boot up problem with Netgear card

[saibhy]

Hi, thanks for your time looking at this page.

 

I tried to install Netgear wg311t adaptor so i can have wireless connection for internet, after installing the software wich came with the card it asked me to turn off pc and install the card into the pci slot.

when i installed it in the pci slot and tried to turn on the pc, it goes up to windows boot screen then jus stucks there with no response. when i took the card out and turned on the pc it booted up normal.

 

so does any1 have any clue how to slove this problem.

 

mobo: asus p5e ws pro

Edited May 31, 2008 by saibhy

[maynardvdm]

Hi

 

Make sure the card is correctly in place. The card must be securely in the slot. Dont apply too much pressure so that the motherboad will crack. Tell us if it still does not work.

[Guest Wolfeymole]

Hi saibhy

 

Welcome to Extreme Tech Support - Free PC Help

 

You may need an updated driver for this to work, have a look here;

WG311T

[saibhy]

Yes its inserted properly i have tried both of my pci slots 1-2, same probloem, as for the drivers i have downloaded from the internet (latest ones). Dont i have to change any settings in bios before start up ?

[Guest Wolfeymole]

Did you follow the instructions in that link I gave you and did they not work?

[saibhy]

Yes thats how i did it earlier aswell, probably its broken or something then

[Dalo Harkin]

When you first installed the OS did you install the drivers from the MOBO disk? Chances are that the MOBO needs the PCI drivers and thats whats making it crash

What OS are you running?