different RIS images and the same error comes up at the very end. I've seen posts all over on this issue, but so far no solution has been posted. Has anybody been able to successfully convert multiple RIS images to WDS (WIM files), without having to do each one on a physical box? Thanks in advance! -- Chris
Guest Keith Gilbank Posted May 14, 2008 Posted May 14, 2008 Conver RiPrep in WDS error 0x80360051 Conver RiPrep in WDS error 0x80360051 Just in case you find yourself converting some old images and you get a nasty little error like this: Error Code: 0x80360051 While "inserting required drivers in the image" Try this: Regedit Select Local Machine Load Hive from within your problem RiPrep Image E.G. \\WDSSERVER\reminst\setup\English\Images\BrokenIMAGE\i386\Mirror1\UserData\WINDOWS\system32\config\system Name it something Find in Regedit under the loaded Hive: HKEY_LOCAL_MACHINE\something\System\ControlSet001\Control\CriticalDeviceDatabase Check every key to ensure that there is a ClassGuid for each, if there isn't then modify the security on the key and delete it. (unless you want to figure out what the ClassGuid should be) Unload hive Go back and convert this image to wim.
Guest Keith Gilbank Posted May 14, 2008 Posted May 14, 2008 Convert RiPrep to .Wim Error Code: 0x80360051 Convert RiPrep to .Wim Error Code: 0x80360051 Just in case you find yourself converting some old images and you get a nasty little error like this: Error Code: 0x80360051 While "inserting required drivers in the image" Try this: Regedit Select Local Machine Load Hive from within your problem RiPrep Image E.G. \\WDSSERVER\reminst\setup\English\Images\BrokenIMAGE\i386\Mirror1\UserData\WINDOWS\system32\config\system Name it something Find in Regedit under the loaded Hive: HKEY_LOCAL_MACHINE\something\System\ControlSet001\Control\CriticalDeviceDatabase Check every key to ensure that there is a ClassGuid for each, if there isn't then modify the security on the key and delete it. (unless you want to figure out what the ClassGuid should be) Unload hive Go back and convert this image to wim.
Guest Torleif Posted May 15, 2008 Posted May 15, 2008 Re: RIS to WIM (WDS) image conversion failure Thank you so much. I've spent three frustrating days looking for a solution to that. Works like a charm!!! -- Torleif ------------------------------------------------------------------------ Torleif's Profile: http://forums.techarena.in/member.php?userid=49310 View this thread: http://forums.techarena.in/showthread.php?t=791055 http://forums.techarena.in
Recommended Posts